Environmental Design Commons^™

Complete Streets, Jim Speer

2021 Spring Reports (Sullivan)

The City of Sullivan enacted a Quality of Life plan to address multiple improvements to their city, including some of the city’s infrastructure. Mayor Clint Lamb’s goal is to connect the city via roadways and trail systems that are accessible for all transportation methods and attractive for community members and tourists. ENVI460 students provided recommendations based off the city’s need for improvements to road systems and attractiveness. Students recommended a new roadway design for the Main Street section, sustainable infrastructure additions and buffer zones, and green space for attraction sites.

Mitigating Urban Heat Island Effect At Southern City Park, Jim Speer

2021 Spring Reports (Sullivan)

The City of Sullivan indicated the southern City Park as an area of interest for redevelopment as a neighborhood area and for sustainable features. There are existing structures and habitats that they are looking to bolster. Students in ENVI 460 identified multiple components of the city park that could be updated and upgraded to provide more sustainable infrastructure and community focus. They recommended permeable pavers in two locations in the park area, green roofing on some existing structures, and adding native habitats to the overall area.

Sullivan Sustainable Housing Unit, Riem Rostom

2021 Spring Reports (Sullivan)

Students in ENGR401 were tasked with providing recommendations for an energy efficient heating and cooling system for a housing design provided by IAD251. Students performed necessary calculations and compared information with sustainability factors. There are also further recommendations for building sustainable housing.

The Facility Infection Risk Estimator™: A Web Application Tool For Comparing Indoor Risk Mitigation Strategies By Estimating Airborne Transmission Risk, Marcel Harmon, Josephine Lau

Durham School of Architectural Engineering and Construction: Faculty Publications

The COVID-19 pandemic created needs for (a) estimating the existing airborne risk of infection from SARS-CoV-2 in existing facilities and new designs and (b) estimating and comparing the impacts of engineering and behavioural strategies for contextually reducing that risk. This paper presents the development of a web application to meet these needs, the Facility Infection Risk Estimator™, and its underlying Wells–Riley based model. The model specifically estimates (a) the removal efficiencies of various settling, ventilation, filtration and virus inactivation strategies and (b) the associated probability of infection, given the room physical parameters and number of individuals infected present with either …

Designing Gfrp-Reinforced Tilt-Up Wall Panels, Fray F. Pozo-Lora, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Tilt-up construction was effectively enabled on a wide scale in 1979, when the ACI committee 551 report on Tilt-up construction was published, the Recommended Tilt-Up Wall Design, aka, the Yellow Book and the subsequent ACI-SEASC Task, aka the Green Book, and another Tilt-up design and construction manual developed by the ACI in 1988. The Tilt-up Concrete Association was created in 1986 by a group of industry professionals who had the need of an organization dedicated to the industry. ACI 551 maintains a document outlining the standard practice for contemporary Tilt-up design and construction. The ACI 551 document does not consider …

An Investigation Of The Impact Of Covid-19 Infection Control On Visual Art Installations In Hospitals With Pediatric Patients, Shannon Kimich

Electronic Theses and Dissertations

This study investigated the impact of COVID-19 infection control on visual artwork in pediatric hospitals and hospitals caring for pediatric patients. The study involved five hospitals in three southern America states and addressed visual artwork and art installations. The researcher administered an internet-based survey to participants in job functions related to hospital administration, environmental services, and project management across the facilities and received participation from 18 respondents. Additionally, telephone interviews were conducted with three participants with the job titles project manager/analyst, child-life specialist, and environmental services director. Survey questions were designed to examine visual art programs in selected children’s hospitals …

Reasons And Remedies To The Dying Plant Walls, Hayley Q. Mcgough

Construction Management

Sustainability in construction has been increasingly popular and detrimental with the state of the planet and climate change. One of the more popular solutions is the addition of plant façades to a building, which are plants that are put on the vertical of a building. The benefits that come with plant facades include and are not limited to: Reduction of the urban heat island effect, improved air quality, local job creation, improved energy efficiency, building structure protection, noise reduction, increased biodiversity, urban agriculture. These benefits are not reaching their full potential because these plant façades keep dying creating a bigger …

