Engineering Science and Materials Commons^™

Optimization Of Tps Films Using An Adaptive Design Of Experiments Approach In A Bayesian Optimization Framework, Theresa Marks, Gracie White, Scott Lohman, Mayank Malhotra

The Journal of Purdue Undergraduate Research

Plastic pollution, amounting to 12 million tons annually, necessitates sustainable alternatives to single-use plastics. Compostable thermoplastic starch (TPS) films show promise but lack strength and durability compared to traditional plastics. This study employs an adaptive design of experiments (DoE) approach to enhance TPS films by optimizing testing points. The research focuses on varying concentrations of plasticizers (acetic acid and glycerol) in a water and potato starch mixture, aiming to identify the optimal ratio maximizing tensile strength and % elongation at break. Gaussian process regression (GPR) with uncertainty estimation and Bayesian optimization (BO) utilizing an acquisition function (AF) are employed. The …

Mae Enewsbrief July-Sept 2024, Department Of Mechanical And Aerospce Engineering, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Greek Key-Inspired Fractal Metamaterials With Enhanced Flexibility And Energy Absorption., Zhennan Zhang

Electronic Theses and Dissertations

Architected materials with intricate three-dimensional (3D) geometries offer unique properties and functionalities but face challenges in manufacturing costs and complexity. This research explores the integration of simple 2D Greek Key-inspired lattices into fractal designs to achieve exceptional mechanical performance. Using 3D printing and kerfing, these fractal structures demonstrate enhanced flexibility and energy absorption capabilities. Through three-point bending and in-plane tensile tests, the 2D fractal lattices exhibited a 600-fold reduction in bending force and a tensile stretch capacity of up to 520%, significantly outperforming brittle parent materials. Out-of-plane compression tests revealed a five-fold increase in energy absorption compared to honeycomb structures, …

Intrinsic, Doped And Alloyed Gallium Oxide Films For Optoelectronics, Francelia Sanchez Escobar

Open Access Theses & Dissertations

Due to the impressive advancement of present technology and increasing energy consumption, there is increasing demand for energy-efficient multifunctional devices based on low-cost, eco-friendly material systems. Gallium oxide (Ga2O3) is an emerging semiconductor with potential for the next generation of power electronics and optoelectronic devices due to its ultra-wide bandgap of 4.8 eV and high theoretical breakdown voltage of 8 MV/cm among other intrinsic properties. Some of the possible applications of β-Ga2O3 include ultra-violet (UV) solar blind photodetectors, field effect transistors, solar cells, and chemical sensors. However, to utilize its full potential, understanding the mechanistic aspects of thin film growth …

Enhanced Redox Storage And Diverse Intercalation In Layered Metal Organic Frameworks With A Staggered Stacking Mode, Satya Prakash Suman

Open Access Theses & Dissertations

Two-dimensional metal organic frameworks (2D MOFs) with honeycomb-like porous sheets are of growing interest for applications in electrochemical energy storage and electrocatalysis. Notably, 2D MOFs that host their porous sheets in eclipsed or slipped-parallel stacking modes possess continuous one-dimensional pores (1D) and have been widely studied. In contrast, related 2D MOFs with a staggered stacking mode have reduced porosity, are relatively rare, and are largely unexplored for applications. Here we report 2-fold enhanced redox storage and intercalation of diverse ions in a staggered-stacked, nonporous 2D MOF over its eclipsed-stacked, porous counterpart. Interestingly, both MOFs, despite undergoing similar ligand-centered redox processes, …

Development Of Uranium Fluoride Microstructures, Harry Jang

UNLV Theses, Dissertations, Professional Papers, and Capstones

Uranium microstructured materials with controlled size and shape have found applications in several branches of the nuclear industry including as targets for medical isotopes production, fuels for nuclear reactors, standards for analytical measurements, and energy sources for space exploration. Morphological studies of actinide materials are also highly relevant to nuclear forensics-related work. Other potential applications include information storage, catalysis, sensors, and luminescent devices. Most studies on uranium microstructured materials have focused on binary oxides, nitrides, carbides, and fluorides, with the spherical shape being the dominant morphology. Prior to the work reported in this dissertation, aside from UF4 microspheres (ms) and …

Assessing Khumbu Region Glaciers Mass Balance Change Using Geospatial Techniques From 2012 To 2024, Yashvi Jagatbhai Shah

Electronic Theses, Projects, and Dissertations

The glaciers in the Hindu Kush Himalaya are critical for sustaining the water supply of South Asia's major rivers, upon which over 230 million people, both in the mountainous regions and lowland areas, depend. Climate change is driving rapid glaciers melt near the summit of Mount Everest, located at an elevation of approximately 7,906 meters (25,938 feet). This has resulted in glacier thinning occurring up to 80 times faster than the original ice formation. However, due to their disposition in a complex topographic setting and inaccessible terrain, continuous glacier observations pose significant challenges.

