Engineering Commons^™

Repurposing The United Nations Trusteeship Council To Govern The Establishment Of Outer Space Settlements, Andrew Wulf

Northwestern Journal of International Law & Business

Current existing international law and treaties on outer space do not address or regulate private actors’ property claims or human settlements in outer space. American companies such as SpaceX and Blue Origin, as well as countries like the United States, Russia, and China, are seeking to create colonies on the Moon and Mars. However, there is no international legal authority to allow or regulate this. In order to legitimize and control this impending outgrowth of human settlements, this paper proposes that the U.N. Trusteeship Council be repurposed to govern non-state actors’ claims of outer space property.

First, this paper explains …

A New Trajectory In Uav Safety: Leveraging Reinforcement Learning For Distance Maintenance Under Wind Variations, Xiaolin Xu, Jeffrey Sun

Journal of Aviation/Aerospace Education & Research

In the field of aviation, safety is a critical cornerstone, and the operation of Unmanned Aerial Vehicle (UAV) systems is deeply connected with this principle. A thorough analysis and rigorous simulation and testing of aircraft systems are essential to avoid severe safety hazards. This paper delves into the safety issue in UAV operations, specifically regarding maintaining minimum safety distances under fluctuating wind conditions. The study introduces a novel solution based on a Deep Deterministic Policy Gradient (DDPG) model, a reinforcement learning method. The DDPG model was trained using a simulated environment created through the Gazebo simulator, with values for wind …

A Review Of Dielectric Barrier Discharge Cold Atmospheric Plasma For Surface Sterilization And Decontamination, Kolawole Adesina, Ta Chun Lin, Yue-Wern Huang, Marek Locmelis, Daoru Frank Han

Biological Sciences Faculty Research & Creative Works

Numerous investigations have shown that non-equilibrium discharges at atmospheric pressure, also known as "cold atmospheric plasma" (CAP) are efficient to remove biological contaminants from surfaces of a variety of materials. Recently, CAP has quickly advanced as a technique for microbial cleaning, wound healing, and cancer therapy due to the chemical and biologically active radicals it produces, known collectively as reactive oxygen and nitrogen species (RONS). This article reviews studies pertaining to one of the atmospheric plasma sources known as Dielectric Barrier Discharge (DBD) which has been widely used to treat materials with microbes for sterilization, disinfection, and decontamination purposes. To …

3d Flow Field Quantification In An Artery Model Using Optical Flow Method Based On Simulated Multi-Angle Angiography, Zifeng Yang, Hang Yi, Luke Bramlage, Bryan Ludwig

Mechanical and Materials Engineering Faculty Publications

3D flow field in a numerically simulated arterial model is quantified using the three-dimensional optical flow method based on simulated simultaneous multi-angle X-ray angiography of the blood flow with contrast agent perfusions.

A Pade-Eno Flux Reconstruction For High-Speed Flows, Blake Martin

Browse all Theses and Dissertations

The development of high order numerical schemes has been instrumental in advancing computational fluid dynamics (CFD), particularly for applications requiring high resolution of discontinuities and complex flow phenomena prevalent in high-speed flows. This thesis introduces the Pade-ENO scheme, a high-order method that integrates Essentially Non-Oscillatory (ENO) techniques with compact Pade stencils to achieve superior accuracy, up to 7th order, while maintaining stability in harsh environments. The scheme’s performance is evaluated through benchmark tests, including the advection equation, Burgers’ equation, and the Euler equations. For high Mach number flows, such as the sod shock tube the Pade-ENO method demonstrates its ability …

A Concept Of Producing Aluminum In-Situ On The Moon Through Molten Salt Electrolysis, Jacob N. Ortega, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daniel Stutts, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

This paper presents a concept of producing aluminum in-situ on the lunar surface, namely, the Lunar In-Situ Aluminum Production through Molten Salt Electrolysis (LISAP-MSE) method developed at Missouri University of Science and Technology. This paper aims to demonstrate the use of electro-deoxidation to reduce aluminum oxide (i.e., alumina) into aluminum and oxygen gas via electrolysis in a molten salt bath for the production of aluminum on the Moon. It is shown that with a steady supply of hydrogen chloride, this in-situ resource utilization (ISRU) method could supply several necessary materials consumed in the electro-deoxidation process except hydrogen chloride to produce …

Magnetic Separation Of Lunar Regolith Simulants With Applications To In Situ Resource Utilization On The Moon, Peter Bachle, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Chemical and Biochemical Engineering Faculty Research & Creative Works

