Civil Engineering Commons^™

Buckling Analysis Of Laminated Composite Box Beams, Domagoj Lanc, Goran Turkalj, Josip Brnic

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Sutton, Bobby A. (Fa 946), Manuscripts & Folklife Archives

Folklife Archives Finding Aids

Finding aid only for Folklife Archives Project 946. Paper titled: “History of the Litsey Mill.” Includes information about the Litsey Mill in Washington County, Kentucky, including a description of the workings of the flour mill, terms, implements, map, deeds, and photos.

Montell, William Lynwood, 1931-2023 (Fa 958), Manuscripts & Folklife Archives

Folklife Archives Finding Aids

Finding aid only for Folklife Archives Project 958. Project titled: [Student Collections: Bridges] Includes survey sheets of descriptions of various type of bridges in the counties of Adair, Bourbon, Breathitt, Casey, Clark, Clinton, Cumberland, Green, Hardin, LaRue, Lincoln, Marion, Mercer, Metcalfe, Montgomery, Nelson, Russell, Taylor, Washington in Kentucky, Connecticut, and Ohio. Sheets include a description, informant’s name, terms, and photos of bridges.

Water Resources Systems Analysis Reading Assignments, Marcio Giacomoni

All ECSTATIC Materials

Read these articles:

https://ascelibrary.org/doi/10.1061/%28ASCE%290733-9496%282000%29126%3A3%28118%29

https://ascelibrary.org/doi/10.1061/%28ASCE%290733-9372%281990%29116%3A1%28182%29

https://ascelibrary.org/doi/10.1061/%28ASCE%290733-9496%281986%29112%3A3%28339%29

https://link.springer.com/article/10.1007/s11269-015-0970-6

https://ascelibrary.org/doi/10.1061/%28ASCE%290733-9496%282005%29131%3A6%28441%29

Answer the following questions:

1) Describe in your own words what is the problem that is being addressed? Why is it important?

2) What system is being modeled? Identify the system boundaries, processes, inputs and outputs.

3) How the system is being modeled? Identify the main state variables, parameters, initial conditions and boundary conditions.

4) What is the optimization method used to solve the problem. Describe the method.

5) What are the objective functions, constraints and decision variables?

6) What are the main conclusions and insights generated by the use of optimization? …

Reflecting Societal Values In Designing Flood Risk Management Strategies, Mark Adamson, John O'Sullivan, Zeinab Bedri

Conference papers

In 2006, the Office of Public Works (OPW) began the National Catchment-based Flood Risk Assessment and Management (CFRAM) Programme through a series of pilot studies. A Multi-Criteria Analysis (MCA) Framework was developed through the pilot studies that integrated a number of objectives related to a wide range of potential impacts and benefits into the core of process of appraising and selecting suitable flood risk management measures for a given area or location, and then for prioritising national investments for different schemes and projects. This MCA Framework, that provides a systematic process of developing a non-monetised but numerical indicator of benefit …

Restoring Capacity In Compromised Glued Laminated Beams, Cole Moller

Graduate Theses & Non-Theses

After structural fires are extinguished, presuming the structure is not a total loss, structural wood members can be inspected for residual properties. Through this research, we explored alternative methods aimed at keeping structurally compromised wood member’s in service when they would otherwise warrant replacement. For this study, we used 24F-V8 DF/DF glued laminated beams that had been loaded to their max capacity; both non-fire damaged and fire damaged. In situations where physical and mechanical changes occur, and the beam warrants individual replacement, a new restoration procedure could be used to salvage the member. Salvaging the member could mean to keep …

Evaluation Of Slope Stability Quantifying The Effect Of Vegetation, Roberto José Marín, Juan Pablo Osorio

Conference papers

The present study evaluates the shallow landslides susceptibility triggered by rainfall by means of multiple numerical simulations. The simulations integrate a transient rainfall infiltration model with an infinite slope stability model, both of them developed for unsaturated soils in a basin scale. TRIGRS’ infiltration model is used to calculate pore water pressure. The geotechnical model includes the evaluation of two parameters related to vegetation: root reinforcement and tree surcharge due to the weight of the vegetation. These simulations were carried out using multiple values of these parameters so that their behavior is analyzed for the topographic conditions of the watershed …

