Engineering Commons^™

Orbit Determination With Event-Based Cameras To Improve Space Domain Awareness, Conor M. Wisentaner

Theses and Dissertations

The objective of this research is to assess the utility of a COTS EBC for SDA applications by evaluating its ability to produce data for orbit updates of resident space objects. Unlike traditional frame-based imaging sensors, the pixels on an EBC activate independently when a change in brightness is detected to produce a continuous data flow on a per pixel basis. This unique functionality provides much higher temporal resolution than traditional frame-based sensors, such that an EBC can generate far more data points from a single observation than a frame-based sensor. However, current COTS EBCs have less spatial resolution than …

Additive Manufacturing Of Molybdenum For High Temperature Structural Applications, Megan L. Bustin

Theses and Dissertations

This research considered additive manufactured (AM) molybdenum (Mo) and the effect of three variables on microstructure, mechanical properties, and the relationship between the two. Test temperature, laser speed, and shield gas or build atmosphere were varied, and samples tested and analyzed using a three-point bending test, chemical composition, and optical and scanning electron microscopy. The relationship among variables and results using a Design of Experiments was limited compared to the inclusion of every tested sample. Most effects were expected: samples tested at room temperature were brittle without statistical significance; increasing laser speed resulted in decreased ductility and strain, smaller grain …

A Study Of Pressure Probe Response In Steady And Unsteady Flows, Michael T. Charonnat

Master's Theses

The objective of this thesis is two-fold: to analyze the directional calibration of a 3-hole probe in steady flow and to develop a method for the interpretation of measurements recorded with a novel, fast-response Pitot-type probe in unsteady, turbulent flow. Calibration data for the 3-hole probe’s two side ports was taken in the steady, non-turbulent region of a free jet and was evaluated for symmetry. In addition, data that was recorded using one side port in two independent calibration runs was compared to study repeatability. Misalignment was found between the nominally symmetric data sets, which may be the result of …

Low-Reynolds-Number Locomotion Via Reinforcement Learning, Yuexin Liu

Dissertations

This dissertation summarizes computational results from applying reinforcement learning and deep neural network to the designs of artificial microswimmers in the inertialess regime, where the viscous dissipation in the surrounding fluid environment dominates and the swimmer’s inertia is completely negligible. In particular, works in this dissertation consist of four interrelated studies of the design of microswimmers for different tasks: (1) a one-dimensional microswimmer in free-space that moves towards the target via translation, (2) a one-dimensional microswimmer in a periodic domain that rotates to reach the target, (3) a two-dimensional microswimmer that switches gaits to navigate to the designated targets in …

Effect Of Current Density Ramping On The Anodic Reaction And Morphology Of Aerospace Aluminum Alloys, Peter Totaro Jr.

Dissertations

Aluminum anodizing has been experimented with and studied over the last century because of its ability to form uniform, well ordered cellular coatings on aluminum alloys. Anodizing aerospace alloys has been problematic, due to the alloying elements used to add strength and resistance to stress cracking corrosion. These intermetallic compounds, i.e., copper and zinc, promote oxygen evolution and stress as they accumulate in and on the surface of the forming aluminum oxide. These inclusions lead to increased electrical resistance that forms porous and flawed coating, which can lead to industrial and field failures. The amount of voltage placed on the …

A Deep Learning Approach For Airport Runway Identification From Satellite Imagery, Mahmut Gemici

Theses and Dissertations

The United States lacks a comprehensive national database of private Prior Permission Required (PPR) airports. The primary reason such a database does not exist is that there are no federal regulatory obligations for these facilities to have their information re-evaluated or updated by the Federal Aviation Administration (FAA) or the local state Department of Transportation (DOT) once the data has been entered into the system. The often outdated and incorrect information about landing sites presents a serious risk factor in aviation safety. In this thesis, we present a machine learning approach for detecting airport landing sites from Google Earth satellite …

