Engineering Science and Materials Commons^™

Low-Temperature Performance Of Li-Ion Battery With Fluoroethylene Carbonate Electrolyte, Chun-Wei Yang, Feng Wu, Bo-Rong Wu, Yong-Huan Ren, Jing-Wen Yao

Journal of Electrochemistry

The low temperature performance of electrolytes containing FEC including FEC+EMC, EC and PC, as well as the compatibility of electrolytes with LiFePO₄ anode and with MCMB cathode were investigated.The electrolyte exhibits a high value of ionic conductivity at low temperature.The stability of cathode was enhanced by the formation of SEI film at 1.6 V as a result of FEC reaction. The infrared spectra showed that FEC can suppress decomposition of other solvents during SEI formation, and lower the resistance of SEI on MCMB cathode. The electrochemistry test indicates that Li-ion batteries with FEC electrolyte display high capacity at low …

Influence Of Electric Field On The Adsorption And Bioactivity Of Hemoglobin On A Macroporous Gold Electrode, Cui-Hong Wang, Yi-Bing Kong, Xing-Hua Xia

Journal of Electrochemistry

The adsorption and bioactivity of proteins at interfaces have been widely studied due to their important role in the construction of biosensors,bioelectronics and biofuel cells.Interfacial electric field is one of the important factors which could affect the adsorption and bioactivity of proteins at materials surfaces.It could dramatically change the adsorption density,molecular conformation and orientation at material surfaces.In this paper,the influence of interfacial electric field on the adsorption kinetics and bioactivity of hemoglobin(Hb) on a three-dimensional(3D) macroporous gold electrode surface has been studied using electrochemical methods and infrared spectroscopy.It was found that the interfacial electric field created excess surface charge which …

Synthesis Of Mesoporous Nickel Oxide For Supercapacitor Application, Xuan-Xuan Chen, Zhen-Zhen Zhao, Deng-Chao Wang, Zhong-Jie Huang, Wen-Bin Ni, Li Yu, Jian-Wei Zhao

Journal of Electrochemistry

Mesoporous nickel oxide has been synthesized by calcining metal-organic coordination precursor.Transmission electron microscopy and BET test showed that the prepared NiO had a regular morphology and displayed a narrow size distribution.Electrochemical tests revealed that such mesoporous NiO had a specific capacity of 72 F·g^-1 at the current of 2.0 A·g^-1.Futhermore,the material showed excellent cycle-life stability.There was no degradation of capacitance after 1000 cycles.

A Titanium-Supported Nanoporous Pd Electrocatalyst For Methanol Oxidation, Feng-Juan Niu, Qing-Feng Yi

Journal of Electrochemistry

Titanium-supported nanoporous palladium electrode(nanoPd /Ti) was prepared by a hydrothermal process in the presence of the ligand EDTA and using formaldehyde as reducing agent.SEM images showed that the size of Pd particles was about 60 nm and the Pd particles were connected with each other to form a three-dimensional network structure.Cyclic voltammetry(CV) and electrochemical impedance spectroscopy(EIS) were applied to evaluate the electrocatalytic activity of the nanoPd/Ti electrode towards methanol oxidation in alkaline solution.CV results showed that the nanoPd /Ti electrode presented high anodic peak densities and a low onset potential for methanol oxidation.Also nanoPd /Ti electrode showed excellent CO tolerance …

Electrocatalytic Oxidation Of Hydrazine At Rutin Carbon Nanotubes Modified Electrode, Hong-Fang Zhang, Qing-Lin Sheng, Jian-Bin Zheng

Journal of Electrochemistry

The electrochemical behavior and electrocatalytic oxidation of hydrazine on rutin multiwall carbon nanotubes modified glassy carbon electrode were studied by cyclic voltammetry.The experimental results indicated that the electrode exhibits good electrocatalytic activity to hydrazine at a reduced oxidation potential of 262 mV.The amperometric response of the modified electrode showed linear increase after successive addition of hydrazine in the concentration range of 2.5×10^-6~1.0×10^-4 mol·L-1 with a detection limit of 5×10^-7 mol·L^-1.

Applications Of Raman Spectroscopy Technique In Lithium Ion Batteries, Liang Zhao, Yong-Sheng Hu, Hong Li, Zhao-Xiang Wang, Hong-Xing Xu, Xue-Jie Huang, Li-Quan Chen

Journal of Electrochemistry

The Raman spectroscopy has been widely used in the study of lithium ion batteries.In this short review,we gave some examples of the applications of Raman spectroscopy in the study of electrode materials including carbonaceous materials,spinel LiM_xMn_2-x O₄,LiFePO₄,as well as polymer electrolytes,room temperaturemolten salt electrolytes and the solid-electrolyte interphase layers.The advantages and disadvantages of the ex-situ and in-situ Raman spectrum techniques are discussed.Using new Raman techniques to investigate Li-ion batteries are suggested.