Designing With Users: A Participatory Design As A Community Engagement Program In The City Zoo, Yulia Nurliani Lukito, Nevine R. Kusuma, Enira Arvanda, Zafira R. Ummah

ASEAN Journal of Community Engagement

This article discusses a participatory design project that aims at creating a collaborative design among architectural students, visitors, and zoo management in designing street furniture and selfie spots in city zoos. Participatory design is used in the design process to get the users’ and designers’ interpretation of the space, improve design outcomes, and increase the community awareness of their surroundings. As part of the Universitas Indonesia Community Engagement Program, the zoo design project fosters a collaborative design between the university and zoo community and supports the educational, conservational, and recreational goals of Ragunan Zoo in Jakarta. Designing street furniture and …

How Mixed Reality Will Impact Product Design, Wyatt Coe

Frameless

Mixed reality technology promises to merge our digital and physical worlds, unlocking new realms of experience and design. Designers must consider how this will impact future products and experiences now, to identify the most desirable solutions and applications of this technology. The capability of software to simulate reality could fundamentally shift the way we produce and experience physical and digital products, allowing for simplified physical products that support digital experiences.

Performance Evaluation Of A Prestressed Belitic Calcium Sulfoaluminate Cement (Bcsa) Concrete Bridge Girder, Nick Markosian, Raed Tawadrous, Mohammad Mastali, Robert J. Thomas, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Belitic calcium sulfoaluminate (BCSA) cement is a sustainable alternative to Portland cement that offers rapid setting characteristics that could accelerate throughput in precast concrete operations. BCSA cements have lower carbon footprint, embodied energy, and natural resource consumption than Portland cement. However, these benefits are not often utilized in structural members due to lack of specifications and perceived logistical challenges. This paper evaluates the performance of a full-scale precast, prestressed voided deck slab bridge girder made with BCSA cement concrete. The rapid-set properties of BCSA cement allowed the initial concrete compressive strength to reach the required 4300 psi release strength at …

Discrete Rigid Block Analysis To Assess Settlement Induced Damage In Unreinforced Masonry Façades, Ryan Ehresman, Nathan Taylor, Bora Pulatsu, Ece Erdogmus

Durham School of Architectural Engineering and Construction: Faculty Publications

In this study, a system of discontinuous rigid blocks is employed to simulate the possible damage mechanisms in unreinforced masonry (URM) façades and load-bearing frame systems subjected to settlement using the discrete element method (DEM). First, the employed modeling strategy is validated utilizing the available experimental results presented in the literature. Once there is a good agreement between the computational models and experimental findings, a sensitivity analysis is performed to quantify the influence of the input parameters defined in the DEM-based numerical model. Finally, the proposed modeling strategy is further utilized to assess the damage pattern that may develop in …

Consulting Place As Stakeholder: Accessing The Input Of Ecological Community, Hunter Adkisson

Landscape Architecture Undergraduate Honors Theses

This is a project about how landscape architects approach the landscape in their design process. Indigenous worldviews hold that the world is living and animate in its own right. When we consider stakeholder engagement in this light, the need arises to extend the definition of stakeholders to include the ecological communities of place – the flora, fauna, soils, and other non-human elements of place. To gather that input, I experimented with techniques to access a greater awareness of ecological community at two sites with different levels of urbanity and types of land management practices. This experimental approach was surprisingly successful …

A Comparison Between Ultrasonic Guidedwave Leakage And Half-Cell Potential Methods In Detection Of Corrosion In Reinforced Concrete Decks, Ahmad Shoaib Amiri, Ece Erdogmus, Dana Richter-Egger

Durham School of Architectural Engineering and Construction: Faculty Publications

This article presents the advantages and limitations of a recently developed Ultrasonic Guided Wave Leakage (UGWL) method in comparison to the well-known Half-Cell Potential (HCP) method in their ability to detect corrosion in reinforced concrete (RC) bridge decks. This research also establishes a correlation between UGWL data and chloride content in concrete RC slabs. Concrete slabs submerged in a 10% NaCl solution were monitored using both methods over a period of six months. The chloride content from the three cores (0.84, 0.55, and 0.18%) extracted from the slab after the 6-month long process all exceeded the chloride threshold values suggested …

