Engineering Commons^™

Effects Of Atmospheric Drag On Angles-Only Initial Relative Orbit Determination Accuracy In Low Earth Orbit, Sydney Walsh

Master's Theses

Growing congestion in low Earth orbit is increasing the demand for effective space situational awareness, straining ground station capabilities. Space-based relative orbit determination offers an alternative, using line-of-sight angle measurements from a chaser spacecraft to estimate a target spacecraft's orbit. This research focuses on angles-only initial relative orbit determination (IROD), where no prior target state knowledge is assumed. It investigates how IROD solution accuracy is affected by differential atmospheric drag between the chaser and target spacecraft. A nonlinear batch least squares filter is designed to estimate the target's initial state, which is compared against a truth solution. It was found …

Design And Optimization Of A Bluff Body For Energy Harvesting Of Transverse Galloping Induced By Low-Speed Wind Using Bernstein Polynomial Equations, Youssef Wael Abdelmoneim

Theses and Dissertations

In this thesis, a computational framework is proposed for optimizing the aerodynamic shape of bluff bodies used in galloping-based wind energy harvesters. The system targets low-wind speed environments, where normal wind turbines are not effective, offering a potential alternative to batteries used for powering small electronic devices such as wireless sensors. The design relies on the galloping effect, where airflow around a bluff body induces transverse oscillations that drive an energy conversion mechanism. To generate efficient bluff body geometry, the Class-Shape Transformation (CST) method is used to define a wide range of candidate shapes with minimal design parameters. These shapes …

Short Arc Angles-Only Initial Orbit Determination For Reliable Reacquisition Of Low Earth Orbit Objects, Isabella Rackemann

Master's Theses

Low Earth orbit (LEO) is becoming increasingly congested, furthering the need for accurate tracking and catalog maintenance. Initial orbit determination (IOD) is the first step in this process, providing a preliminary estimate of an object’s state given observations. When it comes to LEO optical observations, a large portion of them are inherently short in duration. Angles-only IOD methods struggle with this data, often producing highly inaccurate solutions that limit reacquisition capabilities. This study expands on prior short arc IOD research, testing seven classical and assumed circular orbit (ACO)-modified angles-only IOD algorithms on real LEO observational data spanning 0-4 degrees of …

A Polygon Approach For Satellite Coverage Computation Problems, Caleb I. Arbreton

Master's Theses

During celestial body observation mission planning, predicted sensor coverage is a key analysis tool used by designers to inform concept of operations. It enables trade studies by applying a metric to assess how well different sensor, satellite, and constellation configurations can observe a mission's region of interest. The effectiveness of the studied components is then paramount in determining whether they are justified in the system architecture. Coverage computation becomes more difficult as sensor types and regions of interest (RoIs) deviate from simple shapes, and as problem formulations seek higher-fidelity results. These simplifications include: conical camera sensors, RoIs represented as simple, …

Optimization Of Repeat Ground Track Constellation Design For Complex Discontinuous Regional Coverage, Paige Jewell

Master's Theses

The continued growth of low Earth orbit (LEO) satellite constellations motivates efficient constellation design methods to reduce cost and complexity. Although brute-force methods are commonly employed in the preliminary design of satellite constellations, pairing analytic methods with optimization algorithms provides a more efficient means of searching the design space. Constellation design for continuous global and regional coverage is well-established; however, strategies for discontinuous regional coverage remain underdeveloped. This thesis focuses on an analytic geometry-based method for computing satellite coverage and revisit metrics, coupled with genetic algorithm optimization to efficiently explore the design space. The viability of this method is shown …

Development Of A Computer Vision Based Rendezvous And Docking Test Platform, David T. Forbes

Master's Theses

This thesis presents the work completed in the development and testing of a low-cost modular sensor package capable of rendezvous and docking by providing a vehicle with relative navigational commands. These navigational commands are created using relative localization data gathered and processed onboard the sensor package, with validation, in post-processing, against global localization data. This research aims to reduce the cost of smaller autonomous vehicles by removing the need for custom control units, as its modular nature will allow it to be adapted to many different systems and vehicles. Discussed within this thesis is the rapid prototyping, development, and testing …

Effects Of Atomic Oxygen Exposure On Stressed Drag Sail Materials For Low Earth Orbit Applications, Nazanin Sadeghian Dezaki

Master's Theses

As low Earth orbit (LEO) has become an increasingly valuable region for satellite operations, it has grown increasingly congested. The Federal Communications Commission (FCC) deorbit regulations require satellites to be deorbited within 5 years of launch, and drag sails represent a practical means of meeting this requirement. An important consideration for drag sail design is the effect of atomic oxygen (AO) on sail materials. To address the gap in the literature regarding the behavior of stressed drag sail materials under AO exposure, a new test plate was manufactured for the California Polytechnic State University minimum atmospheric experimentation (MAX) AO chamber. …

A Higher Order Panel Method With Vortex Particle Wake, Luca Flick-Kaiser

Master's Theses

Panel codes were some of the earliest methods for computing the flow around aircraft. Despite the availability of higher fidelity CFD methods, panel methods remain an essential tool for the development of modern aircraft, allowing engineers to quickly iterate during the conceptual design phase.

