Engineering Commons^™

Design And Validation Of A Variable, Speed-Dependent Resistance Training Method For Muscle Hypertrophy, Alvaro Andres Aracena Alvial

Honors Undergraduate Theses

Muscle disorders and induced muscle atrophy impose critical risks to the well-being of an individual, limiting normal activities of daily living. Several resistance training methods have effectively reversed the progression of muscle atrophy. Weightlifting and hydrotherapy are the two widely practiced schemes for resistance training; however, there is the potential risk of excessive loads exerted on the muscles during weightlifting, and limited accessibility and cost are barriers to hydrotherapy. An alternative is using a resistance band. Some limitations include engaging multiple muscles/joints while only unidirectional resistance is feasible. To address these limitations, a VAriable Resistance Suit (VARS) was designed to …

Variational Autoencoder And Sensor Fusion For Robust Myoelectric Controls, Keith A. Currier

Honors Undergraduate Theses

Myoelectric control schemes aim to utilize the surface electromyography (EMG) signals which are the electric potentials directly measured from skeletal muscles to control wearable robots such as exoskeletons and prostheses. The main challenge of myoelectric controls is to increase and preserve the signal quality by minimizing the effect of confounding factors such as muscle fatigue or electrode shift. Current research in myoelectric control schemes are developed to work in ideal laboratory conditions, but there is a persistent need to have these control schemes be more robust and work in real-world environments. Following the manifold hypothesis, complexity in the world can …

A Numerical Analysis Of Shock Angles From Inward Turning Axisymmetric Flows, William L. Hilal

Honors Undergraduate Theses

Detonation-based propulsion systems are known for their high efficiency and energy release when compared to deflagrative systems, making them an ideal candidate in hypersonic propulsion applications. One such engine is the Oblique Detonation Wave (ODW) engine, which has a similar architecture to traditional scramjets but shortens the combustor and isolator to an anchored ODW after fuel injection.

Previous research has focused on using a two-dimensional wedge to induce an ODW while limiting total losses through the combustor. In this configuration, a two-dimensional wedge-based architecture entails a rectangular duct, limiting potential inlet design and increasing overall skin friction. However, an inward-turning …

Effectiveness Of Acoustic Design In Public Spaces, Jana V. Jirgens

Honors Undergraduate Theses

In this thesis, a discussion on the effectiveness of acoustic design in public spaces is made. The auditory properties of a location have noteworthy implications on the success of a building's design and how a room is perceived. Depending on the requirements of each location, either a reverberant or sound-absorbing approach is best suited for the environment. Moreover, public health is negatively affected by long-term involuntary noise exposure. Because of this, there is an obvious demand for continued and expanded study in acoustic design. This thesis aims to challenge interior design choices made in four testing locations: a classroom, a …

Comparing Phosphorus Removal Efficiencies And Mechanisms Via Two Cost-Effective Specialty Adsorbents In A Cascade Upflow Filtration System, Sydney Kilgus-Vesely

Honors Undergraduate Theses

Finding solutions to treat water that contains phosphorus is an important effort due to the harmful impacts it presents to both human health and the environment. Phosphorus is considered a limiting factor in water oftentimes and therefore controls the growth of algal bloom in a water body. The increase of algal populations due to wastewater effluent, stormwater runoff, and agricultural discharge in Florida waters has a direct link to the event of harmful algal blooms such as red tide in coastal regions, eutrophication of waterbodies, and fish kills. Finding low cost, energy efficient, and low maintenance green sorption media (GSM) …

Audible And Subaudible Components Of The First And Second Heart Sounds Using Phonocardiography And Seismocardiography, Daniella King

Honors Undergraduate Theses

Cardiovascular disease continues to be a leading cause of death in the United States, and a source of financial strain on the healthcare system. This prompts the need for new methods of low-cost, noninvasive technologies for cardiac monitoring to improve patient health and reduce healthcare costs. While the first and second heart sounds are common references that are listened to during auscultation of heart, seismocardiography (SCG) is a technology that detects chest sound vibrations with an accelerometer and may offer more information beyond the audible heart sounds. There is currently limited information regarding both the relationship between audible heart sounds …

