Construction Engineering Commons^™

Cfrp Retrofitting Schemes For Prestressed Concrete Box Beams For Highway Bridges, Hussein A. Herish, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

This paper investigates various retrofitting schemes for a prestressed concrete box beam using carbon fiber reinforced polymer (CFRP) sheets with the goal of increasing flexural strength. A simply-supported box beam is studied with a constant uniformly distributed load and three gradually increasing concentrated loads proportional to HS20 truck loading of the Association of State Highway and Transportation Officials (AASHTO). Various retrofitting schemes are considered each with single, double, and triple CFRP sheets, respectively, installed in high compression and tension regions. Cross-sectional nonlinear moment-curvature relations are developed and coupled with a finite-difference solution algorithm to predict load-deflection relations for both retrofitted …

Prestressed Concrete Inverted Tee Beams With Cfrp For Building Structures, Herish A. Hussein, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

Presented herein is the outcome of a study of prestressed concrete inverted tee beams with carbon fiber reinforced polymer (CFRP) sheets for possible use in building structures. To determine an effective approach for the use of CFRP, nine different retrofitting schemes are investigated for a prestressed beam under quasi-static distributed load to increase flexural strength. The theoretical analysis is based on coupling moment-curvature relations with a central finitedifference formulation. Three different thicknesses of CFRP sheets are studied in both tension and compression and effective retrofitting schemes are identified.

A Case Study Of Upper-Room Uvgi In Densely-Occupied Elementary Classrooms By Real-Time Fluorescent Bioaerosol Measurements, Chunxiao Su, Josephine Lau, Fang Yu

Durham School of Architectural Engineering and Construction: Faculty Publications

Recently, the requirement to continuously collect bioaerosol samples using shorter response times has called for the use of real-time detection. The decreased cost of this technology makes it available for a wider application than military use, and makes it accessible to pharmaceutical and academic research. In this case study, real-time bioaerosol monitors (RBMs) were applied in elementary school classrooms—a densely occupied environment—along with upper-room ultraviolet germicidal irradiation (UVGI) devices. The classrooms were separated into a UVGI group and a non-UVGI control group. Fluorescent bioaerosol counts (FBCs) were monitored on 20 visiting days over a four-month period. The classroom with upper-room …

Social Sustainability Indicators In Mass Housing Construction, Ali Karji, Asregedew Woldesenbet, Mostafa Khanzadi

Durham School of Architectural Engineering and Construction: Faculty Publications

In the construction industry, buildings constitute more than half of the new construction built in the world. With the rapid growth of population in urban areas and high-energy consumption of buildings, considerable attention and efforts have been devoted to creating a sustainably built environment. As a result, various sustainable rating systems, principles and tools have been developed in recent years. This paper presents efforts underway for evaluation of sustainability in mass housing construction projects in the Middle East from a social aspect. The study reviews reports, guidelines and best practices at national and international levels to detect key sustainability indicators. …

Heat - Pump System With Refrigerant Charge Diagnostics, Fadi M. Alsaleem, Gregg H. Hemmelgarn

Durham School of Architectural Engineering and Construction: Faculty Publications

A heat-pump circuit may include an indoor heat exchanger, an outdoor heat exchanger, a compressor adapted to circulate a working fluid between the indoor and outdoor heat exchangers, and an expansion device disposed between the indoor and outdoor heat exchangers. A monitor for the heat-pump system may include a return-air temperature sensor, a supply-air temperature sensor, and a processor. The return-air temperature sensor may be adapted to measure a first air temperature of air upstream of the indoor heat exchanger. The supply-air temperature sensor may be adapted to measure a second air temperature of air down stream of the indoor …

Bs News January/February

Building Services Engineering

No abstract provided.