A Network Flow Approach For Constellation Planning, Skylar A. Cox, Greg N. Droge, John H. Humble, Konnor D. Andrews

Space Dynamics Laboratory Publications

A graph-based network flow approach to constellation planning is presented that respects spacecraft resources and mission constraints to arrive at a preliminary operational schedule. The method discretizes task fulfillment opportunity windows into graph nodes and then adds edges based on feasibility of transition between these opportunities, either by slew maneuvers or extended-time task fulfillment during downlink operations. Intelligent graph pruning is applied to improve computation performance and provide a versatile planning capability with a minimal impact on the resulting solution. A network flow formulation allows for a simultaneous search for spacecraft plans using a Mixed Integer Linear Program (MILP). The …

Rocket Measurements Of Electron Energy Spectra From Earth’S Photoelectron Production Layer, Glyn A. Collinson, Alex Glocer, Dennis Chornay, Robert Mitchell, Rob Pfaff, Tim Cameron, Et. Al.

Publications

Photoelectrons are crucial to atmospheric physics. They heat the atmosphere, strengthen 28 planetary ambipolar electric fields, and enhance the outflow of ions to space. However, 29 there exist only a handful of measurements of their energy spectrum near the peak of 30 photoproduction. We present calibrated energy spectra of pristine photoelectrons at their 31 source by a prototype Dual Electrostatic Analyzer (DESA) instrument flown on July 11 32 2021 aboard the Dynamo-2 sounding rocket (NASA № 36.357). Photopeaks arising from 33 30.4nm He-II spectral line were observed throughout the flight above 120km. DESA also 34 successfully resolved the rarely observed …

Comprehensive Review Of Heat Transfer Correlations Of Supercritical Co2 In Straight Tubes Near The Critical Point: A Historical Perspective, Nicholas C. Lopes, Yang Chao, Vinusha Dasarla, Neil P. Sullivan, Mark Ricklick, Sandra Boetcher

Publications

An exhaustive review was undertaken to assemble all available correlations for supercritical CO2 in straight, round tubes of any orientation with special attention paid to how the wildly varying fluid properties near the critical point are handled. The assemblage of correlations, and subsequent discussion, is presented from a historical perspective, starting from pioneering work on the topic in the 1950s to the modern day. Despite the growing sophistication of sCO2 heat transfer correlations, modern correlations are still only generally applicable over a relatively small range of operating conditions, and there has not been a substantial increase in predictive capabilities. Recently, …

Review On 11 Years Of Implementation Of Strategic Priority Program (Spp) On Space Science And Its Prospect, Ji Wu, Chi Wang, Quanlin Fan

Bulletin of Chinese Academy of Sciences (Chinese Version)

The Strategic Priority Program (SPP) on space science is a series scientific satellites program implemented by Chinese Academy of Science (CAS) since 2011. Since then, it has become the only and systematic space science satellite series of China. The article reviews the major scientific outcomes and technological breakthroughs in its first phase (2011-2016), the ongoing mission developments of its second phase (2017-2024), and the selected mission proposals for future space science program up to 2030. In 2016, President Xi has addressed:"to promote full developments of space science, space technology and space application," where he put space science in the first …

Thoughts On Space Science Development, Yidong Gu

Bulletin of Chinese Academy of Sciences (Chinese Version)

Space science is a large-scale activity by using space vehicles to explore the universe and natural laws and carry out special experiments, which has made great contributions to the development of contemporary science. This paper outlines the major breakthroughs in international space science, analyzes the context and new trends of space science and manned exploration activities, reviews the development achievements of space science in China in the past 20 years, puts forward existing problems and gaps, and emphasizes the strategic position of space science and its importance to China's science and technology, aerospace and the national long-term development. It is …

Prospects Of Global Space Science Breakthroughs And China’S Contributions, Chi Wang

Bulletin of Chinese Academy of Sciences (Chinese Version)