This work develops and implements a high order panel method using Python. The wake is modeled using vortex particles, resulting in an accurate wake representation with minimal user input. The integration of the higher order singularity distributions has been extended to include the calculation of the velocity gradients necessary for the vortex particle implementation. The use …

Development Of A Free-Floating Space Robotic Simulator, Truman: Terrestrial Robotic Unit For Multibody Analysis And Navigation, Jackson W. Cordova

Master's Theses

This work describes the development of a 3 Degree-of-Freedom (DOF) robotic manipulator for use on a free-floating planar air-bearing vehicle. The system developed aims to serve as a foundation for future space robotics research at the California Polytechnic State University (Cal Poly)’s Space Robotics Laboratory. Systems doc- umentation describes conceptual operation and architecture of the proposed system: Terrestrial Robotic Unit for Multibody Analysis and Navigation (TRUMAN). The key operation of TRUMAN is to study a self launch maneuver of a free-floating ve- hicle including 4 distinct phases: launch off a fixed rail, coast, reorientation using manipulator motion, and capture of …

Spaceotter: A Floating Spacecraft Simulator Air Bearing Vehicle For Hardware-In-The-Loop Experiments And Research, Alexander Debartolo

Master's Theses

Growing interest in nanosatellites has increased demand for accessible ground-testing methods, which have historically been expensive and restricted. Floating Spacecraft Simulators (FSS), built around Air Bearing Vehicles (ABVs), address this gap by approximating a zero-gravity, friction-minimized environment suitable for testing spacecraft control systems, robotics, and propulsion on the ground.

This thesis presents the design, realization, and initial performance characterization of the Space Optically Tracked Testbed for Experiments and Research (SpaceOTTER) ABV, developed for the Cal Poly Space Robotics Lab. SpaceOTTER is the first step toward emulating the 3 degree of freedom (3-DOF) planar dynamics of a simulated spacecraft and is …

Hamster: Hybrid-Actuated Mobile Spherical Terrain Exploration Rover, Winnie Gao

Master's Theses

The expansion of space exploration to increasingly challenging planetary environments requires mobility systems capable of extreme traversal capabilities and operational reliability. This thesis presents the design, development, and testing of a low-cost Hybrid-Actuated Mobile Spherical Terrain Exploration Rover (HAMSTER) intended for use on a planetary surface exploration mission. HAMSTER uses a pendulum-based actuation method for steering and an actuated internal shaft to propel the vehicle forward. The internal structure includes a two-tiered central case composed of the navigation control module, accelerometer, motor controller, primary DC motor, battery, voltage regulators, Raspberry Pi, pendulum servo motor, and drive shafts. Additive manufacturing through …

Design And Implementation Of An Embedded Control System For The Cal Poly Spacecraft Attitude Dynamics Simulator, Neil Mahesh Bedagkar

Master's Theses

This thesis presents the development of a cascaded reaction wheel control system for Cal Poly's Spacecraft Attitude Dynamics Simulator. This work considers system architecture, empirical modeling, high-fidelity simulation, embedded firmware, hardware integration, and experimental characterization. In discrete-time simulation, it is shown that nonlinear direct model reference adaptive control (NDMRAC) enables a nonlinear, partially known plant with realistic actuator dynamics to track the response of a canonical second-order transfer function, with settling time within 4.67% and percent overshoot within order of magnitude of the second-order response. In hardware, the feasibility of a cascaded reaction wheel control architecture is experimentally demonstrated, achieving …

Development And Verification Of An Updated Thermal Model For Cal Poly's Small Thermal Vacuum Chamber, Bryce G. Leonard

Master's Theses

This thesis discusses modifications made to the Small Thermal Vacuum (TVAC) Chamber in the Space Environments Laboratory at California Polytechnic State University, San Luis Obispo, and the development and verification of an updated thermal model reflecting these changes. The chamber was redesigned to improve thermal performance, featuring a homogeneous aluminum platen coated with Aeroglaze Z306 to enhance radiative heat transfer, along with expanded data acquisition capabilities for temperature and pressure measurements.

