Construction Engineering and Management Commons^™

Development Of A Readiness Model For The Application Of Precast Concrete In Housing Construction: A Case Study In Myanmar, Aung Phone Myint

Chulalongkorn University Theses and Dissertations (Chula ETD)

Precast concrete construction has been verified that it is one of the solutions for the growth of urbanization and housing development. In addition, it helps to reduce the labor requirement and material wastage in construction. However, the use of precast concrete technology is not still popular and not widely used within the Myanmar housing construction industry. Moreover, there is no readiness assessment model encompassed the readiness of construction industry including major stakeholders who are representatives of the construction industry for accepting the new technology. Therefore, the aim of this study is to develop a readiness model that can assess the …

A Business Success Evaluation Of Market Entry Mode Types In Myanmar Construction, Naw Ruth Po Gay

Chulalongkorn University Theses and Dissertations (Chula ETD)

The optimal entry mode decision and knowing the critical success factors are important for successful international market expansion. However, there are not many studies for developing Asian countries, such as Myanmar. Investors need to know what factors influence entry mode decision and business success. Therefore, the objectives of this study are 1) to identify the factors that influence entry modes decision, 2) to identify the critical success factors of entry modes for business, 3) to identify the significant factors that affect business success. The questionnaire survey using a five-point Likert scale was developed and distributed in Yangon, the commercial city …

Modified Response Spectrum Analysis For Computing Seismic Demands Of Multi-Tower Building Sharing A Common Podium, Tarek Youssef

Chulalongkorn University Theses and Dissertations (Chula ETD)

To design irregular tall buildings, performance-based design (PBD) approach, which requires nonlinear response history analysis (NLRHA), is the most accurate method. However, PBD approach is not always used in the current design practice because of its complexity, and as allowed in ASCE 7-16, design engineer can use code-based approach such as response spectrum analysis (RSA) procedure. This paper aims to investigate the accuracy of RSA procedure when applied to irregular tall buildings, and in particular for multi-tower buildings sharing a common podium. Also, a modified response spectrum analysis (MRSA) procedure previously proposed for computing shear demand in regular tall buildings, …

Fundamental Solutions Of Multi-Layer Elastic Media With Couple Stress Theory, Wipavee Wongviboonsin

Chulalongkorn University Theses and Dissertations (Chula ETD)

This thesis presents fundamental solutions of a two-dimensional, elastic, multi-layered medium under surface loadings by taking the influence of material micro-structure into account. An underlying mathematical model for simulating such small-scale influence is established within the continuum-based framework via the well-known couple stress theory. For each material layer, the generalized Navier’s equation governing the displacement field is established and the method of Fourier integral transform is applied to derive its general solution in a transformed space. A set of boundary conditions and the continuity of fields along the material interfaces are enforced to obtain a system of linear algebraic equations …

Costs And Benefits Of Flood Mitigation In Louisiana, Arash Taghi Nezhad Bilandi

LSU Doctoral Dissertations

Assessing the costs and benefits of hazard mitigation efforts is an essential component of disaster management, planning, and resilience assessment. These calculations are particularly important in locations vulnerable to multiple hazards with high frequencies, such as coastal Louisiana. This study aims to provide an improved understanding of the costs and benefits of flood mitigation efforts in Louisiana funded by federal government grants between 2005 and 2015. Project data provided by the Governor’s Office of Homeland Security and Emergency Preparedness (GOHSEP) were summarized and missing values were imputed using robust statistical approaches. Elevation project cost was investigated for prediction by statistical …

Optimal Placement Of Distributed Energy Storage Systems In Distribution Networks Using Artificial Bee Colony Algorithm, Choton K. Das, Octavian Bass, Ganesh Kothapalli, Thair S. Mahmoud, Daryoush Habibi

Research outputs 2014 to 2021

The deployment of utility-scale energy storage systems (ESSs) can be a significant avenue for improving the performance of distribution networks. An optimally placed ESS can reduce power losses and line loading, mitigate peak network demand, improve voltage profile, and in some cases contribute to the network fault level diagnosis. This paper proposes a strategy for optimal placement of distributed ESSs in distribution networks to minimize voltage deviation, line loading, and power losses. The optimal placement of distributed ESSs is investigated in a medium voltage IEEE-33 bus distribution system, which is influenced by a high penetration of renewable (solar and wind) …

