Transportation Engineering Commons^™

Continuous Long-Term Health Monitoring Using Ultrasonic Wave Propagation, Ece Erdogmus

Nebraska Department of Transportation: Research Reports

No abstract provided.

Experimental Evaluation Of Structural Steel Coating Systems, Elias Anis Toubia, Sadra Emami

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Departments of transportation (DOTs) currently use the conventional three-coat system as the predominant choice for the corrosion protection of steel bridge structures. Eliminating one step in the coating process could potentially save time and cost associated with lane closures and traffic control costs. This research paper evaluates several two-coat systems based on the zinc-rich primer and polysiloxane topcoat technology. All samples were conditioned and coated in a state-of-the-art, climate-controlled paint booth, simulating common field ENvironmental CONditions (ENCON) (ENCON 1: 25 °C/50% RH, ENCON 2: 10 °C/40%RH, and ENCON 3: 32°C/80% RH). Accelerated weathering tests were performed on 435 coated samples …

M049 Effects Of Compaction And Soil Moisture On American Burying Beetles, W. Wyatt Hoback

Nebraska Department of Transportation: Research Reports

Silphid beetles in the genus Nicrophorus bury themselves during periods of inactivity, however, the influence of soil characteristics on burial behavior remains unclear. We examined soil preferences of the federally endangered Nicrophorus americanus, as well as of N. carolinus, N. marginatus, N. obscurus, and N. orbicollis, in a series of experiments. Differences in burial depth by sex were found for N. carolinus, N. marginatus, and N. obscurus, which are diurnal species. Both sexes of N. americanus bury to a mean depth of 18 cm. Soil preferences tested included sand versus sandy loam versus sandy loess, degrees of soil moisture, and …

Evaluation Of Dowel Bar Inserter Practices In Pcc Pavements With Magnetic Tomography Technology, Farshad Fallah, Yong-Rak Kim

Nebraska Department of Transportation: Research Reports

Dowel Bar Inserters (DBI) are automated mechanical equipment that position dowel bars in Portland Cement Concrete (PCC) after concrete is placed. Compared to the alternative approach, which is using dowel baskets, DBIs offer advantages in cost and speed of construction. However, as dowel bars are not anchored to the subgrade similar to dowel baskets, there is a concern about the quality of dowel placement using this equipment. Improper placement of dowel bars can lead to reduced load transfer between slabs, which results in pavement distresses such as faulting and spalling at joints. To determine the accuracy of dowel placement by …

Analysis Of Transit Accessibility For People With Disabilities, Rostam Khalid Mohammed Ameen Qatra

Masters Theses

The inconvenience of public transit systems and unavailability of bus stops in the United States has resulted in a heavy reliance on the private automobile. One of the main issues in transit services is accessibility, particularly for people with disabilities. This research is intended to compare estimated job accessibility measures by transit in Kalamazoo county for workers with reduced physical mobility and without. Using OpenTripPlanner (OTP) software, General Transit Feed Specification (GTFS), Open Street Map (OSM) and Longitudinal Employer-Housing Dynamics (LODES) data were analyzed to estimate job accessibility for people with mobility constraints. By using the shortest tree path method, …

Measuring Access To Employment To Guide And Evaluate Public Transit Service Planning In New Orleans, Kevin Harrison

LSU New Orleans Theses and Dissertations

New software and technology is making it easier than ever before for public transportation planners to evaluate how quickly residents can reach jobs and other destinations. Because in the past it was difficult to measure access to opportunities, these concepts remained primarily in the theoretical and academic realms of research. This thesis reviews methods that could be used to evaluate routine bus service improvements and performs a comparative analysis of different methods in the context of New Orleans. There are many different variables in how the analysis could be performed, but this thesis focuses on the role that time of …

Safety Effectiveness Of Pedestrian Crossing Enhancements, Christopher M. Monsere, Miguel Figliozzi, Sirisha Kothuri, Ali Razmpa, Daniel R. Hazel

Civil and Environmental Engineering Faculty Publications and Presentations

Over the last decade, the Oregon DOT and other agencies have systematically implemented many pedestrian crossing enhancements (PCEs) across the state. This study explored the safety performance of these enhanced crossing in Oregon. Detailed data were collected on 191 crossings. Supplemental data items included crossing location information, route characteristics, surrounding land use and crossing enhancement descriptions. Pedestrian volume at the crossing locations was a highly desirable but unavailable data element. To characterize pedestrian activity, a method was developed to estimate ranges for pedestrian crosswalk activity levels based on the land use classification at the census block level and the presence …