Novel Anion Exchange Membranes Base On Copolymer Of 2-(Diethylamino) Ethyl Methacrylate And Fluoro-Polyacrylate For Alkaline Direct Methanol Fuel Cells, Yan-Mei Zhang, Jun Fang, Ge Yan, Yong-Ze Zhuang

Journal of Electrochemistry

Anion exchange membrane fuel cells,which use anion exchange membranes as polyelectrolytes,have attracted more and more research interests recently.In this work,a series of hydroxyl-conducting anion-exchange membranes based on the copolymer of 2-(Diethylamino)ethyl methacrylate and fluoro-polyacrylate were prepared by radical polymerization,and their potential applications in alkaline fuel cells were assessed.It was shown that the ionic conductivity of the membranes reached 10^-2 S·cm^-1 at room temperature,while the methanol permeability was lower than 10^-7 cm²·s^-1.The maximum power density of fuel cell assembled with this membrane was achieved to be 43.2 mW·cm^-2 at room temperature,indicating possible application …

Electrooxidation Of Methanol On Multilayer Films Of Polypyrrole-Platinum Electrode, Ling Zhang, Long-Zhen Zheng

Journal of Electrochemistry

Multilayer films of polypyrrole-platinum electrode were fabricated by cyclic voltammetric technique.Electro-oxidation of methanol on this electrode was investigated with the aid of cyclic voltammetry and chronoamperometry.Results demonstrated that the multilayer of polypyrrole-platinum electrode behaved better electrocatalytic performance for electro-oxidaton of methanol and better poison resistant.Furthermore,with the increase of deposited platinum loadings,the rate controlling step on electro-oxidation reaction of methanol was changed from CO oxidation to sorption-desorption of hydrogen.

Electrochemical Capacitive Performance Of Polyaniline Electrode With Different Electrolytes, Yong-Tao Tan, Fen Ran, Ling-Ren Wang, Ji Liu, Ling-Bin Kong, Yong-Chun Luo, Long Kang

Journal of Electrochemistry

The polyaniline(PANi) for supercapacitor was prepared by chemical-oxidative polymerization.The SEM,FTIR data and electrochemical performance showed that,polyaniline nanoparticles were formed which were about 50 nm;the specific capacitances of PANi were 404 F/g,208 F/g and 279 F/g in 1 mol/L H₂SO₄,NaNO₃ and KOH,respectively,when the current density was 5 mA/cm².The concentrations of H₂SO₄ increased to 2 mol/L or 6 mol/L,the capacitances decreased to 330 F/g or 248 F/g.

Electrochemical Deposition Of Zinc Oxide Crystal Whiskers, Peng-Zeng Lu, Su Li, Jin-Qian Jia, Zhen-Hai Liang

Journal of Electrochemistry

Pine needle ZnO crystal whiskers were electrodeposited by anodization of zinc foil.The crystal whiskers were characterized by scanning electron microscopy(SEM) and X-ray diffraction(XRD) spectroscopy.The results show that the lengths and diameters of ZnO crystal whiskers are 200~300 nm and 20~50 nm,respectively,with the ratio of the length to diameter ranging from 10~15.The whiskers belong to wurtzite ZnO(JCPDS 36-1451) with good crystallinity and high purity.The crystalization behavior of ZnO was studied by cyclic voltammetry.The effects of the surface oxide layer at the zinc substrates and the [Zn(OH)₄]^2-concentration of the aqueous electrolyte on the formation of zinc oxide whiskers …

On The Stability Of A Microstructure Model, Mihhail Berezovski, Arkadi Berezovski

Publications

The asymptotic stability of solutions of the Mindlin-type microstructure model for solids is analyzed in the paper. It is shown that short waves are asymptotically stable even in the case of a weakly non-convex free energy dependence on microdeformation.

Structure And Properties Of Graphene Nano Disks (Gnd) With And Without Edge-Dopants, Pubodee Ratana-Arsanarom

Dissertations, Master's Theses and Master's Reports - Open

Graphene is one of the most important materials. In this research, the structures and properties of graphene nano disks (GND) with a concentric shape were investigated by Density Functional Theory (DFT) calculations, in which the most effective DFT methods - B3lyp and Pw91pw91 were employed.

It was found that there are two types of edges - Zigzag and Armchair in concentric graphene nano disks (GND). The bond length between armchair-edge carbons is much shorter than that between zigzag-edge carbons. For C24 GND that consists of 24 carbon atoms, only armchair edge with 12 atoms is formed. For a GND larger …

Me-Em 2011 Annual Report, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering Annual Reports

Table of Contents

• ME-EM: 85 Years of Excellence
• Faculty & Staff
• Enrollment & Degrees
• Alumni
• Resources
• Graduates

Technique To Measure Heats Of Reaction Of Ti-B, Al-Ti-B, And Al-Ti-B4c Powder Blends, Andrew H. Baker

