Engineering Commons^™

Experimental Study Of Two-Phase Flow In A Liquid Cross-Flow And An Effervescent Atomizer, Mona Hassanzadeh Jobehdar

Electronic Thesis and Dissertation Repository

Effervescent atomization uses the internal gas-liquid mixture to produce spray. The behavior of two-phase flow inside the atomizer influences the spray characteristics and is dependent on the atomizer internal geometry and operating conditions. The present study is conducted in two parts; study of the bubble formation from a novel submerged nozzle in a liquid cross-flow and investigation of the internal and external two-phase flows in an effervescent atomizer.

The present study investigated the performance of a novel nozzle developed by Gadallah and Siddiqui (2013) in the liquid cross-flow. The impact of the nozzle shape, its configurations and orientations was experimentally …

A Phase-Angle Tracking Method For Synchronization Of Single- And Three-Phase Grid-Connected Converters, Farzam Baradarani

Electronic Thesis and Dissertation Repository

This thesis proposes a phase-angle tracking method, i.e., based on discrete Fourier transform for synchronization of three-phase and single-phase power-electronic converters under distorted and variable-frequency conditions. The proposed methods are designed based on fixed sampling rate and, thus, they can simply be employed for control applications. For three-phase applications, first, analytical analysis are presented to determine the errors associated with the phasor estimation using standard full-cycle discrete Fourier transform in a variable-frequency environment. Then, a robust phase-angle estimation technique is proposed, which is based on a combination of estimated positive and negative sequences, tracked frequency, and two proposed compensation coefficients. …

Tissue Engineering Scaffolds With Enhanced Oxygen Delivery Using A Cyclodextrin Inclusion Complex, Tierney Gb Deluzio

Electronic Thesis and Dissertation Repository

The development of a strategy to improve oxygen delivery to cells seeded on scaffolds is essential for the success of tissue engineering applications. The focus of this work was to explore the application of cyclodextrin inclusion complexes (CD:ICs) with perfluorocarbons as oxygen carriers. CD:ICs were prepared from alpha-cyclodextrin and perfluoroperhydrophenanthrene via co-precipitation, paste mixing, and dry mixing complexation techniques. Characterization indicated that paste mixing at a 2:1 host:guest ratio was the most effective method for complexation between the parent molecules. The CD:ICs were then successfully incorporated in 3D fibrous mats via electrospinning with poly(carbonate urethane) and polycaprolactone as biostable and …

Design And Assessment Of An Experimental Test Setup For Use In Studies On The Vibrational Response Of The Head To Impact, Claudia M. Blandford

Electronic Thesis and Dissertation Repository

With the mortality, disability and socioeconomic costs associated with head injury, head impact biomechanics is important to developing injury criterions and safety tolerances. However, the current state of knowledge is contradictory and vague. This thesis will contribute to research done on the vibrational response of the head to impact by discussing two studies. The first will describe the design, implementation and validation of a head impactor setup specific for the study of the frequency response of the skull. An impactor capable of producing sub-5ms duration, sub-fracture impacts was successfully designed. The apparatus was validated by comparing the results of a …

Size-Dependent Electroelastic Properties Of Piezoelectric Nanoplates, Zhengrong Zhang

Electronic Thesis and Dissertation Repository

With the development of nanotechnology, piezoelectric nanostructures have attracted a surge of interests in research communities for the potential applications as transistors, sensors, actuators, resonators and energy harvesters in nanoelectromechanical systems (NEMS) due to their high electromechanical coupling and unique features at the nano-scale. Piezoelectric nanomaterials have been characterized to possess size-dependent electromechanical coupling properties from both experimental and theoretical perspectives. Therefore it is of great importance to investigate the physical mechanisms of these distinct nano-scale structure features in order to fulfill the design and application of those piezoelectricity-based nanodevices.