Solar & Rain Catching Canopy "Urban Oasis 2", Afolabi Ibitoye, Cheriyah Wilmot, Alexander Aptekar, Grzegorz Kosieradzki, Kaiyrgul Sultanova, Jude Vallon

Publications and Research

The accumulation of water runoff during rain storms is a major problem in New York City’s combination water systems, forcing water treatment plants to release untreated excess water. To avoid overfilling of the sewer system by this grey water, pocket parks and gardens will be used to absorb the excess rainfall. We will be harnessing nature’s resources with current technologies such as: solar panels combined with rain catching canopies, to beautify the environment, educate the public about sustainability, stimulate growth to local businesses through increased foot traffic and bringing social awareness on environmental issues.

The canopies are designed to collect …

Fatigue Performance And Shear Demand Distributions Of Clustered Shear Connectors In Composite Bridge Girders, Brian David Hillhouse

Graduate Theses and Dissertations

The current American Association of State Highway and Transportation Officials (AASHTO) Bridge Specifications assumes uniform shear flow demands at the steel-concrete interface of composite bridge girders. As stud pitch increases to beyond 24 in or as studs become clustered to account for pre-cast concrete decks, this assumed shear demand distribution may be unrepresentative. Understanding shear transfer and resulting demands on headed studs in composite beams are important for ensuring adequate composite design. This study investigates stud demands in composite bridge girders using large-scale fatigue testing and direct pressure measurements for stud force calculations. In this study, two large-scale composite beam …

Improving Ductility Of Slender Reinforced Concrete Shear Walls With Frp Sheets And Splay Anchors, Luke M. Ostrom

Architectural Engineering

The Sylmar earthquake of 1971 caused significant damage to slender, non-ductile reinforced concrete (RC) shear wall buildings in California. A later survey by the Concrete Coalition in 2011, under the guidance of EERI members, indicated that there are over 3000 vulnerable concrete buildings in California [8]. This led to City of Los Angeles (LA) Ordinance 193893 enacted in 2015, which requires mandatory upgrades to these concrete buildings by 2035. Current practice to meet the requirements of this ordinance, with respect to RC wall buildings, involves adding new shear walls to the building plan or increasing the cross-sectional area of existing …

Unexpected Setbacks When Excavating – Using Gpr For Mitigating Risk: A Case Study, Samuel L. Marcum

Construction Management

Whether constructing on undeveloped land or on an existing developed site, there is a risk of encountering unexpected objects when excavating. With today’s technology in Ground Penetrating Radar (GPR), this risk can generally be mitigated. Using Whiting-Turner’s construction of Stanford University’s new ChEM-H & SNI Building as an example, this case study discusses the use of GPR for underground mapping, as well as various ways to implement GPR technology. The ChEM-H & SNI site had many underground utilities that required precise pot-holing to verify locations. Although pot-holing is widely used, it is a destructive method, it is time and labor …

A Study Of Career Path Interest Amongst Cm Students At Cal Poly San Luis Obispo, Travis J. Tollstrup

Construction Management

With the labor shortage being experienced in the modern construction industry, it is important that office and field management personnel stay balanced to support the gap in skilled labor. However, for the students of Cal Poly San Luis Obispo, there is a trend that students are more interested in pursuing a career path in Office management, specifically that of a Project Manager. This paper determined the lack of interest in field management career path choice, specifically that of a Superintendent, by surveying the Junior and Senior students to gauge their career interests. It is concluded that there is indeed a …

Scraper Productivity, Cost, And Size Selection Generator, Zachary C. Rege

Construction Management

In the construction industry we are timelessly looking to increase productivity and find the most cost-efficient way to finish a given project. Like any other sector of the construction industry large earthmoving contractors looks to find the most advantageous way to move dirt and at the cheapest cost per cubic yard. To obtain this goal of calculating and imagining the best way to move dirt, I have created a prototype program that analyzes scraper productivity and cost comparisons through excel sheets. These excel sheets allow a contractor to enter information such as cycles times, load calculations, and costs to create …

A Study Of Cal Poly Students' Preferred Career Path: A Focus On Alumni, Jesse D. Longchamps

