Automation Of Non-Destructive Testing Techiniques Used For Finding Defects,
2010
Clemson University
Automation Of Non-Destructive Testing Techiniques Used For Finding Defects, Bhanu Singh
All Theses
This master thesis focuses on the automation and fusion of non-destructive testing methods. The research includes the fusion of non-destructive testing methods done with infrared micro-bolometer and ultrasonic transducers. A control system which utilized mechanical, electrical, electronic systems and computer aided technologies was developed. Conveyor belt system, PLC (programmable logic controller), XYZ mechanism and different sensors were utilized to automate the process of capturing images and a communication link was set up between thermal camera and system that controls the ultrasonic testing apparatus, to integrate the two techniques. The test results from the thermal camera were utilized in ultrasonic testing. …
Modeling And Optimization Of A Plug-In Hybrid Electric Vehicle,
2010
Clemson University
Modeling And Optimization Of A Plug-In Hybrid Electric Vehicle, Venkat Vijay Kishore Turlapati
All Theses
Today, the world is faced with a situation where new technologies have to be developed to decrease the dependence on natural non-renewable resources. Each day, as the demand for non-renewable resources increases, it puts great pressure on the scientific fraternity to develop new technologies that are aimed at reducing this dependence.
Today's road traffic plays a major part in the energy consumption worldwide. Hence it is imperative that we develop environmentally friendly solutions to this problem that arises in the transportation sector. Hybrid vehicle is one of the alternatives that can be seen as a viable solution to this energy …
Induction Assisted Thermography For Inspection Of Micro Defects On Sheet Metals,
2010
Clemson University
Induction Assisted Thermography For Inspection Of Micro Defects On Sheet Metals, Sree Pamidi
All Theses
The work focuses on Induction assisted Thermography as a non-contact and non-destructive method of Inspecting micro defects on sheet metals used for making automotive body panels. Induction heating as a source of excitation to elevate the temperatures of sheet metals for uniform heating and detect ability of the defect is the main objective of the study.
Experiments are done on sheet metal samples with defects using excitation techniques like Pulse and Electromagnetic Induction. The thermal images obtained from the infrared camera are used to quantitatively analyze the detect ability of defects on sheet metals. The limitations of using Pulse technique …
Design Method Development For The Design Of Traction Systems,
2010
Clemson University
Design Method Development For The Design Of Traction Systems, Avinash Kolla
All Theses
The objective of this research is to develop a design method for rapid exploration of traction concepts primarily for off-road vehicles. Different approaches available to achieve this objective are discussed and compared, such as computational, analytical, and physical methods. Computational approaches are based on simulations performed using Finite Element Method (FEM), Discrete Element Method (DEM), and combined Finite Element-Discrete Element (FE-DE) methods. Analytical approaches are based on closed form mathematical models developed by previous researchers based on the theory of plasticity. Physical approaches include fabrication and testing of prototypes at different levels of abstraction. This thesis compares these different approaches …
Determination Of Higher Order Coefficients For A Crack Parallel To An Interface,
2010
Clemson University
Determination Of Higher Order Coefficients For A Crack Parallel To An Interface, Venkata Lakshman Kolluru
All Theses
A general method based on the singular integral equations is developed to
computationally determine the higher order coefficients in mixed mode fracture
mechanics. These 'k' and 'T' coefficients are defined with respect to a polar coordinate
system centered at a crack tip, and give asymptotic expressions for stresses and
displacements according to the William's eigenfunction expansions,
(r, ) (2r) k f (n, ) k f (n, ) IIk
ij
II
n
Ik
ij
I
n
n 0
2
1
n
ij
1
(0, ) (2 ) ( , ) ( , …
Elements Of Study On Dynamic Materials,
2010
Universite Pierre et Marie Curie
Elements Of Study On Dynamic Materials, Marine Rousseau, Gerard A. Maugin, Mihhail Berezovski
Publications
As a preliminary study to more complex situations of interest in small-scale technology, this paper envisages the elementary propagation properties of elastic waves in one-spatial dimension when some of the properties (mass density, elasticity) may vary suddenly in space or in time, the second case being of course more original. Combination of the two may be of even greater interest. Toward this goal, a critical examination of what happens to solutions at the crossing of pure space-like and time-like material discontinuities is given together with simple solutions for smooth transitions and numerical simulations in the discontinuous case. The effects on …
