Beauchemin Residence,
2018
California Polytechnic State University, San Luis Obispo
Beauchemin Residence, Hannah E. Rogers
Architectural Engineering
The following report details the structural engineering completed on the Beauchemin Residence, as well as the associated drawings, details, and special considerations. The Beauchemin Residence is an existing single story wood frame building on raised wood floor, located in the city of San Clemente. The scope of work includes calculations for a new roof, new walls (gravity & lateral), retrofit of the existing foundation, new foundation, and providing calculations. The process and progression of the structural design is documented, and correlated to the final product in the Appendix A & B.
Eigenstrain As A Mechanical Set-Point Of Cells,
2018
University of Nebraska-Lincoln
Eigenstrain As A Mechanical Set-Point Of Cells, Shengmao Lin, Marsha C. Lampi, Cynthia A. Reinhart-King, Gary C.P. Tsui, Jian Wang, Carl A. Nelson, Linxia Gu
Department of Mechanical and Materials Engineering: Faculty Publications
Cell contraction regulates how cells sense their mechanical environment. We sought to identify the set-point of cell contraction, also referred to as tensional homeostasis. In this work, bovine aortic endothelial cells (BAECs), cultured on substrates with different stiffness, were characterized using traction force microscopy (TFM). Numerical models were developed to provide insights into the mechanics of cell–substrate interactions. Cell contraction was modeled as eigenstrain which could induce isometric cell contraction without external forces. The predicted traction stresses matched well with TFM measurements. Furthermore, our numerical model provided cell stress and displacement maps for inspecting the fundamental regulating mechanism of cell …
An Integrated Microstructural-Nanomechanical-Chemical Approach To Examine Material-Specific Characteristics Of Cementitious Interphase Regions,
2018
University of Nebraska-Lincoln
An Integrated Microstructural-Nanomechanical-Chemical Approach To Examine Material-Specific Characteristics Of Cementitious Interphase Regions, Mahdieh Khedmati, Yong-Rak Kim, Joseph A. Turner, Hani Alanazi, Charles Nguyen
Department of Mechanical and Materials Engineering: Faculty Publications
Effective properties and structural performance of cementitious mixtures are substantially governed by the quality of the interphase region because it acts as a bridge transferring forces between aggregates and a binding matrix and is generally susceptible to damage. As alternative binding agents like alkali-activated precursors have obtained substantial attention in recent years, there is a growing need for fundamental knowledge to uncover interphase formation mechanisms. In this paper, two different types of binding materials, i.e., fly ash-based geopolymer and ordinary portland cement, were mixed with limestone aggregate to examine and compare the microstructures and nanomechanical properties of interphase region. To …
Methods, Systems, And Devices For
Surgical Access And Procedures,
2018
University of Nebraska-Lincoln
Methods, Systems, And Devices For Surgical Access And Procedures, Shane M. Farritor, Mark Rentschler, Amy Lehman, Stephen R. Platt, Jeff Hawks
Department of Mechanical and Materials Engineering: Faculty Publications
The embodiments disclosed herein relate to various medical device components, including components that can be incorporated into robotic and/or in vivo medical devices. Certain embodiments include various actuation system embodiments, including fluid actuation systems, drive train actuation systems, and motorless actuation systems. Additional embodiments include a reversibly lockable tube that can provide access for a medical device to a patient's cavity and further provides a reversible rigidity or stability during operation of the device. Further embodiments include various operational components for medical devices, including medical device arm mechanisms that have both axial and rotational movement while maintaining a relatively compact …
Excess Charge-Carrier Induced Instability Of Hybrid
Perovskites,
2018
University of North Carolina
Excess Charge-Carrier Induced Instability Of Hybrid Perovskites, Yuze Lin, Bo Chen, Yanjun Fang, Jingjing Zhao, Chunxiong Bao, Zhenhua Yu, Yehao Deng, Peter N. Rudd, Yanfa Yan, Yongbo Yuan, Jinsong Huang
Department of Mechanical and Materials Engineering: Faculty Publications
Identifying the origin of intrinsic instability for organic–inorganic halide perovskites (OIHPs) is crucial for their application in electronic devices, including solar cells, photodetectors, radiation detectors, and light-emitting diodes, as their efficiencies or sensitivities have already been demonstrated to be competitive with commercial available devices. Here we show that free charges in OIHPs, whether generated by incident light or by current-injection from electrodes, can reduce their stability, while efficient charge extraction effectively stabilizes the perovskite materials. The excess of both holes and electrons reduce the activation energy for ion migration within OIHPs, accelerating the degradation of OIHPs, while the excess holes …