Space science is a frontier interdisciplinary subject that probes the macroscopic and microscopic worlds with spacecraft as a platform. Since the 1960s, many Nobel Prize-level discoveries and original achievements have been spawned in related basic science, breaking through the boundaries of human cognition of the nature, and expanding the human knowledge graph continuously. In the 21st century, with a new round of scientific and technological revolution brewing, space science has also entered a new era of revolutionary advancements. Here we review the major progress in global space science in the past ten years, as well as the trend of space …

Connecting The Last Mile To Speed Up Space Science Development Of China—Review And Prospect Of The Funding Practices For Space Science By Nsfc, Zengqian Hou, Yupeng Yao, Guoxuan Dong, Sheng Yu

Bulletin of Chinese Academy of Sciences (Chinese Version)

Strengthening the basic scientific research in an all-round way and achieving more breakthroughs from zero to one as soon as possible are the major strategic needs of building a world leading power in science and technology in the new era. As the main channel funding basic research in China, the National Natural Science Foundation of China (NSFC) has always focused on the basic frontiers and major scientific issues in space science, carried out strategic research on the planning of relevant disciplines, sorted out key scientific questions, defined the priority development direction, and provided continuous and stable funding through major, key, …

On Index System Of Space Science Strength And Its Enlightenment, Quanlin Fan, Tingting Song, Peng Shi, Haiyan Wei, Xiaoli Chen, Xuezhao Wang, Shijie Guo

Bulletin of Chinese Academy of Sciences (Chinese Version)

Major achievements of space science and technology are important symbols of a country's scientific and technological level and ability. The basic consensus of the aerospace community is that China's space technology has been well-developed, space applications need to be strengthened, and space science is relatively the less-developed. Thus, it is extremely urgent for China to build a strong country in space science and tackle the "bottleneck". Here we elaborate the internal logic among the strength of S&T, aerospace, and space science, expound the connotation of space science strength, investigate the index system, and suggest the three-tier system scientifically for the …

Collaborative Research: Harnessing Mechanics For The Design Of All-Solid-State Lithium Batteries, Haoran Wang

Funded Research Records

No abstract provided.

Mission Operations, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

Overview

• In review – CONOPS

• Mission Planning

• Anomaly Resolution

• Miscellaneous, but important considerations

• Looking forward

Disk Engine With Circumferential Swirl Radial Combustor, Brian Bohan, Marc Polanka, Bennett Staton

AFIT Patents

A disk engine and system configured to provide high power at a reduced axial length is disclosed herein. The disk engine includes a radial compressor, a compressor discharge manifold positioned circumferentially about compressor, a combustion chamber positioned within the discharge manifold and a radial turbine positioned radially inward of the combustion chamber.

Three-Axis Magnetometer Calibration With Norm Preservation, Seth Lichlyter

Theses and Dissertations

This thesis proposes a set of methods for the purpose of improving the calibration of three-axis magnetometers. Specifically, these methods aim to improve the accuracy of the bias estimation methods currently in use. The first proposed method utilizes a constrained optimization problem based on norm preserving. The second proposed method finds the same bias estimate as the first method, but in a computationally more efficient manner. The last proposed method tackles the case where the value of the local geomagnetic field is only imprecisely known. Computer simulations demonstrate the viability of the proposed methods.

Experiments To Mitigate Flow Recirculation In A Closed Anechoic Chamber Using Mesh Screens As Turbulence Suppressors, Tori Kay Wolverton

Theses and Dissertations

The desire to gather acoustic data of a propeller in simulated hover without environmental effects is met with the challenge of recirculating flow in a closed anechoic chamber. Flow recirculation in an anechoic chamber is not ideal because the effects of it being ingested by the rotor cause unsteady loadings on the propeller. This unsteady loading causes vortex noise from the turbulence introduced by the recirculation of the flow. The aim is to study the acoustic signature of a propeller separate from external factors and engine noise. Two different propellers with three different screen combinations were tested in a closed …

Ground Support Equipment (Gse) Eat, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