Due to large surface to volume ratio and manifest strain …

Studies Of Anode Electrodes For The Biogenerator, Vahid Vajihinejad

Electronic Thesis and Dissertation Repository

The BioGenerator as a fundamentally new type of H₂-to-electricity conversion system offers a quite sustainable and cost effective solution to the challenges associated with the use of fuel cells in renewable power grids.The development of an anode electrode for the BioGenerator was subject of this work. The unique features of the BioGenerator require unique electrodes, and more specifically anode. The combination of biological cathodic liquid and the hydrogen gas fuel require specific hydrophobic/hydrophilic properties of the anode. Several different methods for anode formation were studied. The spreading technique was found to be most appropriate for the conditions in …

Micromechanics Modeling Of The Electrical Conductivity Of Carbon Nanotude (Cnt)- Polymer Nanocomposites, Chuang Feng

Electronic Thesis and Dissertation Repository

The addition of carbon nanotubes (CNTs) in polymers to form conductive composites has been attracting great interest from research and industry communities due to their potential applications. Experiments and simulations have demonstrated that the addition of a very small amount of CNTs into polymers can significantly improve the electrical conductivity of the composites. Such significant improvement in the electrical conductivity is attributed to two conductivity mechanisms: nanoscale electron hopping and microscale conductive networks. Understanding and prediction of the overall electrical conductivity of the composites with the incorporation of the conductivity mechanisms that underpin the macroscopic electrical properties are essential for …

The Effects Of Oar-Shaft Stiffness And Length On Rowing Biomechanics, Brock Laschowski

Electronic Thesis and Dissertation Repository

This work investigates the effects of oar-shaft stiffness and length on rowing biomechanics. The mechanical properties of the oar-shafts were examined using an end-loaded cantilever system, and theoretical relations were proposed between the mechanics of the oar-shafts and rowing performance. On-water experiments were subsequently conducted and rowing biomechanics measured via the PowerLine Rowing Instrumentation System. The PowerLine system measures force and oar angle on the oarlock, as well as proper boat acceleration. The convergent validity and test-retest reliability of the PowerLine force measurements were determined prior to the on-water experiments. Thereafter, rowers were tested over a set distance using oar-shafts …

Surfactant Assisted Dispersion Of Single-Walled Carbon Nanotubes In Polyvinylpyrrolidone Solutions, Tennison Yu

Electronic Thesis and Dissertation Repository

Obtaining stable aqueous dispersions is one of the main challenges hindering a widespread and effective use of single-walled carbon nanotubes (SWNT) in many applications. Although it has been recognized that their versatility makes them an extremely attractive material, the unique molecular structure that gives SWNTs their unmatched electronic, mechanical, and thermal properties is also responsible for strong van der Waals interactions. This, combined with extremely high aspect ratios and flexibility, causes SWNTs to adhere strongly into tightly bundled ropes. In these bundles, SWNTs are not as useful as their linearized unbundled equivalents. Thus, in order to take advantage of their …

Numerical Analysis Of Two Phase Flow And Heat Transfer In Condensers, Pooya Mirzabeygi

Electronic Thesis and Dissertation Repository

Steam surface condensers are commonly used in the power generation industry and their performance significantly affects the efficiency of the power plant. Therefore, it is vital to acquire a better understanding of the complex phenomena occurring inside condensers. A general three-dimensional numerical model is developed in this study to simulate the two-phase flow and heat transfer inside full-scale industrial condensers with irregular tube bundle shapes. The Eulerian-Eulerian two-phase model is selected to simulate gas and liquid flows and the interaction between them. A porous media approach is adopted to model the presence of large number of tubes in the condenser. …

Uncertainty Quantification For A Class Of Mems-Based Vibratory Angular Rate Sensors, Nujhat Abedin

Electronic Thesis and Dissertation Repository

Numerical schemes that are suitable for predicting response statistics of mass-spring and ring gyroscopes are developed when this class of vibratory gyroscopes are subjected to certain system parameters as well as environment uncertainties. The emphasis is placed on the steady-state part of the response since it is more critical to the operation of a gyroscope. A peak-picking approach which simulates the demodulation process which is used in practice is employed first before applying the Monte Carlo simulation method to predict the response statistics. A number of simulation trials to predict response statistics have been performed for mass-spring and ring-type gyroscopes …

Laser-Assisted Surface Modification Of Hybrid Hydrogels To Prevent Bacterial Contamination And Protein Fouling, Guobang Huang