Lessons From The Classroom – Assessing The Work Of Postgraduate Students To Support Better Hygrothermal Risk Assessment, Joseph Little, Beñat Arregi, Christian Bludau

Conference papers

The widespread adoption of transient simulation modelling tools by building design professionals to support hygrothermal risk assessment of building design specifications is a crucial component in a multi-pronged drive to reduce moisture risk in buildings. Structured upskilling is essential. Much can be learnt about the ways practitioners use such tools by reviewing the work of professional postgraduate student groups. Such review could inform the creation of a user protocol. Peer-review under the responsibility of the organizing committee of the ICMB21.

Assessment Of Carbon Dioxide Emission And Its Impact On High-Rise Mixed-Use Buildings In Egypt, Ahmed Salah Hamza

Theses and Dissertations

With Egypt's vision of 2030 focusing on sustainable development with a true emphasis on Carbon Dioxide (CO₂) emission reduction in the newly built cities and high-rise buildings, efforts are exerted on various levels towards accomplishing the vision’s goals. This is achieved through multiple tools and models associated with aiding the reduction of carbon emissions, yet not a clear one was introduced for the mixed-use buildings in Egypt.

Through this work, a significant gap was identified with respect to high-rise buildings carbon emission assessment in Egypt. This was a main driving force for this work in an attempt to …

Examining The Ecological And Social Implications Of Parklets And Plazas Across Multiple Urban Scales, Joshua L. Muller

Master's Theses

Faced with population increases but stagnant capital improvements and impacts from global warming, cities around the world are experimenting with smaller-scale and cheaper strategies in order to accommodate the new influx of residents. New York City has led the way in converting low-efficiency intersection space into public plazas with a limited range of permanently installed elements and San Francisco has pioneered the concept of the parklet, which converts two to four street parking spaces into a modular and flexible pedestrian space. I seek to answer two questions about these spaces: What are common factors influencing the viability and successful implementation …

Take Heart School, Quentin John Porter

Architectural Engineering

Journeyman International, also known as JI, is a non-profit organization that groups together design and construction students with organizations looking to build humanitarian projects around the world. This pairing is beneficial for both the organization because they get free design and construction expertise, as well as for the students who get real-world experience. The Take Heart School is a planned school and grounds for the region of Migori Kenya. Take Heart Africa is a fair trade store with all profits going to help the impoverished communities of Kenya. The three-acre site will have a school with eight classrooms, offices, a …

City Of San Luis Obispo Creek Walk Phase Iii, Ryan Thomas Anderson, Peyton Marie Ratto

City and Regional Planning

The following project includes a detailed narrative of project components and conceptual designs for the proposed City of San Luis Obispo (SLO) Creek Walk Phase III. The “project area” includes San Luis Obispo Creek and adjacent land uses/parcels from the Nipomo Street Bridge to the Marsh Street Bridge. This project is relevant because the City has interest in developing Phase III as an extension from the current walkway that begins at Mission San Luis Obispo de Tolosa. In order to ensure consistency with City goals and policies, various City documents were reviewed, including the Downtown Concept Plan. Our progress was …

Zoologijos Sodas, Arjun Elvis Urbonas, Dara Lin, Jesus Ramirez Zambrano, Samantha Ung, Robert Milkovich, Jakob Olsen, Azuolas Skucas

Architecture

50'x50' glass house in Palm Springs.

Design And Culture: A Transdisciplinary History, Maurice Barnwell

Purdue University Press Book Previews

Design and Culture: A Transdisciplinary History offers an inclusive overview that crosses disciplinary boundaries and helps define the next phase of global design practice. This book examines the interaction of design with advances in technology, developments in science, and changing cultural attitudes. It looks to the past to prepare for the future and is the first book to offer an innovative transdisciplinary design history that integrates multidisciplinary sources of knowledge into a mindful whole. It shows design as a process that expresses goals through values and beliefs, functioning as a major factor in contemporary cultural life.

Starting with the development …