Civil Engineering Commons^™

Performance Measure Methodology Of Project Management Practices In Local Government Agencies, Johanes Johanes Makahaube

Open Access Theses & Dissertations

Local government agencies have adopted project management practices to deliver public work projects. The agencies need to measure project management performance to ensure the consistency, control, and monitoring of the project delivery process. However, local government agencies have not adopted a systematic method to measure the organization's project-management performance. At present, there is a gap regarding methods to measure project management performance in delivering construction projects. This study aims to assist local government agencies in improving their project management processes by implementing a comprehensive methodology to assess project management's performance. This dissertation is organized into three major chapter-papers: the first …

Performane Characterization Of Stabilized Materials In Pavement Foundations, Mohammad Rashidi

Open Access Theses & Dissertations

Cementitious Stabilization has been widely used to improve the strength and durability of granular materials for the construction and rehabilitation of pavement structures. Improved mechanical properties and durability of the stabilized materials combined with relatively low cost makes it an attractive method for design engineers. Although this technique appears simple and straight forward, engineering properties of individual soils and aggregates may alter widely due to heterogeneity in soil composition, difference in micro structure among soils, heterogeneity of geologic deposits and differences in chemical interactions of water with soil particles. These differences necessitate the comprehensive study in order to provide the …

Rpas: An Enhanced Finite Element Code For The Mechanistic Analysis Of Rigid Pavements, Nancy Aguirre

Open Access Theses & Dissertations

Significant amount of research has been conducted to improve the design of rigid pavements through the development of mechanistic analysis tools capable of accurately modeling the performance of such pavements. The use of the finite element (FE) method as a comprehensive tool for modeling the responses of rigid pavements has been limited in the past because of the complexity of calculations in modeling nonlinear behaviors, which are difficult to describe mathematically and computationally. Researchers from The University of Texas at El Paso developed NYSLAB, an FE modeling tool, for the analysis of rigid pavements subjected to traffic and environmental loading …

Assessment Of Hydraulic And Structural Behavior Of Inundated Pavements, Mojtaba Asadi

Open Access Theses & Dissertations

Severe flooding events have increasingly inundated the transportation infrastructure, including road networks, across the world and the Unites States. Such extreme events induce significant ingress of water into the pavement layers, which in turn leads to structural defects due to the reduction of the shear strength and resilient moduli of the soil layers, asphalt stripping in flexible pavements, pumping effect in rigid pavements, migration of fines into drainable layers, and swelling of expansive soils. Consequently, premature pavement failure may take place that can impose unforeseen maintenance/rehabilitation costs to highway agencies. Although some experimental research studies have been conducted to assess …

Extracting Mechanical Properties Of Compacted Geomaterials Using Intelligent Compaction Technology, Aria Fathi

Open Access Theses & Dissertations

The primary tool currently used for quality management of earthwork and unbound aggregates is the nuclear density gauge (NDG) to ensure appropriate density and moisture content. Measurement of moisture content and dry density, even though quite practical and straightforward, does not directly tie the construction quality with the mechanistic-empirical design processes where stress and modulus are employed. With the recent popularity of the mechanistic pavement design procedures, research efforts have been undertaken to understand and develop procedures for implementing modulus-based quality control (QC) procedures of compacted geomaterials. These procedures involve the use of in-situ nondestructive testing (NDT) devices that estimate …

Development Of A Framework For The Calibration Of Rpas, A 3d Finite Element Analysis Tool For Rigid Pavements, Abbasali Taghavighalesari

Open Access Theses & Dissertations

The accurate analysis of rigid pavements requires a reliable modeling procedure based on integrating mechanistic analysis methods (i.e. closed-form solutions or numerical methods) and empirical observations (i.e. field measurements and laboratory test results). The use of the finite element method to model the response of rigid pavements has increased in recent decades due to its capability to incorporate the complexity of material behavior, traffic information, and environmental condition. Researchers from the University of Texas at El Paso developed the software Rigid Pavement Analysis System (RPAS) to comprehensively analyze the response of concrete pavements under different geometric configurations, foundation models, temperature …

Impact Of Interface Condition On Performance Of Thin Asphalt Overlays, Cheng Zhu

Open Access Theses & Dissertations

Asphalt overlay has been widely used in the United States as a cost-effective maintenance approach to keep the pavement in a satisfactory condition. In recent years, many studies have been conducted to investigate the overlay asphalt mix design, overlay pavement design, and quality control/quality assurance for the asphalt overlay pavement. In Texas, thin overlays (lift thickness less than 2 in.) and ultra-thin overlays (lift thickness of 0.5 in. to 0.75 in.) seem to be more beneficial than conventional asphalt overlays. For this type of overlay, the bonding condition between the overlay and existing AC layer is crucial for the pavement …

