Aviation Commons^™

Validation Of Digital Surface Models (Dsms) Retrieved From Unmanned Aerial Vehicle (Uav) Point Clouds Using Geometrical Information From Shadows, Mahyar Aboutalebi, Alfonso F. Torres-Rua, Mac Mckee, William Kustas, Héctor Nieto, Calvin Coopmans

AggieAir Publications

Theoretically, the appearance of shadows in aerial imagery is not desirable for researchers because it leads to errors in object classification and bias in the calculation of indices. In contrast, shadows contain useful geometrical information about the objects blocking the light. Several studies have focused on estimation of building heights in urban areas using the length of shadows. This type of information can be used to predict the population of a region, water demand, etc., in urban areas. With the emergence of unmanned aerial vehicles (UAVs) and the availability of high- to super-high-resolution imagery, the important questions relating to shadows …

The Impact Of Shadows On Partitioning Of Radiometric Temperature To Canopy And Soil Temperature Based On The Contextual Two-Source Energy Balance Model (Tseb-2t), Mahyar Aboutalebi, Alfonso F. Torres-Rua, Mac Mckee, Hector Nieto, William Kustas, Calvin Coopmans

AggieAir Publications

Tests of the most recent version of the two-source energy balance model have demonstrated that canopy and soil temperatures can be retrieved from high-resolution thermal imagery captured by an unmanned aerial vehicle (UAV). This work has assumed a linear relationship between vegetation indices (VIs) and radiometric temperature in a square grid (i.e., 3.6 m x 3.6 m) that is coarser than the resolution of the imagery acquired by the UAV. In this method, with visible, near infrared (VNIR), and thermal bands available at the same high-resolution, a linear fit can be obtained over the pixels located in a grid, where …

Safety Culture Awareness In Aviation Maintenance: Foundations To Present, Tori Kobayashi

Student Works

Safety Culture awareness in aviation maintenance organizations is necessary for the performance of effective maintenance and the safe operation of aircraft. Maintenance organizations that promote a strong culture of safety encourage honesty and integrity within the workplace. The environment where maintenance is performed differs from other aviation related operations. The promotion of safety in maintenance operations has been proven over time in publications written by the earliest pioneer in aviation safety, Jerome Lederer. The awareness of safety culture in aviation maintenance has evolved with the industry to the present day.

High Speed Mid Altitude Aircraft Project, Eric Yan

Honors Program Theses and Projects

This project designs aircraft that addresses the space constraint that limits airport capacity by exploiting lift created by flying aircraft at high speeds (350-500KIAS) in the mid altitudes of FL100-FL200 to increase the payload of smaller aircraft. Three solutions with the length and wingspan footprint of the Boeing 737-800 are produced using the software X-Plane, then virtually flight tested for various performance data. The results find that adoption of these designs can yield significant capacity increases, albeit at reduced fuel efficiency.

Subscale Mars Colonization Mission, Cameron J. Lamack, James Lumsden, Sean Nevin, Donner Schoeffler, Riley Evers, Alexandra Poulakos, Skyler Tan, Anthony Keba, Siraj Zaman, Ali Altamimi, Anthony Modica

Honors Thesis

The team will compete in the SAE (Society of Automotive Engineers) Aero Design West Advanced Class competition, held 5-7th April 2019 in Van Nuys, California. The team will work to develop, through research, design, optimizational trade studies, and manufacturing, a system for the deployment of parasitic aircraft, as well as payload. The system will consist of a primary fixed-wing aircraft, parasitic autonomous gliders, a real-time altitude data acquisition system, as well as both static and releasable payload. The deployable gliders must navigate autonomously to a targeting area on the ground without any on-board propulsion. The releasable payload, which will consist …

Evaluating Small Uas Operations And National Airspace System Interference Using Aeroscope, Ryan J. Wallace, Kristy M. Kiernan, Tom Haritos, John Robbins, Jon M. Loffi

Journal of Aviation Technology and Engineering

A recent rash of near mid-air collisions coupled with the widespread proliferation of small unmanned aircraft systems (sUAS) raise concerns that integration is posing additional risk to the National Airspace System. In 2016, sUAS sighting reports by manned aircraft pilots averaged 147 per month. In the first three quarters of 2017, sUAS sightings jumped to 188 per month. The purpose of this study was to evaluate sUAS operator behavior to determine potential interference with aviation operations. While previous research has indeed yielded findings about operator behavior, such studies were generally based on data derived from Aviation Safety Reporting System filings …

