Mechanical Engineering Commons^™

Effect Of Fiber Proximity On The Pullout Response: A Finite Element Study, Tyler Mitchell

Mechanical Engineering ETDs

With the advancement of computational capabilities, there is growing interest in
developing intricate models for composite materials. This has been historically chal-
lenging due to the multifaceted interactions and failure mechanisms of these materi-
als. Multiscale modeling holds promise for predicting the intricate dynamics of such
materials. A foundational understanding of their microscale behaviors is critical, par-
ticularly the interfacial interactions between the fiber and matrix. This study delves
into the influence of fiber volume fraction (FVF) on fiber pull-out tests, focusing
on the impact of neighboring fibers across different geometries and the underlying
cohesive properties.

The Automated Wheelchair, Jonathan Doksa Kamba Ngoyi

Honors College Theses

Automation refers to the use of technology to execute tasks through programmed instructions and automated control mechanisms to ensure accurate execution. This minimizes human involvement and encompasses various fields, including business process automation. A notable form of automation is assistive technology, which refers to any device or software that enhances individuals' learning, communication, or overall functionality. This can range from advanced tools like computers to simpler aids like walking sticks. Assistive technology aims to promote inclusivity and participation, particularly among individuals with disabilities, the elderly, and those with non-communicable diseases.

The Automated Airport Wheelchair is a culmination of prior projects …

Head Impact Effects In Small Remotely Piloted Aircraft System (Srpas) Collisions: Gender Specific Risks And Vulnerable Population Protection, Md Farhan Hoque Sagar

Electronic Thesis and Dissertation Repository

This study focuses on supporting the development of safety regulations for vulnerable populations during drone to head impacts. First, the small female head and neck model was compared to cadaveric data. Then, combined with lab’s previous work, gender-based disparities in head impact responses were highlighted, with small females experiencing higher injury risk metrics, despite lower skull von Mises stress. Beyond small females, children of various ages and their head responses during impacts were also analyzed. In addition to the previously developed quadcopter drone model, a new Mavic Pro drone model was developed, and this model was integrated with human head …

Thermo-Mechanical Instabilities In Next-Generation Friction Materials In High-Speed Sliding Systems, Kingsford Koranteng

Electronic Theses and Dissertations

For centuries, the manufacturing industry has incorporated metals like copper into friction materials to enhance thermal properties and minimize thermo-mechanical instabilities (TMI) in high-speed sliding systems. Unfortunately, these metals have adverse environmental effects due to the emission of hazardous particulate matter. As a result, there is a growing movement towards adopting next-generation friction materials as an alternative solution.

The study begins by conducting experimental and numerical investigations to examine the instabilities found in metal-based friction materials. The primary objective is to utilize the insights gained from the investigations to computationally explore effective strategies for mitigating various instabilities that may arise …

Molecular Dynamics Study Of Characterization In Metal-Free Friction Materials, Yizhan Zhang

Electronic Theses and Dissertations

Metallic friction materials currently used in industry may adversely impact the environment. Substitutions for metals in friction materials, on the other hand, can introduce operational safety issues and other unforeseeable issues such as thermal-mechanical instabilities and insufficient strength. In view of it, this dissertation focuses on developing different kinds of materials from simple structure to complex structure and evaluating the material properties with the assistance of molecular dynamics (MD) tools at the nano scale.

First, the concept of the contacted surfaces in friction at the atomic scale was introduced in order to get accurate understanding of the friction process compared …

An Investigation Into The Challenges Of Contemporary Additive Manufacturing: Insights Into The Metallurgical Response Of Materials And Relevant Solution, Huan Ding

LSU Doctoral Dissertations

Additive Manufacturing (AM) has gained attention in recent years due to its unique capabilities in the fabrication of complex parts. As with any new research, there is still a lack of sufficient understanding in the field of additive manufacturing, and further investigation is needed to solve existing problems. Ultimately, the aim is to enable the widespread use of AM components across various industries.

Chapter One provides a brief introduction to the background and current bottlenecks of additive manufacturing technology. Chapter two focuses on the development of high-strength 7075 aluminum alloy (Al7075) for Fused Deposition Modeling and Sintering (FDMS) technology. Al7075 …

Exploration Of Motion Capture System To Investigate Human Shoulder Kinematics, Ola Alsaadi

Electronic Theses and Dissertations

The glenohumeral joint (GH) is commonly conceptualized as a ball-and-socket joint [1], and its center of rotation (COR) is presumed to coincide with the geometric center of the medial-superior region of the humeral head [2]. Recent research has endorsed improvements in COR estimation through invasive and noninvasive techniques, including cadaver studies, stereophotogrammetry, and motion capture (MOCAP) systems. Despite increased interest in wearable technology within human movement analysis, the problem of COR estimation employing MOCAP systems and its validation against bi-planar fluoroscopy remains relatively unexplored.

