Mechanical Engineering Commons^™

Low Cost Flow Sensing For Field Sprayers, Yue Zhang

Theses and Dissertations--Biosystems and Agricultural Engineering

Precisely measuring the flow rate in sprayers is a key technology to precision agriculture. With the development of advanced technologies, the demand for the ability to measure flow rate of individual nozzle has become more important and urgent.

This paper investigates the possibility of developing a low-cost flow rate measurement technique. The technique is based on analyzing the acoustic signal from a microphone placed near the nozzle tip. A comparison between acoustic signal and vibration signal was made to study the relations between them. Then several possible locations of the microphone for measuring flow rate were tested and compared, and …

Effects Of Time Varying Background Noise Conditions On Human Perception And Performance, Andrew H. Hathaway

Durham School of Architectural Engineering and Construction: Dissertations, Thesis, and Student Research

This thesis was designed to study the effects of changing noise conditions on human perception and performance. In two phases, participants were exposed to a number of noise conditions and their performance on an arithmetic task involving short-term memory was monitored and their subjective perception of noise conditions was collected via questionnaires.

In the first phase, participants were tested while being subjected to RC-29(H) and RC-47(RV) conditions created by broadband noise fluctuating on different time intervals, resembling the changing noise conditions potentially found in modern HVAC systems. These intervals varied from two minutes to ten minutes. Results show a significant …

Effect Of Compression On The Transmission Loss Of Porous Material, Yingchao Yang, J Stuart Bolton

The Summer Undergraduate Research Fellowship (SURF) Symposium

Porous materials are commonly applied in sound absorption in different places. Transmission loss, one of the vital parameters determining the performance of the material, will change when the material is compressed. Usually the compression that might affect the properties to the greatest extent are normal compression and the deformation can be simplified as 1D compression model. In order to verify the prediction, some formulas taking several parameters (porosity, tortuosity, flow resistivity and characteristic lengths) into account are applied and also the Johnson et al’s model of limp structure. Dynamic density of limp model and bulk modulus are thus obtained and …

Acoustic And Dynamic Characteristics Of A Complex Urban Turnout Using Fibre-Reinforced Foamed Urethane (Ffu) Bearers, Sakdirat Kaewunruen

Sakdirat Kaewunruen

A special track system used to divert a train to other directions or other tracks is generally called ‘railway turnout’. A traditional turnout system includes rails, switches, crossings (special track components), steel plates, fasteners, screw spikes, timber bearers, ballast and formation. The wheel rail contact over the crossing transfer zone has a dip-like shape and can often cause detrimental impact loads on the railway track and its components. The large impact also emits disturbing noises (either impact or ground-borne noise) to railway neighbors. In a brown-field railway track where an existing aged infrastructure requires renewal or maintenance, some physical constraints …

The Water Entry Of Slender Axisymmetric Bodies: Forces, Trajectories And Acoustics, Kyle Gordon Bodily

Theses and Dissertations

Free surface water entry of various objects has been studied using high-speed images and image processing techniques for decades. This thesis studies the forces, velocities, and trajectories of slender axisymmetric projectiles using an embedded inertial measurement unit (IMU). Three nose shapes (cone, ogive, and flat) were used in the study. Additionally, the projectiles were tested at vertical and oblique impact angles with different surface conditions. One-half of each projectile was coated down the centerline with a hydrophobic spray, creating a half hydrophobic, half hydrophilic case. The trajectory of this half-and-half case impacting vertically was compared to the trajectory of symmetrically …

Fluid-Structure Interactions With Flexible And Rigid Bodies, David J. Daily

Theses and Dissertations

Fluid structure interactions occur to some extent in nearly every type of fluid flow. Understanding how structures interact with fluids and visa-versa is of vital importance in many engineering applications. The purpose of this research is to explore how fluids interact with flexible and rigid structures. A computational model was used to model the fluid structure interactions of vibrating synthetic vocal folds. The model simulated the coupling of the fluid and solid domains using a fluid-structure interface boundary condition. The fluid domain used a slightly compressible flow solver to allow for the possibility of acoustic coupling with the subglottal geometry …

Vector Acoustic Intensity Around A Tuning Fork, Daniel A. Russell, Justin Junell, Daniel O. Ludwigsen

Physics Publications

The acoustic intensity vector field around a tuning fork is investigated. Theory for a longitudinal quadrupole source predicts a well-defined transition between near-field and far-field, with significant circulation of sound energy in the near-field. Vector components of the time-averaged intensity were measured using a two-microphone intensity probe and found to agree well with predictions from theory. The vector intensity map is interpreted, and shown to provide useful information about the near-field of an acoustic source.