A new thermal model of the chamber was developed in SolidWorks using a finite element approach. The model incorporates conductive and radiative heat transfer mechanisms and is configured to …

Design And Development Of A Resonance Ignition System Using Gaseous Propellants, Benjamin J. Hoefer

Master's Theses

This work presents the development and experimental evaluation of a resonance igniter (RI) operating with premixed gaseous propellants. Resonance ignition is a non-electrical ignition concept in which an underexpanded jet impinges on a closed-end Hartmann–Sprenger tube (HST), generating cyclic compression and expansion waves that rapidly heat gas near the tube endwall. A modular experimental system was designed and built to investigate resonance ignition using methane–air and methane–oxygen mixtures. The system includes a supplemental configuration that may probe for mixture conditions favorable to ignition, informing RI testing. Pressure and temperature measurements were used to characterize pressure control, mixture pressure ratio (MPR), …

Aerodynamic Design And Structural Evaluation Of A Global Minimum Torque Inspired Multirotor Propeller, Zeke Bukovansky

Master's Theses

This thesis develops a repeatable design, CAD, aerodynamic postprocessing, structural screening, and manufacturing feasibility workflow for a 22-inch global minimum torque inspired multirotor propeller. Matched MIL and GMT geometries were compared at a 35 N, 4000 rpm static-hover operating condition using BEMT/XFOIL aerodynamic postprocessing, with diameter, blade count, chord distribution, airfoil schedule, and target thrust held constant. The final modeled comparison predicted a modest 1.5% reduction in torque and shaft power for the GMT case while maintaining the same thrust target. CAD construction, MATLAB reduced-order beam model, Abaqus screening, and manufacturing planning were used to identify geometry level structural and …

A2s Uplink Latency Minimization For Wildfire Monitoring Systems Using Mbse And Stochastic Modeling, Luis Giovanni Wang

Master's Theses

Wildfire response depends on how quickly a detection reaches the people who act on it, and the slowest remaining step is often the link that carries an alert from a remote sensing platform to a satellite. This thesis models the latency of that link, the Air-to-Space uplink, for a wildfire-monitoring UAV that carries a Starlink terminal and sends an ALERT packet to a serving Low Earth Orbit satellite. The uplink is difficult to predict because both the UAV and the satellite move, and because the wildfire environment degrades the channel at the moment the data matters most.

The thesis uses …

Entropy-Constrained Closure For Steady, Quasi-One-Dimensional Flow Of Ideal Gases, Andrew A. Oliva

Michigan Tech Publications

An entropy-constrained closure is developed for steady quasi-one-dimensional flow of a calorically perfect ideal gas. Net irreversibility is represented by a prescribed entropy change between the inlet and outlet or, equivalently, by a stagnation pressure ratio together with the stagnation temperature ratio implied by the energy balance equation. The thermodynamic constraint, enforced through Gibbs relation together with conservation of mass and energy, yields an algebraic mapping from the inlet flow state, area ratio and prescribed stagnation property ratios to the outlet flow state. The momentum balance is retained only as an auxiliary post-processing relation and may be used to infer …

Data-Driven Lpv Modeling Via Parametric Dmd And Predictive Control Of Highly Flexible Aircraft, Larry Catalasan, Tianyi He, Weihua Su

Mechanical and Aerospace Engineering Student Publications and Presentations

This paper presents a method of data-driven parametric dynamic mode decomposition (p-DMD) to derive a linear parameter-varying reduced-order model (LPV-ROM) and predictive control for the nonlinear aeroelasticity of highly flexible aircraft. It directly uses the data snapshots obtained at varying flight conditions and encodes a nonlinear model’s polynomial dependency on flight conditions to produce a polynomial-dependent LPV-ROM. The modeling method can handle not only equilibrium flight conditions but also continuously varying flight conditions. In numerical studies, the proposed data-driven p-DMD modeling is applied to a highly flexible cantilever wing perturbed around equilibrium conditions and a flexible aircraft with time-varying angles …

Sentience, Sheetal Agrawal

Masters Theses

The increasing urgency for sustainable and adaptive systems has driven research toward embedding intelligence directly into materials rather than relying solely on external sensing and control systems. This thesis explores how smart material1 embedded systems can be designed to recognize and respond to environmental signatures, defined as measurable patterns such as temperature fluctuations and mechanical forces. Central to this investigation is the integration of shape memory alloys, particularly Nitinol, with geometry-based actuation mechanisms that amplify material behavior into functional system responses.