This study employed a marker-based MOCAP system to compare the accuracy, error, and precision of three …

Digital Twins Of The Living Knee: From Measurements To Model, Thor Erik Andreassen

Electronic Theses and Dissertations

Modern medicine has dramatically improved the lives of many. In orthopaedics, robotic surgery has given clinicians superior accuracy when performing interventions over conventional methods. Nevertheless, while these and many other methods are available to ensure treatments are performed successfully, far fewer methods exist to predict the proper treatment option for a given person. Clinicians are forced to categorize individuals, choosing the best treatment on “average.” However, many individuals differ significantly from the “average” person, for which many of these treatments are designed. Going forward, a method of testing, evaluating, and predicting different treatment options' short- and long-term effects on an …

Changes In Balance With Brain Inflammation: Sensitivity In Dual Motor Mechanisms, Hannah Mcdade

Electronic Theses and Dissertations

Concussion assessment in athletes has gained prominence due to potential long-term consequences of traumatic brain injuries. Evaluating balance alterations is crucial for understanding post-injury motor control strategies. This study introduces a novel approach to understanding center of pressure (COP) dynamics during quiet stance tasks for assessing balance impairments in athletes recovering from concussion. Concussed athletes often experience impaired motor function and cognitive deficits, increasing the risk of orthopedic injury. Traditional balance assessments focus on total COP (COPt), overlooking nuanced hip and ankle mechanisms. This research investigates COP variations between constant loading (COPc) and variable loading (COPv) signals in concussed athletes …

Development Of Guidance, Navigation, And Control Systems For Multi-Spacecraft Assembly In Proximity Operations, Mohammed Ayman Atallah

Theses

This thesis presents the development of Guidance, Navigation, and Control (GNC) algorithms for multi-spacecraft assembly in proximity operations. A 3-DOF mathematical model of spacecraft relative translational motion is derived using the Euler-Lagrange method. Additionally, a 6-DOF mathematical model of spacecraft relative translational and rotational motion is derived using the twistor method, with consideration for the kinematic coupling effect. A new Linear Time-Invariant (LTI) model is developed based on the twistor model, which is utilized in the design of the GNC systems. Both LTI Model Predictive Control (MPC) and Linear Time-Varying (LTV) MPC algorithms are employed to develop Guidance and Control …

Experimental Study Of Central And Side Jet With And Without Chevron Nozzle Exit On Gas Turbine Leading Edge Jet Impingement Cooling, Ahmad Yousef Alqasrawi

Theses

This thesis presents a comprehensive investigation into the application of jet impingement cooling on turbines blade leading edge. Gas turbines are extensively utilized in power generation and aerospace industries, where efficient cooling techniques are crucial to enhance the performance and lifespan of turbine blades. The leading edge of a turbine blade is particularly vulnerable to high-temperature exposure and thermal stresses, making it an essential area for effective cooling strategies. Jet impingement cooling is one of the most effective cooling techniques mostly used in the leading edge of rotating and stationary blades. This study aims to explore the performance of jet …

Design And Fem Modelling Of Mems Capacitive Accelerometer And Gyroscope For Quadcopter/Uav Applications, Shaikha Rashid Alnaqbi

Theses

This study presents the design, simulation, and analysis of Micro Electromechanical Systems (MEMS) sensors, constituting the principal components of MEMS-based Inertial Measurement Units (IMUs). The main objective of the study is to design, simulate and analyze 3-axis capacitive accelerometer and 3-axis gyroscope. The MEMS-based capacitive accelerometers and gyroscope are analyzed using Ansys Workbench. Modal, Static Structural and harmonic analysis are used to obtain resonant frequencies, deformation/stress and profile of amplitude over a wide range of frequencies. Mechanical sensitivity analysis of the designed accelerometer and gyroscope is performed using the Finite Element Method (FEM). Analytical Equations are developed to calculate mechanical …

Aerodynamic & Aeroacoustic Performance Of Wind Turbine Blades Featuring Enhanced Flow-Control, Md Zishan Akhter

Dissertations

Wind energy, being one of the cleanest and most sustainable sources, has undergone remarkable growth in recent years due to advancements in aerodynamics and increased power output. The research community is actively pursuing the development of cutting-edge solutions to further optimize wind turbine technology, ensuring its maximum efficiency and revolutionizing the landscape of wind power.
This research aims to design and develop flow-control devices for wind turbine blades, employing both active and passive control mechanisms, namely morphing trailing-edge and slot-profile, respectively. The objective is to enhance wind turbine performance across a wide range of wind speeds. The morphing trailing-edge mechanism …

Computational Methodology For Generating Patient-Specific Soft Tissue Representations, Ahilan Anantha Krishnan