Visible Light Crosslinkable Human Hair Keratin Hydrogels,
2018
Harvard Medical School
Visible Light Crosslinkable Human Hair Keratin Hydrogels, Kan Yue, Yanhui Liu, Batzaya Byambaa, Vaishali Singh, Wanjun Liu, Xiuyu Li, Yunxia Sun, Yu Shrike Zhang, Ali Tamayol, Peihua Zhang, Kee Woei Ng, Nasim Annabi, Ali Khademhosseini
Department of Mechanical and Materials Engineering: Faculty Publications
Keratins extracted from human hair have emerged as a promising biomaterial for various biomedical applications, partly due to their wide availability, low cost, minimal immune response, and the potential to engineer autologous tissue constructs. However, the fabrication of keratin-based scaffolds typically relies on limited crosslinking mechanisms, such as via physical interactions or disulfide bond formation, which are time-consuming and result in relatively poor mechanical strength and stability. Here, we report the preparation of photocrosslinkable keratin-polyethylene glycol (PEG) hydrogels via the thiol-norbornene “click” reaction, which can be formed within one minute upon irradiation of visible light. The resulting keratin-PEG hydrogels showed …
Methods, Systems, And Devices
Relating To Force Control
Surgical Systems,
2018
University of Nebraska-Lincoln
Methods, Systems, And Devices Relating To Force Control Surgical Systems, Shane M. Farritor, Thomas Frederick, Kearney Lackas, Joe Bartels, Jacob Greenburg
Department of Mechanical and Materials Engineering: Faculty Publications
The various embodiments herein relate to robotic surgical systems and devices that use force and/or torque sensors to measure forces applied at various components of the system or device. Certain implementations include robotic surgical devices having one or more force/torque sensors that detect or measure one or more forces applied at or on one or more arms. Other embodiments relate to systems having a robotic surgical device that has one or more sensors and an external controller that has one or more motors such that the sensors transmit information that is used at the controller to actuate the motors to …
Frequency Dependent Deformation Reversibility
During Cyclic Loading,
2018
Louisiana State University
Frequency Dependent Deformation Reversibility During Cyclic Loading, Shuai Shao, Michael M. Khonsari, Jian Wang, Nima Shamsaei, Nan Li
Department of Mechanical and Materials Engineering: Faculty Publications
High-frequency testing (HFT) is useful for accelerated fatigue testing of conventional materials that typically serve under low-frequency loading conditions, as well as for the assessment of the robustness of microelectromechanical systems which typically experience high-frequency service conditions. Using discrete dislocation dynamics, we attempt to elucidate the effect of loading frequency on the reversibility of cyclic deformation. We demonstrate that the HFT induces a higher fraction of reversible cyclic deformation because of a larger portion of elastic/anelastic deformation due to limited dislocation mobility, and a higher degree of reversibility in plastic deformation owing to the less occurrence of cross-slip.
An Integrated Microstructural-Nanomechanical-Chemical Approach To Examine Material-Specific Characteristics Of Cementitious Interphase Regions,
2018
University of Nebraska-Lincoln
An Integrated Microstructural-Nanomechanical-Chemical Approach To Examine Material-Specific Characteristics Of Cementitious Interphase Regions, Mahdieh Khedmati, Yong-Rak Kim, Joesph A. Turner, Hani Alanazi, Charles Nguyen
Department of Mechanical and Materials Engineering: Faculty Publications
Effective properties and structural performance of cementitious mixtures are substantially governed by the quality of the interphase region because it acts as a bridge transferring forces between aggregates and a binding matrix and is generally susceptible to damage. As alternative binding agents like alkali-activated precursors have obtained substantial attention in recent years, there is a growing need for fundamental knowledge to uncover interphase formation mechanisms. In this paper, two different types of binding materials, i.e., fly ash-based geopolymer and ordinary portland cement, were mixed with limestone aggregate to examine and compare the microstructures and nanomechanical properties of interphase region. To …
Neuroprotective And Anti-Inflammatory Effects Of
Rhus Coriaria Extract In A Mouse Model Of Ischemic
Optic Neuropathy,
2018
Università degli Studi di Milano
Neuroprotective And Anti-Inflammatory Effects Of Rhus Coriaria Extract In A Mouse Model Of Ischemic Optic Neuropathy, Saba Khalilpour, Ghazaleh Behnammanesh, Fouad Suede, Mohammed O. Ezzat, Jayadhisan Muniandy, Yasser Tabana, Mohamed B. K. Ahamed, Ali Tamayol, Amin Malik Shah Majid, Enrico Sangiovanni, Mario Dell'agli, Aman Shah Majid
Department of Mechanical and Materials Engineering: Faculty Publications
