Construction Engineering and Management Commons^™

Residential Dwelling Design And Construction Planning, Jodi Beery

Williams Honors College, Honors Research Projects

This report presents a step-by-step guide in building a hypothetical residential dwelling in Wayne County, Ohio. The project begins with the initial site investigation phase, which gathers general information about the physical site of proposed construction as well as the requirements of the governing body of the area; applications for permits and inspections for example. Next, phase is the site design which includes creating plans for the building footprint, pavement areas, and utility locations. The next phase in the design will be the building plans which will include floor plans and associated material lists for the construction of the home. …

Dynamic Pricing In Electric Power Markets Affected By Distributed Energy Generation Using Agent-Based Modeling, Gasser G. Ali, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The power infrastructure in the US is facing many challenges concerning capacity, reliability, and sustainability. Some of those challenges are associated with the integration of distributed energy resources (DER) into the conventional grid system. DER may offer reliable and cost-effective distributed small-scale generation near or at end-consumers. However, it also creates new challenges for utilities and generating companies due to the uncertainties in estimating demands. Accordingly, the goal of this research is to investigate dynamic pricing in electric power markets considering the effect of the increasing penetration of DER. To achieve that goal, a complex system-of-systems model that combines agent-based …

Identifying Interconnectivities Between Modular Construction Decision-Making Factors Using Clustering And Network Analysis, Mohamad Abdul Nabi, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Understanding the complex and unique requirements of modular construction methods has become crucial given the ongoing increase in popularity of such construction methods. In fact, studying the various modular construction factors and their interconnections to attain successful project performance is perceived to help practitioners choose the modularization strategies that are more suitable for their specific context. To this end, there is a need to better understand the interconnectivities among the various modular construction decision-making factors. As such, the paper aims to enhance the knowledge of the interactions and interdependencies among the various modular construction decision-making factors. To achieve that, the …

Identifying Substantial Changes For Aip Projects Using Rf And Svm, Ramy Khalef, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The budget for the Airport Improvement Program (AIP) in FY21 is $3.35 billion. AIP's contractual guidelines and policies are outlined in Federal Aviation Administration (FAA) 5100.38D. Substantial contractual changes within AIP projects are likely to create risks that can greatly impact cost, time, and quality. To implement improved change management, identification and evaluation of contractual change are essential. Thus, there is a need to create an automated model to identify and evaluate contractual changes in AIP projects. This paper fills this knowledge gap. Using 876 contractual changes made to FAA 5100.38D, the authors utilized an interrelated multi-step methodology. Firstly, the …

Smart And Emerging Technologies: Shaping The Future Of The Industry And Offsite Construction, Rayan H. Assaad, Islam H. El-Adaway, Makarand Hastak, Kim La Scola Needy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The interest in smart, emerging technologies and offsite construction methods continues to grow. While previous studies investigated different offsite construction aspects, there is still lack of research work that explored the current and future use of smart and emerging technologies, especially those used in offsite construction. This study addresses this knowledge gap through a multi-step research methodology. First, a list of 24 technologies was identified. Second, a survey was distributed to study the current use and the experts' future perceptions of the identified technologies in offsite construction. Third, descriptive statistics and computational clustering analysis were used to quantify and classify …

A Critical Analysis Of The Application Of Visual Programming To Increase Efficiency In Bim Object Metadata Delivery Workflows During The Delivery Phase Of An Asset, Kieran Lakhera O'Shea, Davitt Lamon

Reports

Uniclass 2015 data generally seems to be overlooked in favour of the more valuable COBie data when discussion begins about BIM model metadata and, at present, few studies are devoted to it and its delivery through automated methodologies. Classification is a key part of the BIM process – without the ability to distinguish one object from another a BIM model lacks the definition required for implementing downstream applications such as functional simulations, compliance checking and other automated technologies. The use of classification data is, of course, not the only way of identifying objects but it is currently the only standardised …

A Critical Analysis Of How Large Irish Architectural Practices Responded To Initial Covid-19 Restrictions And The Affect Implementing Remote Working Had On Bim Processes, Policies, And People, Bim Tudublin, John Mcenroy

Capstone Reports

The unprecedent events which transpired in the 88-day period from the 31st of December 2019 to the 27th of March 2020 have changed the world in which we live and work. The outbreak of Coronavirus disease 19 (COVID-19) and the ensuing pandemic which has evolved are descripted as one in a hundred-year events. This paper researched and critically analyses the operations which large Irish Architecture firms initiated during this period in order to facilitate the ability of its employees working from a remote location, focusing on how the People, Processes and Policies of BIM (3 Ps of BIM); adapted to …