Safety Performance Prediction Of Large-Truck Drivers In The Transportation Industry, Emily Moneka Francis Xavier

Graduate Theses and Dissertations

The trucking industry and truck drivers play a key role in the United States commercial transportation sector. Accidents involving large trucks is one such big event that can cause huge problems to the driver, company, customer and other road users causing property damage and loss of life. The objective of this research is to concentrate on an individual transportation company and use their historical data to build models based on statistical and machine learning methods to predict accidents. The focus is to build models that has high accuracy and correctly predicts an accident. Logistic regression and penalized logistic regression models …

Evaluation Of A Supervisor Training Program For Odot’S Ecodrive Program, Donald M. Truxillo, John Macarthur, Leslie B. Hammer, Talya N. Bauer

TREC Final Reports

Eco-driving consists of using energy-efficient approaches to driving aimed at reducing fuel consumption and, ultimately, CO2 emissions. A previous study found that an EcoDrive informational campaign was effective at increasing the use of eco-driving behaviors, but only when employees perceived that their supervisor supported the program and when they were personally motivated to perform the eco-driving behaviors. In order to build upon the findings of our previous study, the present study focused on increasing the use of eco-driving behaviors through an informational eco-driving campaign combined with supervisor training to support the use of eco-driving practices.

In this study we collected …

Evaluating The Effects Of Major Assumptions In Layered Elastic Theory On Railroad Track Response Prediction Through The Development Of An Improved Track Analysis Software, Sadichchha Sharma

Boise State University Theses and Dissertations

Railway transportation has been recently gaining popularity due to its efficiency and environmental-friendly technology which has led to its increased usage for both passenger and freight transport. For railway transport to be a sustainable component of the transportation infrastructure in the United States, adequate structural and functional design of track components is essential. This is primarily dependent on thorough understanding of track mechanics and track structural response under loading, and can be accomplished through mechanistic analysis of railway track structure response under loading. Considering the need for a mechanistic track analysis program that can serve as a link between the …

An Assessment Of Post-Encroachment Times For Bicycle-Vehicle Interactions Observed In The Field, A Driving Simulator, And In Traffic Simulation Models, Ali Razmpa

Dissertations and Theses

Most safety analysis is conducted using crash data. Surrogate safety measures, such as various time-based measures of time-to-collision can be related to crash potential and used to gain insight into the frequency and severity of crashes at a specific location. One of the most common and acknowledged measures is post-encroachment time (PET) which defines the time between vehicles occupying a conflicting space. While commonly used in studies of motor vehicle interactions, studies of PET for bicycle-vehicle interactions are few. In this research, the PET of bicycle-vehicle interactions measured in the field, a driving simulator, and in a micro-simulation are compared. …

Species Distribution Model For Swift Fox In Nebraska, Lucia Corral Hurtado

Nebraska Department of Transportation: Research Reports

No abstract provided.

14-05 Development Of Decision Support Tools To Assess Pedestrian And Bicycle Safety: Development Of Safety Performance Functions, Valerian Kwigizile, Jun-Seok Oh, Ron Van Houten, Keneth Morgan Kwayu

Transportation Research Center Reports

While a number of studies have developed Safety Performance Functions (SPFs) for motorized traffic, there has been a very limited focus on developing SPFs for non-motorized traffic. Lack of exposure measures for pedestrians and bicyclists has been cited often as the obstacle to developing reliable SPFs. This project aimed at developing statewide SPFs for bicyclists and pedestrians at urban intersections. The SPFs developed can be used as a decision supporting tool for planners and practitioners in prioritizing areas for safety improvements. In order to capture crash patterns despite, a carefully designed sampling approach was implemented and improvements on other aspects …

Investigation Of Self-Organizing Traffic Signal Control With Graphical Signal Performance Measures, Christopher M. Day, Darcy M. Bullock

Lyles School of Civil Engineering Faculty Publications

Adaptive signal control is the subject of an increasing amount of research, as well as development and implementation. Most existing adaptive control systems achieve coordination by applying system control as a constraining layer on top of local control. Some researchers have suggested that, with the right local-control logic, coordination might be achieved as an dynamically emergent phenomenon without the need for a management layer. This paper explores the potential of a self-organizing signal control algorithm using a variety of performance measures. First, the initially reported algorithm performance is reproduced in an idealized environment; next, the algorithm is applied in a …

