Architectural Engineering Commons^™

A Prediction Method For Overall Economic Value Of Fault Detection And Diagnostic Tools For Rooftop And Split Systems, David Yuill, James Braun

Durham School of Architectural Engineering and Construction: Faculty Publications

Fault detection and diagnostics (FDD) tools for air-conditioning application may perform well or poorly, but it is difficult to characterize this performance in a meaningful way. Some recently proposed evaluation techniques have provided various statistics to characterize FDD performance, but these results can be difficult for a potential adopter of FDD to understand. A new method of characterizing FDD performance by predicting the overall economic value of the FDD tool is proposed in this paper. It is applicable to FDD tools intended for air-cooled unitary airconditioners, such as rooftop units (RTU) and split systems. The method gives an estimated dollar …

Identification Of Key Performance Tasks To Demonstrate The Benefit Of Introducing The Facilities Manager At An Early Stage In The Building Information Modelling Process On Public Sector Projects In Ireland., Barry Mcauley

Doctoral

Modelling (BIM) governed process was investigated in this thesis. Governments are now seeking a more rewarding methodology in the management and procurement of public sector building assets. This has seen an integrated focus by International Governments on BIM as a partial solution in both managing and procuring public sector building assets. Despite BIM bringing the Facility Manager closer to project conceptualisation, there was still a reluctance and a lack of perceived benefits of having them involved earlier in the design phase. There remains a lack of clear evidence on what improved contribution the Facilities Manager can provide. This thesis provides …

Normalized Effect Of Condenser Fouling And Refrigerant Charge On Performance Of Vapor Compression Air Conditioning Systems, Mehdi Mehrabi, David Yuill

Durham School of Architectural Engineering and Construction: Faculty Publications

Several laboratory experiments have studied the effect of faults on vapor compression cycle air-conditioning systems. There has been a particular focus on refrigerant charge variation, which is believed to be quite common in air conditioners, and a lesser focus on heat exchanger fouling. The majority of the published results evaluate the fault effects on particular system operating parameters in one unit. For example, the effect on capacity and efficiency are typically evaluated. The results differ from one study to the next. The current paper summarizes the effects for all of the results available in the literature for condenser fouling and …

A Thermo-Activated Wall For Load Reduction And Supplementary Cooling With Free To Low-Cost Thermal Water, Yuebin Yu, Fuxin Niu, Heinz-Axel Guo, Denchai Woradechjumroen

Durham School of Architectural Engineering and Construction: Faculty Publications

A building envelope serves as a thermal barrier and plays an important role in determining the amount of energy used to achieve a comfortable indoor environment. Conventionally, it is constructed and treated as a passive component in a building thermal energy system. In this article, a novel, mini-tube capillary-network embedded and thermal-water activated building envelope is proposed to turn the passive component into active, therefore broaden the direct utilization of low-grade thermal energy in buildings. With this proposed approach, low-grade thermal water at a medium temperature close to the ambient environment can be potentially utilized to either counterbalance the thermal …

Student Absenteeism And The Comparisons Of Two Sampling Procedures For Culturable Bioaerosol Measurement In Classrooms With And Without Upper Room Ultraviolet Germicidal Irradiation Devices, Chunxiao Su, Josephine Lau, Shawn G. Gibbs

Durham School of Architectural Engineering and Construction: Faculty Publications

Upper room ultraviolet germicidal irradiance (UVGI) has been shown to reduce the concentration of bioaerosols in controlled chambers. However, there is a lack of experimental results on the reduction of bioaerosol concentrations by UVGI devices in actual uncontrolled buildings. This study was carried out in an American elementary school in the Midwest. Two sampling procedures were carried out in six selected classrooms with similar dimensions that were separated into two groups: (1) UVGI exposure group and (2) non-UVGI control group. Two-stage Tisch culturable impactors were utilized to collect airborne culturable bacteria and fungi. Monthly samples were collected during unoccupied period …

Fault Detection And Diagnosis Process For Oversizing Design On Multiple Packaged Air-Conditioning Units, Denchai Woradechjumroen, Haorong Li, Thanapat Promwattanapakee

Durham School of Architectural Engineering and Construction: Faculty Publications

Heating, ventilation, air-conditioning and Refrigeration (HVAC&R) systems are seldom designed or commissioned properly. The situation leads to abrupt or degradation faults resulting in inefficient energy uses, excessive energy consumption and high service costs. To solve these aforementioned problems, fault detection and diagnosis (FDD) is utilized to firstly detect any abnormal conditions of a system and then diagnoses and determines their causes. In order to apply this concept in HVAC oversizing designs, this paper proposes the state-of-art procedure of a FDD procedure for analyzing the inherently faulty design (oversizing) of multiple packaged air-conditioning units used to supply cooling for an open …