To What Extent Can Lean Construction Processes And Principles Be Utilised In The Design Stage Of A Bim Project In The Irish Design And Construction Industry, Bim Tudublin, Barry Sheramn

Capstone Reports

Although different in many ways, Building Information Modelling (BIM) and Lean Construction are two processes that are having a significant impact on the Design & Construction Industry. In recent years, the Irish AECO industry has seen a tenfold increase across numerous construction disciplines with the adoption of new workflows and processes centred around both BIM and Lean methodologies. Existing literature identifies a strong synergistic relationship between the two processes and highlights the opportunity for Lean processes and principles to be implemented into the design stage workflow. This paper investigated existing literature relating to several lean processes currently implemented in the …

An Examination Of The Use Of Geotechnical Bim To Provide Value Engineering Solutions For Coastal Infrastructure., Bim Tudublin, Eric Brennan

Capstone Reports

The digitisation of construction is taking root as Building Information Modelling is becoming more prevalent across the industry. From an Irish context, the adoption rate of BIM has been slow; nationally its advantages and merits have been welcomed and the appropriate government support is either available, soon to be implemented or in the early conceptual stage. Within the Irish governments Project Ireland 2040 framework there are significant infrastructure developments looming ahead, in particular regarding ports and harbours. The importance of this type of infrastructure is only further compounded due to the UK’s departure from the EU and the need for …

A Framework For Achieving Sustainability By Overcoming The Challenges Of The Construction Supply Chain During The Design Process, Ayman Ahmed Ezzat Othman, Nooran Alnassar

Architectural Engineering

This paper aims to develop a framework to achieve sustainability by overcoming the challenges of the construction supply chain (CCSC) during the design process. To achieve this, two approaches, namely theoretical and practical, were used to accomplish four objectives. For the theoretical approach, based on literature review and case studies, the objective used was to identify, classify and validate the challenges that the construction supply chain (CSC) encounter. For the practical approach, a survey questionnaire was employed to quantify the CCSC and investigate the perception of architectural design firms (ADFs) in Egypt towards achieving sustainability by overcoming the CCSC during …

A Simulation Model For Optimal Bidding Decisions, Rayan H. Assaad, Muaz O. Ahmed, Islam H. El-Adaway, Amr Elsayegh

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The lowest bid approach is the most used technique in the US construction procurement environment since competitive bidding is a legal requirement in the public sector. Despite that many research studies were directed to help contractors in taking different bidding decisions, there is still insufficient research efforts that equipped contractors with decision-support tools to decide on optimal bid values. Hence, this paper takes previous research works a step further by developing a simulation model that can be adopted to determine the bid decision that would result in winning more projects. To this end, a methodology composed of multiple steps was …

Building Services Engineering January/February

Building Services Engineering

No abstract provided.

Analytical Assessment Of Project Complexity: A Guide To Managing Projects Through Reduction Of Complexity, Christopher Vanarsdale

Dissertations, Master's Theses and Master's Reports

This research discusses the characteristics that make projects difficult to manage. Project inefficiencies and failures can be attributed to the structure of a system. Developing a measurement for complexity based on the number and nature of interactions in the system can allow project complexity to be reduced while still meeting project objectives. Previous research has identified characteristics or markers of complex systems but does not address how to measure or how to reduce a system’s complexity.

The objective of this dissertation is to develop a metric for complexity that assists project and emergency managers in reducing project complexity either by …

การใช้วัสดุเหลือใช้จากอุตสาหกรรมแกรนิตในคอนกรีต กระตุ้นด้วยสารละลายด่างเสริมเส้นใยเหล็ก, พลยุทธ ทองผาสุก