Construction Management

The construction industry is a fragile system with an intricate mix of field and office – labor and management. Theses two branches are critical to keeping any project running smoothly. However, the industry is noticeably changing and this fragile structure is deteriorating. Field positions are getting tougher and tougher to fill for most companies in the construction industry. Without skilled field employees, the companies are losing one of the two most important aspects of construction. Without field employees, office employees may be tasked with picking up additional duties beyond their expertise – further advancing their stress levels and sacrificing quality …

Hard Hat Safety By California Contractors, Jonathan G. Hernandez

Construction Management

The hard hat is the quintessential item of PPE, and yet it often gets overlooked when ensuring safety standards are being met. We all expect our hard hat to protect us, but many never inspect it to ensure that it is properly fulfilling its purpose. This disregard to inspection and maintenance can lead to serious injury or death in the event of an accident. While organizations such as OSHA and the hard hat manufacturers themselves post information on this topic, it is unclear if this information is actually being received by the people involved in a construction project. This research …

Scraper Productivity, Cost, And Size Selection Generator, Zach Rege

Construction Management

In the construction industry we are timelessly looking to increase productivity and find the most cost-efficient way to finish a given project. Like any other sector of the construction industry large earth moving contractors look to find the most advantageous way to move dirt and at the cheapest cost per cubic yard. To obtain this goal of calculating and imagining the best way to move dirt, I have created a prototype program that analyzes scraper productivity and cost comparisons through excel sheets. These excel sheets allow a contractor to enter information such as cycles times, load calculations, and costs to …

Solar Parking Lot Analysis: Smart Investment Or Waste Of Capital, Jared James Davis

Construction Management

In the last couple decades solar panels have been developed into a sustainable and effective method for harnessing clean energy. Today, solar panels have been engineered into solar roadways. Solar roadways are structurally engineered solar panels which can be installed in the Earth, driven on, and can replace the need for traditional asphalt roads. These solar roadways also include built in LEDs which mimic road lines and light up wildlife crossing the road, making these road panels a very safe alternative to traditional asphalt roads. This senior project is an analysis of solar roadways and their capabilities when applied to …

A Comparative Analysis Of Regional Productivity Trends, Michael P. Foley

Construction Management

Throughout recent decades, the construction industry has suffered considerably from its inability to accurately target and measure key aspects of worker output that hinder productivity most. Much research has been conducted to analyze the factors contributing to labor productivity output at the work face, however, this dissertation is primarily focused on discovering key components of the building process that seem to hinder productivity from the perspective of the general contracting team. This paper’s literature review looks to address historical data relating to productivity difficulties specific to the construction industry, laborers’ productivity dilemma at the work face, and the resulting impact …

Meetings Critical To Construction Project Success And Best Practices: A Case Study, Ross L. Ludwig

Construction Management

This project is a case study of specific meeting tactics that are being used by “Company X”, a large general contracting company. The case study was completed by conducting semi-structured interviews of “Company X” senior management personnel. The case study looked to discover which meetings were necessary to overall project success, as well as best practices for meetings in the construction industry. Communication effectiveness of the project team is essential to the overall project outcome. The project team is a group of people with diverse backgrounds. Understanding the dynamics of a group is necessary to producing a quality product. A …

Bridging The Gap: 3d Modeling To Hands On Learning, Tyler J. Hecht

Construction Management

This project is a rework of Cal Poly Construction Management Building Information Modeling class, Revit Activity. The goal of the assignment is to teach the fundamentals and concepts of Autodesk Revit, and the tools that can be used within the construction industry. The model itself is based upon a hands-on lab that the Commercial Construction class builds. The modeling exercise allows students to model several key elements of a building, following a construction sequence. Following the modeling, the students will be able to create sheets and create their own plan set that was modeled. On those plan sets they will …

Virtual Reality And Its Applications In The Mockup Process: A Case Study, David B. Friend

Construction Management

Mockups are an important part of the construction process as they provide numerous benefits in both constructability review and aesthetic approval. Virtual Reality is an emerging technology that could prove to be a valuable addition to the mockup process. Many construction firms are attempting to incorporate virtual reality into any process they can --ranging from impressing owners in order to procure jobs to training employees so they can more adeptly adjust to field conditions. This paper will introduce virtual reality and some of its applications in the construction industry, specifically analyzing virtual reality and its applications in the mockup process …