Impact Of Clip Connection And Insulation Thickness On Bracing Of Purlins In Standing Seam Roof Systems, Michael W. Seek, Daniel Mclaughlin

Engineering Technology Faculty Publications

The flexural strength of purlins in standing seam roof systems is highly dependent upon the extent to which the sheathing provides lateral and torsional restraint. Typical models to predict the restraint provided by the sheathing assume that the plane of lateral resistance occurs at the top flange of the purlin. In reality, depending on the configuration of the clip and the amount of insulation located between the purlin and the clip, the plane of lateral resistance and corresponding center of rotation shifts above the top flange. This distance, referred to as the effective standoff, is important to evaluate the effectiveness …

Tender Procedure For Traditionally Procured Building Contracts In Ireland, Tony Cunningham

Other Resources

The process of tendering for construction contracts is an expensive process, particularly where contracts are large and/or complex or involve partial, or total, contractor design. The underlying philosophy guiding best practice in tendering procedure is that of ensuring fair play among the tendering contractors. Tenders for building contracts may be obtained using a range of approaches. This study examines best practice in tendering procedure for building contracts in the private and public sectors in Ireland and focuses in particular on the procedures to be carried out under open and selective/restricted tendering approaches.

The study identifies where open tendering and selective …

The Impact Of Project Delivery Methods On Dispute Occurrence In Public Highway Projects, Samaneh Nasrollahi, Ghada M. Gad, Alan Atalah

Master of Technology Management Plan II Graduate Projects

The construction industry is a complex and competitive industry in which different participants with different expertise, talents, and levels of knowledge work together to achieve their objectives and complete a project. Sine different participants with different interest involve in a construction project, therefore, conflicts arise and become inevitable. Conflicts in projects will cause an adversarial environment which result to disputes. Hence, if conflicts are not well managed and resolved in a timely manner, they quickly turn into disputes, which prevent the successful completion of the construction project, in terms of cost and time, and increasing the potential for poor project …

An Introduction To Building Contracts: An Irish Context, Tony Cunningham

Other Resources

A contract is an agreement which is capable of being enforced at law and whose essential characteristic is that of a bargain. Contract law focuses predominantly on commercial transactions and in the construction context these range from simple every-day transactions such as purchasing a box of nails to procuring multi-million euro building facilities. In Ireland construction clients typically engage designers and quantity surveyors to formulate designs and they subsequently contract with building contractors to construct the designs. The contractors, in turn, typically outsource much of the work to subcontractors and order materials from numerous suppliers. All of these activities involve …

Ua66 Ogden College Of Science & Engineering Newsletter, Wku Ogden College Of Science & Engineering

Ogden College of Science & Engineering Publications

Newsletter created by and about WKU Ogden College of Science & Engineering.

• Ogden College Hall Taking Shape on TIme & on Budget
• Alumni Focus: Dr. Talia McKinney Collins
• WKU Research Foundation Launches New Website
• French, Jackson. Stemshot Rocketry Competition
• Agriculture
• Architectural & Manufacturing Sciences
• Grants & Publications
• Dr. Noah Ashley Receives NIH Grant
• Biology - News & Notes
• WKU Chemistry Welcomes Dr. Lawrence Hill & Dr. David Wolfgang
• Gary Kwong Receives McNally Award
• Student Teams Compete in National Engineering Contests Over the Summer
• Geology Major Conducts Research in Ethiopia - Deborah Flynn
• Geography & Geology
• WKU Meterology Launches White Squirrel …

Kihefo Vocational Center: Kabale, Uganda, Jason Matthew Angerer

Construction Management

Journeyman International (JI) is a non-profit organization which acts as a platform for bringing together volunteer Architects, Designers, Engineers, and Construction Managers with humanitarian projects around the world. Kigezi Healthcare Foundation (KIHEFO) a non-profit NGO located in Kabale, Uganda is a client seeking to build a vocational center to educate the workforce of Uganda. The center will include multi-purpose class rooms, a dining hall, rabbit farm, carpentry shop, and living complex. The Architect on the project was Courtney Wedel from Cal Poly. As the Construction Manager on the project my responsibilities include; Design Assist, Feasibility Analysis, Scheduling, Estimating, and Managing …

Bs News November/December

Building Services Engineering

No abstract provided.