Women In Aviation: A Workforce Report, Rebecca K. Lutte

Aviation Institute Faculty Publications

Aviation industry forecasts reveal the depth of the need for qualified personnel worldwide and the projected growth of the industry. Over the last five years, the industry has experienced average year over year passenger traffic growth of 6.5%, resulting in “unprecedented” financial prosperity for North American airlines (Boeing, 2018a). North American air carriers have accounted for more than half of the global industry prosperity in the last five years (Boeing, 2018a). The growth is attributed to multiple factors including lower air fares, higher standards of living in large emerging markets such as China and India, new airline business models, and …

Exploring Perceived Usability And Interpretability Of Aviation Weather Products Among Ga Pilots, Jackie Mcsorley, Jayde King, Beth Blickensderfer

General Aviation Weather Display Interpretation

• Introduction
• Results
• Discussion
• Current Investigations

Aviation Sustainability, Elizabeth Gemmer

Honors Projects

Sustainability in aviation has become a prominent issue. There is a substantial amount of information on sustainability measures taken and discussed at the local and global levels. However, the information is spread out over a wide array of sources and many people are not aware of what is being done. There have been many past efforts to integrate sustainability into aviation, those efforts continue today and will continue into the future. Aviation is a rapidly growing industry; as the industry grows and there becomes even more of a need for sustainability measures to keep it a viable mode of transport, …

Development Of A Multi-Probe Kelvin Scanner Device For Industrially-Relevant Characterization Of Surface-Activated Carbon Fiber Reinforced Thermoplastic Composites, Kirby Simon

McKelvey School of Engineering Graduate Student Theses & Dissertations

Carbon fiber reinforced thermoplastic (CFRTP) composites are becoming increasingly attractive materials in manufacturing due to their lightweight nature, mechanical strength, and corrosion resistance. Surface activation of these materials is usually required during processing to increase the bond strength of assemblies (aerospace and automotive industries) or improve adhesion with implants (biomedical industry). Industrially-relevant, nondestructive quality control methods for assessing the activation state of these materials do not currently exist, however. Applying principles discovered through the use of scanning probe microscopy, a multiple-probe Kelvin scanning (MPKS) device has been developed that can assess the uniformity of the activation state of plasma-treated CFRTP …

A Behavioral Research Model For Small Unmanned Aircraft Systems For Data Gathering Operations, Paul Leonard Myers Iii

Doctoral Dissertations and Master's Theses

According to Hitlin (2017) of the Pew Research Center, only 8% of U.S. citizens own an unmanned aircraft. Additionally, regarding feelings if U.S. citizens saw an unmanned aircraft flying close to where they live, 26% say they would be nervous, 12% feel angry, and 11% are scared. As of March 9, 2018, there were 1,050,328 U.S. small unmanned aircraft system (sUAS) registrations compared to 947,970 November 29, 2017. While sUAS use has increased in the U.S., it has lagged when compared to other items for personal use available to U.S. citizens as 92% own cell phones (Anderson, 2015). This slower …

The Changing Face Of Airmanship And Safety Culture Operating Unmanned Aircraft Systems, Tracy Lamb

Student Works

The notion of using drones for commercial purposes has evolved in the past 5 years from the initial “boom” of excitement around this, somewhat of a novelty and curiosity, to more calculated and sophisticated use of unmanned aircraft systems (UAS), or drones. In the hands of true professionals, drones can offer highly efficient and profitable solutions for industrial, and commercial inspections and other data capturing tasks. The appetite for safe and efficient collection of data is a changing face of safety cultures and how teams and individuals apply airmanship principles, and how inspection crew and UAS crew interact. UAS are …

Aviation Safety Action Program In The United States Air Force: Mobility Aircrews’ Intentions To Use Safety Reporting, Travis Jared Whittemore

Doctoral Dissertations and Master's Theses

No abstract provided.