Reverse Engineering The Structural And Acoustic Behavior Of A Stradivari Violin, Michael A. Pyrkosz

Dissertations, Master's Theses and Master's Reports - Open

There is a tremendous amount of mystery that surrounds the instruments of Antonio Stradivari. There have been many studies done in the past, but no one completely understands exactly how he made his instruments, or why they are still considered the best in the world. This project is designed to develop an engineering model of one of Stradivari's violins that will accurately simulate the structural and acoustic behavior of the instrument. It also hopes to shine some light on what makes the instruments of Stradivari unique when compared to other violins. It will focus on geometry and material properties, utilizing …

Developing A System For Blind Acoustic Source Localization And Separation, Raghavendra Kulkarni

Wayne State University Theses

This dissertation presents innovate methodologies for locating, extracting, and separating multiple incoherent sound sources in three-dimensional (3D) space; and applications of the time reversal (TR) algorithm to pinpoint the hyper active neural activities inside the brain auditory structure that are correlated to the tinnitus pathology. Specifically, an acoustic modeling based method is developed for locating arbitrary and incoherent sound sources in 3D space in real time by using a minimal number of microphones, and the Point Source Separation (PSS) method is developed for extracting target signals from directly measured mixed signals. Combining these two approaches leads to a novel technology …

Sound Absorption Properties Of Functionally Graded Polyurethane Foams, Olivier Doutres Ph.D., Noureddine Atalla Pr.

Olivier Doutres Ph.D.

Noise control over a wide frequency band is an increasingly important design criterion in the building and transport industries. Examples of well known broadband passive concepts for optimal sound absorption are multi-layering with graded properties across the thickness and optimization of the material shape (e.g., wedges). However, for typical applications, the material thickness is limited and shaping or use of different material costly. Thus, there is growing interest for developing acoustical materials having microstructure properties gradient at the micro- or meso-scale; also known as Functionally Graded Materials (FGM). Even if sophisticated models are available to predict the acoustic behavior of …

Resonance Frequencies Of A Spherical Aluminum Shell Subject To Static Internal Pressure, Andrew A. Piacsek, Sami Abdul-Wahid, Robert Taylor

All Faculty Scholarship for the College of the Sciences

Measurements of the vibrational response of a spherical aluminum shell subject to changes in the interior pressure clearly demonstrate that resonance frequencies shift higher as the pressure is increased. The frequency shift appears to be smaller for longitudinal modes than for bending wave modes. The magnitude of frequency shift is comparable to analytical predictions made for thin cylindrical shells. Changes in the amplitudes of resonance peaks are also observed. A possible application of this result is a method for noninvasively monitoring pressure changes inside sealed containers, including intracranial pressure in humans.

Finite Element Modeling And Design Of Honeycomb Sandwich Panels For Acoustic Performance, David Griese

All Theses

Honeycomb cellular metamaterial structures offer many distinct advantages over homogenous materials because their effective material properties depend on both their constituent material properties and their geometric cell configuration. From this, a wide range of targeted effective material properties can be achieved thus supporting forward design by tailoring the honeycomb cellular materials and properties for specific applications. One area that has not been fully explored is the set of acoustic properties of honeycomb materials and how these can offer increased design flexibility when targeting acoustic performance. Understanding these relations, the designer can effectively tune designs to perform better in specific acoustic …

Acoustic Testing And Modeling: An Advanced Undergraduate Laboratory, Daniel A. Russell, Daniel O. Ludwigsen