Electronic Thesis and Dissertation Repository

Silicone hydrogels have been extensively studied in the fields of contact lenses, tissue engineering, and drug delivery due to their good biocompatibility, high oxygen permeability, and proper light transmission. However, their applications in biomedical devices are limited by protein adsorption and bacterial contamination because of the hydrophobic surface of silicone, which will cause more irreversible protein adsorption. Several physical methods can be applied to create a hydrophilic surface on hydrogels, such as spin coating, physical vapor deposition, dip coating, drop casting, etc. Compared to the conventional methods, the matrix assisted pulsed laser evaporation (MAPLE) is suitable to produce biopolymer/polymer film …

Rapid Segmentation Techniques For Cardiac And Neuroimage Analysis, Martin Rajchl

Electronic Thesis and Dissertation Repository

Recent technological advances in medical imaging have allowed for the quick acquisition of highly resolved data to aid in diagnosis and characterization of diseases or to guide interventions. In order to to be integrated into a clinical work flow, accurate and robust methods of analysis must be developed which manage this increase in data. Recent improvements in in- expensive commercially available graphics hardware and General-Purpose Programming on Graphics Processing Units (GPGPU) have allowed for many large scale data analysis problems to be addressed in meaningful time and will continue to as parallel computing technology improves. In this thesis we propose …

Automated Image Interpretation For Science Autonomy In Robotic Planetary Exploration, Raymond Francis

Electronic Thesis and Dissertation Repository

Advances in the capabilities of robotic planetary exploration missions have increased the wealth of scientific data they produce, presenting challenges for mission science and operations imposed by the limits of interplanetary radio communications. These data budget pressures can be relieved by increased robotic autonomy, both for onboard operations tasks and for decision- making in response to science data.

This thesis presents new techniques in automated image interpretation for natural scenes of relevance to planetary science and exploration, and elaborates autonomy scenarios under which they could be used to extend the reach and performance of exploration missions on planetary surfaces.

Two …

Enhancement Of Biohydrogen Production From Co-Fermentation Of Glucose, Starch, And Cellulose, Medhavi Gupta

Electronic Thesis and Dissertation Repository

The aim of this study was to assess the synergistic effects of co-fermentation of glucose, starch, and cellulose using anaerobic digester sludge (ADS) on the biohydrogen (H₂) production and the associated microbial communities. At initial pH of 5.5 and mesophilic temperature of 37 ºC, the H₂ yields were greater by an average of 27 ± 4% in all the different co-substrate conditions compared to the mono-substrate conditions, which affirmed that co-fermentation of different substrates improved the hydrogen potential. The sensitivity of mesophilic ADS to a temperature shock was also investigated. Unacclimatized mesophilic ADS responded well to a …

3d Fusion Of Histology To Multi-Parametric Mri For Prostate Cancer Imaging Evaluation And Lesion-Targeted Treatment Planning, Eli Gibson

Electronic Thesis and Dissertation Repository

Multi-parametric magnetic resonance imaging (mpMRI) of localized prostate cancer has the potential to support detection, staging and localization of tumors, as well as selection, delivery and monitoring of treatments. Delineating prostate cancer tumors on imaging could potentially further support the clinical workflow by enabling precise monitoring of tumor burden in active-surveillance patients, optimized targeting of image-guided biopsies, and targeted delivery of treatments to decrease morbidity and improve outcomes. Evaluating the performance of mpMRI for prostate cancer imaging and delineation ideally includes comparison to an accurately registered reference standard, such as prostatectomy histology, for the locations of tumor boundaries on mpMRI. …

Evaluating Human Performance For Image-Guided Surgical Tasks, Matthew Kenneth Kramers

Electronic Thesis and Dissertation Repository

The following work focuses on the objective evaluation of human performance for two different interventional tasks; targeted prostate biopsy tasks using a tracked biopsy device, and external ventricular drain placement tasks using a mobile-based augmented reality device for visualization and guidance. In both tasks, a human performance methodology was utilized which respects the trade-off between speed and accuracy for users conducting a series of targeting tasks using each device. This work outlines the development and application of performance evaluation methods using these devices, as well as details regarding the implementation of the mobile AR application. It was determined that the …

Estimation Of Hidden Markov Models And Their Applications In Finance, Anton Tenyakov

Electronic Thesis and Dissertation Repository

Movements of financial variables exhibit extreme fluctuations during periods of economic crisis and times of market uncertainty. They are also affected by institutional policies and intervention of regulatory authorities. These structural changes driving prices and other economic indicators can be captured reasonably by models featuring regime-switching capabilities. Hidden Markov models (HMM) modulating the model parameters to incorporate such regime-switching dynamics have been put forward in recent years, but many of them could still be further improved. In this research, we aim to address some of the inadequacies of previous regime-switching models in terms of their capacity to provide better forecasts …