An Experimental Investigation Of Friction Bit Joining In Az31 Magnesium And Advanced High-Strength Automotive Sheet Steel,
2010
Brigham Young University - Provo
An Experimental Investigation Of Friction Bit Joining In Az31 Magnesium And Advanced High-Strength Automotive Sheet Steel, Rebecca Gardner
Theses and Dissertations
Friction Bit Joining (FBJ) is a recently developed spot joining technology capable of joining dissimilar metals. A consumable bit cuts through the upper layer of metal to be joined, then friction welds to the lower layer. The bit then snaps off, leaving a flange. This research focuses on FBJ using DP980 or DP590 steel as the lower layer, AZ31 magnesium alloy as the top layer, and 4140 or 4130 steel as the bit material. In order to determine optimal settings for the magnesium/steel joints, experimentation was performed using a purpose-built computer controlled welding machine, varying factors such as rotational speeds, …
Simulation Of Temperature Distributions In Tissue Upon Laser Pulse Irradiation Including Water Mass Transfer,
2010
Old Dominion University
Simulation Of Temperature Distributions In Tissue Upon Laser Pulse Irradiation Including Water Mass Transfer, Deepthi Nagulapally
Electrical & Computer Engineering Theses & Dissertations
Lasers, due to their unique characteristics, have tremendous applications in the medical field. Generally all laser applications in hie-medicine involve the propagation of laser energy through tissue. Energy is deposited giving rise to many physical, hie-chemical, and mechanical effects. Among these are dynamical changes in the local temperature distributions within the tissue. Analysis of the temperature changes requires the creation of an appropriate optical transmission and heat flow model that incorporates user specified laser parameters. Here, a numerical simulation model was developed to study both steady state and time dependent temperature distributions due to pulsed laser radiation within user specified …
Natural Fibers And Fiberglass: A Technical And Economic Comparison,
2010
Brigham Young University - Provo
Natural Fibers And Fiberglass: A Technical And Economic Comparison, Justin Andrew Zsiros
Theses and Dissertations
Natural fibers have received attention in recent years because of their minimal environmental impact, reasonably good properties, and low cost. There is a wide variety of natural fibers suitable for composite applications, the most common of which is flax. Flax has advantages in tensile strength, light weight, and low cost over other natural fibers. As with other natural and synthetic fibers, flax is used to reinforce both thermoset and thermoplastic matrices. When flax is used in thermoplastic matrices, polypropylene and polyethylene are the main resins used. Although at first glance flax may seem to be a cheaper alternative to fiberglass, …
Design, Fabrication, Structural Testing, And Numerical Analysis Of A Small Scale Composite Wing,
2010
California Polytechnic State University, San Luis Obispo
Design, Fabrication, Structural Testing, And Numerical Analysis Of A Small Scale Composite Wing, Jacob David Gaunt, Juan Carlos Flores, Vincent Andrew Perry
Aerospace Engineering
A small scale composite wing based on a design found on an experimental aircraft was designed, constructed, and tested dynamically and statically. The wing was constructed similarly to an experimental aircraft wing. The performed static test was intended to produce pure bending. Strain gages were used to measure strains on the wing structure. The strains were converted to stresses to aid in analysis. The static test results suggested that the wing was actually under torsion. Four structural modes were found from the static test. A finite element analysis model was made to compare experimental results to numerical analytical results. The …
Me-Em Enewsbrief, June 2010,
2010
Michigan Technological University
Me-Em Enewsbrief, June 2010, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University
Department of Mechanical and Aerospace Engineering eNewsBrief
No abstract provided.
Preparation And Electrochemical Performance Of Three-Dimensional Porous Snco Alloy Electrode,
2010
Department of Chemistry,College of Chemistry and Chemical Engneering,;
Preparation And Electrochemical Performance Of Three-Dimensional Porous Snco Alloy Electrode, Lian-Jie Xue, Ling Huang, Fu-Sheng Ke, Guo-Zhen Wei, Xiao-Mei Zheng, Jun-Tao Li, Xiao-Yong Fan, Shi-Gang Sun
Journal of Electrochemistry
Three-dimensional porous Cu film was prepared by electroless plating,and used as a current collector for preparation of three-dimensional structured SnCo alloy electrode,which was mainly prepared by an electrodeposition method,and composed of pure Sn and CoSn2 phases. Electrochemical experimental results show that three-dimensional structured SnCo alloy electrode exhibits much better cycleability than planar SnCo alloy electrode,with first discharge capacity and charge capacity of 636. 3 and 528. 7 mAh·g-1,respectively. After 70th cycling,capacity retention is 83. 1% with 529. 5 mAh·g-1. The lithiation process during first discharge was investigated by electrochemical impedance spectroscopy.