Physics Publications

This paper describes an advanced laboratory course in acoustics, specifically targeted for students with an interest in engineering applications at a school with a strongly integrated industrial co-op program. The laboratory course is developed around a three-pronged approach to problem solving that combines and integrates theoretical models, computational models, and experimental data. The course is structured around modules that begin with fundamental concepts and build laboratory skills and expand the knowledge base toward a final project. Students keep a detailed laboratory notebook, write research papers in teams, and must pass laboratory certification exams. This paper describes the course layout and …

Dolphin Sound Production And Distribution On The West Florida Shelf, Peter Simard

USF Tampa Graduate Theses and Dissertations

This dissertation is an investigation of dolphin sound production and distribution off west central Florida. Although a wealth of information exists on the production of common sounds (whistles, echolocation) made by captive, trained dolphins, far less is known about free-ranging dolphin sound production and of unusual sounds. In addition, while inshore dolphin populations or communities are the subjects of research projects in many locations, dolphins in offshore waters are less commonly studied. The objectives of this dissertation were to contribute information on free-ranging dolphin sounds and continental shelf dolphin distribution.

While echolocation has been rigorously studied in captive, trained dolphins, …

Simulation Of Whistle Noise Using Computational Fluid Dynamics And Acoustic Finite Element Simulation, Jiawei Liu

Theses and Dissertations--Mechanical Engineering

The prediction of sound generated from fluid flow has always been a difficult subject due to the nonlinearities in the governing equations. However, flow noise can now be simulated with the help of modern computation techniques and super computers. The research presented in this thesis uses the computational fluid dynamics (CFD) and the acoustic finite element method (FEM) in order to simulate the whistle noise caused by vortex shedding. The acoustic results were compared to both analytical solutions and experimental results to better understand the effects of turbulence models, fluid compressibility, and wall boundary meshes on the acoustic frequency response. …

Dynamic Properties Of Railway Track And Its Components : A State-Of-The-Art Review, Sakdirat Kaewunruen, Alexander Remennikov

Alex Remennikov

Recent findings indicate one of major causes of damages, which is attributed to the resonant behaviours, in a railway track and its components. Basically, when a railway track is excited to generalised dynamic loading, the railway track deforms and then vibrates for certain duration. Dynamic responses of the railway track and its components are the key to evaluate the structural capacity of railway track and its components. If a dynamic loading resonates the railway track’s dynamic responses, its components tend to have the significant damage from excessive dynamic stresses. For example, a rail vibration could lead to defects in rails …

Analytical Comparison Of Multimicrophone Probes In Measuring Acoustic Intensity, Curtis P. Wiederhold

Theses and Dissertations

In the late 1970s, a method was developed to estimate acoustic intensity in one dimension by taking the cross-spectral density of two closely-spaced microphone signals. Since then, multimicrophone probes have been developed to measure three-dimensional intensity as well as energy density. Their usefulness has led to the design of various types of multimicrophone probes, the most common being the four-microphone orthogonal, the four-microphone regular tetrahedron, and the six-microphone designs. These designs generally either consist of microphones suspended in space near each other or mounted on the surface of a sphere. This work analytically compares the relative merits of each probe …

Quantifying Multiple Types Of Damping Acting On Bronze-Wound Guitar Strings, Jonathan Christian

Purdue Polytechnic Masters Theses

The goal of this study was to quantify the contributions of multiple damping types acting on guitar strings for each mode over a wide frequency range so that design variables could be identified to one day create frequency based damping in guitar strings. Structural dynamic testing was used to obtain the time-response of a vibrating string in open air and in a vacuum. From this signal, each harmonic was filtered and the decay envelope was curve-fitted with a function that was a linear summation of decay functions. From the curve-fits, the damping coefficients for aerodynamic, friction, and material damping were …

The Effect Of Static Pressure On The Inertial Cavitation Threshold And Collapse Strength, Kenneth Bryan Bader

Electronic Theses and Dissertations

The amplitude of the acoustic pressure required to nucleate a gas and/or vapor bubble in a fluid, and to have that bubble undergo an inertial collapse, is termed the inertial cavitation threshold. The hydrostatic dependence of the inertial cavitation threshold was measured up to 30 MPa in ultrapure water using a high quality factor spherical resonator. The threshold increased linearly with the hydrostatic pressure and was found to be temperature dependent. The strength of the bubble collapse at the threshold was measured in terms of shock waves and light emissions. The shock amplitudes increased linearly with the hydrostatic pressure, while …