An Optimization Study Of Small-Scale Propeller Blade, Fahad M. Nabid

Honors Undergraduate Theses

This research paper aims to investigate the optimization of smaller propeller blades to achieve maximum efficiency by studying the effect of the twist angle on reducing drag, increasing thrust, and preventing rapid wear on the blade. Inefficient propellers consume a significant amount of energy, particularly during low-speed flights. The low Reynolds number regime challenges aviation engineers to design propellers with the highest possible efficiency to minimize energy losses. The primary objective of this thesis is to optimize smaller propeller blade shapes to enable them to produce maximum efficiency. The advanced ratio of a propeller blade heavily influences the blade's performance …

Effect Of Autoclave Process Parameters On Mechanical Behaviors Of Carbon Fiber Reinforced Polymer Composites Fabricated Via Additive Manufacturing, Quang Hao Nguyen

Honors Undergraduate Theses

Additively manufactured carbon fiber reinforced polymers (CFRP) are vastly studied for their remarkable mechanical properties compared to most other 3D printed materials. Different methods were employed to further increase mechanical performance of CFRP 3D printed parts. The objective of the study is to investigate the effect of autoclave postprocessing on the interlaminar shear behavior between 3D printed CFRP layers. 3D printed CFRP samples were processed with nine combinations of temperature and vacuum in an autoclave. Short beam shear (SBS) tests were performed to characterize the interlaminar shear strength (ILSS) of the samples after autoclave processing. Digital image correlation (DIC) was …

Towards Explainable Ai Using Attribution Methods And Image Segmentation, Garrett J. Rocks

Honors Undergraduate Theses

With artificial intelligence (AI) becoming ubiquitous in a broad range of application domains, the opacity of deep learning models remains an obstacle to adaptation within safety-critical systems. Explainable AI (XAI) aims to build trust in AI systems by revealing important inner mechanisms of what has been treated as a black box by human users. This thesis specifically aims to improve the transparency and trustworthiness of deep learning algorithms by combining attribution methods with image segmentation methods. This thesis has the potential to improve the trust and acceptance of AI systems, leading to more responsible and ethical AI applications. An exploratory …

Expression Optimization Of The Gst-Gfp Fusion Protein Through The Alteration Of Induction Conditions, Matthew J. Vaccaro

Honors Undergraduate Theses

This research sought to determine which induction condition resulted in the greatest GST-GFP fusion protein expression. It will hopefully serve as a guide for future researchers trying to produce their own recombinant protein containing GST and GFP-tags. The CDNB Enzyme Assay was used to determine the quantity of GST-GFP fusion protein present and tested three variables: IPTG concentration, duration, and temperature of induction. The findings showed that IPTG concentration, temperature, and induction duration all had a significant impact on protein expression. Induction temperatures of 20 °C and 25 °C showed better protein expression at IPTG concentrations of 1.0 mM IPTG …

Silver Doped Nanoceria (Agcnp) Integrated Silk Scaffold For Chronic Wound Healing, Architha K. Venkatesan

Honors Undergraduate Theses

Chronic wound healing can be seriously impeded by the formation of biofilms, infections, peri-wound edema, hematoma, osteomyelitis, and the formation of reactive oxidative species (ROS). We hypothesize that a scaffold created from Silver-Doped Nanoceria (AgCNP) embedding silk can be beneficial to aid the wound healing process, inhibit inflammation and prevent microorganisms from forming a biofilm over the wound. Current wound healing methods such as intradermal injections are not advantageous to use since they can cause unwanted responses elsewhere in the body other than the wound site. Silk, however, has a positive impact on the wound healing effect and can be …

A Framework For The Automatic Identification Of Optimized Yield Surface Parameters, Kevin Hanekom

Honors Undergraduate Theses

Advanced engineering materials are designed to display tensile-compressive asymmetry (TCA) and anisotropy to provide unique attributes to critical components necessary in the hot section of turbines. The never-ending chase for higher efficiencies, and with them, higher temperature gradients, intrinsically leads to more and more of these complex materials, like single crystal turbine blades, embedded within the turbine environment. Mathematical models, known as yield criteria, allow engineers to visualize the mechanical behavior of these materials in various orientations under complex loading. Yield criteria are dependent on three key items in determination of their governing parameters: material test data, mathematical constraints, and …

Examining Direct Load Control Within Demand Response Programs, Maria Bonina Zimath

