Preliminary Investigation On The Use Of Dolomitic Quarry By-Product Powders In Grout For Self-Compacting Concrete Applications,
2020
School of Natural and Built Environment, Queens University Belfast, Belfast, Northern Ireland; Tracey Concrete Ltd, Old Rossorry, Sligo Road, Enniskillen BT74 7LF, Northern Ireland
Preliminary Investigation On The Use Of Dolomitic Quarry By-Product Powders In Grout For Self-Compacting Concrete Applications, Ahmed Abdalqader, Katrina Wilson, Neil Thornton, Kieran Mchugh, Mohammed Sonebi, Su Taylor
Civil Engineering Research in Ireland 2020
Self-compacting concrete (SCC) flows under its own weight without requiring external vibration for compaction. This is very useful in applications where normal vibrated concrete cannot be used such as narrow forms and reinforcement congested members. To attain the self-compacting property, it is required that the concrete have adequate viscosity, high deformability and high resistance to segregation. This is can be achieved by adding mineral admixtures (fillers) and/or viscosity modifying agents (VMAs). The former is the main practice in Europe and processed limestone powder is the most commonly used filler in the production of SCC. However, the quarrying process of the …
Thermodynamic Cement Hydration Modelling Using Hydcem,
2020
School of Surveying & Construction Management, Technological University Dublin, Bolton Street, Dublin 1
Thermodynamic Cement Hydration Modelling Using Hydcem, Niall Holmes, Denis Kelliher, Mark Tyrer
Civil Engineering Research in Ireland 2020
Thermodynamics have been successfully applied to the field of cement hydration science to predict the formation of phase assemblages and pore solution chemistry. For any cement hydration model to be accepted, it must provide accurate forecasts of which solids may form and how the cement will dissolve over time. This is particularly important for the ongoing development of new sustainable cements and understanding their hydration behaviour in service.
Predicting Mortar Compressive Strength Using Hydcem,
2020
School of Civil & Structural Engineering, Technological University Dublin, Ireland
Predicting Mortar Compressive Strength Using Hydcem, Ewoma Ogoro, Niall Holmes, Denis Kelliher, Mark Tyrer
Civil Engineering Research in Ireland 2020
The compressive strength of mortar is a significant property that will influence its performance in concrete or masonry. Being able to accurately model and predict the mortar compressive strength would be of great benefit to suppliers and end users alike that could possibly reduce the need for multiple physical testing.
Environmental Impact On Corrosion Rates Of Steel Piles Employed In Marine Environment,
2020
Malachy Walsh and Partners, Park House, Bessboro Rd, Mahon, Cork, Ireland; Department of Civil, Structural and Environmental Engineering, Cork Institute of Technology, Cork, Ireland
Environmental Impact On Corrosion Rates Of Steel Piles Employed In Marine Environment, Rebecca Galvin, Ciaran Hanley, Kieran Ruane, John J. Murphy, Vesna Jaksic
Civil Engineering Research in Ireland 2020
Steel piles employed in a marine environment will deteriorate over their lifetime owing to corrosive effects of the sea. The focus of this research are the causes, effects, and magnitude of the corrosion of steel piles, supporting an on shore jetty. The governing codes of practice in Ireland for designing steel piles are: (i) European Standard I.S. EN 1993-5 – Eurocode 3: Design of steel structures - Part 5: Piling, and (ii) I.S. EN 1993-1-1 – Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings. These codes are discussed, including all aspects of the …
Computational Modelling Of Next Generation Materials For Steel Catenary Risers In The Offshore Industry,
2020
School of Engineering, National University of Ireland, Galway, Galway, Ireland
Computational Modelling Of Next Generation Materials For Steel Catenary Risers In The Offshore Industry, Padraic O'Donoghue, Ronan Devaney, Seán B. Leen
Civil Engineering Research in Ireland 2020
Production risers are used to conduct oil or gas from the wellhead to an offshore production facility. Due to technical challenges with flexible marine pipe at large depths, there has been a move to steel catenary risers (SCRs) in recent years, due to the availability of high strength low alloy (HSLA) steels, such as bainitic X100. HSLA steels make SCRs a viable option for deep water due to the reduction in complexity and hence cost, compared to flexible pipes. However fatigue response is an important factor in their design, particularly in the vicinity of welded connections.
Fish Farm Monitoring For Blue Growth,
2020
Dynamical Systems and Risk Laboratory, School of Mechanical and Materials Engineering, University College Dublin
Fish Farm Monitoring For Blue Growth, Vikram Pakrashi, Wenliang Qiu, Michael O'Byrne, Paul Cahill, Basuraj Bhowmik, Bidisha Ghosh
Civil Engineering Research in Ireland 2020
Fish farms are structures which require unique monitoring. There are problems related to marine growth and overloading, along with breaks in nets. These can lead to damage in fish or attacks of worms, which in turn is responsible for loss of fish. Such loss can be extremely expensive.