Research On Electrochemical Performance Of Lithium-Ion Battery Cathode Material Lini(1/3)Co(1/3)Mn(1/3)O2 In Aqueous Lino3 Solution,
2010
State Key Lab of Physical Chemistry of Solid Surfaces, Department of Chemistry, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005,Fujian,China;
Research On Electrochemical Performance Of Lithium-Ion Battery Cathode Material Lini(1/3)Co(1/3)Mn(1/3)O2 In Aqueous Lino3 Solution, Jun Zheng, Xin Jia, Chong Wang, Ming-Sen Zheng, Quan-Feng Dong
Journal of Electrochemistry
The cathode material of LiNi1/3Co1/3Mn1/3O2 synthesized by sol-gel method shows excellent high rate performance, and high output power density during discharge process. A well-ordered layered α-NaFeO2 structure was confirmed by XRD and a primary particle size of about 500 nm was indicated by SEM. Galvanostatic charge-discharge test indicates that LiNi1/3Co1/3Mn1/3O2 in 2 mol·L-1 LiNO3 aqueous solution with pH 12 reached a ca-pacity of 147 mAh/g while charged and discharged at 2C. The capacities were 64, 33, 16 mAh/g with 80C (14.4 A/g), 150C …
Fabrication Of Electrochemically Activated Glassy Carbon/Bismuth Film Electrodes For Sensitive Analysis Of Pb(2+) And Cd(2+),
2010
Department of Chemistry, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, Fujian, China;
Fabrication Of Electrochemically Activated Glassy Carbon/Bismuth Film Electrodes For Sensitive Analysis Of Pb(2+) And Cd(2+), Kang Shi, Wen-Jing Wang, Kun Hu
Journal of Electrochemistry
The application of electrochemically activated glassy carbon (GC) in the in-situ preparing of bismuth film electrodes (BiFEs) to analyze Pb2 + and Cd2 + was investigated. The glassy carbon electrodes were electrochemically activated by either potentiostic or cyclic polarization in 1 mol·L-1 NaOH solution. Experimental results show that employment of HCl solution as the analytical solution not only can reproducibly renew the electrochemically activated GC electrode surface with an electrochemical clear procedure, but also can greatly enhance the sensitivity of BiFes method for analysis of Pb2 + and Cd2 +. The test range thus …
Preparation And Application Of Ti/Ceo2-F-Pbo2 Electrode In Electrochemical Degradation Of Organics,
2010
College of Chemical Engineering and Materials Science, State Key Laboratory Breeding Base of Green Chemistry-Synthesis Technology, Zhejiang University of Technology, Hangzhou 310032, China;
Preparation And Application Of Ti/Ceo2-F-Pbo2 Electrode In Electrochemical Degradation Of Organics, Xun-Hua Wang, Tie-Ming Zhang, Shao-Ping Tong, Chun-An Ma
Journal of Electrochemistry
The CeO2-modified PbO2 on Ti plate (Ti/CeO2-F-PbO2) was prepared by electrodeposition. The SEM and XRD analyses indicated that the CeO2 particle could be beuniformly co-deposited in the film of PbO2. The results of electrochemical test showed that the Ti/CeO2-F-PbO2 anode had higher potential (1.83 V. vs. SCE) for oxygen evolution (OE) than the Ti/F-PbO2 anode (1.78 V,vs. SCE). The degradation of 4-chlorophenol was carried out to test electrocatalytic performance of this novel electrode, which indicated that Ti/CeO2-F-PbO2 anode had high COD removal rate …
Failure Reaction Mechanism Of Internal Short-Circuit For Lithium-Ion Batteries,
2010
Tianjin Lishen Battery Joint-Stock CO.,LTD, Tianjin 300384, China;
Failure Reaction Mechanism Of Internal Short-Circuit For Lithium-Ion Batteries, He Li, Shen-Jun Yu, Zhi-Kui Chen, Guang-Chuan Liang
Journal of Electrochemistry
In this work, the battery impact testing machine has been used to study the failure progress of internal short-circuit (ISC) for lithium ion batteries. The reaction mechanisms between cathode/anode and electrolyte in the battery at different temperatures were characterized by differential scanning calorimetry (DSC), gas chromatography/mass spectrometry (GC/MS) and X-ray diffraction (XRD). The experimental results show that the ISC failure of the battery was mainly due to the reaction between cathode Li0.5CoO2 and electrolyte. The decomposition and oxygen evolution reactions of cathode occurred when the temperature reached a certain value. At the same time a fierce oxidation …
Electrochemical Behaviors Of Hydrazine In Bmimpf6 Solution At Ag Electrode,
2010
College of Life and Environment Sciences, Shanghai Normal University, Shanghai 200234, China;
Electrochemical Behaviors Of Hydrazine In Bmimpf6 Solution At Ag Electrode, Jie Sun, Yan Li, Yi-Ling Feng, Rong Wang, Xia-Qin Wu
Journal of Electrochemistry
In this work, the electrochemical behaviors of hydrazine at Ag electrode in the room temperature ionic liquid, BmimPF6, were studied by cyclic voltammetry. Results suggested that Ag electrode showed a good catalytic activity towards hydrazine oxidation. The catalytic peak current showed a good linear relationship with the hydrazine concentration in the range of 0 ～ 3.4 mmol/L. The rate-determining step of the electrocatalytic reaction involved one electron transfer form hydrazine molecule to Ag+ ion.