Dissertations, Master's Theses and Master's Reports - Open

In this research, a modification to initiation aid ignition in bomb calorimetry that involves systemically blending levels of boron and potassium nitrate initiation aids with a bulk structural energetic elemental power blend is developed. A regression is used to estimate the nominal heat of reaction for the primary reaction. The technique is first applied to the synthesis of TiB2 as a validation study to see if close proximity to literature values can be achieved. The technique is then applied to two systems of interest, Al-Ti-B, and Al-Ti-B4C. In all three investigations, x-ray diffraction is used to characterize the product phases …

Effect Of Fullerene Nano-Spheres On Evaporation Kinetics Of Fluids, Wenhu Wang

Browse all Theses and Dissertations

As the interest in fluid evaporation kinetics keeps increasing, it's inevitably noticed that fullerene nanospheres play an important role on it. In this study, we investigate the C60 nanospheres' effect on the evaporation kinetics and thermal transitions of different solvents (water, chlorobenzene) over the entire range of solubility. According to distinct polarity of different solvent, fullerene solution would behave differently, the trend of increasing in evaporation rate as the concentration increased was observed in aromatic solvents while the rate kept decreasing in water. The result of differential scanning calorimetry (DSC) and Raman spectroscopy provided an evidence about structuring in water …

Simulation Of Electrospun Nanofiber Deposition On Stationary And Moving Substrates, Linhua Liu, Yuris A. Dzenis

Department of Mechanical and Materials Engineering: Faculty Publications

Electrospinning produces continuous fibers with diameters from single nanometers to microns by jetting polymer solutions in high electric fields. Electrospun non-woven filamentary materials attract rapidly growing interest for broad range of applications. Properties of these materials depend on their nano- and microstructure that is determined in turn by the electric field and nanofiber collector. Despite critical importance, deposition of electrospun fibers on substrates has not yet been extensively studied theoretically and new methods of nanofiber collection continue to be developed mostly empirically. The objective of this Letter was to develop and demonstrate numerical simulation of electrospun nanofiber deposition on moving …

Modeling Of Solvent Evaporation From Polymer Jets In Electrospinning, Xiang-Fa Wu, Yury Salkovskiy, Yuris A. Dzenis

Department of Mechanical and Materials Engineering: Faculty Publications

Solvent evaporation plays a critical role in nanofiber formation in electrospinning. Here, we present a nonlinear mass diffusion-transfer model describing the drying process in dilute polymer solution jets. The model is used to predict transient solvent concentration profiles in polyacrylonitrile/ N,N-dimethylformamide (PAN/DMF) jets with the initial radii ranging from 50µm down to 100 nm. Numerical simulations demonstrate high transient inhomogeneity of solvent concentration over the jet cross-section in microscopic jets. The degree of inhomogeneity decreases for finer, submicron jets. The simulated jet drying time decreases rapidly with the decreasing initial jet radius, from seconds for microjets to single milliseconds for …

Intermediate Layers In Tandem Organic Solar Cells, Yongbo Yuan, Jinsong Huang, Gang Li

Department of Mechanical and Materials Engineering: Faculty Publications

Tandem structures can boost the efficiency of organic solar cell to more than 15%, compared to the 10% limit of single layer bulk heterojunction devices. Design and fabricating of intermediate layers plays a very important role to achieve high device performance. This article will review the main experimental progresses of tandem organic solar cells, and focus on the intermediate layers (charge recombination layers) in both thermal evaporated and solution processed organic tandem solar cell devices.

A Model Of Giant Vacuole Dynamics In Human Schlemm’S Canal Endothelial Cells, Ryan M. Pedrigi, David Simon, Ashley Reed, W. Daniel Stamer, Darryl R. Overby

Department of Mechanical and Materials Engineering: Faculty Publications

Aqueous humour transport across the inner wall endothelium of Schlemm’s canal likely involves flow through giant vacuoles and pores, but the mechanics of how these structures form and how they influence the regulation of intraocular pressure (IOP) are not well understood. In this study, we developed an in vitro model of giant vacuole formation in human Schlemm’s canal endothelial cells (HSCECs) perfused in the basal-to-apical direction (i.e., the direction that flow crosses the inner wall in vivo) under controlled pressure drops (2 or 6 mmHg). The system was mounted on a confocal microscope for time-lapse en face imaging, and cells …

Freeze-Thawing Of Polyester/E-Glass As An Evaluation Of An Astm International Test Standard Proposal, Stefan Mauritz Strandlund

Electronic Theses and Dissertations

American Composites Manufacturers Association (ACMA) reported in 2009 that the four major sectors currently utilizing fiber reinforced polymers (FRP) are construction, corrosion, marine, and transportation in descending order of total FRP shipped. All of these sectors are known to be billion dollar industries and they are all involved with applications subjected to freezing and thawing. FRP encompass many characteristics that are beneficial to these sectors and also in resisting this exposure. ASTM International has yet not developed a standard to test FRP materials resistance to freeze-thaw (FT) cycling exposure. The D20.18.02 committee of the ASTM is in the process of …