This study evaluated the mass balance of …

Influence Of Hygrothermal Conditions Of The Bistability Of Asymmetric Carbon Fiber Laminate Composites, Celia Hill

All Theses

Carbon fiber-reinforced polymer (CFRP) laminates have widespread use in many industries because of their exceptional strength-to-weight ratio. Carbon fiber laminates following an asymmetric layup orientation can exhibit bistability meaning the laminate can exist at two stable geometric configurations. The morphing characteristics of bistable CRFP has a growing level of interest because of its potential in various applications including space aircraft structures for easy repair, automotive structures for energy dissipation and ergonomics, robotics for flexible motion and energy harvesting. Existing research shows that both moisture and temperature affect the material properties and behavior of CFRP laminates, however, the influence of moisture …

Striking A Balance: Market Shock & Responses In Automotive Components Manufacturing, Emma Lane Mcgahey

All Theses

This thesis examines the effects of extreme market shocks on supply chain dynamics within the automotive industry. Through an analysis of demand data from an automotive manufacturer to its component suppliers (January 2018 to May 2024), the study investigates the relationship between market shocks and supply chain responses, providing insights into how auto components inventory management handles downstream responses to market shocks. With supporting public data—from FRED, BLS, and the U.S. Census Bureau resources—we explore two primary relationships: the impact of market shocks on the Average Standard Deviation of Demand (SDO) and the effect of demand variability on expedited pricing …

Elucidating The Effect Of Milled Glass And Graphite Fiber On The Quasi-Static Properties Of Vinyl Ester Resin Composites, Sarahi Mendivil

Open Access Theses & Dissertations

Composite materials can be tailored to various applications, making them one of the most conventional materials. Their ability to enhance desired characteristics enables higher strength while maintaining light weight. However, understanding defects and manufacturing limitations is crucial for optimizing their fabrication processes. This paper focuses on the manufacturing processes of open molding with controlled variations to establish an optimal technique aimed at minimizing defects, such as bubble formation where the focus is on mitigating defects and ensuring uniform dispersion of fiber in fiber-reinforced composites. After refining the manufacturing process, composites with varying resin-to-fiber concentration ratios were manufactured using glass and …

Ultra-High Temperature Ceramics: Materials, Manufacturing, And Machine Development, Joseph Matthew Munoz

Open Access Theses & Dissertations

This research aimed to advance the 3D printing of ultra-high-temperature ceramic matrix composites (UHTCMCs) and develop a custom Direct Ink Writing (DIW) system with multimaterial and in-line mixing capabilities. The study first focused on creating ZrB₂–SiC composites reinforced with aligned silicon carbide fibers (SiCf) using paste extrusion. By formulating suspensions with a preceramic polymer (SMP-10), ZrB₂, and SiCf, the study assessed how fiber alignment influenced key properties such as thermal and electrical conductivity and mechanical strength. Green curing and pyrolysis transformed the printed parts into UHTCMCs, with results showing substantial improvements in thermal conductivity—nearly double that of non-aligned parts—and a …

Density-Driven Investigations Of Ruthenium Binary Compounds Rux2 (X = O, S, N), Melanie White

UNLV Theses, Dissertations, Professional Papers, and Capstones

Exploration and fine-tuning of the energy landscape of materials can be accessed by means of changes in material density, a key principle of high pressure research. Density-driven changes impact variations in oxidation states and coordination numbers for the element constituents of a compound. Pressure-induced modification of intrinsic density can promote the formation of new materials, variations in physical properties, and transformations in crystallographic symmetry. With this as our foundation, we focus on ruthenium binary compounds - altering the anion species to change electronegativity while probing pressure and temperature effects. This led us to the present study of ruthenium oxide RuO2, …

Thermal Conductivity Characterization Of High Oleic Vegetable Oils Based Hybrid Nanofluids Formulated Using Gnp, Tio2, Mos2, Al2o3 Nanoparticles For Mql Machining, Anthony Chukwujekwu Okafor, Tobechukwu Kingsley Abor, Saidanvar Esanjonovich Valiev, Ignatius Echezona Ekengwu, Abiodun Saka, Monday Uchenna Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper presents the results of thermal conductivity characterization of six high oleic soybean oil (HOSO) and four high oleic canola oil (HOCO)-based hybrid nanofluids formulated with four types of nanoparticles (Graphene nanoplatelet (xGnP), TiO2, MoS2, and Al2O3) at nanoparticles wt.% concentration from 1 % to 7 % in 1 % increment using the two-step method for use in MQL machining of difficult-to-cut metals. Thermal conductivity of the formulated hybrid nanofluids were measured using Thermtest Transient Hot Wire Liquid Thermal Conductivity Meter at temperatures from 25 °C to 75 °C in increment of 10 °C. Obtained results showed that thermal …

Removal Capabilities Of Zeolite And Zero Valent Iron With High-Level Waste Tank Radionuclides And Metals: Cesium, Strontium And Chromium, Colette R. Towles

UNLV Theses, Dissertations, Professional Papers, and Capstones

High level nuclear waste (HLW) has been disposed for temporary storage in underground steel tanks at the Department of Energy Nuclear sites. For example, at the Hanford Site, WA, and Savannah River Site (SRS), SC, HLW account for eighty-eight million gallons (Mgal) and 450 million Curies (MCi) of radioactivity. In the early nuclear activity at Hanford, the waste was discharged to single-shell steel tanks, and the lack of secondary containment allowed leaks, contaminating soil and groundwater. Despite tremendous efforts to stabilize the liquid waste at nuclear sites, treatment is complex, costly, and time-consuming; therefore, HLW may have to be stored …