Instrumented Trains As A Probe For Structural Health Monitoring Of Railway Infrastructure,
2020
Dynamical Systems and Risk Laboratory, School of Mechanical and Materials Engineering, University College Dublin
Instrumented Trains As A Probe For Structural Health Monitoring Of Railway Infrastructure, Vikram Pakrashi, Claire Mcgeown, Rohit Chawla, David Hester, Alexandra Micu, Eugene O'Brien
Civil Engineering Research in Ireland 2020
Railway infrastructure throughout the world is degrading and the Structural Health Monitoring (SHM) of this infrastructure can be effective. As a part of INTERREG project SIRMA, it is being investigated in instrumented trains can be used as a moving sensor for SHM of bridges and rail lines. Off-the-shelf calibrated sensors will be connected to trains and the instrumentation regime will be decided based on each SHM need. Output-only algorithms for anomaly detection and system identification will be implemented. Damage Sensitive Features (DSF) will be investigated to assess the best markers for the proposed SHM. A combined set of instrumentation and …
Implementation Of A Low-Cost Rtk Positioning System For Drone-Assisted Structural Inspections,
2020
Department of Civil Engineering, National University of Ireland Galway, Galway, Ireland
Implementation Of A Low-Cost Rtk Positioning System For Drone-Assisted Structural Inspections, Aidan Keaveney, Patrick Mcgetrick
Civil Engineering Research in Ireland 2020
Technological developments of unmanned aerial vehicles (UAVs) have been rapid and significant in recent years, and thus the scope of use has increased across a broad spectrum of industries, including the fields of structural and civil engineering. A key part of structural engineering is ensuring that a structure can be inspected during its service life to determine if there is any defect that could diminish its structural integrity. In practice, the procedures involved in such inspections to locate defects can be dangerous, time consuming and expensive to conduct. The aim of this study is to establish a system that is …
Developing A Common Framework For A Bridge Management System At National Level,
2020
Department for Infrastructure, Belfast, Northern Ireland
Developing A Common Framework For A Bridge Management System At National Level, Thomas Neeson, Myra Lydon, Kristopher Campbell, Nicola Ann Stevens, Adelle Marshall, Aleksander Novakovic
Civil Engineering Research in Ireland 2020
Transport infrastructure is directly impacted by climate change as extreme weather conditions account for 10-35% of delays/service interruptions to road and rail infrastructure. The current reactive method of maintaining bridges within these infrastructure systems results in a lack of contingency capacity and ultimately a reduced ability to adapt to uncertain future needs. To allow infrastructure providers to prepare for future events, there is a need to develop asset management systems (AMS) with embedded decision-making support which considers factors such as climate change and population growth. A National approach would enable strategic risk assessment to mitigate the consequences of climate change …
Conversion Of Legacy Inspection Data To Bridge Condition Index (Bci) To Establish Baseline Deterioration Condition History For Predictive Maintenance Models.,
2020
School of Natural and Built Environment, Queens University, Belfast
Conversion Of Legacy Inspection Data To Bridge Condition Index (Bci) To Establish Baseline Deterioration Condition History For Predictive Maintenance Models., Nicola Ann Stevens, Myra Lydon, Kristopher Campbell, Thomas Neeson, Adelle Marshall, S. E. Taylor
Civil Engineering Research in Ireland 2020
Bridge Management Systems (BMS) have been introduced across the world with the goal of aiding the decisions regarding maintenance, rehabilitation and replacement (MR&R) of bridges. Deterioration modelling is the most important part of the BMS because the ability to predict the future condition is vital as it will determine the quality of the decisions made. Markovian-based models are the most common predictive maintenance tool utilised in existing BMS, by obtaining probabilities of transition of bridge condition from one state to another based on historic bridge inspection data. Prior to the introduction of the Bridge Condition Index (BCI) the use of …
A Review Of The Data Held On 3,437 Masonry Arch Bridges In Northern Ireland,
2020
Department for Infrastructure, Belfast, Northern Ireland
A Review Of The Data Held On 3,437 Masonry Arch Bridges In Northern Ireland, Kristopher Campbell, Nicola Ann Stevens, Myra Lydon, Thomas Neeson, Su Taylor, Alan O'Connor
Civil Engineering Research in Ireland 2020
Queens University of Belfast and the Department for Infrastructure (DfI), who are the local road authority in Northern Ireland, have undertaken a joint project to develop a new bridge management system to cover the inspection and maintenance of DfI bridges and associated structures. An initial review of the asset data held by DfI, including bridge properties and current and legacy inspection data has been undertaken for the entire network. This paper primarily focuses on 3,437 masonry arch bridges which make up nearly 53% of the total bridge stock in NI. It presents data which has been classified into groups in …