The development of in situ resource utilization (ISRU) for metal extraction is imperative as a steppingstone for habitation construction in lunar and non-terrestrial environments. Separation of minerals by chemical composition is important to optimize metal and oxygen liberation from lunar ore. To this effect, devices capable of separating aluminum bearing minerals from iron-bearing minerals from the lunar regolith simulants have been developed. Twenty-eight different simulants have been used in this study. A dual-belt separator was designed to reduce middling. Para-magnetic minerals were reliably separated using a neodymium N52-magnet-separator system. Effective separation of aluminum-bearing minerals from iron-bearing minerals was greater than …

Phenolic Polymer Infiltration And Pyrolysis Process For Additively Manufactured Carbon/Peek Composites To Produce Carbon–Carbon Composites, S. Weiler, H. A. Haffner, K. Chandrashekhara, J. Watts, G. E. Hilmas, J. Bayldon, L. M. Rueschhoff

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Carbon–carbon composites are carbon fibers reinforced with carbon matrix and are classified as advanced materials well suited for high-temperature structural applications. Carbon–carbon composites are characterized by maintaining excellent mechanical properties and structural stability at high temperatures and have been used in aerospace application as nozzles, heatshields, and leading edge. However, conventional methods to manufacture carbon–carbon composites are costly and time-consuming. the aim of this work is to develop a method for creating additively manufactured (AM) carbon–carbon composites using a high-pressure re-infiltration process. in doing so, less infiltration cycles are required compared to a low-pressure re-infiltration, reducing the total manufacture time. …

Modeling Human Strategy For Flattening Wrinkled Cloth Using Neural Networks, Nilay Kant, Ashrut Aryal, Rajiv Ranganathan, Ranjan Mukherjee, Charles Owen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper explores a novel approach to model strategies for flattening wrinkled cloth learning from humans. A human participant study was conducted where the participants were presented with various wrinkle types and tasked with flattening the cloth using the fewest actions possible. A camera and Aruco marker were used to capture images of the cloth and finger movements, respectively. The human strategies for flattening the cloth were modeled using a supervised regression neural network, where the cloth images served as input and the human actions as output. Before training the neural network, a series of image processing techniques were applied, …

New Testing Capabilities Of The Missouri University Of Science And Technology Supersonic Wind Tunnel, Joshua Gary, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The development of non-intrusive, laser-based diagnostic techniques has significantly enhanced supersonic experimental aerodynamics, enabling the measurement of many parameters in complex flow fields. Among these techniques, Tomographic Particle Image Velocimetry, capable of measuring 3 components of velocity in 3-dimensional volumes, is now available at the Aerodynamics Research Laboratory of the Missouri University of Science and Technology. To integrate this new system into the university's supersonic wind tunnel, a redesigned nozzle, test section, and diffuser have been implemented. The upgraded modular test section features 4 large ports which can be configured with windows for optical diagnostics or lead plates for model …

Sensor Tasking For Low Earth Orbit Objects: Leveraging Space Sensor Data For Ground-Based Optical Observations, Smriti Nandan Paul, Hang Woon Lee

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Because of recent advancements in space technologies, easier and more economical access to space, and an increase in commercial interests, the near-Earth space environment has witnessed an exploding number of objects being put into orbit. In particular, the low Earth orbit (LEO) region is at an increased risk of orbital collisions from large satellite constellation projects. Thus, monitoring LEO objects for space situational awareness and space traffic management has become increasingly imperative. In this paper, we use the concept of limited-CDF (cumulative distribution function) surface and mutual information for designing sensor tasking algorithms focusing on regular observation of known catalog …

Sensor Tasking Strategies For Space-Based Observers In The Cislunar Environment, Smriti Nandan Paul, Roshan Thomas Eapen, Puneet Singla

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The cislunar space environment has witnessed an increase in activities, and future projections indicate significant growth in object population. Consequently, it becomes crucial to monitor these objects for space domain awareness (SDA) purposes. As the number of objects surpasses the available observers, meticulous sensor tasking becomes essential. This paper focuses on designing and exploring strategies for observing and keeping custody of known objects in cislunar space. Optical space-based telescopes, combined with lunar ground-based telescope, are employed for sensor tasking of cislunar objects residing in valuable orbits. The proposed research aims to address the following key points: (1) examination of the …

Damage Initiation Of 15v38 Steel Bar During Square-To-Round Hot Rolling Process, Siva Sai Krishna Dasari, Henry Adekola Haffner, K. Chandrashekhara, Mario F. Buchley, Simon N. Lekakh, Ronald J. O'Malley