Scanning Laser Registration And Structural Energy Density Based Active Structural Acoustic Control, Daniel Alan Manwill

Theses and Dissertations

To simplify the measurement of energy-based structural metrics, a general registration process for the scanning laser doppler vibrometer (SLDV) has been developed. Existing registration techniques, also known as pose estimation or position registration, suffer from mathematical complexity, instrument specificity, and the need for correct optimization initialization. These difficulties have been addressed through development of a general linear laser model and hybrid registration algorithm. These are applicable to any SLDV and allow the registration problem to be solved using straightforward mathematics. Additionally, the hybrid registration algorithm eliminates the need for correct optimization initialization by separating the optimization process from solution selection. …

Improved Measurement And Separation Techniques For Interior Near-Field Acoustical Holography, Zachary A. Collins

Theses and Dissertations

Recent advances in near-field acoustical holography (NAH) have expanded the theory to interior spaces where multiple sources and/or reflections are present. In 1990, Tamura presented the spatial Fourier transform separation method to measure the reflection coefficient at oblique angles using two measurement planes in the wave number domain. This paper adapts the spatial Fourier transform separation method for application in interior NAH. A practical exploration of important experimental parameters is performed, which include the relative amplitudes of primary and disturbing sources, the measurement plane separation distance, and an acceptable noise floor. This technique is successfully applied in a reverberant environment …

Elastic And Magnetic Properties Of Tb6fe(Sb,Bi)2 Using Resonant Ultrasound Spectroscopy., David Michael Mccarthy

Masters Theses

Tb6FeSb2 and Tb6FeBi2 are novel rare earth compounds with little prior research. These compounds show high and variable curie temperatures for rare-earth compounds. This has lead to a literature review which includes the discussion of: elasticity, resonance, and magnetism. This review is used to discuss the theory and methodology which can relate these various properties to each other. Furthermore, synthesis, x-ray analysis, and RUS sample preparation of Tb6FeSb2 and Tb6FeBi2 were completed.

Resonant Ultrasound Spectroscopy (RUS) elastic studies were taken for Tb6FeSb2 and Tb6FeBi2 as a function temperature from 5-300K, in various magnetic fields ranging from 0-9T. Tb6FeSb2’s and Tb6FeBi2’s …

A Prediction Of The Acoustical Output Of A Golf Driver Head Using Finite Elements, Roger Sharpe

Master's Theses

A simulation was created using LS-DYNA® to determine the acoustical properties of a golf ball and golf driver head impact. LS-DYNA® has a coupled finite element analysis (FEA) and boundary element method (BEM) solver that uses the integral form of Helmholtz’s acoustic wave equation to deliver predicted sound pressure levels at predetermined acoustic points. Validation of the modeling was done on a simple plate donated by Titleist Golf. The plate was modeled and meshed using TrueGrid and impacted by a three layer golf ball model derived from “Tanka’s” paper on multilayered golf balls. The final converging model consisted of 10,900 …

Dynamic Properties Of Railway Track And Its Components : A State-Of-The-Art Review, Sakdirat Kaewunruen, Alexander Remennikov

Faculty of Engineering - Papers (Archive)

Recent findings indicate one of major causes of damages, which is attributed to the resonant behaviours, in a railway track and its components. Basically, when a railway track is excited to generalised dynamic loading, the railway track deforms and then vibrates for certain duration. Dynamic responses of the railway track and its components are the key to evaluate the structural capacity of railway track and its components. If a dynamic loading resonates the railway track’s dynamic responses, its components tend to have the significant damage from excessive dynamic stresses. For example, a rail vibration could lead to defects in rails …

Better Understanding Of Resonance Through Modeling And Visualization, Daniel O. Ludwigsen, Cayla Jewett, Matthew Jusczcyk