Electronic Theses and Dissertations

This dissertation focused on modeling specimen-specific soft tissue structures in the context of joint replacement surgery. The research addressed four key aspects. The first study involved developing a workflow for creating finite element models of the hip capsule to replicate its torque-rotational response. Experimental data from ten cadaveric hips were used to calibrate the models, resulting in improved accuracy and relevance for surgical planning and implant design. The second study tackled the challenge of expediting the calibration of mechanical properties of the hip capsule to match patient-specific laxities. A statistical shape function model was proposed to generate patient-specific finite element …

Kinematic Analysis Of Gait And Deep Knee Flexion For Pre- And Post-Operative Total Knee Arthroplasty, Samantha Collins

Electronic Theses and Dissertations

Osteoarthritis (OA) is a form of arthritis that develops in the joint due to overuse and aging causing pain, discomfort, and disability. Total Knee Arthroplasty (TKA) is a surgical procedure performed when OA symptoms are severe with an estimated 600,000 patients in the United States currently receiving TKA. Studies have reported dissatisfaction of the knee for 14-39% of patients. This study collected knee kinematics before and after surgery using stereo radiography for precise measurement of gait and deep knee flexion activities. Results showed healthy knee kinematics were not restored and no significant changes could be seen from OA kinematics in …

Design And Scale Model Of Wave Generator For The Testing Of Wave Energy Conversion Devices, Amanda Olla

Master's Theses

As the climate crisis draws more concern, research and development in wave energy as a renewable energy source has increased. Devices such as wave energy converters (WECs) are being researched, tested, and implemented to make wave energy a competitive power source. Testing of these devices is limited due to environmental concerns such as weather, location, and other issues. WECs require testing in a marine environment, however, performing testing in the actual environment may be difficult due to weather, access, mounting, and other issues. To eliminate environmental unknowns from testing, a wave simulator device can mimic wave behavior without the need …

Onshore Power For The Docked Container Vessels In Apapa Port Through Blended Finance, Oladayo Matthew Atilola

World Maritime University Dissertations

No abstract provided.

Potential Roles Of Vessel Traffic Services (Vts) In Maritime Decarbonization, Suleiman Mustapha Bunza

World Maritime University Dissertations

No abstract provided.

Application Of Wind Propulsion In The Existing Fleet Of The Caspian Sea Using Real Wind Data, Mahmud Suleymanli

World Maritime University Dissertations

No abstract provided.

Analysis Of The Pros And Cons Of The Acquisition Of Training Ships By Metis, Jeremiah Yaw Frimpong

World Maritime University Dissertations

No abstract provided.

Exploring The Role Of Education In Addressing The Skills Gap For Seafarers In Bangladesh's Maritime Industry, Fatema Tuz Tahera

World Maritime University Dissertations

No abstract provided.

Knowledge Integration In Domain-Informed Machine Learning And Multi-Scale Modeling Of Nonlinear Dynamics In Complex Systems, Phat K. Huynh

USF Tampa Graduate Theses and Dissertations

Nonlinear dynamical systems have been extensively used to model various phenomena in the changing world around us, especially in science and engineering fields. Thanks to breakthrough advancements in sensing technologies, an increasingly high volume of multi-modal sensor data has been collected, which enables us gain better insights into complex systems dynamics and build sophisticated data-driven machine-learning-based dynamic models without having the access to the underlying governing equations. However, integrating domain-specific knowledge in machine learning algorithms remains pivotal for various reasons: it promises enhanced predictive accuracy, better model interpretability, and increased generalizability. This dissertation delves into three core research questions, each …

Structural Health Monitoring And Repair Of Welded Thermoplastic Composite Joints Using Embedded Multifunctional Films, Wencai Li

LSU Doctoral Dissertations

Thermoplastic composites (TPCs) have gained widespread use, particularly in large or integrated structural components, necessitating effective joining techniques. Fusion bonding (welding) has emerged as a suitable method for TPCs due to their ability to be reshaped through heating and cooling, eliminating the need for mechanical fasteners, long curing times, and extensive surface preparation. Among the welding techniques, ultrasonic welding (USW) stands out for its fast-cycling time and potential for automating large-scale structures, thereby reducing energy consumption. However, limited industrial applications of USW in this context require further knowledge to instill confidence in the process. Moreover, composite structures are susceptible to …

Anisotropic Mechanical Material Investigation On Moisture And Strain Rate Sensitivity Of Direct Compounded Compression Moulded Glass/Pa6 Lfts, Pouya Mohammadkhani

Electronic Theses and Dissertations

In this study the tensile properties at different loading rates as well as shear properties of a direct-compounded compression-moulded Polyamide6 (PA6)/glass long fibre thermoplastic (LFT-D) material with a fibre weight content of 30% were investigated. The effects of moisture on the anisotropic mechanical and material properties of Glass/PA6 LFT materials were examined by testing at four different material directions of 0°, +45°, ˗45°, and 90°. In order to study the effect of tensile loading rate on this material, different nominal strain rates ranging from 0.0001 1/s to 150 1/s were examined. Under quasi-static loading, at a 2% moisture content, the …