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Hot rolling processes have been extensively used to produce round bars by reducing the cross-sectional area of continuously cast steel. The current trend toward increasing productivity often requires a more aggressive reduction per pass. Establishing safe and optimized hot rolling parameters must be determined to avoid damage while deforming the specific steel composition. Understanding the damage mechanism during the metal forming process is vital for product quality. Herein, a combined experimental and simulation approach is developed to track the evolution potential damage during hot bar rolling. Hot tension tests are conducted on as-cast vanadium micro alloyed 15V38 steel at different …

L∞ Bounds For Transient Growth In Repetitive And Iterative Learning Control Systems, Douglas A. Bristow, John R. Singler

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper revisits the problem of large transient growth in Iterative Learning Control (ILC) and Repetitive Process Control (RPC) systems. In ILC and RPC problems a process is repeated iteratively, with new control calculations occurring in between each iteration. Large transient growth refers to the propensity of some control algorithms to grow error exponentially before eventually converging. While robust monotonic convergence algorithms (in which monotonic convergence is guaranteed usually in exchange for a small loss in performance) have largely eliminated the concern for large transient growth in ILC, similar results cannot always be obtained in RPC. The emergence of additive …

Electrostatic Sorting Of Lunar Regolith Simulants For Sustainable Resource Utilization: Modeling And Characterization Of Particle Size Distribution, Abdullah Al Moinee, Peter Bachle, Kyle Newport, William Schonberg, David Bayless, Jeffrey Smith, Daoru Han, Fateme Rezaei

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In pursuit of sustainable resource utilization on the Moon, this paper delves into modeling and characterization of particle size distribution (PSD) of lunar regolith simulants in an electrostatic system. A prototype electrostatic sieve was built and tested with four sample simulants mirroring properties of lunar mare and highland regolith. An alternating four-phase (90 degrees, 180 degrees, 270 degrees, 360 degrees) traveling square-wave was utilized for particle-directed transport to model the diverse trajectories of the particles. Numerically, we scrutinized how the distribution functions of the particles are manifested as the electrostatic field propagates, with a focus on three distinct particle ranges …

Fundamental Chemical Kinetic Experiments Of Combustion Products Inside A Shock Tube, Alex-Abraham Pothen

Graduate Thesis and Dissertation 2023-2024

The use of lateral divert thrusters on hypersonic vehicles would allow for fine-tuned attitude control at high Mach numbers. However, the jet interaction effects of lateral thrusters on the hypersonic flow field have not been investigated thoroughly. Computational Fluid Dynamics (CFD) can provide preliminary modeling of the jet interaction, but several variables such as vehicle geometry, velocity, and altitude, result in computationally expensive modeling or loss in accuracy of the results. Therefore, the goal of chemical kinetics testing and chemical model verification is to enhance the fidelity of the jet interaction effects, specifically the plume reaction with air and the …

Modelling Of The Viscoelastic Relaxation Of A Stowed Telescope Starshade, Rahul Raghu

Graduate Thesis and Dissertation 2023-2024

The Habitable Worlds Telescope Starshade is an occulting disk that orbits in tandem with a telescope that occludes and diffuses the light from stars to observe the relatively dim exoplanets in orbit around them. It achieves this in part with tailored petals that diffuse light to soften the light from the star. Due to the relative sizes of the star and the planet, NASA considers the shape stability of the Starshade's petals to be a Key Technology Gap. The Starshade is developed to be a deployable composite structure that folds on itself to fit within modern rockets. Due to the …

Mechanics Of Pure Bending And Eccentric Buckling In High-Strain Composite Structures, Jimesh D. Bhagatji, Oleksandr G. Kravchenko, Sharanabasaweshwara Asundi

Mechanical & Aerospace Engineering Faculty Publications

To maximize the capabilities of nano- and micro-class satellites, which are limited by their size, weight, and power, advancements in deployable mechanisms with a high deployable surface area to packaging volume ratio are necessary. Without progress in understanding the mechanics of high-strain materials and structures, the development of compact deployable mechanisms for this class of satellites would be difficult. This paper presents fabrication, experimental testing, and progressive failure modeling to study the deformation of an ultra-thin composite beam. The research study examines the deformation modes of a post-deployed boom under repetitive pure bending loads using a four-point bending setup and …

The Feasibility Of Motion Tracking Camera System For Magnetic Suspension Wind Tunnel Tests, Hisham M. Shehata, David Cox, Mark Schoenenberger, Colin Britcher, Eli Shellabarger, Timothy Schott, Brendan Mcgovern