Unmanned Aerial System Integration Into The National Airspace System And Airports: Risk Mitigation Using Content Analysis Methodology, Bhoomin Bhupendrabhai Chauhan

Theses and Dissertations

Over the last few years, the use of unmanned aerial systems (UAS) has significantly increased. With an increase in the use of UASs, the number of UAS sightings near manned aircraft and airports have also increased, as shown by the Federal Aviation Administration (FAA)(FAA, 2019a). Although not every near sighting had a severe consequence associated with it, the risks were still present. As UASs are becoming more readily available to the general public, the risks present due to UASs flying in the National Airspace System (NAS) and near airports is also increasing. For the study, incident and accident reports were …

Factors Related To The Assessment Of The Effectiveness Of Environmental Management Systems (Ems) At Airports, Kainan Li

Theses and Dissertations

The purpose of this study was to identify factors that can be used to assess the effectiveness of EMS at airports in the United States (U.S.). A survey research methodology was used for this study in two phases. The first phase of the research study included a preliminary expert opinion survey of airport managers and other individuals acting in a supervisory role to determine and discuss how EMS help improve environmental performance, and ranked factors that may be related to assessing the effectiveness of EMS. The second survey was constructed based on feedback from these experts and targeted airport employees …

Aviation Professionalism: Examining The Concept Of Professionalism Within And Between Major Subgroups Of The Aviation Industry, Rüştü Tolga Turgut

Theses and Dissertations

The purpose of this study was to conduct a secondary analysis of Alhallaf’s (2016) study on aviation professionalism by disaggregating his data into five subgroups: Aircraft Maintenance Technicians (AMT); Airport Managers (AM); Air Traffic Controllers (ATC); Non-Pilot Aviation Employees (NPAE), which consisted of business aviation, flight operations, and aviation colleges/universities; and Pilots. The study posed three research questions and endeavored to (a) determine factors related to professionalism in each subgroup, (b) determine the differences in levels of professionalism among the subgroups, and (c) examine each subgroup’ perceptions of professionalism. The study used an explanatory correlational design to determine the relationship …

Mitigating Risk Tolerance Among General Aviation Pilots: Identifying Factors That Contribute To Ga Pilots’ Risk Perception, Nazif Sani Nuhu

Theses and Dissertations

The purpose of this study was to identify factors that contributed to general aviation (GA) pilots’ level of risk perception, which could then be manifested as an increase in risk tolerance. The study used an explanatory correlational design to determine what factors were related to risk perception. Research factors included gender, age, marital status, race/ethnicity, education level, flight hours, single- and multi-engine hours, hours as PIC, type of flight training, number of FAA licenses/ratings, number of hazardous events pilots were involved in, self-efficacy, aviation safety attitudes, level of psychological distress, and locus of control. The dependent variable was risk perception. …

Extreme Altitude Search And Rescue Helicopter, Matthew J. De Sieno, Anthony Chavarria, David Stuver, Zach Boss

Senior Design Project For Engineers

The goal of this design was to develop an extreme altitude rescue helicopter capable of retrieving hikers stranded on top of Mount Everest. Using the Eurocopter AS350 as a baseline, a conceptual model was produced that is fully capable of hovering and delivering forward flight at the desired altitude of 8,848 meters. Combined blade element momentum theory, proper airfoil selection, and forward flight calculations were utilized in order to optimize the rotor for the given flight conditions on top of Mount Everest. Conceptual fluid dynamics and CAD modeling aided in the process of visually designing the fuselage and rotor. Not …

Collaborative Product–Service Approach To Aviation Maintenance, Repair, And Overhaul. Part Ii: Numerical Investigations, Cassio Dias Goncalves, Michael Kokkolaras

Journal of Aviation Technology and Engineering

This two-part paper proposes a new collaborative approach to airframe maintenance, repair, and overhaul (MRO). A quantitative model is introduced in Part I to represent the business relationships between original equipment manufacturers (OEMs) and MRO enterprises. In Part II, the presented model is used to assess potential financial benefits obtained by each of these stakeholders as a result of the collaboration.

The quantitative model is built to capture the main dependencies between an independent MRO operating in South America and its interactions with three major airframe OEMs. Interviews were conducted with MRO and OEM professionals to identify the most impactful …

Control Failures And How To Deal With It, Nihad E. Daidzic

Aviation Department Publications

FAA Safety Seminar (GL1591497) held at Minnesota State University, Mankato Wiecking Center Auditorium at 18:00 CST on Thursday, April 18, 2019.