Synthesis And Electrochemical Properties Of Li3V2(Po4)3/C Cathode Materials For Lithium Ion Battery,
2010
Faculty of Material and Energy,Guongdong University of Technology,Guangzhou,518006, China; McNair Technology Co. Ltd, Dongguan 523800, Guangdong, China;
Synthesis And Electrochemical Properties Of Li3V2(Po4)3/C Cathode Materials For Lithium Ion Battery, Li-Ying Liu, Hai-Yan Zhang, Lian Chen, Yu-Chun Zhai
Journal of Electrochemistry
Cathode material Li3V2(PO4) 3 /C for Lithium-ion battery was synthesized by combination of ball milling and baking. Physical and electrochemical performances of as-prepared materials were characterized through XRD,EIS and galvanostatic cell cycling. The results show that the products were monoclinic Li3 V2 (PO4) 3 with well-developed crystal structure. At 0. 1C,0. 25C and 0. 5C,the initial discharge capacities were 150. 6,134. 1 and 107. 1 mAh·g-1 ,respectively. Capacity retention rates were 87. 3% after 130 cycles at 0. 25C and 87. 2% after 105 cycles at 0. 5C. Charge-discharge …
Optimization Of Membrane Electrode Assembly In Air-Breathing Direct Methanol Fuel Cell,
2010
Changchun Institute of Applied Chemistry, Clean Energy Department, Changchun 130022, China;
Optimization Of Membrane Electrode Assembly In Air-Breathing Direct Methanol Fuel Cell, Liang Ma, Wei-Wei Cai, Jing Zhang, Liang Liang, Jian-Hui Liao, Chang-Peng Liu, Wei Xing
Journal of Electrochemistry
The structure and performance of MEA were optimized by tailoring the catalyst layer,cathodic microporous layer (MPL) ,anodic MPL and membrane,with the considerations of unique characteristics of airbreathing direct methanol fuel cell (DMFC) such as methanol crossover and cathode flooding. It was found that high catalyst loading could suppress the methanol crossover effectively,but too high catalyst loading can lead to high mass transport resistance. Hydrophobic anodic MPL with 30% (by mass) PTFE could facilitate the CO2 bubble detachment,which decreased the methanol concentration gradient and suppressed the methanol crossover accordingly. When Nafion 115 was used as membrane,methanol crossover was severe,while Nafion …
A High Performance Sulfur/Carbon Xerogel Composite In Lithium Sulfur Battery Application,
2010
State Key Lab of Physical Chemistry of Solid Surfaces,Department of Chemistry, College of Chemistry and Chemical Engineering,Xiamen University,Xiamen 361005,Fujian,China;
A High Performance Sulfur/Carbon Xerogel Composite In Lithium Sulfur Battery Application, Chong Wang, Jia-Jia Chen, Qiu-Jie She, Qian Zhang, Yi-Ning Shi, Ming-Sen Zheng, Quan-Feng Dong
Journal of Electrochemistry
Sulfur/carbon composite was synthesized by the thermal method with the carbon xerogel as the conductive framework. The property of composite was characterd by XRD and SEM. It shown that the composite with the particle size below 10 μm had the same morphology as the carbon xerogel and the sulfur was absorbed in the pores in non-crystalline. The discharge capacity of the composites were 1311 mAh/g and 1107. 1 mAh/g at 0. 1C and 0. 2 C rates,respetively. And a retention capacity was about 800 mAh/g after 30 cylcyes.