Mechanical & Aerospace Engineering Faculty Publications

The Entry Systems Modeling (ESM) Program at NASA has actively participated in the re-development of the Magnetic Suspension Balance System (MSBS) at the six-inch subsonic wind tunnel at NASA Langley Research Center. This initiative aims to enhance the MSBS system's capabilities, enabling the testing of stingless entry vehicle models at supersonic speeds. To achieve this, control algorithms are required to ensure magnetic levitation control and stability for models during free-oscillation dynamic responses. Currently, the system relies on electromagnetic position sensors to provide real-time 3 degrees of freedom control of a rigid body. While this approach has proven successful for subsonic …

Restoration Of Strength In Polyamide Woven Glass Fiber Organosheets By Hot Pressing, Mohammad Nazmus Saquib, Edwing Chaparro-Chavez, Christopher Morris, Kuthan Çelebi, Diego Pedrazzoli, Mingfu Zhang, Sergii G. Kravchenko, Oleksandr G. Kravchenko

Mechanical & Aerospace Engineering Faculty Publications

Thermoplastic composite organosheets (OSs) are increasingly recognized as a viable solution for automotive and aerospace structures, offering a range of benefits including cost-effectiveness through high-rate production, lightweight design, impact resistance, formability, and recyclability. This study examines the impact response, post-impact strength evaluation, and hot-pressing repair effectiveness of woven glass fiber nylon composite OSs across varying impact energy levels. Experimental investigations involved subjecting composite specimens to impact at varying energy levels using a drop-tower test rig, followed by compression-after-impact (CAI) tests. The results underscore the exceptional damage tolerance and improved residual compressive strength of the OSs compared to traditional thermoset composites. …

Enhancement Of The Performance And Emission Attributes For The Diesel Engine Using Diesel-Waste Cooking Oil Biodiesel And Graphene Oxide Nanofluid Blends Through Response Surface Methodology, Medhat Elkelawy Prof. Dr. Eng., E A El Shenawy, Hagar Alm-Eldin Bastawissi, Mahmoud M. Shams

Mansoura Engineering Journal

This study examined how diesel fuel and waste-cooked oil (WCO) biodiesel blends added by various concentrations of graphene oxide (GO) nanoparticles can effect on the performance and emission characteristics of constant-speed, four-stroke, single-cylinder, water-cooled diesel engines. The GO nanoparticles concentrations are 50,100 and 150 ppm dispersed in different diesel-WCO biodiesel blends are pure diesel fuel (B0), 20% WCO biodiesel and 76% diesel fuel (B20), and 40% WCO biodiesel and 56% diesel fuel (B40). In addition 4% toluene in all blends which used as a surfactant. The diesel engine fueled with these blends and operated at various engine loads are 2, …

Kinetic Modeling Of Electrostatic Sieving For Lunar Regolith Beneficiation: Case Studies, Easton Ingram, Emmanuela Amen Eze, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

A new kinetic particle modeling framework was developed to investigate electrostatic transport of lunar regolith particles with applications to the concept of electrostatic sieving. the new approach is based on kinetic particle dynamics and includes major modules of sampling the particle size distribution, solving electric fields, and tracking motion of charged dust grains. Case studies for a concept of electrostatic sieving were chosen to validate the new model. the simulation achieved similar yields reported in previous works, which served as validation of the model. the new model is computationally efficient and could serve as a design, analysis, and optimization tool.

Progress Of Lisap-Mse: A Concept Of Producing Aluminum In-Situ On The Moon Through Molten Salt Electrolysis, Jacob N. Ortega, David Bayless, Daniel Stutts, Daoru Han, Todd P. Sander, Jeffrey Smith, Fateme Rezaei, William Schonberg

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper presents a concept of producing aluminum in-situ on the lunar surface, namely, the Lunar In-Situ Aluminum Production through Molten Salt Electrolysis (LISAP-MSE) method developed at Missouri University of Science and Technology. This paper aims to demonstrate the use of electro-deoxidation to reduce aluminum oxide (i.e., alumina) into aluminum and oxygen gas via electrolysis in a molten salt bath for the production of aluminum on the Moon. It is shown that with a steady supply of hydrogen chloride, this in-situ resource utilization (ISRU) method could supply several necessary materials consumed in the electro-deoxidation process except hydrogen chloride to produce …

Optimization Of High-Bypass Turbofan High-Pressure Compressor Blade – A Case Study, Adeel Khalid, Vlad Mandzyuk

The Kennesaw Journal of Undergraduate Research

This research determines the relationship between the High-Pressure Compressor (HPC) rotor blade design variables and compressor pressure ratio of a high bypass turbofan engine. Alterations in the HPC blades span, chord, taper, twist, number, and angle of incidence are performed and their effect on the HPC pressure ratio is observed. The objective is to determine key parameters that could maximize the performance of a high-pressure compressor for a given mission. Physics-based modeling, Computational Fluid Dynamics (CFD), and wind-tunnel testing are performed to compare and validate findings. Physics-based modeling is performed to serve as the benchmark for data obtained through other …