Dynamic Elasto-Plastic Behavior Of Steel Building Sub-Assemblage Including Cfrp Retrofitting Under Impact Load, Ali Mohammed Salih Aloosi

Civil & Environmental Engineering Theses & Dissertations

This dissertation presents the outcome of a theoretical and experimental study of the dynamic as well as the quasi-static elasto-plastic behavior of a steel building sub-assemblage including carbon fiber reinforced polymer (CFRP) retrofitting. The steel sub-assemblage consists of a beam-column attached to a pair of beams at its top end while its bottom end is fixed. An apparatus is constructed and used for conducting a series of experiments by applying a lateral impact load on the beam-column in the presence or absence of a static axial load. An innovative procedure for determining the shape of the forcing function caused by …

Efficient Domain Decomposition Algorithms And Applications In Transportation And Structural Engineering, Paul W. Johnson Iii

Civil & Environmental Engineering Theses & Dissertations

Domain decomposition is a divide-and-conquer strategy. In the first part of this dissertation, a new/simple/efficient domain decomposition partitioning algorithm is proposed to break a large domain into smaller sub-domains, in such a way as to minimize the number of system boundary nodes and to balance the work load for each sub-domain. This new domain decomposition algorithm is based on the network’s shortest path solution. Numerical results indicate that the new Shortest Distance Decomposition Algorithm outperformed the most widely used METIS algorithm in 21 out of 27 tested (transportation) examples. In the second part of this dissertation, another new/simple and highly …

Changing Trends In Wave Heights In The U.S. Mid-Atlantic Region, Hillary Lane

Civil & Environmental Engineering Theses & Dissertations

The pace and effects of climate change are an area of constant focus for coastal engineers as evolving patterns in the atmosphere worldwide affect the oceans and coasts on a regional and global scale. Surface waves respond to changing wind patterns both locally and from propagating swell, and the difficulty in predicting future wind patterns is well-established. Expectations that climate change will result in more frequent and intense coastal storms and consequently greater wave heights in the North Atlantic are still unrealized, and recent forecasts from a variety of atmosphere-ocean coupled global climate models instead predict decreasing wave heights through …

High-Affinity Phosphate-Binding Protein (Pbp) For Phosphorous Recovery: Proof Of Concept Using Recombinant Escherichia Coli, Yu Yang, Wendy Ballent, Brooke K. Mayer

Civil and Environmental Engineering Faculty Research and Publications

Phosphorus (P) is a critical, non-renewable nutrient; yet excess discharges can lead to eutrophication and deterioration of water quality. Thus, P removal from water must be coupled with P recovery to achieve sustainable P management. P-specific proteins provide a novel, promising approach to recover P from water. Bacterial phosphate-binding proteins (PBPs) are able to effectively remove phosphate, achieving extremely low levels in water (i.e. 0.015 mg-P L⁻¹). A prerequisite of using PBP for P recovery, however, is not only removal, but also controlled P release, which has not yet been reported. Phosphate release using recombinant PBP-expressing Escherichia coli …

Heat Transfer In Unsaturated Soil With Application To Borehole Thermal Energy Storage, Ali Moradi, Kathleen M. Smits, Ning Lu, John S. Mccartney

Civil Engineering Faculty Publications - Archive

In this study, we numerically and experimentally evaluated heat transfer in soils under unsaturated conditions in the context of simulating a laboratory-scale, three-dimensional soil-borehole thermal energy storage (SBTES) system. Most previous studies assumed that soil thermal and hydraulic properties are constant and that heat transfer in soil occurs only in the form of conduction, neglecting convective and latent heat transfer. In addition, there is a lack of data from controlled experiments to validate multiphase numerical models that can be used to better study SBTES systems installed in the vadose zone. The goal of this study was to evaluate the significance …

Pace, Clint And Linda Pace (Fa 879), Manuscripts & Folklife Archives

Folklife Archives Finding Aids

Finding aid only for Folklife Archives Project 879. Project titled: “Water-powered Mills in Warren County, Kentucky.” Includes history of water run mill sites in Warren County, Kentucky, mill terms, and survey sheets with brief descriptions of mills. Sheets include a brief description, informant’s name, and an illustration of the water mill.

Linder, Gary (Fa 953), Manuscripts & Folklife Archives

Folklife Archives Finding Aids

Finding aid only for Folklife Archives Project 953. Paper titled: “White Mills.” Project includes a description and photo of White Mills village and the watermill in Hardin County, Kentucky.