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้มีวัตถุประสงค์เพื่อศึกษาอิทธิพลของเศษหินแกรนิตและเส้นใยเหล็กต่อสมบัติเชิงกลของคอนกรีตที่กระตุ้นด้วยสารละลายด่างภายใต้อุณหภูมิปกติและอุณหภูมิสูง มวลรวมรีไซเคิลจากเศษหินแกรนิตถูกนำมาใช้แทนที่ทรายธรรมชาติในปริมาณร้อยละ 0 และ 100 โดยน้ำหนัก และมีการเสริมกำลังของวัสดุด้วยเส้นใยเหล็กในปริมาณร้อยละ 0, 1, และ 2 โดยปริมาตรของคอนกรีต ผลการทดสอบพบว่าค่าการไหลแผ่มีค่าลดลงเมื่อแทนที่ด้วยเศษหินแกรนิต เช่นเดียวกับการเพิ่มปริมาณเส้นใยเหล็กส่งผลให้ค่าการไหลแผ่ลดลง ค่ากำลังรับแรงอัดของคอนกรีตที่ใช้เศษหินแกรนิตและทรายธรรมชาติมีค่าใกล้เคียงกันในทุกอายุการบ่ม (7, 28 และ 90 วัน) และเมื่อเพิ่มปริมาณเส้นใยเหล็กส่งผลให้ค่ากำลังอัด กำลังรับแรงดัด และความเหนียวของวัสดุมีค่าเพิ่มขึ้นตามปริมาณเส้นใยเหล็ก โดยกำลังอัด กำลังรับแรงดัด และความเหนียวมีค่าสูงที่สุดเมื่อใช้ปริมาณเส้นใยเหล็กร้อยละ 2 โดยปริมาตรของคอนกรีต สำหรับการทดสอบหลังเผาไฟ 60 นาที พบว่า ค่ากำลังรับแรงอัดคงค้างของคอนกรีตที่ใช้มวลรวมเศษหินแกรนิตมีค่าใกล้เคียงกับคอนกรีตที่ใช้ทรายธรรมชาติ ในขณะที่กำลังรับแรงดัดของคอนกรีตที่ใช้มวลรวมเศษหินแกรนิตมีค่ามากกว่าคอนกรีตที่ใช้ทรายธรรมชาติ นอกจากนี้การเสริมเส้นใยยังช่วยเพิ่มกำลังอัดและกำลังดัดคงค้างหลังเผาไฟของคอนกรีตได้

Bond Behavior Between Concrete And Embedded Through-Section Gfrp Bars, Nakares Kongmalai

Chulalongkorn University Theses and Dissertations (Chula ETD)

There are many technologies and methods for strengthening and enhancing the performance of deteriorated reinforced concrete structures. The embedded through-section (ETS) is one of the significant techniques for shear strengthening using glass fiber reinforced polymer (GFRP) bars. This study aims to investigate the bond behavior between ETS bars and concrete interfaces. A series of 36 pullout test specimens was conducted to analyze the bond mechanism between ETS bars and concrete. The tested parameters consisted of concrete compressive strength, bar diameter, embedment length, concrete covering, and nut anchorage. The result shows that the increase in concrete compressive strength enhanced the average …

การพัฒนาระบบอัตโนมัติเพื่อตรวจสอบคุณภาพงานผนังฉาบเรียบโดยใช้ข้อมูลพอยท์คลาวด์, ศักดินนท์ นพฤทธิ์

Chulalongkorn University Theses and Dissertations (Chula ETD)

การตรวจสอบคุณภาพงานผนังในโครงการก่อสร้างอาคารประกอบด้วยรายการที่ใช้ประเมิน วิธีการวัด และเกณฑ์การประเมิน ซึ่งรายการวัดเกี่ยวกับความเรียบอาจใช้เครื่องมือวัดเทียบกับเกณฑ์ หรือการใช้สายตาในการประเมินความเรียบ อย่างไรก็ตามการวัดด้วยเครื่องมือและสายตาส่วนบุคคลอาจใช้เวลาเนื่องจากปริมาณงานก่อสร้างผนังมีจำนวนมาก นอกจากนี้วิธีการตรวจสอบแบบเดิมมีข้อจำกัดด้านสายตาและประสบการณ์ส่วนบุคคลซึ่งไม่สามารถตรวจสอบข้อบกพร่องที่เป็นไปได้ทั้งหมด ปัจจุบันข้อมูลพอยท์คลาวด์ถูกประยุกต์ใช้ในการตรวจสอบความเรียบของผนังเนื่องจากประสิทธิภาพของข้อมูลที่แม่นยำ โดยการวิเคราะห์ข้อมูลพอยท์คลาวด์ด้วยเฉดสีเพื่อจำแนกมิติความเรียบของผนังมีหลายขั้นตอนทำให้ต้องใช้เวลา นอกจากนี้เกณฑ์การตรวจสอบผนังด้วยภาพแสดงเฉดสีอาจมีข้อจำกัดในการประเมินข้อบกพร่อง เนื่องจากภาพอาจมีความหนาแน่นของจุดต่างกันทำให้การวิเคราะห์บริเวณขอบเขตที่ต้องแก้ไขขาดความชัดเจน งานวิจัยนี้พัฒนาระบบอัตโนมัติสำหรับวิเคราะห์ข้อมูลพอยท์คลาวด์เพื่อตรวจสอบข้อบกพร่องด้านความเรียบของผนัง ระบบนี้ได้รับการพัฒนาโดยการเขียนโปรแกรมบน MATLAB เพื่อวิเคราะห์ข้อมูลพอยท์คลาวด์ และนำเสนอแนวคิดในการพัฒนาเกณฑ์การประเมินเพื่อเป็นมาตรฐานสำหรับการประเมินข้อบกพร่องด้านความเรียบแบบอัตโนมัติโดยใช้ตรรกศาสตร์คลุมเครือ งานวิจัยนี้พัฒนาและทดสอบแนวคิดด้วยการเปรียบเทียบข้อมูลการตรวจสอบคุณภาพที่หน้างานจริงกับระบบตรวจสอบที่นำเสนอ ผลการทดสอบพบว่าระบบประเมินอัตโนมัติสามารถตรวจสอบข้อบกพร่องด้านความเรียบของผนังโดยการแสดงเฉดสีทั้งบริเวณผิวผนังที่นูนและยุบอย่างชัดเจน นอกจากนี้แนวคิดในการพัฒนาเกณฑ์เพื่อประเมินความเรียบโดยใช้ตรรกศาสตร์คลุมเครือ ช่วยสนับสนุนระบบการตรวจประเมินความเรียบของผนังแบบอัตโนมัติ โดยลดการตัดสินใจส่วนบุคคลของมนุษย์ที่เกี่ยวกับข้อบกพร่องด้านความเรียบของผนัง อย่างไรก็ตามการพัฒนาระบบควรเก็บข้อมูลกรณีศึกษาเพิ่มเติมเพื่อช่วยให้ระบบมีความน่าเชื่อถือมากขึ้น