Honors Undergraduate Theses

The power system is a complex entity with unique plant designs, control systems, and market strategies. For many years, engineers have developed advanced technology to keep the grid efficient and balanced. With the rise of renewable sources, some new technology and programs must be developed to keep the quality of the power system. Unlike traditional power plants, renewable energy is highly dependent on environmental factors, such as sunlight and wind, meaning the generation depends on an unpredictable source of fuel. As the grid moves to more sustainable sources, the power market faces a growing challenge of less control over the …

A Holistic Work System Approach To Creating Flow During Transactional Work, Steven Clapp

Electronic Theses and Dissertations, 2020-

Psychological flow is a positive mental state where one is so fully concentrated in a challenging task that self-consciousness falls away, time seems to stand still, and the reward is the experience of meeting the challenge. Previous research on flow in the workplace has been performed on how to create conditions to promote its occurrence in workers, to describe its attendant individual and organizational benefits, and to measure it through self-reported means and physiologically. Such research has been focused on creative endeavors (such as the arts, sports, medicine, teaching), where individuals have high agency over the execution of activities needed …

Determination Of Damage Initiation Mechanisms In Aerospace Alloys Due To Stress Corrosion Cracking Via In-Situ Microscale Characterization Techniques, Remelisa Esteves

Electronic Theses and Dissertations, 2020-

Aluminum alloys are used on aerospace vehicles due to their high strength-to-weight ratio, formability and machinability. However, they become vulnerable to stress corrosion cracking (SCC) during their service life. SCC is primarily caused by the material's stress condition, a suitable corrosive environment and material susceptibility. It is also influenced by a mixture of electrochemical, mechanical, and chemical factors. Due to the complexity of SCC, tools with better resolution and sensitivity are needed to better understand the impact and interaction of the contributing factors. A vast amount of research has been done to study SCC behavior, but the scale of characterization …

Characterizing Air Plasma Sprayed Aluminum Oxide Coatings For The Protection Of Structures In Lunar Environments, Perla Latorre Suarez

Electronic Theses and Dissertations, 2020-

Wear-resistant ceramic and ceramic composite coatings are significant to provide durability and support long-duration missions to the moon's surface for rovers, landers, robotic systems, habitats, and many other components. On the Lunar surface, structural components are continuously exposed to lunar dust projectiles that can cause protective coating delamination around the affected area, of protective coatings and this may not be physically visible. Ceramic coatings, composed of alumina, present excellent resistance to different types of wear due to their high strength and hardness as well as the ability to protect structural components from regolith impacts, wear, and abrasive damage. Air Plasma …

Process Optimization And Characterization Of P-Type Copper Indium Oxide And Copper Chromium Oxide Transparent Conducting Thin Films And Its Applications, Fnu Sreeram Sundaresh

Electronic Theses and Dissertations, 2020-

Transparent conducting oxides (TCO) are a unique class of compounds that combine the properties of being optically transparent but at the same time are electrically conductive. TCOs are used in a variety of applications such as transparent contacts for solar cells, electrochromic windows, low-e windows, optoelectronic devices, light-emitting diodes, optical displays, UV sensors, defrosting windows, etc. By controlling doping and by adjusting the donor/acceptor levels, the conductivity of TCOs can be tuned from insulating via semiconducting to conducting. Various properties of TCOs such as optical transparency, bandgap, and electrical conductivity can be controlled using the aforementioned process. This concept paved …

Social Media-Based Crisis Communication: Analysis Of Twitter Data From Local Agencies During Hurricane Irma, Naiyara Noor

Electronic Theses and Dissertations, 2020-

As social media platforms have become vital means of communications, it has become imperative for emergency managers and policy makers to understand how people are interacting with different agencies on these platforms for enhancing community response coordination during disasters. Although many public agencies have already adopted social media platforms for crisis communication purposes, empirical evidence on whether and how these agencies are effectively engaged on these platforms is lacking. This research aims to examine crisis communication activities of a variety of agencies on Twitter in response to Hurricane Irma in 2017. In this study, we analyzed 13,353 hurricane-related tweets posted …

Multi-Material 3d Printing With Hybrid Direct Ink Writing-Volumetric Additive Manufacturing (Diw-Vam) System, Jose Zapata

