Distribution Fitting And Anova Test To Analyze Pavement Sensing Patterns For Condition Assessments, Dada Zhang, Chun-Hsing Ho

Durham School of Architectural Engineering and Construction: Faculty Publications

Purpose – The purpose of this paper is to investigate the vehicle-based sensor effect and pavement temperature on road condition assessment, as well as to compute a threshold value for the classification of pavement conditions.

Design/methodology/approach – Four sensors were placed on the vehicle’s control arms and one inside the vehicle to collect vibration acceleration data for analysis. The Analysis of Variance (ANOVA) tests were performed to diagnose the effect of the vehicle-based sensors’ placement in the field. To classify road conditions and identify pavement distress (point of interest), the probability distribution was applied based on the magnitude values of …

Efficacy Of Passive Ventilation With High Exhaust Demands: A Case Study Of Cal Poly Sst, Siddarth Bokka

Construction Management

The Simpson Strong Tie Demonstration Laboratory serves as a multipurpose space allowing students at the College of Architecture and Environmental Design at California Polytechnic State University to build full scale construction projects. The building features a material storage area, a high bay for construction of full-scale projects, and a mezzanine level that houses digital fabrication equipment. However, the building was never designed to house the specific equipment currently installed on the mezzanine and ventilate the exhaust fumes from them. Rather, the building relies on passive natural ventilation that is likely ineffective at properly exhausting hazardous fumes, resulting in complaints from …

Sustainability Of Apparel Exporting Industry Facilities In South Asia, Sree L. Anilkuma, George H. Berghorn, M.G. Matt Syal

The Professional Constructor

The apparel industry’s contribution to the gross domestic product in South Asian countries is significant and provides livelihoods for millions of people in this region. Although this industry’s contribution towards the economy is substantial, its negative impact on the environment and the working conditions have always been critical issues of concern. The two countries of emphasis in this research, Bangladesh, and India, have experienced numerous garment factory accidents in the form of building collapses, factory fires, and boiler explosions, which have killed and injured thousands of workers. These incidents have brought attention on the need to improve poor facilities and …

Taxonomy Of Trust And Maslow’S Hierarchy Of Needsin The Construction Industry, Ann B. Lyons, Vivek Sharma, Shima Clarke

The Professional Constructor

Trust is vital in every facet of life, enabling collaborative efforts and valuing contributions from various individuals. This is particularly true in the construction industry, where teamwork is essential for success. Prior research has consistently demonstrated that heightened trust levels significantly contribute to better project outcomes and increased client satisfaction. Despite its critical role, the construction industry has yet to adopt a structured hierarchical perspective of trust that aligns with its unique demands. This study aims to fill this gap by validating a comprehensive taxonomy of trust specifically designed for the construction sector. Through literature review, this study identifies key …

Building Services Engineering March/April 2024

Building Services Engineering

No abstract provided.

The Professional Constructor, Full Issue, Volume 49, Number 01

The Professional Constructor

No abstract provided.

Mixed Reality For In-Field Construction Activities: A Systematic Literature Review To Identify Challenges And Solutions, Sumanth Sai. P., Jason Lucas

The Professional Constructor

With the new industrial revolution, “Industry 4.0,” it is important to understand and incorporate the new standards and technologies evolving in the market. Industry 4.0 relies on the integrated use of big data and analytics coupled with various technologies to help make decisions and manage projects. This revolution has brought Mixed Reality (MR) into the construction field. Mixed reality (MR) offers significant benefits for smart industries, such as enhancing productivity, training, manufacturing, error correction, assembly, and packaging processes. But how feasible are Mixed Reality Technologies (MRTs) considering the high initial investment required for acquiring devices, subscribing to services, planning and …

Computer-Integrated Construction Management With Procore, Vedanth Ashoka, M.G. Matt Syal

The Professional Constructor

The construction industry faces difficulties in managing the enormous amounts of data generated at each stage of a project, impacting project coordination and decision-making. Currently the industry is facing the issue of a lack of interoperability among the multiple software programs being used for different functions. To address this lack of interoperability, there is a need for an integrated environment that allows seamless flow of data between different functions. Among the few software tools that have emerged in recent year, Procore, a cloud-based construction project management software, has emerged as a widely used solution in the industry, enabling collaboration among …

