Aviation Commons^™

Benefits Of Additional Runway Crossings On Parallel Runway Operations, Sergio Ezequiel Taleisnik

Doctoral Dissertations and Master's Theses

As the air transportation industry expands, airports face numerous challenges to manage the increasing traffic. Among these problems, runway crossings are a considerable source of ground traffic inefficiency and risk. Building end-around taxiways are the only strategy to avoid crossings, but these are not always feasible, and therefore airport planners must find alternatives. This study consisted of a simulation over an airport that currently requires a vast amount of its arrivals to go through runway crossings in order to reach the apron; the airport simulation software utilized was the Total Airspace and Airport Modeler (TAAM). The process began with a …

English Language Proficiency And Aviation Safety, Robert Fowler Jr.

Student Works

The goal of this research study is to determine if aviation incidents and accidents due to deficiencies in English language proficiency have increased in the last 10 years based on data from the National Aeronautics and Space Administration (NASA) Aviation Safety Reporting System (ASRS). In addition, this study will determine whether deficiencies in English language proficiency have a significant impact on aviation safety. There are currently 184,636 student pilots according to the Federal Aviation Administration Airmen Certification System. Included in this number are 11,776 student pilots with a foreign address (Federal Aviation Administration [FAA], 2019). Findings presented at a NASA …

Providing A Piece Of The Puzzle: Insights Into The Aircraft Availability Conundrum, Jonathan D. Ritschel, Tamiko L. Ritschel, Nicole B. York

Faculty Publications

Aircraft availability (AA) is a key metric for assessing operational readiness. The declining trend in AA is a documented concern for senior Air Force leaders. This paper aims to investigate the components of non-available time and subsequently focuses on the largest and fastest growing category: not mission capable maintenance unscheduled (NMCMU). Then, utilization of aircraft platforms is examined to determine the readiness benefits of increasing available hours.

Investigation Into The Effects Of Blade Tip Twist On Noise Reduction For A Naca 0012 Rotor Blade, Uyen T. Sou

McNair Research Journal SJSU

The advancement of the urban air mobility concept is heavily dependent on the public acceptance of the aircraft vehicles used for air taxis. The importance of the perception of noise by humans is crucial to the passing of legislation and proposals working to implement the new transport system. The investigation into how the noise perception can be reduced is vital to the success of the personal air travel industry. The air taxi design has been geared towards the rotorcraft models. Therefore, the investigation into the rotor blade designs is necessary because, similar to helicopters, the main component in noise generation …

The Effect Of Electronic Flight Bags In Flight Training On Preflight Skill Development And Aeronautical Decision Making, Shlok Misra, Michele Halleran

Student Works

This study was designed to evaluate the effects of utilizing Electronic Flight Bags (EFBs) in flight training with emphasis on preflight skill development and Aeronautical Decision Making. The study participants were student pilots or private pilots who used EFBs in flight training and had not logged more than 100 total flight hours. The study utilized a simulation of the preflight process of a Visual Flight Rules cross-country flight in which the participants answered questions related to the flight preparation. Fifty percent of the study’s population completed this survey with the information provided through an EFB and the other 50% sample …

Modifying Casting Parameters To Improve The High Temperature Ductility Of Investment Cast Nickel-Based Superalloy Pwa 1455, Lars Alexander Hedin, Cole Magnum Introligator

Materials Engineering

PCC Structurals, an industry leader in superalloy investment castings, has observed inconsistencies in the stress rupture performance of polycrystalline nickel-based superalloy PWA 1455. PCC has changed their casting parameters to reduce the thermal gradient during cooling but have been unable to correlate these changes with an increase in stress rupture elongation. Metallographic examination of past samples indicated microstructures composed of non- equiaxed dendritic grains with mean diameter of .021 inches along the test axis. A similar study on polycrystalline superalloys has indicated that excessive superheat temperatures above the liquidus can result in large grains identical to those observed, limiting the …

An Afternoon With General Thomas P. Stafford, Stafford Air & Space Museum

Programs

An Afternoon with General Thomas P. Stafford

Sunday, May 19th, 2019 at 2:00 P.M. at the Weatherford High School Performing Arts Center.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

Apollo 10, 50th Anniversary Gala, Stafford Air & Space Museum

Programs

The Apollo 10 50th Anniversary Gala was held on May 18th, 2019 at the Stafford Air & Space Museum in Weatherford, Oklahoma.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