Physics Presentations And Conference Materials

Students encounter cavity resonance and waveguide phenomena in acoustics courses and texts, where the study is usually limited to cases with simple geometries: parallelepipeds, cylinders, and spheres. Long-wavelength approximations help with situations of more complexity, as in the classic Helmholtz resonator. At Kettering University, we are beginning to employ finite element modeling in our acoustics classes to help undergraduates better understand the acoustic modes of actual structures. This approach to the time-independent wave equation (the Helmholtz equation) was first used in a research and measurements class to investigate two classic resonance problems. The first problem was a study of resonance …

The Effect Of Loading On Disturbance Sounds Of The Atlantic Croaker Micropogonius Undulatus: Air Versus Water, Michael L. Fine, Justin Schrinel, Timothy M. Cameron

Biology Publications

Physiological work on fish sound production may require exposure of the swimbladder to air, which will change its loading (radiation mass and resistance) and could affect parameters of emitted sounds. This issue was examined in Atlantic croaker Micropogonius chromis by recording sounds from the same individuals in air and water. Although sonograms appear relatively similar in both cases, pulse duration is longer because of decreased damping, and sharpness of tuning (Q factor) is higher in water. However, pulse repetition rate and dominant frequency are unaffected. With appropriate caution it is suggested that sounds recorded in air can provide a useful …

Acoustic Communication In Two Freshwater Gobies: Ambient Noise And Short-Range Propagation In Shallow Streams, Marco Lugli, Michael L. Fine

Biology Publications

Noise is an important theoretical constraint on the evolution of signal form and sensory performance. In order to determine environmental constraints on the communication of two freshwater gobies Padogobius martensii and Gobius nigricans, numerous noise spectra weremeasured from quiet areas and ones adjacent to waterfalls and rapids in two shallow stony streams. Propagation of goby sounds and waterfall noise was also measured. A quiet window around 100 Hz is present in many noise spectra from noisy locations. The window lies between two noise sources, a low-frequency one attributed to turbulence, and a high-frequency one (200–500 Hz) attributed to bubble …

Acoustic Competition In The Gulf Toadfish Opsanus Beta: Acoustic Tagging, Robert F. Thorson, Michael L. Fine

Biology Publications

Nesting male gulf toadfish Opsanus beta produce a boatwhistle advertisement call used in male–male competition and to attract females and an agonistic grunt call. The grunt is a short-duration pulsatile call, and the boatwhistle is a complex call typically consisting of zero to three introductory grunts, a long tonal boop note, and zero to three shorter boops. The beginning of the boop note is also gruntlike. Anomalous boatwhistles contain a short-duration grunt embedded in the tonal portion of the boop or between an introductory grunt and the boop. Embedded grunts have sound-pressure levels and frequency spectra that correspond with those …

The Solution Of Hypersingular Integral Equations With Applications In Acoustics And Fracture Mechanics, Richard S. St. John

Mathematics & Statistics Theses & Dissertations

The numerical solution of two classes of hypersingular integral equations is addressed. Both classes are integral equations of the first kind, and are hypersingular due to a kernel containing a Hadamard singularity. The convergence of a Galerkin method and a collocation method is discussed and computationally efficient algorithms are developed for each class of hypersingular integral equation.

Interest in these classes of hypersingular integral equations is due to their occurrence in many physical applications. In particular, investigations into the scattering of acoustic waves by moving objects and the study of dynamic Griffith crack problems has necessitated a computationally efficient technique …

Analysis Of Random Structure-Acoustic Interaction Problems Using Coupled Boundary Element And Finite Element Methods, Carl S. Pates Iii

Mechanical & Aerospace Engineering Theses & Dissertations

A coupled boundary element(BEM)-finite element(FEM) approach is presented to accurately model structure-acoustic interaction systems. The boundary element method is first applied to interior, two and three-dimensional acoustic domains with complex geometry configurations. Boundary element results are very accurate when compared with limited exact solutions.

Structure-interaction problems are then analyzed with the coupled FEM-BEM method, where the finite element method models the structure and the boundary element method models the interior acoustic domain. The coupled analysis is compared with exact and experimental results for a simplistic model. Composite panels are analyzed and compared with isotropic results. The coupled method is then …