Land Use/Cover Change And Their Impacts On Streamflow In Kikuletwa Catchment Of Pangani River Basin, Tanzania, Upendo Msovu

Tanzania Journal of Engineering and Technology (TJET)

Streamflow perturbation is highly prevalent in Kikuletwa catchment. However, little is known concerning land use/cover change (LULCC) with regard to streamflow perturbation in the catchment. This study aims to detect the historical and predict future LULCC and assess their impacts on streamflow amounts using the Soil and Water Assessment Tool (SWAT) model. Supervised classification of Landsat imagery data for 1985, 2000 and 2015 years was done in ERDAS 14 Imagine software. Future prediction of LULCC was done using Module for Land Use Change Evaluation (MOLUSCE) tool, a QGIS plug-in. An accuracy ranging from 79% to 82% was obtained for all …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

Practical Approach For Removal Of Natural Organic Matter And Defluoridation Of Maji Ya Chai River Water: Use Of Acid Pre-Treated Bone Char And Coagulants, Godfrey Mbabaye

Tanzania Journal of Engineering and Technology (TJET)

The removal of natural organic matter (NOM) and fluoride from Maji ya Chai River water (MCRW) using bone char (BC) and coagulants was investigated. Fine BC particles ranging from 0.045 to 0.2 mm were used in a 1 litre half-filled container, stirred at 300 rpm for 60 min followed by addition of a commercial coagulant and allowed to settle for 24 hours to remove NOM. MCRW practicable and affordable defluoridation method for removal of NOM through defluoridation with BC pre-treated with 0.3 N HCl followed by coagulation with Poly-aluminium chloride (PACl) is proposed. Reduction of fluoride from 21 mg/L to …

Reviewing The Potential And Constraints Of Modified Technology Options For Faecal Sludge Management In Dar Es Salaam, Tanzania, Amour Seleman

Tanzania Journal of Engineering and Technology (TJET)

Cities in the developing world face the challenge of safe management of faecal sludge because of rapid population growth that overwhelms the sanitation infrastructure and services. In developing countries, only 50% of faecal sludge (FS) generated is safely managed the remaining portion is haphazardly disposed of in the environment risking public health and environment. In response to the urgent need for safely managed sanitation services, technological options for containment, desludging and transportation of FS are being modified. This paper reviewed current desludging practices and the potential of modified technological options for addressing FSM at containment, desludging, and transportation in Dar …

Effect Of Recycled Concrete Aggregates On The Long-Term, Elastic, Total Deflection And Strength Of Precast Prestressed Hollow Core Concrete Slabs, Lizeth Marisol Gomez Santana

Civil Engineering Theses

Concrete constitutes the largest portion of construction and demolition waste generated each year in the United States. The Environmental Protection Agency (EPA) estimates that the total production of construction and demolition of concrete waste during 2015 was 381.8 million tons. In order to reduce the economic and environmental effects of waste concrete, researchers have begun to incorporate it into concrete mixtures. However, the inherent variability in mechanical properties between RCA sources makes it difficult to quantify the maximum permissible replacement of natural aggregate and the end-result properties of concrete. This project investigates the use of recycled concrete aggregates (RCA) obtained …

Strengthening Of Corroded Steel Structures Using Cfrp – An Experimental Review, Ghada El-Mahdy Ph.D., P.Eng, Abdallah H. Yassin, Abdel El Rahman Khaled

Civil Engineering

Fibre reinforced polymers (FRP) have been widely used to strengthen reinforced concrete structures, however, nowadays their use to strengthen steel structures is under investigation. In particular, the need to strengthen corroded steel structures found in aggressive environments, such as marine environments, which have undergone a reduction in cross-sectional area and hence a reduction in their load-carrying capacity is in need of studying. The main problems that arise when using carbon fibre reinforced polymer (CFRP) sheets to strengthen steel structures is the weakness in the interfacial bond between the CFRP and the steel surface, the thinness of CFRP sheet, and the …

In-Plane Vibration Of Hammerhead Resonators For Chemical Sensing Applications, Luke A. Beardslee, Christopher Carron, Kemal S. Demirci, Jonathan Lehman, Steven Schwartz, Isabelle Dufour, Stephen M. Heinrich, Fabien Josse Phd, Oliver Brand