Modulating oxidative stresses and inflammation can potentially prevent or alleviate the pathological conditions of diseases associated with the nervous system, including ischemic optic neuropathy. In this study we evaluated the anti-neuroinflammatory and neuroprotective activities of Rhus coriaria (R. coriaria) extract in vivo. The half maximal inhibitory concentration (IC50) for DPPH, ABTS and B-carotene were 6.79 ± 0.009 µg/mL, 10.94 ± 0.09 µg/mL, and 6.25 ± 0.06 µg/mL, respectively. Retinal ischemia was induced by optic nerve crush injury in albino Balb/c mice. The anti-inflammatory activity of ethanolic extract of R. coriaria (ERC) and linoleic acid (LA) on …
Molecular Doping Enabled Scalable Blading Of
Efficient Hole-Transport-Layer-Free Perovskite Solar
Cells,
2018
University of North Carolina
Molecular Doping Enabled Scalable Blading Of Efficient Hole-Transport-Layer-Free Perovskite Solar Cells, Wu-Qiang Wu, Qi Wang, Yanjun Fang, Yuchuan Shao, Shi Tang, Yehao Deng, Haidong Lu, Ye Liu, Tao Li, Zhibin Yang, Alexei Gruverman, Jinsong Huang
Department of Mechanical and Materials Engineering: Faculty Publications
The efficiencies of perovskite solar cells (PSCs) are now reaching such consistently high levels that scalable manufacturing at low cost is becoming critical. However, this remains challenging due to the expensive hole-transporting materials usually employed, and difficulties associated with the scalable deposition of other functional layers. By simplifying the device architecture, hole-transport-layer-free PSCs with improved photovoltaic performance are fabricated via a scalable doctor-blading process. Molecular doping of halide perovskite films improved the conductivity of the films and their electronic contact with the conductive substrate, resulting in a reduced series resistance. It facilitates the extraction of photoexcited holes from perovskite directly …
Characterization Of 3d Printed Polylactic Acid/ Polycaprolactone/Titanium Dioxide Composites For Bone Replacement And Grafting,
2018
University of Texas at El Paso
Characterization Of 3d Printed Polylactic Acid/ Polycaprolactone/Titanium Dioxide Composites For Bone Replacement And Grafting, Sandra Elena Najera Beltran
Open Access Theses & Dissertations
A material that mimics the properties of bones was developed by optimizing the ratio of polymer composites of polylactic acid (PLA) and poly-ε-caprolactone (PCL), containing small amounts of titanium oxide (TiO2). Although titanium-based alloys have commonly been used for bone replacement procedures due to their biocompatibility with the human body and their mechanical properties, stress shielding continues to be a problem. The structure of a bone has a porosity which permits the flow of nutrients, blood, oxygen and minerals, and is an issue at the time of creating bone replacements using conventional methods. PLA and PCL have been used in …
Solvent And Concentration Effects Governing The Hierarchical Organization Of Asphaltenes: A Small-Angle X-Ray Scattering Study,
2018
University of Texas at El Paso
Solvent And Concentration Effects Governing The Hierarchical Organization Of Asphaltenes: A Small-Angle X-Ray Scattering Study, Hasan Rejoanur Rahman
Open Access Theses & Dissertations
Asphaltenes are a group of planar molecules found in crude oil and are prone to aggregation which often causes blockage of pipes along the oil production stream resulting a huge economic downside. In an effort to understand the hierarchical organization of asphaltene in different solvents and concentrations, the solution structure of various asphaltene solutions were studied using small-angle x-ray scattering (SAXS). Solvents were chosen based on miscibility maps. Such maps are generated on the critical value of the solubility parameter difference between asphaltenes or asphaltene components, and a range of solvents. The critical factors that affect asphaltene and asphaltene component …
Design And Analysis Of A 3d-Printed, Thermoplastic Elastomer (Tpe) Spring Element For Use In Corrective Hand Orthotics,
2018
University of Kentucky
Design And Analysis Of A 3d-Printed, Thermoplastic Elastomer (Tpe) Spring Element For Use In Corrective Hand Orthotics, Kevin Thomas Richardson
Theses and Dissertations--Mechanical and Aerospace Engineering
This thesis proposes an algorithm that determine the geometry of 3D-printed, custom-designed spring element bands made of thermoplastic elastomer (TPE) for use in a wearable orthotic device to aid in the physical therapy of a human hand exhibiting spasticity after stroke. Each finger of the hand is modeled as a mechanical system consisting of a triple-rod pendulum with nonlinear stiffness at each joint and forces applied at the attachment point of each flexor muscle. The system is assumed quasi-static, which leads to a torque balance between the flexor tendons in the hand, joint stiffness and the design force applied to …
Effects Of Air And Other Gases In The Stabilization Process Of The Superprotonic Phase Of Cesium Dihydrogen Phosphate Within A Hermetically Sealed Chamber,
2018
University of Texas at El Paso
Effects Of Air And Other Gases In The Stabilization Process Of The Superprotonic Phase Of Cesium Dihydrogen Phosphate Within A Hermetically Sealed Chamber, Israel Martinez
Open Access Theses & Dissertations