International Construction Measurement Standard, Charles Mitchell

Other Resources

The International Construction Measurement Standard Coalition (the Coalition) was formed on 17 June 2015 after meeting at the International Monetary Fund in Washington DC, USA. The Coalition, comprising the organisations listed below at the date of publication, aims to bring about consistency in construction cost reporting standards internationally. This is achieved by the creation and adoption of this ICMS, an agreed international standard for the structuring and presentation of cost reports. ICMS sets out a structure for describing construction costs in terms of project scope, attributes and values descriptors. This document setting out the provisions of ICMS is the first …

How Acoustics In California High Performance Schools Relate To Student Achievement, Devin K. Wong

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

This research project seeks to determine if students attending K–12 schools meeting a minimum standard of high performance classroom conditions in the state of California do evidence higher scholastic achievement, based on publically available results on state-wide standardized tests. In three phases, a subset of 200+ schools applying for grants dedicated to building high performance schools over the past decade was correlated with an existing database of achievement scores for all public schools in California. The criteria utilized to specify high performance classrooms was provided by the California High Performance Initiative (HPI) Grant program. Academic achievement was evaluated on a …

Mother's Room - Design | Build, Zoey Koester, Shelby Orr, Damian Smith, Andrew Estabrook, Sarah Barth, Caroline Simmons

ASA Multidisciplinary Research Symposium

The lack of a comfortable environment for mothers on campus was challenged by the Non-Traditional Student Services department of a public university this past year. The department recruited a team of architecture, interior-design, and construction management faculty and students to design and build a mother’s room for the campus library.

Buildings As An Assembly Of 3d Printed Components, Stephen S. Lauer

ASA Multidisciplinary Research Symposium

This project aimed to design a series of components that would be assembled to become a house. The design is a house that is printed in a series of modules and assembled using a series of printed connectors for not only attaching the modules but also used in other various details.

Influence Of Ground Granulated Blastfurnace Slag On The Thermal Properties Of Pcm-Concrete Composite Panels, Dervilla Niall, Oliver Kinnane, Roger P. West, Sarah Mccormack

Conference papers

The thermal mass of concrete within a building can be used as an energy storage system and hence reduce the demand on the auxiliary heating and cooling systems in the building. The heat storage capacity of concrete can be enhanced by adding phase change materials (PCMs) which provide a high latent heat storage capacity. However the addition of PCM to concrete reduces the conductivity of the concrete due to the low conductivity of the PCMs. This hinders the efficient utilisation of the additional heat storage capacity provided by the PCM.

It is generally understood that the use of ground granulated …

Case Study Of Quantifying Energy Loss Through Ceiling-Attic Recessed Lighting Fixtures Through 3d Numerical Simulation, Ri Na, Shengmao Lin, Zhigang Shen, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

Abstract Air leakage through recessed lighting fixtures has been identified as a common issue that causes extra energy consumption in residential buildings. However, few quantitative studies in this area were found. As such, a preliminary assessment of the magnitude of this type of energy loss was conducted by using three-dimensional (3D) transient computational fluid dynamics (CFD) models. A hypothetical layout of recessed lighting fixtures was designed with boundary conditions of four different seasons, which were obtained from recorded roof/attic temperature data sets. The results of the study indicate that leakage of recessed lighting fixtures could be a significant channel of …

In Situ Thermal Transmittance Of Case Studies In Dublin., Cormac Flood, Lloyd Scott, William Gleeson

Conference papers

Thermal transmittance (U-values) of exterior walls represent a source of uncertainty when estimating the energy performance of dwellings. It has been noted in research that the standard calculation methodology for thermal transmittance should be improved. Subsequently, hygrothermal analysis has been used as an accurate building design tool due to its incorporation of climate specific effects on construction assemblies such as moisture retention and release. In-situ measurement of thermal transmittance could also be an effective tool for evaluating the material performance of assemblies of a building. This paper provides the context, research process and analysis of 3 case studies situated in …