The central argument is that designing with smart materials is a design problem, not primarily a materials science problem …

Seizing Strategic High Ground Of Space Computing Power: Global Competition Landscape And China’S Path, Yan Chen, Wenbin Song, Ping Zhang

Bulletin of Chinese Academy of Sciences (Chinese Version)

The deep integration of artificial intelligence and commercial aerospace is accelerating the transformation of space computing power from conceptual exploration to engineering verification, becoming a key direction for building an integrated space-air-ground information infrastructure. This study delves into its strategic value, global landscape, industrial chain bottlenecks, and advancement paths. The research reveals that the core value of space computing power does not lie in replacing ground data centers, but rather in focusing on network coverage blind spots, data transmission limitations, and high-timeliness scenarios, providing a new supply model of “in-orbit computing + space-ground collaboration”. Currently, the world has entered a …

The Impact Of Dispatch Weight Restrictions On Derivative Aircraft Propulsion Technology Evaluation, Timothy T. Takahashi

Faculty Publications

This paper arises from an ARPA-E-sponsored project seeking design opportunities to retrofit existing aircraft with hybrid electric propulsion systems. Engineers typically configure aircraft to fly a given payload over a long range, which is subject to field performance constraints. In practice, operators fly transport aircraft (civilian and military) in a manner where dispatch consciously trades payload and/or range to enable safe operations to and from short runways. This work describes a simple yet novel analytical process suitable for inclusion in conceptual design or technology portfolio trade study evaluations to assess the impacts of weight-restricted dispatch upon usable payloads. We find …

Developing And Evaluating U.S. Army Bridging For Ship Simulation, Jacob C. Hodges

Theses and Dissertations

This research investigates the intricacies of ship simulation and developmental processes for integrating wet gap crossing capabilities into a simulated environment. The US Army Mark III Bridge Erection Boat (BEB) and Improved Ribbon Bridge (IRB) were modeled in commercial off the shelf (COTS) and Government Co-Owned (GCO) navigation software suites to determine their performance capabilities and limitations. Each model was constructed using naval architecture concepts to accurately capture their hydrostatic and hydrodynamic effects before being validated against available performance data and expert elicitation from expert US Army watercraft operators. Models were configured and tested in simulated river flows with current …

Development Of Carbon-Fiber-Reinforced Composite Rotor Sleeves For High-Speed, Multi-Layer Ferrite-Based Interior Permanent-Magnet Motors, Andrew Walters

Theses and Dissertations

This research investigated whether a non-wound carbon fiber reinforced composite (CFRC) sleeve could serve as an effective retention mechanism for a high-speed, multi-layer ferrite-based interior permanent magnet motor. Material characterization testing was conducted on IM7/CYCOM-5320 and IM7/8552, with IM7/8552 selected due to its superior commercial availability. Experimentally obtained properties for both materials fell within acceptable tolerances of published values. Sleeves were manufactured to rotor design specifications (50-mm width, 1.2-mm thickness, 88.6-mm diameter) and tested per ASTM D2290 Procedure A to determine apparent hoop-failure stress. These experimental results validated a finite element model of the D2290 test, confirming realistic strain patterns …

Experimental Investigation Of The Effectiveness Of Various Stitching Methods On Arresting Mode-Ii Interlaminar Damage Propagation In Geometrically-Scaled Stitched Resin-Infused Composites, Allison Jean White

Theses and Dissertations

This thesis presents an experimental and analytical investigation of mode-II interlaminar fracture in geometrically-scaled quasi-isotropic resin-infused composites, with emphasis on through-thickness stitching as reinforcement. A global-local framework integrating load-displacement response, size effect fracture energy analysis, and digital image correlation-based separation measurements enabled direct comparison between unstitched and stitched configurations. Unstitched laminates exhibited pseudo-ductile behavior but significant post-peak load drops (16.7–26.8%) and a small fracture process zone (FPZ) of 0.73 mm, limiting stable crack growth. Stitching preserved pre-peak stiffness while reducing post-peak load drops by 43–95%, increasing effective fracture energy by 39.7% (to 2.413 N/mm), and expanding the FPZ to 2.85 …

Trussworthy - A Lunar Module Truss System, Anthony Wehrli, Sebnem Kalayci, Tyler Williams, Sofia Lopez-Linares Perez, Connor Mcdonagh, Presley Robb