About this Presentation

• This presentation was developed as a “taste” of the area of GSE
• There are lots of resources that can be found about GSE and how it should be used
• While I have tried to cover a lot of ground in this presentation, the GSE required for your mission will vary depending on your application
• My intent is to start the thinking process of how to design, develop, and execute GSE elements of your program so that you have a successful mission

Infrared And Fluorescent Thermal Imaging And Thermal Transport Characterization Of Engineering Devices And Systems, Swapnil Suryakant Salvi

Mechanical and Aerospace Engineering Dissertations - Archive

Infrared (IR) thermal imaging is widely used for non-contact temperature measurement in engineering. IR camera detects thermal emissions from the target surface in a certain wavelength range, which, using the known surface emissivity, can be converted to a pixel-by-pixel temperature map. Fluorescence imaging also works along similar lines. This Ph.D. dissertation contributes towards thermal imaging and thermal transport characterization in engineering devices/systems using infrared and fluorescence imaging. In the first two parts of this work, infrared thermal imaging is used for measuring thermal conductivity of thin wires and for spotting unusual activities in a three-dimensional integrated circuit (3D IC). In …

In-Situ Observation Of Extrusion Process In Thermoplastic Material Extrusion Based Additive Manufacturing, Ye Hong

Mechanical and Aerospace Engineering Dissertations - Archive

In thermoplastic material extrusion-based additive manufacturing, solid polymer filaments are fed into extruders to generate extrudates that are needed to build 3D plastic products. There is a finite gap between the inner surface of an extruder and the edge of a filament. This gap facilitates the insertion and translation of the filament inside the extruder. However, it is still not clear how the gap is filled during the extrusion. The lack of this information makes it difficult to model the temperature distribution and flow profile during the extrusion. In this work, we built experimental apparatus to directly observe the gap-filling …

Multi-Objective Aero/Mechanical Design Optimization Of Gp Turbine Blades Platform Contour Using Adjoint Solver And Impact On Secondary Losses, Mostafa Soliman

Mechanical and Aerospace Engineering Dissertations - Archive

Gas Turbines Hot Gas Path components represent the major contribution to generating power in Gas Turbines They are the components that mainly extract power from hot gasses that come out of the combustion Chamber (Combustor). Due to harsh temperature and environment, these components are vulnerable to high thermal and mechanical stresses which affect its durability, life, and efficiency. Hot Gases go through these components can reach very high max temperature. Max blade alloy metal temp in Gas Path blades can reach 1800-1900 F. Because of these severe operation conditions, a very careful prediction of stresses, thermal distribution, losses and flow …

Cold Plate Based Dynamic Liquid Cooling At Data Center And Chip Level, Pardeep Shahi

Mechanical and Aerospace Engineering Dissertations - Archive

The rising demand for high-performance central and graphical processing units has resulted in the need for more efficient thermal management techniques like direct-to-chip liquid cooling. Direct Liquid Cooling using cold plates is one of the most efficient and investigated cooling technology since the 1980s. Major data and cloud providers like IBM, Microsoft, and Google are actively deploying liquid-cooled data center infrastructure due to rising computational demands but its performance and efficiency can be further be enhanced using dynamic cooling technologies. At the chip level since the early ’60s, based on Moore’s law, transistor density has been doubling every generation resulting …

Interactions Of Vortices With Differing Creation Mechanisms In The Wake Of A Normal Flat Plate-Delta Flat Plate Couple: A Numerical Study., Cheruvateth Vivek Nair

Mechanical and Aerospace Engineering Dissertations - Archive

ABSTRACT: Fluid flow is characterized by the presence of various coherent vortical structures such as vortex tubes, vortex streets, and eddies. When these vortical structures interact with each other or other distinct mechanisms in a fluid, they form a chaotic region of mixing where a large transfer of mass and energy is observed; This phenomenon is called a vortex interaction and is commonly observed in nature across large Reynolds number regimes. In engineering, vortex interactions are an important topic of research in areas such as mixing, flow induced vibrations, propulsion, aerodynamics, convection, heat island effects, hydrodynamics, and atmospheric Sciences, to …