Forensic Analysis Of Spy Applications In Android Devices, Shinelle Hutchinson, Umit Karabiyik

Annual ADFSL Conference on Digital Forensics, Security and Law

Smartphones with Google's Android operating system are becoming more and more popular each year, and with this increased user base, comes increased opportunities to collect more of these users' private data. There have been several instances of malware being made available via the Google Play Store, which is one of the predominant means for users to download applications. One effective way of collecting users' private data is by using Android Spyware. In this paper, we conduct a forensic analysis of a malicious Android spyware application and present our findings. We also highlight what information the application accesses and what it …

Estimation Of Soil Moisture At Different Soil Levels Using Machine Learning Techniques And Unmanned Aerial Vehicle (Uav) Multispectral Imagery, Mahyar Aboutalebi, L. Niel Allen, Alfonso F. Torres-Rua, Mac Mckee, Calvin Coopmans

AggieAir Publications

Soil moisture is a key component of water balance models. Physically, it is a nonlinear function of parameters that are not easily measured spatially, such as soil texture and soil type. Thus, several studies have been conducted on the estimation of soil moisture using remotely sensed data and data mining techniques such as artificial neural networks (ANNs) and support vector machines (SVMs). However, all models developed based on these techniques are limited to site-specific applications where they are trained and their parameters are tuned. Moreover, since the system of non-linear equations produced by and conducted in the machine learning process …

Estimation Of Surface Thermal Emissivity In A Vineyard For Uav Microbolometer Thermal Cameras Using Nasa Hytes Hyperspectral Thermal, And Landsat And Aggieair Optical Data, Alfonso F. Torres-Rua, Mahyar Aboutalebi, Timothy Wright, Ayman Nassar, Pierre Guillevic, Lawrence Hipps, Feng Gao, Kevin Jim, Maria Mar Alsina, Calvin Coopmans, Mac Mckee, William Kustas

AggieAir Publications

Microbolometer thermal cameras in UAVs and manned aircraft allow for the acquisition of highresolution temperature data, which, along with optical reflectance, contributes to monitoring and modeling of agricultural and natural environments. Furthermore, these temperature measurements have facilitated the development of advanced models of crop water stress and evapotranspiration in precision agriculture and heat fluxes exchanges in small river streams and corridors. Microbolometer cameras capture thermal information at blackbody or radiometric settings (narrowband emissivity equates to unity). While it is customary that the modeler uses assumed emissivity values (e.g. 0.99– 0.96 for agricultural and environmental settings); some applications (e.g. Vegetation Health …

Validation Of Digital Surface Models (Dsms) Retrieved From Unmanned Aerial Vehicle (Uav) Point Clouds Using Geometrical Information From Shadows, Mahyar Aboutalebi, Alfonso F. Torres-Rua, Mac Mckee, William Kustas, Héctor Nieto, Calvin Coopmans

AggieAir Publications

Theoretically, the appearance of shadows in aerial imagery is not desirable for researchers because it leads to errors in object classification and bias in the calculation of indices. In contrast, shadows contain useful geometrical information about the objects blocking the light. Several studies have focused on estimation of building heights in urban areas using the length of shadows. This type of information can be used to predict the population of a region, water demand, etc., in urban areas. With the emergence of unmanned aerial vehicles (UAVs) and the availability of high- to super-high-resolution imagery, the important questions relating to shadows …

The Impact Of Shadows On Partitioning Of Radiometric Temperature To Canopy And Soil Temperature Based On The Contextual Two-Source Energy Balance Model (Tseb-2t), Mahyar Aboutalebi, Alfonso F. Torres-Rua, Mac Mckee, Hector Nieto, William Kustas, Calvin Coopmans

AggieAir Publications

Tests of the most recent version of the two-source energy balance model have demonstrated that canopy and soil temperatures can be retrieved from high-resolution thermal imagery captured by an unmanned aerial vehicle (UAV). This work has assumed a linear relationship between vegetation indices (VIs) and radiometric temperature in a square grid (i.e., 3.6 m x 3.6 m) that is coarser than the resolution of the imagery acquired by the UAV. In this method, with visible, near infrared (VNIR), and thermal bands available at the same high-resolution, a linear fit can be obtained over the pixels located in a grid, where …

Safety Culture Awareness In Aviation Maintenance: Foundations To Present, Tori Kobayashi

Student Works

Safety Culture awareness in aviation maintenance organizations is necessary for the performance of effective maintenance and the safe operation of aircraft. Maintenance organizations that promote a strong culture of safety encourage honesty and integrity within the workplace. The environment where maintenance is performed differs from other aviation related operations. The promotion of safety in maintenance operations has been proven over time in publications written by the earliest pioneer in aviation safety, Jerome Lederer. The awareness of safety culture in aviation maintenance has evolved with the industry to the present day.