Online Virtual Network Provisioning In Distributed Cloud Computing Data Centers, Khaled Mefarh Alhazmi

Electronic Thesis and Dissertation Repository

Efficient virtualization methodologies constitute the core of cloud computing data center implementation. Clients are attracted to the cloud model by the ability to scale available resources dynamically and the flexibility in payment options. However, performance hiccups can push them to return to the buy-and-maintain model. Virtualization plays a key role in the synchronous management of the thousands of servers along with clients' data residing on them. To achieve seamless virtualization, cloud providers require a system that performs the function of virtual network mapping. This includes receiving the cloud client requests and allocating computational and network resources in a way that …

Synthesis, Properties, And Applications Of Carboxylic Acid Functionalized Polyisobutylene, Inderpreet Sran

Electronic Thesis and Dissertation Repository

Polyisobutylene (PIB) and its copolymers are used in a wide range of commercial products owing to their high chemical stability, impermeability, elasticity, and biocompatibility. In this thesis, linear and arborescent PIB containing small percentages of isoprene (IP) were functionalized to provide different derivatives and their physical and biological properties were studied.

Potential For Photoacoustic Imaging Of Neonatal Brain, Pantea Tavakolian

Electronic Thesis and Dissertation Repository

Photoacoustic imaging is a hybrid imaging technique that combines many of the merits of both optical and ultrasound imaging. Photoacoustic imaging (PAI) has been hypothesized as a technique for imaging neonatal brain. However, PAI of the brain is more challenging than traditional methods (e.g. near infrared spectroscopy) due to the presence of the skull layer. To evaluate the potential limits the skull places on 3D PAI of the neonatal brain, we constructed a neonatal skull phantom (~1.52-mm thick) with a mixture of epoxy and titanium dioxide powder that provided acoustic insertion loss (1-5MHz) similar to human infant skull bone. The …

Influence Of Approach Flow Conditions On Urban Street Canyon Flow, Karin Blackman

Electronic Thesis and Dissertation Repository

The turbulent flow within a street canyon and the approaching boundary layer has been studied using idealized wind tunnel models and a semi-idealized field experiment conducted in Nantes, France. The effect of upstream roughness on street canyon flow (lateral length/height, L/h = 30) using either 3D (cube) or 2D (rectangular block) upstream roughness, of the same height as the canyon, has been studied for two streamwise canyon width to height aspect ratios (AR) of 1 and 3 using Particle Image Velocimetry. A further wind tunnel model of equivalent geometry to the field experiment was used to compare with flow data …

Curcumin-Loaded Magnetic Nanoaggregates Conjugated With Folic Acid For Targeted Cancer Treatment, Melessa Salem

Electronic Thesis and Dissertation Repository

Cancer has been, and still remains, one of the most complicated diseases to treat. As a result of the side effects experienced from current cancer treatment methods, there has been a growing interest in the development of targeted drug delivery systems that can destroy cancer cells, but render healthy tissue unharmed. To address this challenge, magnetite nanoaggregates were synthesized through the precipitation of iron oxide in the presence of polymers, conjugated with folic acid for folate targeting, and loaded with curcumin for cancer treatment. The resulting magnetite nanoparticles were 10 – 20 nm in size and the aggregates formed varied …

A Cfd Assisted Control System Design For Supercritical Water Cooled Reactor, Rohit V. Maitri

Electronic Thesis and Dissertation Repository

In this study, the methodology to construct a control system based on computational fluid dynamics (CFD) simulations is developed for supercritical water cooled reactor (SCWR). The CFD model using Reynolds Stress Model (RSM) and k-w SST model is validated with the experimental cases of steady state and vertically up flowing supercritical water in circular tubes for normal heat transfer and deteriorated heat transfer (DHT) cases. This model is extended to simulate the transient thermal-hydraulic behaviour of supercritical fluid flow and heat transfer, and the results are also compared with the 1-D numerical model, THRUST. The DHT phenomenon is investigated using …

Human Metaphase Chromosome Analysis Using Image Processing, Akila M.S Subasinghe Arachchige

Electronic Thesis and Dissertation Repository

Development of an effective human metaphase chromosome analysis algorithm can optimize expert time usage by increasing the efficiency of many clinical diagnosis processes. Although many methods exist in the literature, they are only applicable for limited morphological variations and are specific to the staining method used during cell preparation. They are also highly influenced by irregular chromosome boundaries as well as the presence of artifacts such as premature sister chromatid separation.