Compressor Having A Control And Dagnostic Module, Hung M. Pham, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

An apparatus includes a Voltage sensor, a current sensor, and a controller. The Voltage sensor measures Voltage values of alternating current power Supplied to a capacitor. The capaci tor is electrically coupled to a compressor. The current sensor measures current values of the alternating current power. The controller is configured to receive the Voltage values and the current values. The controller is configured to determine a first power factor value based on at least one of the voltage values and at least one of the current values. The controller is configured to selectively detect a first capacitor fault in response …

Geotechnical State-Of-The-Art In Guatemala -- Ground Stabilization, Fernando Rafael Callejas Benitez

Doctoral Dissertations

"History provides an understanding of the present and in a way, a guide for the future. The state-of-the-art is often referred to as a snapshot of the most significant works and contributions made in a field of study; In this case the focus is on Guatemalan geotechnical engineering. This study presents a comprehensive description of the different events that impulse geotechnical engineering in Guatemala.

As part of the description of the state-of-the-practice an investigation of the different human (engineers/contractors) and physical resources (laboratories/field equipment) and their capabilities are presented. An overview of the civil engineering programs is presented. Then, the …

Influence Of The Substrate Characteristics On The Bond Behavior Of Pbo Frcm-Concrete Joints, Tommaso D'Antino, Lesley H. Sneed, Christian Carloni, Carlo Pellegrino

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Fiber Reinforced Cementitious Matrix (FRCM) composites can be employed as a valid alternative to Fiber Reinforced Polymers (FRP) composites for strengthening existing reinforced concrete (RC) structures. The weakness of FRCM-concrete joints has been reported to be at the matrix-fiber interface rather than within the concrete substrate, as is usually reported in the case of FRP-concrete joints. The experimental investigations regarding FRCM strengthening available in the literature have been performed by applying the FRCM composite onto a surface that was treated before the application, usually by grinding or sandblasting. However, the role of the substrate characteristics on the failure mechanism of …

Dispute Resolution Under The Principal Irish Forms Of Building Contract, Tony Cunningham

Other Resources

The construction industry is known to be litigious (Latham, 1994). This is hardly surprising given the industry’s fragmented nature in which project teams comprising an extensive network of employers, designers and constructors are brought together to deliver once-off projects, following which, the organisation is almost always disbanded. The short term objectives of the various groupings are often competing and occasionally incompatible. For example, many employers will wish to minimise costs in developing a project, designers may resist pressures on budgets in order to safeguard their ‘brand’, and the commercial imperative of maximising profit will drive contractors towards charging what the …

Risk Allocation Under The Principal ‘Traditional’ Irish Forms Of Building Contract, Tony Cunningham

Other Resources

Construction projects are risky ventures. Risks are inevitable and cannot be entirely eliminated but they can be transferred through appropriate wording in the clauses of a contract. Construction contracts allocate particular risks between the parties in order to identify who bears the cost if a particular risk comes to pass.

This study examines how contractual risks are allocated to the contracting parties under the Royal Institute of Architects in Ireland Form, 2012 version, where quantities form part of the contract, commonly known as ‘the Yellow Form’, and the Public Works Contract PW CF1 Form v 1.10, 2014 where the design …

Buildings With Rigid Walls And Flexible Roof Diaphragms. I: Evaluation Of Current U.S. Seismic Provisions, Maria Koliou, Andre Filiatrault, Dominic J. Kelly, John W. Lawson

Architectural Engineering

Buildings having rigid walls and flexible roof diaphragms (RWFD) are a type of building construction widely used for light industry in the United States; they incorporate rigid in-plane concrete or masonry walls and flexible in-plane wood, steel, or hybrid roof diaphragms. In this first of two companion papers, the probability of collapse of this type of building designed to current code provisions in the United States, given an MCE earthquake event, is evaluated according to the FEMA P695 methodology for a large set of representative building archetypes. The results of the study indicate that current code provisions for this type …

Buildings With Rigid Walls And Flexible Roof Diaphragms. Ii: Evaluation Of A New Seismic Design Approach Based On Distributed Diaphragm Yielding, Maria Koliou, Andre Filiatrault, Dominic J. Kelly, John W. Lawson

Architectural Engineering

A seismic collapse evaluation study of buildings with rigid walls and flexible roof diaphragms (RWFD) presented in the companion paper indicates that this type of structure, as designed to current seismic design provisions in the United States, does not satisfy FEMA P695 performance criteria for Risk Category II Buildings. The seismic performance of RWFD buildings is often characterized by large deformations and yielding in the roof diaphragm rather than in the vertical elements of the seismic force–resisting system (SFRS). In this paper, a new seismic design approach is proposed to account for flexible roof diaphragm response. The proposed approach relies …