Root And Causes Of Skilled Labor Shortage In Construction Industry: Comprehensive Literature Review, Nicholas Hardy, Carolina Barbosa-Resende, James Kereri, Arash Taghinezhad

The Professional Constructor

The skilled labor shortage is well documented from a historical perspective via studies focusing various construction trades such as carpentry, mechanical, electric and plumbing, and tile setters. Causes of such shortages such as industry image, college as a preferred choice after high school, and construction being a last resort have been investigated extensively. Consequently, possible solutions ranging from amplifying shop classes in high school to intensifying recruiting efforts for union training programs have all been addressed throughout the last 40 years. However, recent studies have focused on identifying the magnitude and reach of the skilled labor gap while limited attention …

Evolvement Of Excusable Delay Clauses In Government Contracts Since The Covid-19 Pandemic, Jung Hyun Lee, Yunping Liang, Seyed Mohammad Ehsan Tabatabaee, Bryce Riccitelli

Durham School of Architectural Engineering and Construction: Faculty Publications

Excusable delay clauses in government construction contracts, often considered boilerplate with minimal modifications, have increased in attention since the outbreak of COVID-19. Despite the studies enumerating triggering events of the clause in the background of the pandemic, it is necessary to capture insights into how the unprecedented event is systematically accommodated by contract languages. The overarching goal of this study is to identify changes in contract languages over the pre-and post-pandemic eras by state departments of transportation (DOTs), focusing on excusable delay clauses. This study conducts a content analysis and a comparative analysis of state DOT construction contract documents, including …

Towards A Sustainable Model For Finishing Materials In Mixed-Use Gated Community Buildings, Dina Mohamed Shawky Ismail

Theses and Dissertations

ABSTRACT

The concept of sustainability has recently become widespread, and most industries attempt to fulfill all requirements to qualify as sustainable. The construction industry is a prime polluting activity that contributes significantly to carbon dioxide (CO₂) emissions. Moreover, use of specific finishing materials such as paint and coatings adds to the emission of volatile organic compounds (VOC) which are extremely harmful to the human health. Hence, proper choice of building and finishing materials can potentially reduce such emissions and takes the building a step closer to qualify a building as a sustainable one. While the construction industry in …

Synthesis And Characterization Of Cellulose Microfibril-Reinforced Polyvinyl Alcohol Biodegradable Composites, Fatemeh Mahdiyeh-Boroujeni, Gabriella Fioravanti, Ronald Kander

School of Design and Engineering Papers

The pursuit of an environmentally sustainable manufacturing process requires the substitution of less damaging and recyclable solutions for harmful reagents. This study aims to assess the effectiveness of using cellulose microfibrils synthesized via different hydrolysis reactions as reinforcing agents in polyvinyl alcohol (PVA) at varying concentrations. The investigation explores the morphology, thermal properties, and chemical behavior of the cellulose particles. The cellulose microfibrils (CMFs) produced using citric acid exhibited the highest yield and aspect ratio. Notably, particles from organic acids demonstrated greater thermal stability, with oxalic acid-derived particles displaying the maximum thermal degradation temperature. Subsequently, cast films of PVA reinforced …

Visual Privacy As An Approach To Improve Human Needs In Residential Buildings In Egypt, Inas Samir Ibrahim, Walaa Nour, Mustafa Alwan

Journal of Engineering Research

Architecture reflects a nation’s cultural, social, and environmental characteristics. As a result of the recent globalization, countries have lost their distinctive architectural identities; due to this, it is difficult to identify A country’s unique identity locally and regionally. Specifically, in Egypt, houses in the traditional style are considered one of the most iconic architectural styles. There is an amazing local identity and a unique spatial quality in the region that characterizes Egypt. On the other hand, Western influences have caused many of the values and attributes of houses to fade. One of the most prominent values is the home’s loss …

The Effect Of Building Information Modeling Technology On The Future Of Architecture Education Development In Universities, Mohamed Abd Elnaser Hamoda, Mahmoud Ahmed Zaki, Marwa Ahmed Kamer Faculty Of Engineering, Tanta University

Journal of Engineering Research

At the beginning of the current century , and with the development of computer technology , a new system based on three-dimensional drawings and modeling appeared with an accurate definition and description of all the elements in the submitted design , with the big development of construction methods and the advancement of the related technology and software, the advantages of the new system were defined and became more specific and relied in many organizations , companies and in design and construction institutions , and this system was called the building information modeling (BIM) .