Influent Wastewater Microbiota And Temperature Influence Anaerobic Membrane Bioreactor Microbial Community, Matthew Seib, K. J. Berg, Daniel Zitomer

Civil and Environmental Engineering Faculty Research and Publications

Sustainable municipal wastewater recovery scenarios highlight benefits of anaerobic membrane bioreactors (AnMBRs). However, influences of continuous seeding by influent wastewater and temperature on attached-growth AnMBRs are not well understood. In this study, four bench-scale AnMBR operated at 10 and 25 °C were fed synthetic (SPE) and then real (PE) primary effluent municipal wastewater. Illumina sequencing revealed different bacterial communities in each AnMBR in response to temperature and bioreactor configuration, whereas differences were not observed in archaeal communities. Activity assays revealed hydrogenotrophic methanogenesis was the dominant methanogenic pathway at 10 °C. The significant relative abundance of Methanosaeta at 10 °C concomitant …

Recovery Of Agricultural Nutrients From Biorefineries, Daniel Elliott Carey, Yu Yang, Patrick J. Mcnamara, Brooke K. Mayer

Civil and Environmental Engineering Faculty Research and Publications

This review lays the foundation for why nutrient recovery must be a key consideration in design and operation of biorefineries and comprehensively reviews technologies that can be used to recover an array of nitrogen, phosphorus, and/or potassium-rich products of relevance to agricultural applications. Recovery of these products using combinations of physical, chemical, and biological operations will promote sustainability at biorefineries by converting low-value biomass (particularly waste material) into a portfolio of higher-value products. These products can include a natural partnering of traditional biorefinery outputs such as biofuels and chemicals together with nutrient-rich fertilizers. Nutrient recovery not only adds an additional …

Pyrolysis Of Dried Wastewater Biosolids Can Be Energy Positive, Patrick J. Mcnamara, Jon Koch, Zhongzhe Liu, Daniel Zitomer

Civil and Environmental Engineering Faculty Research and Publications

Pyrolysis is a thermal process that converts biosolids into biochar (a soil amendment), py-oil and py-gas, which can be energy sources. The objectives of this research were to determine the product yield of dried biosolids during pyrolysis and the energy requirements of pyrolysis. Bench-scale experiments revealed that temperature increases up to 500 °C substantially decreased the fraction of biochar and increased the fraction of py-oil. Py-gas yield increased above 500 °C. The energy required for pyrolysis was approximately 5-fold less than the energy required to dry biosolids (depending on biosolids moisture content), indicating that, if a utility already uses energy …

Bs News September/October

Building Services Engineering

No abstract provided.

Framework For Event-Based Semidistributed Modeling That Unifies The Scs-Cn Method, Vic, Pdm, And Topmodel, Mark Bartlett, Anthony J. Parolari, Jeffrey Mcdonnell, Amilcare Porporato

Civil and Environmental Engineering Faculty Research and Publications

Hydrologists and engineers may choose from a range of semidistributed rainfall-runoff models such as VIC, PDM, and TOPMODEL, all of which predict runoff from a distribution of watershed properties. However, these models are not easily compared to event-based data and are missing ready-to-use analytical expressions that are analogous to the SCS-CN method. The SCS-CN method is an event-based model that describes the runoff response with a rainfall-runoff curve that is a function of the cumulative storm rainfall and antecedent wetness condition. Here we develop an event-based probabilistic storage framework and distill semidistributed models into analytical, event-based expressions for describing the …

Post-Liquefaction Residual Strength Assessment Of The Las Palmas, Chile Tailings Failure, Tristan Reyes Gebhart

Master's Theses

Assessment of post-liquefaction residual strength is needed for the development of empirically-based, predictive correlations for earthquake engineering design. Previous practice commonly assigned negligible strengths to liquefied materials for engineering analysis, producing overly-conservative designs. Increasingly available case history data, and improved analytical tools have allowed for more accurate and less overly-conservative estimation of soil residual strength, improving empirical predictive models. This study provides a new case history to the limited suite of (approximately 30) liquefaction failure case histories available for post-liquefaction in-situ strength predictive correlations.

This case history documents the Las Palmas gold mine tailings dam failure, resulting from seismic-induced liquefaction …