Therefore an algorithm is proposed in this research which can operate with any morphological variation of the chromosome across images from multiple staining methods. The proposed algorithm is capable …

Study Of High Pressure Steaming On Lipid Recovery From Microalgae, Ana-Maria Aguirre

Electronic Thesis and Dissertation Repository

Sustainable and clean fuels are in demand due to the perceived negative effects on health and environment with current use of fossil fuels. Lipids from microalgae offer a potential approach to obtain sustainable biofuels. In this study a two step process was adopted: investigation of culture conditions to find optimal points for lipid productivity and cellulose content, followed by an investigation of microalgae disruption for lipid recovery.

In the first phase of the research the effect of culture conditions on Chlorella vulgaris biomass concentration and the ratio of lipid productivity/cellulose content were studied. Response surface methodology was applied to optimize …

Functional Co-Substituted Poly[(Amino Acid Ester)Phosphazene] Biomaterials, Amanda L. Baillargeon

Electronic Thesis and Dissertation Repository

The development of new and improved biomaterials is essential for tissue engineering and regenerative medicine applications. Amino acid-based polyphosphazenes are being explored as scaffold materials for tissue engineering applications due to their non-toxic degradation products and tunable material properties. This work focuses on the synthesis of non-functional and novel functional poly[(amino acid ester)phosphazene]s using a facile method of thermal ring opening polymerization followed by one-pot room temperature substitution. The family of polyphosphazenes developed in this work is based on L-alanine (PNEAs), L-phenylalanine (PNEFs), and L-methionine (PNEMs) with L-glutamic acid imparting the functionality. Characterization of these materials demonstrated that the one-pot …

Effect Of Nozzle Geometry On Jet Bed Interaction: Experiments With Commercial Scale Nozzles And Eroded Nozzles, Nicholas A. Prociw

Electronic Thesis and Dissertation Repository

Liquid injection into fluidized bed reactors has several industrial applications, such as Fluid Catalytic Cracking, Gas Phase Polyethylene production, and Fluid Coking. High quality liquid distribution is essential to maximize the yield of desirable products, and minimize agglomeration.

The objectives of this thesis are: to develop a method that measures the rate of liquid released from agglomerates formed as a result of liquid injection into a fluidized bed; to use this method to determine the effect of internal erosion on nozzle performance; and to compare the performance of current commercial spray nozzles to nozzles with altered geometries. To achieve these …

Biostimulation Of Oil Refinery Soils, Thipphathong Vattaso

Electronic Thesis and Dissertation Repository

Oil refinery contaminated soils usually contain carcinogenic products, including polycyclic aromatic hydrocarbons (PAHs), and therefore require treatment for environmental and human protection. Biostimulation is the modification of external factors affecting the performance of indigenous bacteria and it may be employed to enhance natural attenuation at contaminated sites. Contaminated soil samples, provided by Imperial Oil (Sarnia, Ontario), were analyzed using pyrosequencing to sequence DNA strains in order to identify types of bacterial genus found in the samples. Flavobactericeae and Marinobacter were the two most dominant genus found in the sample, both recorded with the ability to degrade PAHs.

Favourable conditions and …

Plasmonic Optical Sensors: Performance Analysis And Engineering Towards Biosensing, Peipei Jia

Electronic Thesis and Dissertation Repository

Surface plasmon resonance (SPR) sensing for quantitative analysis of chemical reactions and biological interactions has become one of the most promising applications of plasmonics. This thesis focuses on performance analysis for plasmonic sensors and implementation of plamonic optical sensors with novel nanofabrication techniques.

A universal performance analysis model is established for general two-dimensional plasmonic sensors. This model is based on the fundamental facts of surface plasmon theory. The sensitivity only depends on excitation light wavelength as well as dielectric properties of metal and dielectrics. The expression involves no structure-specified parameters, which validates this formula in broad cases of periodic, quasiperiodic …