Winglet Vortex Optimization, Adeel Khalid, Anthony Gutierrez

The Kennesaw Journal of Undergraduate Research

The objective of this research is to determine the effect on aerodynamic performance due to changes of winglet design variables of the Boeing 737-700 aircraft. The various winglet types studied in this research include the blended, canted, wingtip fence and split scimitar. The variables include height, sweep angle, taper ratio, and inclination angle. These variables are altered in 5% increments from -15% to +15% of their original baseline values. Each altered winglet design only changes one variable at a time while keeping all other variables constant. The altered models are compared to the original by finding the aerodynamic efficiency through …

Development Of A High-Pressure Infiltration Process For Phenol–Formaldehyde Matrix Composites, Samuel Weiler, Patrick Schwartzkopf, Henry Haffner, K. Chandrashekhara

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Phenol–formaldehyde (phenolic) thermosets are known for excellent heat and chemical resistance, high flame retardance, and good mechanical performance. However, phenolics are also known for their high brittleness, and tendency to form voids, due to a condensation reaction forming water during curing. These voids can decrease the mechanical performance of the resultant phenolic composite and introduce undesirable performance characteristics. This work aims to develop a technique that uses high-pressure infiltration to obtain dense phenolic matrix composites, with commercially available resin and fiber reinforcement. The high-pressure system developed in this work is compared to a conventional low-pressure resin infusion technique, and the …

Kinetic Simulations Of Dust Grain Charging Near Surfaces Under Various Plasma Conditions, David Lund, Daoru Han

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper presents fully kinetic numerical investigations of the charging of spherical and irregular shaped dust grains in multiple configurations utilizing the Parallel Immersed-Finite-Element Particle-in-Cell Dusty (PIFE-PIC-D) framework. The simulations account for both surface charging and in-depth charging of the dust grains immersed in various ambient plasma conditions near a floating or biased surface. PIFE-PIC-D explicitly resolves the geometrical and material properties (permittivity and photoelectron emissions) of each individual dust grain. PIFE-PIC-D will model self-consistently the unsteady and stochastic charging of grains directly from the deposition of electrons and ions onto them. PIFE-PIC-D will also simulate the charging of irregular-shaped …

Development And Characterization Of An Ion Source To Simulate Low Earth Orbit Plasma Environment In A Vacuum Chamber, Emmanuel Kofi Asuako Wie-Addo, Scott Lucas, Daoru Han

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A magnetic filter-type plasma source has been installed and characterized in a 10 ft long x 6ft diameter vacuum chamber. The plasma source was characterized with a fleet of diagnostic probes including an in-house cylindrical Langmuir probe. This resulted in the measurement of key plasma parameters such as electron number density, electron temperature, plasma potential, Debye length, ion current density, streaming ion energy, ion number density, and streaming ion velocity. By varying the flow rates, discharge current, and distance, single points measurements were taken at three locations downstream of the plasma source to establish an optimum operating condition to simulate …

Investigating Bistable Dynamics Of Coupled Oscillators With Similarities To Neural Activity In Epilepsy, Nilay Kant, Ranjan Mukherjee

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The dynamics of an oscillator, which exhibits a stable equilibrium and a stable limit cycle, is investigated. We refer to it as a bistable oscillator unit (BOU) and show that two coupled BOUs (CBOUs) exhibit dynamics analogous to neural activity patterns in epilepsy, including healthy, localized, and fully spread epileptic states. By treating each CBOU as an independent system influenced by the state of the other, we establish local input-to-state stability near the equilibrium and the limit cycle and estimate the ultimate bounds of the trajectories. Our analysis identifies the domain of the initial conditions and estimates the coupling parameter …

Aerothermodynamic Analysis Of A Linear Aerospike Fueled With Liquid Methane Using Cfd, Aidan Rowell

Honors College Theses

Renewed interest in manned spaceflight, mostly spurred by the advancement of commercial spacecraft, has led to growing interest in improving the efficiency of rocket engines. Aerospike nozzles have the potential to provide this boost in efficiency to spacecraft and thus lower costs and increase payload capacity. This type of nozzle is what is known as altitude adjusting and can significantly increase efficiency. When paired with propellants such as methane/oxygen, which can be manufactured in-situ on some planetary bodies and has a higher density than traditional propellants like liquid hydrogen/liquid oxygen, even more efficiency gain can be achieved. To understand the …