Caha Tunnel Rock Repairs And Improvements Including Non-Destructive Testing,
2020
RPS Group Ltd., Innishmore, Ballincollig, Cork, Ireland
Caha Tunnel Rock Repairs And Improvements Including Non-Destructive Testing, Roy Costello, Liam Duffy
Civil Engineering Research in Ireland 2020
This paper describes Caha Tunnel, a 180m long rock tunnel of siltstone and sandstone formation located along the N71 between Kenmare, Co. Kerry and Glengarriff Co. Cork. The tunnel was formed in the mid-19th century through blasting methods, thus giving it its inhomogeneous cross-sectional shape throughout and exposing the natural face of the rock. In recent years there has been numerous reports of rock falls within the tunnel which is causing uncertainty of the safety of the tunnel amongst road users. Calls for rehabilitation works are sought amongst the public to ensure the long-term safety of the tunnel is provided …
Hydraulics Of Scour In The Vicinity Of A Flexiarch Bridge,
2020
School of Natural and Built Environment, Queen's University Belfas
Hydraulics Of Scour In The Vicinity Of A Flexiarch Bridge, Prabuddha Sathurusinghe, Gerard Hamill, Su Taylor, Desmond Robinson
Civil Engineering Research in Ireland 2020
Floods and scour are major causes of failure of bridges and with the increase in short-duration and high intensity rainfall events the occurrence of such failures is increasing. While standard free flow scour at bridge piers is an extensively researched area, the increased scour that occurs when the upstream water level is at or above the crown of an arch bridge (pressure-flow scour) is comparatively less well studied. As the frequency and magnitudes of floods increase, more bridges may be at a higher risk of being subject to pressure-flow scour. A modern masonry arch bridge system called the ‘FlexiArch’, that …
Full-Scale Structural Testing Of Wind And Tidal Turbine Blades,
2020
Civil Engineering, School of Engineering, National University of Ireland Galway, Ireland; MaREI Research Centre for Energy, Climate and Marine, Ryan Institute, National University of Ireland Galway, Galway, Ireland
Full-Scale Structural Testing Of Wind And Tidal Turbine Blades, William Finnegan, Patrick Meier, Yadong Jiang, Afrooz Kazemi Vanhari, Edward Fagan, Le Chi Hung, Jamie Goggins
Civil Engineering Research in Ireland 2020
In recent years wind energy has been established as a leading source of renewable energy and, now, tidal energy is nearing commercial viability. In both cases, the reliability and longevity of certain key components of energy converters is paramount. The blades of these turbines are such key components. The turbine blades convert the energy of the resource into mechanical energy, encountering high variations in loading. In order to ensure that tidal turbine blades have the required structural capacity, mechanical static and fatigue testing of the blades is performed. This study examines the performance of wind and turbine blades as they …
A Novel Solution For Preventing Leading Edge Erosion In Wind Turbine Blades,
2020
Civil Engineering, School of Engineering, National University of Ireland Galway, Ireland; MaREI Research Centre for Energy, Climate and Marine, Ryan Institute, National University of Ireland Galway, Galway, Ireland
A Novel Solution For Preventing Leading Edge Erosion In Wind Turbine Blades, William Finnegan, Michael Flanagan, Róisín Ó Coistealbha, Priya Dasan Keeryadath, Tomas Flanagan, Jamie Goggins
Civil Engineering Research in Ireland 2020
As the world shifts to using renewable sources of energy, wind energy has been established as one of the leading forms of renewable energy. However, as wind turbines get increasingly larger, new challenges within the design, manufacture and operation of the turbine are presented. One such challenge is leading edge erosion on wind turbine blades. With larger wind turbine blades, tip speed begin to reach over 500 km per hour. As water droplets impact along the leading edge of the blade, rain erosion begins to occur, increasing maintenance costs and reducing the design life of the blade. In response to …
Equivalent Load Profile Development For Fatigue Testing Of A 13-Metre Wind Turbine Blade,
2020
Civil Engineering, School of Engineering, National University of Ireland Galway, Ireland; MaREI Research Centre for Energy, Climate and Marine, Ryan Institute, National University of Ireland Galway, Galway, Ireland
Equivalent Load Profile Development For Fatigue Testing Of A 13-Metre Wind Turbine Blade, Afrooz Kazemi Vanhari, Edward Fagan, Yadong Jiang, Patrick Meier, William Finnegan, Jamie Goggins
Civil Engineering Research in Ireland 2020