Design And Characterization Of A High Pressure Flow Loop For Heat Transfer Experiments Of Supercritical Carbon Dioxide, Joseph Sauerbrun

Doctoral Dissertations and Master's Theses

Supercritical carbon dioxide (sCO2) sees heightened heat transfer characteristics near its critical point due to its drastically changing thermophysical properties. Conventional single phase heat transfer theory was not developed to capture this nonlinear variation in properties and cannot predict the heat transfer characteristics of sCO2 to a practical level useful for design. To delve deeper into the behavior near the critical point and shed light on this crucial phenomenon, a state-of-the-art closed flow loop was developed. This setup enabled convective heat transfer experiments of sCO2 under diverse boundary conditions and test section geometries. Key components of the loop include the …

Explorations In Monocular Distance And Ranging (Modar) Techniques For Real-World Applications, Devon Vail

Doctoral Dissertations and Master's Theses

In this work, an initial prototype of a monocular camera system capable of retrieving depth-from-focus using a liquid focus-tunable lens is constructed out of hobby-grade photography equipment. This concept has been explored previously in laboratory settings using specialized equipment; this work seeks to determine the feasibility of retrieving depth-from-focus using commercially available components. To achieve this, an iterative exploration of existing techniques was performed to verify their utility in the final ensemble of processes to retrieve depth from 2D images. Initially, blurry images were simulated by applying Gaussian blur to test images to verify the functionality of a Laplacian of …

Elastic Sensing Skin For Monitoring Of Concrete Structures, Emmanuel Abiodun Ogunniyi

Theses and Dissertations

Soft elastomeric capacitors (SECs) are emerging as potential low-cost solutions for monitoring cracks and strains in concrete infrastructure, a crucial aspect of structural health monitoring. Effective long-term monitoring of civil infrastructure can reduce the risk of structural failures and potentially reduce the cost and frequency of inspections. However, deploying structural health monitoring (SHM) technologies for bridge monitoring is expensive, especially long-term, due to the density of sensors required to detect, localize, and quantify cracks. Previous research on soft elastomeric capacitors (SEC) has shown their viability for low-cost monitoring of cracks in transportation infrastructure. However, when deployed on concrete for strain …

Machine Learning Approach To Activity Categorization In Young Adults Using Biomechanical Metrics, Nathan Q. C. Holland

Mechanical & Aerospace Engineering Theses & Dissertations

Inactive adults often have decreased musculoskeletal health and increased risk factors for chronic diseases. However, there is limited data linking biomechanical measurements of generally healthy young adults to their physical activity levels assessed through questionnaires. Commonly used data collection methods in biomechanics for assessing musculoskeletal health include but are not limited to muscle quality (measured as echo intensity when using ultrasound), isokinetic (i.e., dynamic) muscle strength, muscle activations, and functional movement assessments using motion capture systems. These assessments can be time consuming for both data collection and processing. Therefore, understanding if all biomechanical assessments are necessary to classify the activity …

The Effect Of Through Thickness Reinforcement Angle On The Disbonding Behavior In Skin-Stringer Configuration, Christopher John Morris

Mechanical & Aerospace Engineering Theses & Dissertations

Post-cure through thickness reinforcement is a method used to increase the mechanical properties of composite laminates in the transverse direction. This study conducted a test on skin-stringer structures bonded together in three configurations using an epoxy or thermoplastic adhesive at the interface with reinforcing pins inserted through the laminate thickness located at the edge of the stringer at differing angles between -30º and 30º. The fabrication of these samples in configurations B and C consisted of the use of carbon fiber prepeg laminate at a ply orientation of [0₂90₂]_2s for the skin and [0 90] …

Fabrication Of Smooth Sac305 Thin Films Via Magnetron Sputtering And Evaluations Of Microstructure, Creep, And Electrical Resistivity, Manish Ojha

Mechanical & Aerospace Engineering Theses & Dissertations

SAC305 (96.5%Sn-3%Ag-0.5%Cu) is the leading alternative to the traditional Sn-Pb solder eutectic alloy owing to its low melting temperature, better compatibility with other components, and excellent mechanical/structural properties. In the realm of modern electronics, where devices are increasingly miniaturized, the design and characterization of thin solder joints become paramount. The orientation and size of the grains within the solder can influence its ability to withstand mechanical stresses. However, research on SAC thin films remains sparse, and these films present unique challenges and characteristics compared to their bulk counterparts, influenced by factors like interfaces, stresses, thickness, microstructure, and the nature of …