Undergraduate Research and Scholarship Symposium

TrussWorthy is a modular truss-based construction platform designed to support the gradual development of sustainable infrastructure on the lunar surface. Aligned with NASA’s Moon to Mars objectives, the system emphasizes in-situ resource utilization (ISRU) by transforming lunar regolith into structural components through sintering and additive manufacturing. By reducing dependence on Earth-supplied materials, TrussWorthy aims to lower launch costs while enabling scalable, long-term construction capabilities. The design integrates autonomous excavation, 3D printing, and robotic assembly, building on technologies expected from upcoming Artemis and Commercial Lunar Payload Services missions. Engineered to withstand extreme thermal cycling, vacuum conditions, and reduced lunar gravity, the …

Comprehensive Analysis Of Spray Development And Low Temperature Combustion Characteristics In A Cvcc With Nvh Of Renewable Aerospace Fuels: Hefa & Ft Synthetic Kerosene (S8) Compared To Jet-A & Ulsd, Coleman Norton

Honors College Theses

A comprehensive analysis was conducted to research the viability of Hydroprocessed Esters and Fatty Acids (HEFA) and S8 Synthetic Kerosene fuels as a drop-in replacement for conventional petroleum-based fuels, Jet-A and ULSD (Ultra Low Sulfur Diesel). Global transportation remains heavily dependent on liquid fossil fuels, while renewable aerospace fuels offer a promising pathway to reducing life cycle greenhouse gas emissions and pollution. However, the combustion performance and long-term feasibility of these fuels remain insufficiently characterized. This study performed a thorough assessment of each fuel's thermophysical and combustion properties. Thermophysical characterization encompassed viscosity, freezing point, energy density, spray atomization, and volatility. …

Meeting The Moment With Ai-Employer Informed Education, Brent Terwilliger, John Faraca

Publications

As artificial intelligence transforms aviation, aerospace, and autonomy-related sectors, higher education must adapt to meet evolving workforce demands. This session shares emerging findings from a nationwide study led by Embry-Riddle Aeronautical University, focused on employer perceptions of AI adoption, responsible use, and workforce preparedness in domains including uncrewed systems, space systems, robotics, and advanced air mobility. Based on a structured survey and follow-up interviews, the presentation explores how organizations are using AI tools, from generative platforms to enterprise systems, and defining effective and inappropriate use in operational contexts. Participants will gain insight into critical concerns (e.g., data privacy, compliance, security, …

Design Optimization Of Active-Stabilizing Canards For High-Powered Rockets, Simon Babcock

Senior Honors Theses

Rocket canards are a common means of stabilizing a high-powered rocket in flight by producing aerodynamic forces to correct the rocket's trajectory. The size, shape, and position of the canards relative to the rocket body determine their control effectiveness and aerodynamic efficiency – two objectives of canard design with an inverse relationship to each other. By integrating automated iterative rocket trajectory simulation with adaptive surrogate modelling, this research optimized the canard planform geometry for a high-powered rocket to maximize the canards’ control effectiveness and aerodynamic efficiency through multi-variable, multi-objective design optimization. The canard design was first parameterized into four design …

Ballistics Characterization Of Micro-Truss Reinforced Lunar-Inspired Geopolymer Concrete For Space Construction, Phoebe G. Johnson

Honors Theses

This research investigates the ballistics response and compressive strength of a Fly Ash/ Lunar Regolith hybrid geopolymer concrete developed for space construction. The study aimed firstly to optimize the Fly Ash/ Regolith mix ratio for maximum mechanical performance and secondly, to evaluate the effectiveness of carbon-fiber micro-truss reinforcement, produced by 3D printing, in mitigating damage from high-velocity impacts. Concrete specimens with varying Fly Ash-to-Regolith ratios (100-50% Fly Ash) were fabricated and tested under compression and ballistic loading. Compressive strength tests followed ASTM C109 using a 110 Kip 810-MTS testing apparatus on both unreinforced and reinforced 2” cubes. For unreinforced samples, …

Lunar Regolith Sintered Brick Apparatus, Andrew Fasano, Noah Parayil, Darius Felix Karra

Senior Design Project For Engineers

This project describes the preliminary design and analysis of the Semi-Autonomous Lunar Regolith Sintered Brick Apparatus that will assist in developing permanent infrastructure on the Moon. An issue with permanent lunar operations is the transportation of materials to the Moon. To address this, the designed device uses lunar regolith as the source material for producing bricks. This design considers the constraints set for operation with the Griffin lunar lander: maximum payload mass of 200 kg, power consumption below 5 kW, and limited payload dimensions. The design uses a combination of a laser sintering motion system, a regolith layering subsystem, a …