Analysis Of Tidal Energy Potential In The Merauke Papua River Waters Indonesia, Peter Sahupala, Daniel Parenden

Journal of Mechanical Engineering Science and Technology (JMEST)

The purpose of this study is as a source of information to study the potential of tidal energy at the estuary of the Maro River in the waters of Merauke Regency. This study uses a quantitative method, while the method for determining the location of the study used is the purposive sampling method where the data collection point is right at the end of the estuary of the Maro River because it faces directly onto the Arafura Sea. Tide data for 5 months, namely September 1, 2023 to January 31, 2024 with a pool area of 1,260,000 m2, with the …

Innovations In Additive Manufacturing For Socket Fabrication: An Overview, Linda Ziyadatul Faiza, Wahyu Caesarendra, Wahyu Dwi Lestari

Journal of Mechanical Engineering Science and Technology (JMEST)

Additive Manufacturing (AM) has transformed the prosthetics industry, particularly in socket production, which plays a critical role in the comfort, fit, and functionality of prosthetic limbs. This article examines the latest advancements in AM technologies and their applications in socket fabrication. Key techniques like stereolithography (SLA), selective laser sintering (SLS), and fused deposition modeling (FDM) have facilitated the production of highly personalized, lightweight, and durable prosthetic sockets. These methods not only improve design precision but also allow for the use of biocompatible, flexible materials, enhancing both comfort and functionality. Digital design tools have streamlined the production process, reducing lead times …

The Potential Of Ramie Fiber As Reinforcement In Calcium Carbonate-Filled Polyester Resin Matrix Composites For Roofing Applications, Reinaldo Reinaldo, Djoko Setyanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Polymer matrix composite roofing materials available in the Indonesian market typically consist of 30%wt chopped strand mat glass fiber embedded in unsaturated polyester resin, filled with 30 parts per hundred resin (PHR) calcium carbonate. The aim of this research is to evaluate whether natural ramie fibers can potentially replace glass fibers. In the first stage of the study, we compared three types of natural fibers abundant in Indonesia: banana stem fibers, sugarcane bagasse, and ramie. Showed that ramie fiber performed the best. Its flexural strength, flexural modulus, and impact toughness were the highest, measured at 191.57 MPa, 6691 MPa, and …

Tactical Activities To Improve The Effectiveness Of Concrete Batching Plant Based On Overall Equipment Effectiveness Analysis, Yurida Ekawati, Iddo Christian Sutrisno, Teguh Oktiarso

Journal of Mechanical Engineering Science and Technology (JMEST)

The growth of infrastructure projects has led to an increased demand for ready-mix concrete. A company that produces ready-mix concrete using a batching plant encountered difficulties in fulfilling customer orders due to the high rate of machine downtime. Overall equipment effectiveness (OEE) was employed to examine these issues at the tactical activities, where the root causes of losses that occur in the OEE components of availability, performance, and quality were addressed. The OEE analysis was extended to encompass maintenance effectiveness measures, as the anticipated solution to the problem was not the replacement of the machine, but rather an enhancement of …

Structural Simulation Of Wheelchair Ramp Using Finite Element Method, Bhre Wangsa Lenggana, Agung Nugroho, Ubaidillah Ubaidillah

Journal of Mechanical Engineering Science and Technology (JMEST)

Wheelchairs are essential mobility aids for people with disabilities, but they are often limited to flat surfaces and cannot overcome height differences. Portable ramps are an effective solution to overcome this limitation. This research aims to simulate and analyze the structure of a portable ramp for wheelchairs. Simulations were conducted using finite element method analysis software to assess the portable ramp's von Mises stress, deformation, and safety factor in various loading positions. Finite element method (FEM) analysis software was utilized to evaluate key mechanical properties, including von Mises stress, deformation, and safety factor, under different loading conditions and positions. The …

Analysis Of Biomass Briquette Mixed Bagasse And Sugarcane Peel On The Performance Of Forced Top-Lit Updraft Gasifier Stove, Intan Hardiatama, Aron Enruico, Yuni Hermawan, Muhammad Trifiananto, Skriptyan N.H. Syuhri

Journal of Mechanical Engineering Science and Technology (JMEST)

The population growth in Indonesia from 270 million in 2020 to 279 million in 2024 has increased LPG consumption, potentially leading to future fuel shortages. The top-lit updraft (TLUD) gasifier stove using renewable biomass materials, offers a sustainable alternative. Biomass such as bagasse and sugarcane peel can be optimized into charcoal briquettes with high calorific value and low emissions. The calorific value of briquettes can be further enhanced by blending other high–calorific biomass materials. This experimental research focuses on testing the calorific value of raw bagasse and sugarcane peel before carbonization, as well as briquette mixtures (70:30, 50:50, 30:70) using …