Construction Engineering Commons^™

What Causes Cost Overruns On Building Projects? - An Overview., Tony Cunningham

Other Resources

Cost overruns are commonplace during the construction phase of building projects. This study investigates common reasons why cost overruns happen on building projects. It examines how the client’s priorities and decisions regarding the project duration and quality expectations can undermine cost certainty. The actions of the client’s consultants, particularly those of the architect / employer’s representative, are identified as key factors in causing or preventing cost overruns. The building process, itself, is uncertain, particularly in relation to ground conditions. Large, complex and innovative construction projects containing a substantial element of specialist work are identified as ones which are particularly prone …

How Tonality And Loudness Of Noise Relate To Annoyance And Task Performance” Noise Control Eng. J. 65(2), 71-82., Joonhee Lee, Jennifer M. Francis, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Audible tones in noise generated by building mechanical equipment can be a leading cause of complaints from occupants. A number of metrics have been developed to quantify prominence of a tone, but previous work has shown that the impact of a certain tonality appears to vary with the level of the broadband noise signal. More work on how tonal signals of varying tonality, tone frequency and broadband noise levels relate to annoyance and task performance is needed. This paper investigates such relationships between current noise metrics, annoyance and task performance under assorted tonal noise conditions through subjective testing. Participants rated …

The Professional Constructor, Full Issue, Volume 42, Number 01

The Professional Constructor

No abstract provided.

The Construction Contracts Act 2013 – An Overview, Tony Cunningham

Other Resources

It is absolutely fundamental to trust within the construction industry that participants should be paid for the work which they have undertaken – Sir Michael Latham

The Construction Contracts Act 2013, in essence, deals with the timing of, amount of, and enforcement procedures for payments within the Irish construction industry. The Act was introduced to redress a perceived power imbalance between main contractors and sub-contractors which fostered poor payment practices. The Act establishes a formal payment process which may be enforced by aggrieved parties who claim they have not been paid on time or in full, through suspending the works …

Using Percent Complete Metric To Highlight The Root Causes Of Delays In Home Building Industry, Somik Ghosh

The Professional Constructor

Based on the prediction of US Housing and Urban Development (US HUD), the demand for new homes will increase in the coming months to accompany the steady sales of existing homes. To meet the future demand, the home building industry has to continuously improve and get rid of inherent problems such as frequent delays. While delays have been a common occurrence in the residential and commercial construction alike, investigations of delays in the residential sector has not received much attention. With the goal of exploring the causes of delays in the home building industry, a multiple case study approach was …

Are We On The Same Jobsite? The Millennial Generation Vs. Construction Industry Employees, Christine Piper, Varahee Madadi

The Professional Constructor

This paper gives an overview of a study conducted in a geographical area of the US to understand the millennial generation’s perception of the workplace of the construction industry. Many organizations face the challenge of integrating diverse generations in a workplace. With the retirement of a large number of Boomers and the current intake of Millennials in the workplace, organizations are facing a challenge to attract and retain the millennial generation. Workplace expectations of the millennial generation and employees are compared with the expectations of the workplace amongst different generations in the construction industry.

Math Skills That Don’T Add Up; A Comparison Between Eighth Grade And College Students, Nathan Barry, Angela Hollman, Dale Porter

The Professional Constructor

Among 34 participating countries within the Organization for Economic Cooperation and Development (OECD), the United States performed below average in mathematics earning a rank of 27. The World Economic Forum (2014) ranks the United States 51 out of 144 countries scoring a 4.4 out of 7 (7 = excellent) in the quality of mathematics and science education. Although the United States’ competitive advantage and economic growth is directly connected to science, technology, engineering, and math (STEM) careers, only 28 percent of those students choose to major with these fields in college. In addition, 48 percent of students that choose to …

Clothedral, Jacob T. Holmes, Andres Munoz, Sam Tenreiro Theis, Marta Blachowicz

Architectural Engineering

No abstract provided.

A Laboratory Evaluation Of Warm Mix Technology For Use In Asphalt Rubber - Asphaltic Concrete Friction Courses: A Case Study Of Arizona, Michael Myung Jeong, Douglas I. Hanson

The Professional Constructor

The objective of this study was to determine if warm mix additives currently used in Arizona can be added for the production of an Asphalt Rubber - Asphaltic Concrete Friction Course (AR-ACFC) without detrimental effects on performance of the pavement. Three warm mix additives (Evotherm®, Sasobit®, and Advera®) approved by Arizona Department of Transportation were investigated through a laboratory study along with statistical analysis. Three major concerns on performance of an AR-ACFC considered in this study are asphalt draindown, durability, and moisture susceptibility. The laboratory binder test results show there is no clear evidence that the use of Evotherm and …

How U.S. Universities Intend To Meet Their Carbon Neutral Goals, Dennis C. Bausman, Avinash Venugopal

The Professional Constructor

Universities have been on the leading edge for implementation of sustainable practices, green building certification, and the push to limit emission of greenhouse gases. In 2006 leadership at twelve universities was instrumental in the creation of the American College & University Presidents’ Climate Commitment (ACUPCC). The two overall goals of the ACUPCC were to gain university commitment to eliminate greenhouse gas emissions from their campus operations and to promote sustainability education and research. A decade later there are over 650 that have officially pledged their support to the ACUPCC and in doing so have established a goal toward carbon neutrality …

Irish Bim Study 2017, Barry Mcauley, Alan Hore, Roger West

Articles

The Construction IT Alliance (CitA) recently published its Global BIM Study as part of its BIM Innovation Capability Programme (BICP). The study sought to identify how BIM was being currently addressed in 27 countries across the globe. The study sought to identify the presence of three key ingredients in these countries:

1. Regulatory requirement for BIM

2. Champions driving BIM

3. Noteworthy publications

The report identified a number of recurring themes that would help to shape Ireland’s BIM programme. The report concluded that Ireland should adopt a programme of partnership between industry and the Irish Government in order to affect …

Bs News March/April

Building Services Engineering

No abstract provided.