The solid acid CsH2PO4 (CDP), exhibits a sudden increase in its proton conductivity as it’s heated above a certain temperature (around T~235oC), which makes it a very attractive candidate to be used as an electrolyte in intermediate temperature fuel cells. Unfortunately, at these temperatures the sample is not stable, as starts to dehydrate; which causes a dramatic drop in the proton conductivity over a short period of time (less than one hour). In order to inhibit, or at least delay, the dehydration process, the solid acid it’s put under a saturated water vapor atmosphere. Another method to stabilize the highly …
Implementation Of Magnesium Alloy Az91d On Wire And Arc Additive Manufacturing,
2018
University of Texas at El Paso
Implementation Of Magnesium Alloy Az91d On Wire And Arc Additive Manufacturing, David Adrian Martinez Holguin
Open Access Theses & Dissertations
As progress on Additive Manufacturing (AM) techniques focusing on ceramics and polymers evolve, metals continue to be a challenging material to manipulate when fabricating products. Current methods, such as Selective Laser Sintering (SLS) and Electron Beam Melting (EBM) face many intrinsic limitations due to the nature of their processes. Material selection, elevated cost and low deposition rates are some of the barriers to consider when one of these methods is to be used for the fabrication of engineering products. The research here presented demonstrates the use of a Wire and Arc Additive Manufacturing (WAAM) system for the creation of metallic …
Magnetic And Catalytic Properties Of Transition Metal Doped Mos2 Nanocrystals,
2018
University of Texas at El Paso
Magnetic And Catalytic Properties Of Transition Metal Doped Mos2 Nanocrystals, Luis Martinez
Open Access Theses & Dissertations
Magnetism and catalytic activity of nanoscale layered two-dimensional (2D) transition metal dichalcogenides (TMDs) have gained an increasing research interest in the recent past. To broaden the current knowledge and understanding on this subject, in this work, together with my collaborators, I study the magnetic and electrocatalytic properties of hydrothermally grown pristine and transition metal doped (10% of Co, Ni, Fe and Mn) 2H-MoS2 nanosheets/nanocrystals (NCs), with the particle size of 25-30 nm. A broad range of experimental measurements such as x-ray diffraction, transmission electron microscopy, x-ray photo absorption spectroscopy, Raman spectroscopy, magnetic, catalytic and electron spin resonance have been employed …
Tribological Characterization Of Ti-Based Alloys For Biomedical Applications In Simulated Body Fluid,
2018
University of Texas at El Paso
Tribological Characterization Of Ti-Based Alloys For Biomedical Applications In Simulated Body Fluid, Edgar Reyes
Open Access Theses & Dissertations
Tribology is a terminology introduced in the 1960's and it is a study that relates to the investigation of the damage of materials. Titanium, as a material used for a wide range of application, it has been brought to the attention of researchers some characteristics such as its much lower density if compared to steel, its capability as an alloying agent with an amount of metals to enhance physical and mechanical properties, to name just a few characteristics. This paper will discuss the performance on tribology behavior in two different Titanium alloys. These Titanium alloys are Ti-6Al-4V (Ti64), and Ti-24Nb-4Zr-8Sn …
Development And Characterization Of Novel Materials For The Advancement Of Additive Manufacturing By Material Extrusion 3d Printing,
2018
University of Texas at El Paso
Development And Characterization Of Novel Materials For The Advancement Of Additive Manufacturing By Material Extrusion 3d Printing, Jose Gilberto Siqueiros
Open Access Theses & Dissertations
The development of additive manufacturing technologies has been under the spotlight from the past decade due to its enormous potential to disrupt current manufacturing processes. Material extrusion 3D printing (ME3DP) is the most common type of additive manufacturing technology as it experienced an exponential growth after the expiration of the fused deposition modeling patent filed in 1989 by Scott Crump. The large interest behind this technology is generated from the capacity to create complex shapes, rapid prototyping, relatively ease of use, low cost, and high accessibility. The gradual evolution of material extrusion 3D printing calls to become a technology ordinarily …
Tungsten Doping Induced Superior Mechanical Properties Of Hafnium Oxide For Energy Applications,
2018
University of Texas at El Paso
Tungsten Doping Induced Superior Mechanical Properties Of Hafnium Oxide For Energy Applications, Ann Marie Uribe
Open Access Theses & Dissertations
Hafnium oxide, or hafnia, is a high temperature refractory material with good electrical, chemical, optical, and thermodynamic properties. The effects of dopants have been widely studied, especially after the discovery of ferroelectricity induced in hafnia thin films. While attractive and used in the opto-electronic, memory devices, and semiconductor industries, there is a lack in the literature on enhancing the mechanical properties of hafnium oxide, specifically through doping it with tungsten, another material of interest particularly for future high temperature device applications. Thus, this work aimed to grow hafnia thin films doped with varying amounts of tungsten. The samples were grown …