Parity, Hamza Hasan

Architecture Senior Theses

Digital data contributes to an increasingly alienated aspect of our infrastructure. The complex practices of the Internet produce highly specified, engineered objects. Though their forms are ‘optimized,’ their intentions are not: the two primary considerations for the development of the infrastructure of the Internet are energy and security. Each category presents its own deliberations, but both often produce non-architectural, infrastructural elements beyond public visibility. The hidden infrastructure of data storage and mining (the indexing and analysis of data and traffic) produces spaces outside the agency of normative architectural discourse.

The key consideration for the design of the Internet is redundancy, …

A Hybrid Approach For Increasing Baffling Factors In Contact Tanks, Justin J. Kattnig, Subhas K. Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A novel approach using a hybrid combination of internal baffles and industrial packing material is investigated in order to optimize the hydraulic residence time of a 1,500-gal rectangular concrete tank. Hydraulic residence time, which is commonly classified using the baffling factor (BF), was determined from residence time distribution curves obtained using both computational fluid dynamics (CFD) simulations and physical tracer studies. CFD simulations were used to model two scenarios. The first scenario was a base system consisting of an unbaffled concrete tank, and the second scenario was a two-baffle system. Computational simulation results were experimentally validated via tracer studies on …

Estimation On Gibbs Entropy For An Ensemble, Lekhya Sai Sake

Electronic Theses, Projects, and Dissertations

In this world of growing technology, any small improvement in the present scenario would create a revolution. One of the popular revolutions in the computer science field is parallel computing. A single parallel execution is not sufficient to see its non-deterministic features, as same execution with the same data at different time would end up with a different path. In order to see how non deterministic a parallel execution can extend up to, creates the need of the ensemble of executions. This project implements a program to estimate the Gibbs Entropy for an ensemble of parallel executions. The goal is …

Exploring Emerging Technologies For The Built Environment Circa 2015 For Use In Architectural Engineering And Related Majors, Connor J. Hanlon

Architectural Engineering

For this senior project I am seeking to combine my knowledge of Structural Engineering with Construction Management. For this task, I have decided to look at Building Information Modeling (BIM). In this project I investigate the BIM tools Trimble Tekla Structures and Autodesk Navis- works Manage. Tekla is a modeling, fabrication, and design program. Navisworks is a visualiza- tion and Clash Detection tool. For this project I have identiÅied two main goals relating to Navis- works and Tekla:

1. Create content to allow students and professors learn how to use Tekla and Navisworks

2. Determine the capabilities of these softwares, and Åigure …

   ---

   Go to article

Tron 2.0 - The Experience, Alecsandro G. Vitale, Alexander W. Billings, Jordan Delfino, William Beechinor, Kelly Rorden

Architectural Engineering

The goal of this senior project was to come up with a structural-engineering-related schematic design for a roller coaster to be installed in Disneyland called TRON 2.0: The Experience. This involved looking at both design processes that we had already learned through our curriculum as well as researching concepts that were previously foreign to us, namely the dynamic application of loads and the effects of fatigue stresses.

A story was established based on the source material: the TRON movies produced by Walt Disney Studios. Thematic elements from the story were used as the basis for design implications that would become …

Subjective Perception Of Varying Reflection Densities In Room Impulse Responses, Hyun Hong

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Reverberation time (RT) is a metric commonly used to describe room acoustic conditions, but different rooms which have the same reverberation time can have different reflection densities. Much less is known about how humans perceive different reflection densities and how sensitive humans are to changes in reflection density. Previous investigations in the existing literature have studied the upper limit of distinguishable reflection density using artificial impulse responses, but not with more realistic impulse responses simulated in room acoustic software or measured from real rooms. The aim of this dissertation is to investigate methods for quantifying reflection density from measured impulse …

Discomfort Glare From Small, High Luminance Light Sources In Outdoor Nighttime Environments, Yulia I. Tyukhova

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

The overarching goal of this research was to examine humans’ subjective and physiological responses to small, high luminance light sources in outdoor nighttime environments. Currently, discomfort glare is rarely calculated in lighting practice (Remaking Cities Institute (RCI) 2011), partly, because it is not known which metric predicts glare most accurately in the given application.

This dissertation describes a parametric experiment evaluating the effects of three glare source luminances (20,000; 205,000; 750,000 cd/m²), two source positions (0°, 10°), two source sizes (10^-5, 10^-4 sr), and three background luminances (0.03; 0.3; 1 cd/m²) on the …