Bicp Global Bim Study - Lessons For Ireland’S Bim Programme, Barry Mcauley, Alan Hore, Roger West

Reports

The Construction IT Alliance (CitA) has been promoting the benefits of digitisation in the construction and engineering industry in Ireland since its formation back in 2002. Whilst the Alliance has always strived to ensure that its members are exposed to a wide spectrum of contemporary digital tools and processes, the concept of Building Information Modelling (BIM) has dominated the focus of its activities over the past five years.

BIM can be described as a digital tool that facilitates everybody to better understand a building or structure through the use of a digital model which draws on a range of data …

Bau, January 17-21, Munich, Jim Roche

Other resources

This bi-annual five-day event is one of the

leading and biggest trade fares of architecture,

materials, building systems and craft skills in

the world. Held in the huge Messe München

Trade Fair Center in eastern Munich and

stretching over 17 gigantic halls each the size

of a football pitch, it offers a truly rich display of

the latest innovations in building technology.

Research On Control Methods Of Roof Radiant Cooling System, Yongbin Li, Zhaoyi Zhuang, Qiqi Zhu, Jian Song, Haipeng An

Durham School of Architectural Engineering and Construction: Faculty Publications

Taking the capillary ceiling radiation air conditioning system in radiation cooling Laboratory of comprehensive experimental building in Shandong Jianzhu University as an example, research the two different control methods which are room temperature control and water temperature control. The roof cooling model was established by using TRNSYS simulation software, two typical summer days were selected to explore the stability of the room temperature and the supply and return water temperature, research the comfort of human body and system energy consumption under two control methods. The results show that the indoor temperature of the two control methods can be stable at …

Gas Generation, Haorong Li, Daihong Yu, Yanshun Yu

Durham School of Architectural Engineering and Construction: Faculty Publications

A first system includes a feedstock load port and a feedstock discharge port. The first system also includes a tank configured to retain biomass feedstock for aerobic biodegradation. The first system further includes a mechanical ventilator in fluid communication with the tank. The mechanical ventilator is configured to supply air to facilitate the aerobic biodegradation of the biomass feedstock. The first system also includes an exhaust port configured to receive gas generated during the aerobic biodegradation. A second system includes a feedstock load port and a feedstock discharge port. The second system also includes a pressure vessel configured to retain …

Compact Facility For Testing Steady And Transient Thermal Performance Of Building Walls, Aimee Byrne, Gerard Byrne, Anthony Robinson

Articles

Energy efficiency retrofit of buildings represents a key effort in reducing EU energy demand by 20% by 2020. However, predictions tend to overestimate savings by large percentages. The shortfall in savings can be attributed to incorrect predictive techniques, comfort takeback along with other behavioural and workmanship variables. Common predictive techniques related to heat loss tend to be based on the U-value of the building envelope. This paper presents the design of a more straightforward and compact version of the traditional Hot-Box apparatus (measures U-value) which instead determines the thermal resistance of samples of building envelope. U-value includes the need to …

Study On The Methods For Predicting The Performance Of A Hybrid Solar-Assisted Ground-Source Heat Pump System, Zhaoyi Zhuang, Qiqi Zhu, Jian Song, Xin Zhang, Haorong Li

Durham School of Architectural Engineering and Construction: Faculty Publications

It is critical to find suitable setting parameters for designing a hybrid solar-assisted ground-source heat pump system in the practical engineering application, but the heat pump performance is unpredictable after many years of operation. This paper used 2000 sets of performance data collected from solar-assisted GSHP systems that keep operating over 20 years to simulate long term used heat pump with a professional software called GeoStar. Adopted the classification and regression tree (CART) method, the design of solar energy collector areas can be predicted. The multi-linear regression is also utilized to predict average monthly per meter borehole heat exchange. Seasonal …

Research On The Cooling Characteristics In Building Interior Zones Using Displacement Ventilation System, Zhaoyi Zhuang, Yongbin Li, Qiqi Zhu, Jian Song, Haipeng An, Haorong Li

Durham School of Architectural Engineering and Construction: Faculty Publications

The outdoor low temperature fresh air can be used as a free cold source to eliminate waste heat for the building interior zones during the transition season and winter. This paper takes a project in Hunan as an example, and the project building interior zones is 25m×7m×3.9m(L×W×H). Using Fluent software to simulate the temperature field and velocity field both the interior and exterior zones of the engineering offices. The simulation results show that using the displacement ventilation system to take the outdoor air into inner rooms not only cooling but also improving the air quality and adding comfort. According to …

Performance And Energy Efficiency Analysis Of Data Center Cooling Plant By Using Lake Water Source, Li Ling, Quan Zhang, Liping Zeng

Durham School of Architectural Engineering and Construction: Faculty Publications

A cooling plant by using lake water source was proposed to cool the space in data centers. It combines free cooling technology and variable capacity technology to remove heat and reduce energy consumption effectively. In this paper, firstly, the control strategies for this cooling plant were proposed. Then, a detailed annual energy consumption model with considering the effect of the dynamic heat dissipation characteristics of servers, lake water temperature, outdoor weather conditions, and cooling plant thermal performance, will be established to evaluate the performance and energy efficiency of this cooling plant under different load factors. The results show the mode …