Fixed Wing Aircraft Collision Avoidance Using Collision Cone Theory, Andrew T. Iii Beary

Mechanical and Aerospace Engineering Theses - Archive

This thesis develops the guidance and control components of an aircraft collision avoidance system, using a collision cone-based approach. These guidance and control laws are developed by considering the nonlinear relative kinematic equations of the aircraft that are on a collision course, as well as the nonlinear flight dynamics of the aircraft performing the collision avoidance maneuver. The longitudinal and lateral-directional axes of the aircraft are considered separately. The developed guidance and control laws are subsequently integrated with the nonlinear aircraft dynamics in a MATLAB/Simulink framework, and simulations performed to demonstrate the working of the overall system.

Reactive Motion Planning Of Autonomous Vehicles In 3-Dimensional Environments Using Collision And Rendezvous Cones, Kashish Dhal

Mechanical and Aerospace Engineering Dissertations - Archive

This dissertation presents a collision cone/rendezvous cone-based approach for reactive motion planning in three-dimensional dynamic environments. Collision avoidance is fundamental to robot motion planning. In dynamic environments, the path and velocities of obstacles are not known a-priori, and hence it is a common practice to use reactive planners. Reactive planners should be computationally inexpensive because they need to act fast to avoid potential collisions. To reduce the computational load, a majority of motion planning algorithms model the shapes of the robots and obstacles as a circle/sphere. However, when the objects are elongated more in one direction than another, the spherical …

Spacecraft Formation Flying Control Switching Surface Based On Relative Orbital Elements, Tyson K. Smith, John Akagi, Greg Droge

Space Dynamics Laboratory Publications

The development of a switching surface constraint based on the D’Amico relative orbital elements (ROE) is presented in this paper. Relative orbital elements give a more intuitive understanding of how the relative motion of a cluster of satellites changes with time and allows the control algorithm to take advantage of the natural dynamic motion. This work models each vehicle using a model predictive control (MPC) approach, based on the Hill-Clohessey-Whiltshire (HCW) equations, to plan maneuvers which are simulated using a high-fidelity motion model. An ROE based convex polytope switching surface is added to the MPC formulation to force the states …

Scheduling, Complexity, And Solution Methods For Space Robot On-Orbit Servicing, Susan E. Sorenson

Graduate Theses and Dissertations

This research proposes problems, models, and solutions for the scheduling of space robot on-orbit servicing. We present the Multi-Orbit Routing and Scheduling of Refuellable On-Orbit Servicing Space Robots problem which considers on-orbit servicing across multiple orbits with moving tasks and moving refuelling depots. We formulate a mixed integer linear program model to optimize the routing and scheduling of robot servicers to accomplish on-orbit servicing tasks. We develop and demonstrate flexible algorithms for the creation of the model parameters and associated data sets. Our first algorithm creates the network arcs using orbital mechanics. We have also created a novel way to …

Studies Of Multiphase Distribution And Flow In Bubble/ Slurry Bubble Columns With /Without Internals And Advanced Sustainable Construction Materials Using Sophisticated Measurement Techniques, Omar Farid

Doctoral Dissertations

"Bubble/slurry bubble columns have been widely studied and employed as multiphase flow reactors with and without vertical heat-exchanging tubes. In order to understand more deeply the effect of the dense internals on the hydrodynamics of bubble/slurry bubble column, systematic experiments were performed to visualize and quantify using the radioactive particle tracking (RPT) technique. A new methodology for implementing the radioactive particle tracking (RPT) technique has been developed to investigate the effect of the dense internals on the hydrodynamics of the bubble/slurry column reactor. Monte Carlo N-Particle (MCNP) simulation has been implemented to simulate the system to generate a large number …