Despite the importance of the system …

Opportunities And Challenges Of Generative Ai In Construction Industry: Focusing On Adoption Of Text-Based Models, Prashnna Ghimire, Kyungki Kim, Manoj Acharya

Durham School of Architectural Engineering and Construction: Faculty Publications

In the last decade, despite rapid advancements in artificial intelligence (AI) transforming many industry practices, construction largely lags in adoption. Recently, the emergence and rapid adoption of advanced large language models (LLMs) like OpenAI’s GPT, Google’s PaLM, and Meta’s Llama have shown great potential and sparked considerable global interest. However, the current surge lacks a study investigating the opportunities and challenges of implementing Generative AI (GenAI) in the construction sector, creating a critical knowledge gap for researchers and practitioners. This underlines the necessity to explore the prospects and complexities of GenAI integration. Bridging this gap is fundamental to optimizing GenAI’s …

Diagnosis Of Disease Affecting Gait With A Body Acceleration‑Based Model Using Reflected Marker Data For Training And A Wearable Accelerometer For Implementation, Mohammad Ali Takallou, Farahnaz Fallahtafti, Mahdi Hassan, Ali Al‑Ramini, Basheer Qolomany, Iraklis I. Pipinos, Sara A. Myers, F. M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper demonstrates the value of a framework for processing data on body acceleration as a uniquely valuable tool for diagnosing diseases that affect gait early. As a case study, we used this model to identify individuals with peripheral artery disease (PAD) and distinguish them from those without PAD. The framework uses acceleration data extracted from anatomical reflective markers placed in different body locations to train the diagnostic models and a wearable accelerometer carried at the waist for validation. Reflective marker data have been used for decades in studies evaluating and monitoring human gait. They are widely available for many …

Project Stakeholder Analysis In Temadore Bridge Construction Development, Hud Rafsanjani, Ayomi Dita Rarasati

Smart City

The construction of bridge is important due to its ability to link communities through land-road connection, thereby saving time and increasing productivity of those living in these areas. Therefore, this research evaluated the Temadore bridge, built to link Ternate City, Maitara land and Tidore City by road to enhance movement and reduce disparities in assessing both areas. Data were collected using the Interpretative Structural Modeling (ISM) which searched for and identified several variables according to the dependence power and driving power. The result showed that construction of bridge increased the movement of community activities and productivity, thereby leading to growth.

Project Control System (Pcs) Implementation In Engineering And Construction Projects: An Empirical Study In Saudi's Petroleum And Chemical Industry, Sahar Jawad, Ann Ledwith, Rashid Khan

School of Cybersecurity Faculty Publications

Purpose

There is growing recognition that effective project control systems (PCS) are critical to the success of projects. The relationship between the individual elements of PCS and successfully achieving project objectives has yet to be explored. This research investigates the enablers and barriers that influence the elements of PCS success and drive project objectives.

Design/methodology/approach

This study adopts a mixed approach of descriptive analysis and regression models to explore the impact of six PCS elements on project outcomes. Petroleum and chemical projects in Saudi Arabia were selected as a case study to validate the research model.

Findings

Data from a …

Building Services Engineering January/February 2024

Building Services Engineering

No abstract provided.

Assessing Indoor Temperature Control Using Different Materials And Designs, Amany G. Micheal Prof.

Architectural Engineering

Controlling indoor temperature in buildings is gaining much importance. This is attributed to the increasing awareness around the world of the mandate reduction in fossil fuel consumption to produce electricity necessary to control temperature inside buildings. This research studies the potential to improve the indoor environment of buildings using different materials either insulators or incorporated inside a building and façade design. The study involves phase changing materials (PCM), thermal insulation materials and façade shading and design. Thermal insulation materials include mineral wool and polystyrene boards, which are the most popular insulators in arid countries. Wood cladding influence on the indoor …