High Speed Mid Altitude Aircraft Project, Eric Yan

Honors Program Theses and Projects

This project designs aircraft that addresses the space constraint that limits airport capacity by exploiting lift created by flying aircraft at high speeds (350-500KIAS) in the mid altitudes of FL100-FL200 to increase the payload of smaller aircraft. Three solutions with the length and wingspan footprint of the Boeing 737-800 are produced using the software X-Plane, then virtually flight tested for various performance data. The results find that adoption of these designs can yield significant capacity increases, albeit at reduced fuel efficiency.

Subscale Mars Colonization Mission, Cameron J. Lamack, James Lumsden, Sean Nevin, Donner Schoeffler, Riley Evers, Alexandra Poulakos, Skyler Tan, Anthony Keba, Siraj Zaman, Ali Altamimi, Anthony Modica

Honors Thesis

The team will compete in the SAE (Society of Automotive Engineers) Aero Design West Advanced Class competition, held 5-7th April 2019 in Van Nuys, California. The team will work to develop, through research, design, optimizational trade studies, and manufacturing, a system for the deployment of parasitic aircraft, as well as payload. The system will consist of a primary fixed-wing aircraft, parasitic autonomous gliders, a real-time altitude data acquisition system, as well as both static and releasable payload. The deployable gliders must navigate autonomously to a targeting area on the ground without any on-board propulsion. The releasable payload, which will consist …

Evaluating Small Uas Operations And National Airspace System Interference Using Aeroscope, Ryan J. Wallace, Kristy M. Kiernan, Tom Haritos, John Robbins, Jon M. Loffi

Journal of Aviation Technology and Engineering

A recent rash of near mid-air collisions coupled with the widespread proliferation of small unmanned aircraft systems (sUAS) raise concerns that integration is posing additional risk to the National Airspace System. In 2016, sUAS sighting reports by manned aircraft pilots averaged 147 per month. In the first three quarters of 2017, sUAS sightings jumped to 188 per month. The purpose of this study was to evaluate sUAS operator behavior to determine potential interference with aviation operations. While previous research has indeed yielded findings about operator behavior, such studies were generally based on data derived from Aviation Safety Reporting System filings …

Women In Aviation: A Workforce Report, Rebecca K. Lutte

Aviation Institute Faculty Publications

Aviation industry forecasts reveal the depth of the need for qualified personnel worldwide and the projected growth of the industry. Over the last five years, the industry has experienced average year over year passenger traffic growth of 6.5%, resulting in “unprecedented” financial prosperity for North American airlines (Boeing, 2018a). North American air carriers have accounted for more than half of the global industry prosperity in the last five years (Boeing, 2018a). The growth is attributed to multiple factors including lower air fares, higher standards of living in large emerging markets such as China and India, new airline business models, and …

Development Of A Multi-Probe Kelvin Scanner Device For Industrially-Relevant Characterization Of Surface-Activated Carbon Fiber Reinforced Thermoplastic Composites, Kirby Simon

McKelvey School of Engineering Graduate Student Theses & Dissertations

Carbon fiber reinforced thermoplastic (CFRTP) composites are becoming increasingly attractive materials in manufacturing due to their lightweight nature, mechanical strength, and corrosion resistance. Surface activation of these materials is usually required during processing to increase the bond strength of assemblies (aerospace and automotive industries) or improve adhesion with implants (biomedical industry). Industrially-relevant, nondestructive quality control methods for assessing the activation state of these materials do not currently exist, however. Applying principles discovered through the use of scanning probe microscopy, a multiple-probe Kelvin scanning (MPKS) device has been developed that can assess the uniformity of the activation state of plasma-treated CFRTP …

Exploring Perceived Usability And Interpretability Of Aviation Weather Products Among Ga Pilots, Jackie Mcsorley, Jayde King, Beth Blickensderfer

General Aviation Weather Display Interpretation

• Introduction
• Results
• Discussion
• Current Investigations