Electronic Theses and Dissertations, 2020-

The rapid growth of 3D printing has led to many new iterations of additive manufacturing techniques. However, the current 3D printing techniques encompass only one printing method and have gradually expanded the ability to print multiple materials simultaneously. In this research, a hybrid 3D printing system is created by integrating direct ink writing (DIW) into volumetric additive manufacturing (VAM) to achieve multi-material printing. Compared to traditional DLP and SLA printing systems, the hybrid DIW-VAM system can create parts 95% faster. Meanwhile, the developed hybrid system takes advantages of DIW's precision to suspend a secondary liquid resin through extrusion into a …

Ocean Vector Wind Measurement Potential From The Global Precipitation Measurement Mission Using A Combined Active And Passive Algorithm, Alamgir Hossan

Electronic Theses and Dissertations, 2020-

Ocean surface vector wind (OVW) is an essential parameter for understanding the physics and dynamics of the ocean-atmosphere system, thereby improving weather forecasting and climate studies. Satellite scatterometers, synthetic aperture radars, and polarimetric microwave radiometers have provided almost global coverage of ocean surface vector wind for the last four decades. Nonetheless, a consistent and uninterrupted long-time data record with the capability of resolving sub-diurnal variability has remained a critical challenge over the years. The Global Precipitation Measurement Mission (GPM) is a satellite mission designed to provide space-based precipitation information on a global scale with complete diurnal sampling. This dissertation presents …

The Effect Of Wing Shape And Ground Proximity On Unsteady Fluid Dynamics During The Perching Maneuver., Dibya Raj Adhikari

Electronic Theses and Dissertations, 2020-

While landing, birds often perform a perching maneuver, which involves pitching their wings upwards while decelerating to a complete stop. By performing this perching maneuver, the birds can continue generating higher lift and drag force while slowing down, resulting in a smooth landing. The present study is motivated by the perching maneuver and aims to investigate two critical aspects of it. First, we want to explore how the proximity of the ground affects the unsteady forces and the flow field during the perching flight; and second, we want to analyze how a wing sweep influences a perching maneuver. To explore …

Adversarial Attacks, Coarse Robustness, And Dataless Neural Networks: Novel Techniques For Improved Classification And Combinatorial Optimization, Ismail Alkhouri

Electronic Theses and Dissertations, 2020-

Neural networks (NN) have become a central component in most machine learning systems. However, studies have shown that these models are not robust against adversarial attacks. As such, in this dissertation, we explore four directions. In the first direction, we investigate adversarial attacks on two hierarchical classification (HC) models: the Flat HC (FHC), and the Top-Down HC (TDHC). In particular, we formulate attacks against these models by using convex programming. Through experimental results, it is shown that FHCs are more robust than TDHCs. Second, we formalize a new notion of coarse robustness that is defined with respect to a specified …

Investigation Of Endothelial Mechanics On Primary Cell Functions: Endothelium Permeability And Wound Healing, Sean Beverung

Electronic Theses and Dissertations, 2020-

The endothelium composes the inner lining of blood vessels, the heart, and lymphatic vessels. Within the cardiovascular system, it is an extremely important structure, aiding in the regulation of blood pressure with the vascular tone, recruiting immune response, regulating the transfer of material in and out of the bloodstream, and the creation of new blood vessels through angiogenesis. The endothelium is composed entirely of endothelial cells. These cells lay in a flat squamous formation and are in direct contact with blood and aid in the regulation and transfer of material in and out of the bloodstream via active and passive …

An Evaluation Of Thermocouple Reconstruction Techniques, Derek Brauneis

Electronic Theses and Dissertations, 2020-

Temperature measurements can be difficult to obtain across many different harsh environments such as engine combustion chambers, engine exhaust temperatures, and explosion fireballs. While there are alternate methods to measure fluid temperature such as laser measurements, acoustic measurements, and camera imaging techniques, these methods can often be expensive, difficult to implement, and not able to see within the environment. Thermocouples are popular sensors because they are cheap and easy to implement across a wide range of applications and can measure temperature in areas where other methods cannot reach or see. However, while these sensors are very popular and versatile, they …

Nanostructured Alloy Thin Film Fabrication And Application For Zinc-Air Battery And Lithium-Ion Battery, Guanzhi Wang