As blades are a key component of wind turbines, blade manufacturers are required to carry out static and fatigue tests of full-scale blades as part of the certification process prior to their deployment for commercial use. A 13-meter turbine blade is existing in the Large Structure Research Laboratory located in the Alice Perry Engineering Building, NUI Galway. We are going to test the blade (static and fatigue) in both the edgewise and flatwise directions. The blade is constructed from a novel glass-fibre reinforced powder epoxy composite material and consists of a double internal shear web. The blade is supported at …
Natural Frequency Measurement Of A 13-Meter Wind Turbine Blade Using Different Techniques,
2020
School of Engineering, National University of Ireland, Galway;Ryan Institute, National University of Ireland, Galway; SFI MaREI Centre for Energy, Climate and Marine, Environmental Research Institute, University College Cork, Cork, Ireland
Natural Frequency Measurement Of A 13-Meter Wind Turbine Blade Using Different Techniques, Yadong Jiang, William Finnegan, Afrooz Kazemi Vanhari, Patrick Meier, Edward Fagan, Jamie Goggins
Civil Engineering Research in Ireland 2020
Nowadays the wind energy markets continue to grow to accommodate the current demands of renewable energy. As the wind turbine blades are susceptible to suffer damage from complex and irregular loading caused by catastrophes, development of quick and reliable ways for wind turbine health monitoring is becoming crucial. Natural frequency testing is one of the most commonly used non-destructive health monitoring methods, as any damages could lead to changes in the structural vibration characteristics. In this paper, a series of tests were carried out to measure the natural frequencies of a 13 m wind turbine blade. Various testing techniques and …
Static And Fatigue Testing Of A Full Scale Helical River Turbine Foil,
2020
Civil Engineering, School of Engineering, National University of Ireland Galway, Ireland; MaREI Research Centre for Energy, Climate and Marine, Ryan Institute, National University of Ireland Galway, Galway, Ireland
Static And Fatigue Testing Of A Full Scale Helical River Turbine Foil, Patrick Meier, William Finnegan, Patrick Cronin, James Donegan, Matthew Barrington, Le Chi Hung, Jamie Goggins
Civil Engineering Research in Ireland 2020
Despite opposition from some sectors, the imminent impact of increased hydrocarbon emissions on climate is generally accepted. Alternative energies from as many different sources must be exploited, in order to reduce the dominating market share of fossil fuels on the global energy budget. One such potential source is the capture of hydro-mechanical energy harnessed from river or tidal flows. The former is a mature industry in the case of large permanent hydroelectric plants, but smaller mobile, moored systems are of special interest in remote locations where grid connection is less widespread. Since servicing of these remote installations becomes costly, the …
Impact Of Occupant Behaviour On Indoor Environment Of A-Rated Dwellings,
2020
Department of Civil, Structural and Environmental Engineering, Trinity College, College Green, Dublin 2
Impact Of Occupant Behaviour On Indoor Environment Of A-Rated Dwellings, Niti Saini, Patrick Shiel, Roger P. West, Ruth Kerrigan, Ian Pyburn
Civil Engineering Research in Ireland 2020
An increase in energy efficiency and airtightness in the absence of adequate ventilation in A-rated houses has brought about an increase in indoor environment quality (IEQ) issues which can lead to health hazards, such as mould formation due to high humidity levels, or the sustained presence of Carbon Dioxide, both generated by human activities. Relative humidity above 80% for prolonged periods can result in mould growth on any cold unventilated surfaces, such as behind curtains, blinds, wardrobes, etc. Levels of humidity can also affect an occupant’s feeling of well-being, for example, low levels of humidity can lead to drying of …
Characterization And Performance Of Cement-Based Thermoelectric Materials,
2020
School of Civil and Structural Engineering, Technological University Dublin, Ireland
Characterization And Performance Of Cement-Based Thermoelectric Materials, Ruchita Jani, Niall Holmes, Roger P. West, Kevin Gaughan, Xiaoli Liu, Esther Orisakwe, Conrad Johnston, Ming Qu, Jorge Kohanoff, Lorenzo Stella, Hongxi Yin
Civil Engineering Research in Ireland 2020
Thermoelectric materials enable direct conversion of thermal energy to electricity. Ambient heat energy harvesting could be an effective route to convert buildings from being energy consumers to energy harvesters, thus making them more sustainable. There exists a relatively stable temperature gradient (storing energy) between the internal and external walls of buildings which can be utilized to generate meaningful energy (that is, electricity) using the thermoelectric principle. This could ultimately help reduce the surface temperatures and energy consumption of buildings, especially in urban areas.