Civil and Environmental Engineering Faculty Research and Publications

Thermally excited and piezoresistively detected in-plane cantilever resonators have been previously demonstrated for gas- and liquid-phase chemical and biosensing applications. In this work, the hammerhead resonator geometry, consisting of a cantilever beam supporting a wider semicircular “head”, vibrating in an in-plane vibration mode, is shown to be particularly effective for gas-phase sensing with estimated limits of detection in the sub-ppm range for volatile organic compounds. This paper discusses the hammerhead resonator design and the particular advantages of the hammerhead geometry, while also presenting mechanical characterization, optical characterization, and chemical sensing results. These data highlight the distinct advantages of the hammerhead …

Examining The Effectiveness Of A 4d Schedule And A Virtual Reality Model On A Modular Project: Unlv Solar Decathlon Case, Rajarshi Ghimire

UNLV Theses, Dissertations, Professional Papers, and Capstones

The use of a 4D schedule as technological advancement has brought significant improvement to the planning and execution of construction projects, through visualizing stepwise construction progress, following a sequence of pre-planned activities, and finalizing a baseline schedule with necessary changes. Moreover, the application of virtual reality (VR) to create interactive 3D models of a planned structure has made it possible to make a detailed planning of any construction project. Because of these benefits, the use of 4D schedules and VR in the construction industry has increased drastically, leading to improved planning and execution. However, past studies have given little attention …

Alkali-Silica Reactivity Of Mortars Containing Natural Pozzolan, Arash Kian

UNLV Theses, Dissertations, Professional Papers, and Capstones

Alkali-silica reactivity is one of the most recognized deleterious phenomena in Portland cement concrete resulting in cracks, spalling, and other deleterious mechanisms.

The aim of this study was (i) to assess the extent of reactivity of the aggregates, quarried from seven different sources, suspected of being conducive to ASR, and (ii) to compare the effectiveness of industrial (Class F fly ash) and natural pozzolans in mitigation of alkali-silica reactivity of the studied aggregates. To this end, seven aggregate sources, four natural pozzolan sources, and one source of Class F fly ash were used. ASTM Type V Portland cement was replaced …

Development Of Natural Perlite Based Concrete For Sustainable Construction, Seyedmahmoud Motaharikarein

UNLV Theses, Dissertations, Professional Papers, and Capstones

This study aimed to partially replace Portland Cement (PC) with environmentally friendly binders capable of improving the longevity of concrete. The new binders consisted of different proportions of natural pozzolan (perlite) with various fineness and particle size distributions. A step-by-step research program was designed to: (1) discover the optimum fineness of perlite powder and its optimum replacement level with cement; (2) investigate the rheological properties of the perlite-containing mixtures, and examine whether this binder can be used in selfconsolidating concrete; and (3) assess the weaknesses of the new binder, and improve its deficiencies by using nanomaterials such as nano-silica. The …

Sizing A New Bike Sharing System For The University Of Nevada, Las Vegas, Nesley Orochena

UNLV Theses, Dissertations, Professional Papers, and Capstones

The strategic planning objectives for a novel Bike Sharing Systems (BSS) are to locate the BSS stations, size the stations, and determine the bicycle fleet size, among others. Current guidelines to design BSS programs are tailored to city centers with large coverage areas and high bicycle to population ratios, and thus not directly transferable to a university setting. An ordered probit model was created using data from a university online stated preference survey to determine the key factors that affect the uptake rates for the UNLV BSS program and to estimate the potential demand. The demand analysis was incorporated into …

Impact Of Design Cost Percentage On Cost Growth, Schedule Growth, And Construction Intensity Of Road Construction Projects, Elina Prajapati

UNLV Theses, Dissertations, Professional Papers, and Capstones

The performance of construction projects is measured in terms of cost and schedule variation. Studies have identified that such variations are mainly due to design changes, which are more frequent on projects executed through the design-bid-build (DBB) delivery method. Thus, the design factor is identified as one of the major parameters affecting the performance of DBB projects. Despite the majority of road projects being constructed following the DBB method, the impact of design cost on the performance of road projects has not been sufficiently studied yet. Therefore, this study focuses on determining the effect of design cost on the performance …

Application Of Data-Driven And Process-Based Modeling Approaches For Water Quality Simulation In Lakes And Freshwater Reservoirs, Ali Saber Sichani

UNLV Theses, Dissertations, Professional Papers, and Capstones

Lakes and freshwater reservoirs often serve as the primary drinking and irrigation water sources for surrounding communities. They provide recreational and tourism opportunities, thereby promoting the prosperity of neighboring communities. Reliable estimates of water quality in lakes and reservoirs can improve management practices to protect water resources.

Seasonal water temperature and solar shortwave radiation variations, and their subsequent interactions with water column aquatic life, combined with seasonal variations of mixing intensity throughout the water column, result in variations of water quality constituents with depth during the annual cycle. The complexity of these variations entails the use of advanced water quality …