Shear Behavior Of Reinforced Concrete Beams Strengthened By Gfrp Bars Using Embedded Through-Section Method, Chanakan Klippathum

Chulalongkorn University Theses and Dissertations (Chula ETD)

Embedded through-section (ETS) technique is one of the interesting strengthening techniques which have been developed to enhance the shear carrying capacity of reinforced concrete (RC) structures. The purpose of this research is to investigate the shear behavior of RC beams strengthened by ETS method using glass fiber reinforced polymer (GFRP) bar. Ten RC beams were subjected to three-point loading test. The efficiency of several parameters was investigated including the shear span to effective depth (a/d) ratio (2.4, 3.6 and 4.8), compressive strength of concrete (27 MPa and 43 MPa), and mechanical anchorage, i.e., presence of anchorage, types of anchorages (steel …

A Bibliometric Analysis Of Global Research On Green Building Rating Tools., Janhavi Kailas Mahale Ms, Kanchan C. Khare Dr

Library Philosophy and Practice (e-journal)

The movement of green buildings started all over the world after the development of different rating tools for the assessment of green buildings. In the present study, the research trends in the area of green building rating tools (GBRTs) were analysed through the Scopus database from the year 2000-2020. By using the different combinations of keywords, relevant articles were found after refining the search results. In this study, 482 relevant articles from the first set of keywords were considered till the period 4^th February 2021 for further analysis. Results reveal that research on GBRTs was majority done only on …

Simulation Of Flexural Performance Of Mill-Cut Steel Fiber Reinforced Concrete Beam Degraded By Mild Corrosion, Minh Khanh Vo

Chulalongkorn University Theses and Dissertations (Chula ETD)

The reinforced concrete structure is widely used for various applications structure due to its many advantages, so it is easily exposed to severe environments and corrosion of steel occurred shortening the life durable of the structure which may cause danger to humans and economic damage. Corrosion occurred as a significant factor leading to the further deterioration of performance and reduction of the loading resistance of reinforced concrete structures. Therefore, durable corroded structures should be dealt with to ensure user safety. In recent decades, steel fiber reinforced concrete is studied and applied cause of provides better durability. Nevertheless, there is a …

Nonlinear Wave Evolution In Interaction With Currents And Viscoleastic Muds, Elham Sharifineyestani, Navid Tahvildari

Civil & Environmental Engineering Faculty Publications

A numerical model is extended to investigate the nonlinear dynamics of surface wave propagation over mud in the presence of currents. A phase-resolving frequency-domain model for wave-current interaction is improved to account for wave modulations due to viscoelastic mud of arbitrary thickness. The model compares well with published laboratory data and performs slightly better than the model with viscous mud-induced wave damping mechanism. Monochromatic and random wave simulations are conducted to examine the combined effect of currents, mud-induced wave dissipation and modulation, and nonlinear wave-wave interactions on surface wave spectra. Results indicate that current effects on wave damping over viscoelastic …