Scalable Dashboard For Identifying Split Failures And Heuristic For Reallocating Split Times, Howell Li, Lucy Richardson, Christopher M. Day, James Howard, Darcy M. Bullock

Lyles School of Civil Engineering Faculty Publications

The three fundamental parameters of a traffic signal system are split, cycle, and offset. This paper describes the use of high-resolution data (a) to identify time periods during which split parameters may be insufficient and (b) to help practitioners identify opportunities for reallocating split time. A case study of seven corridors with 47 intersections is presented. A drill-down approach was developed to identify movements that could be improved by a reallocation of split times. A heuristic that can reallocate up to 5 seconds of underutilized green time on a competing phase was applied to those corridors. …

Detector-Free Optimization Of Traffic Signal Offsets With Connected Vehicle Data, Cristopher Day, Howell Li, Lucy Richardson, James Howard, Tom Platte, Jim Sturdevant, Darcy M. Bullock

Lyles School of Civil Engineering Faculty Publications

It has recently been shown that signal offset optimization is feasible using vehicle trajectory data at low levels of market penetration. This study performs offset optimization on two corridors using this type ofdata. Six weeks oftrajectory splines were processed for two corridors including 25 signalized intersections, in order to create vehicle arrival profiles, using a proposed procedure called "virtual detection." After processing and filtering the data, penetration rates between 0.09-0.80% were observed, varying by approach. The arrival profiles were statistically compared against those measured with physical detectors, with the majority of the approaches showing statistically significant goodness-of-fit at a 90% …

Thin Film Concrete Coatings, Bobby W. Meade, Danny Wells, Theodore Hopwood Ii, Sudhir Palle

Kentucky Transportation Center Research Report

KTC researchers obtained eight types of concrete coatings to assess their performance and resistance to chloride penetration. Researchers evaluated eight of the systems in the field and seven in the laboratory. In the field, coatings were applied to a bridge pier that had suffered degradation and chloride contamination. This site will undergo long term monitoring in order to thoroughly evaluate the coating systems. Adhesion of all products in both field and laboratory application was sufficient to provide a durable coating, and ranged from approximately 500 psi to 1,600 psi. Researchers also tested color and gloss changes, which are early indicators …

Bridge End Settlement Evaluation And Prediction, Jiwen Zhang, Timothy R. Taylor, Roy E. Sturgill

Kentucky Transportation Center Research Report

A bridge approach is usually built to provide a smooth and safe transition for vehicles from the roadway pavement to the bridge structure. However, differential settlement between the roadway pavement that rests on embankment fill and the bridge abutment built on more rigid foundation often creates a bump in the roadway. Previous work examined this issue at a microscopic level and presented new methods for eliminating or minimizing the effects at specific locations.

This research studies the problem at a macroscopic level by determining methods to predict settlement severity; this assists designers in developing remediation plans during project development to …

Chloride Contamination Remediation On Steel Bridges, Bobby W. Meade, Christopher Goff, Sudhir Palle, Theodore Hopwood Ii

Kentucky Transportation Center Research Report

Researchers evaluated 32 steel surface preparation methods to determine how effectively they remove chloride from corroded chloride-contaminated steel panels. Wet methods proved more effective than dry methods. The three most effective wet methods injected mineral slag abrasives in a water stream and resulted in less than 1% chlorides remaining. Most dry surface preparation methods left significantly more chloride contamination after surface preparation. The three most effective dry methods used multiple blast cleaning cycles. These methods approached the effectiveness of the best wet methods, with 1.6 to 2.0% chlorides remaining. The least effective surface preparation was a single abrasive blast cleaning …

Modeling Factors Contributing To Injury And Fatality Of Run-Off-Road Crashes In Ohio, Deogratias Eustace, Omar Eid Almutairi, Peter W. Hovey

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

The main objective of this study was to determine the factors that contribute significantly to the levels of injury severity when run-off-road (ROR) crashes occur. This study used a 5-year crash data for years 2008 - 2012 from the state of Ohio. The decision tree model in conjunction with generalized ordered logit model was used to investigate characteristics of injury and fatality of run-off-road crashes in Ohio.

The decision tree modeling was used for exploratory data analysis identified eight factors that explain a large amount of the variation in the response variable, injury severity. These predictor variables include road condition, …