Electronic Theses and Dissertations, 2020-

The depletion of unsustainable fossil fuels and growing environmental issues have given rise to scientific challenges and research interests in the development of renewable energy technologies to meet the rising global energy demand. Electrochemical energy storage and conversion technologies (ESCTs), such as lithium-ion batteries, metal-air batteries, supercapacitors, and fuel cells, etc., offer a clean and sustainable strategy for utilizing energy. As the core components, the electrode materials, including anodes, cathodes, and catalysts, play a direct decisive role in the device's performance in practical application. Therefore, the development of high-performance and low-cost electrode materials is critical for the success of these …

Enabling Large-Scale Transportation Electrification For Shared And Connected Mobility Systems, Md Rakibul Alam

Graduate Thesis and Dissertation 2023-2024

Owing to advancements in technology, substantial investments within the automotive industry, and the formulation of supportive state policies, the future landscape of the transportation sector is poised to witness a shift from traditional internal combustion engine vehicles (ICEVs) to electric vehicles (EVs). While EVs have made inroads in the market, they still face significant hurdles in the form of range anxiety and prolonged charging durations, inhibiting their widespread adoption. To tackle these challenges, a comprehensive approach to smart transportation electrification is proposed, emphasizing the pivotal roles of infrastructure development, particularly in the allocation of charging stations, and strategic operational decisions, …

Assessment Of Midblock Pedestrian Crossing Facilities Using Surrogate Safety Measures And Vehicle Delay, Nafis Anwari

Graduate Thesis and Dissertation 2023-2024

This dissertation has contributed to the pedestrian safety literature by assessing and comparing safety benefits and traffic efficiency among midblock Rectangular Rapid Flashing Beacon (RRFB) and Pedestrian Hybrid Beacon (PHB) sites. Video trajectory data were used to calculate pedestrian Surrogate Safety Measures (SSMs) and vehicles' delay. Regression models of SSMs and vehicles' delay revealed that PHB sites offer more safety benefits, at the expense of increased vehicles' delay, compared to RRFB sites. The presence of the PHB, weekday, signal activation, lane count, pedestrian speed, vehicle speed, land use mix, traffic flow, time of day, and pedestrian starting position from the …

Xps Study Of Calcium Lanthanum Sulfide Ceramics, Brian E. Butkus

Graduate Thesis and Dissertation 2023-2024

Long wave infrared (LWIR) optics that transmit in the 8 to 14 m wavelength range and, additionally, can withstand severe physical and thermal stresses are needed for advanced remote sensing, guidance and communication-based applications. However, most non-oxide transparent LWIR optics do not have the wider transmission range, nor the hardness and resistance to thermal shock needed for extreme environments. Because of these limitations, research is circling back to a promising material, calcium lanthanum sulfide (CLS), that could meet LWIR needs for extreme environments.

In this thesis, we will demonstrate the abilities of x-ray photoelectron spectroscopy (XPS) as a technique for …

Spatial Ensemble Distillation Learning Based Real-Time Crash Prediction And Management Framework, Md Rakibul Islam

Graduate Thesis and Dissertation 2023-2024

Real-time crash prediction is a complex task, since there is no existing framework to predict crash likelihood, types, and severity together along with a real-time traffic management strategy. Developing such a framework presents various challenges, including not independent and identically distributed data, imbalanced data, large model size, high computational cost, missing data, sensitivity vs. false alarm rate (FAR) trade-offs, estimation of traffic restoration time after crash occurrence, and real-world deployment strategy. A novel spatial ensemble distillation learning modeling technique is proposed to address these challenges. First, large-scale real-time data were used to develop a crash likelihood prediction model. Second, the …

A Generalized Accelerated Failure Time Model To Predict Restoration Time From Power Outages, Tasnuba Binte Jamal

Graduate Thesis and Dissertation 2023-2024

Major disasters such as wildfire, tornado, hurricane, tropical storm, flooding cause disruptions in infrastructure systems such as power outage, disruption to water supply system, wastewater management, telecommunication failures, and transportation facilities. Disruptions in electricity infrastructures have negative impacts on sectors throughout a region, including education, medical services, financial, and recreation sectors. In this study, we introduce a novel approach to investigate the factors which can be associated with longer restoration time of power service after a hurricane. Considering restoration time as the dependent variable and utilizing a comprehensive set of county-level data, we have estimated a Generalized Accelerated Failure Time …