Engineering Commons^™

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

Steel Deck Diaphragms: Characterizing The Hysteretic Behavior Of Light Gage Steel, Screw-Fastened, Support And Sidelap Connections And The Influence Of Support Connections On The Stability Behavior Of Panels, Divyansh Kapoor

Doctoral Dissertations

Steel deck diaphragms are planar structures that serve as critical components of a metal building’s lateral force-resisting system. These can be found in walls, floors, and roofs of metal buildings and aid with the lateral stability of the structure. The diaphragm design process involves the selection of materials, deck geometry, connections, and connection detailing across the steel panels. The American Iron and Steel Institute’s AISI S310 and Steel Deck Institutes DDM04 both provide design guidance on the selection and detailing of materials and fasteners for the applicable limit states of connections and stability of the panels. Both design codes provide …

Effect Of Type And Quantity Of Inherent Alkali Cations On Alkali-Silica Reaction, Pengfei Ma, Jiaoli Li, Jincheng Bai, Ying Zhuo, Lingyu Chi, Yanping Zhu, Zhenhua Shi, Hongyan Ma, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this study, the macroscopical expansion induced by alkali-silica reaction (ASR) and its corresponding ASR products are investigated using ordinary Portland cement (OPC) mortar specimens with a gradient of boosted alkalis. Experimental results show that the expansion increases with the concentration of inherent alkalis. Sodium-boosted samples expand approximately three times as much as potassium-boosted samples. ASR gels that are present in aggregate veins are calcium-free and amorphous; the atomic ratios of ASR gels are nearly independent of the type and quantity of alkali cations. Aggregate ASR gel exudation occurs in high (≥2.5 %) sodium cases and produces potential Na-shlykovite. Crystalline …

Ai-Based Bridge And Road Inspection Framework Using Drones, Hovannes Kulhandjian

Mineta Transportation Institute Publications

There are over 590,000 bridges dispersed across the roadway network that stretches across the United States alone. Each bridge with a length of 20 feet or greater must be inspected at least once every 24 months, according to the Federal Highway Act (FHWA) of 1968. This research developed an artificial intelligence (AI)-based framework for bridge and road inspection using drones with multiple sensors collecting capabilities. It is not sufficient to conduct inspections of bridges and roads using cameras alone, so the research team utilized an infrared (IR) camera along with a high-resolution optical camera. In many instances, the IR camera …

Meta-Analysis Of Insulated Concrete Wall Panel Design Methods For Shear And Flexure Behavior, Maryam Al-Bayati

Durham School of Architectural Engineering and Construction: Dissertations, Thesis, and Student Research

Insulated Concrete wall panels have been designed and constructed since the early 1950s with various shear ties, dimensions, and methods; nonetheless, thermal bridging and rational design are still a concern. Many companies have recently developed plastic connectors that have gradually replaced solid concrete sections and steel connectors due to their superior thermal efficiency and strength. However, there is no generally accepted method for predicting the behavior of sandwich wall panels in structural engineering practice or codes, but many methods have been used since the early 1920. This study aims to evaluate the accuracy of current methods for predicting the flexural …

Augmenting External Surface Pressures’ Predictions On Isolated Low-Rise Buildings Using Cfd Simulations, Md Faiaz Khaled, Aly Mousaad Aly

Faculty Publications

The aim of this paper is to enhance the accuracy of predicting time-averaged external surface pressures on low-rise buildings by utilizing Computational Fluid Dynamics (CFD) simulations. To achieve this, benchmark studies of the Silsoe cube and the Texas Tech University (TTU) experimental building are employed for comparison with simulation results. The paper is structured into three main sections. In the initial part, an appropriate domain size is selected based on the precision of mean pressure coefficients on the windward face of the cube, utilizing Reynolds Averaged Navier-Stokes (RANS) turbulence models. Subsequently, recommendations regarding the optimal computational domain size for an …

Semi-Annual Progress Report #12, Missouri University Of Science And Technology. Inspire - University Transportation Center

Semi-Annual Progress Reports

No abstract provided.

Robotic Inspection Of Infrastructure Using Vision, Gpr, And Impact-Echo Sensors, Jizhong Xiao

INSPIRE Archived Webinars

Bridges, dams, highways, and tunnels in the U.S. are reaching their life expectancy, and thus have imperative needs for routine inspection and maintenance to ensure sustainability. It is reported that 42% of over 600,000 highway bridges in the National Bridge Inventory (NBI) have exceeded their design life of 50 years, and 42,951 bridges are rated in poor condition and classified as "structurally deficient". To inspect the structurally integrity of bridges, the inspectors also need to detect subsurface defects (i.e., delamination, voids) using NDE instruments such as GPR and impact-echo (IE) device at difficult to access components (i.e., pier, bottom side …

An Investigation Into Ireland’S Bim Skills Gap, Guadalupe Centanni, Barry Mcauley

Conference Papers

The adoption of digital skills within the Irish AEC Sector has the potential to enhance efficiency and competitiveness among its stakeholders. Despite this opportunity, there is still a high demand for skilled BIM professionals, which cannot be currently met. To meet this skills demand and directly target future skills gaps within Ireland, several challenges must be addressed to facilitate broader BIM adoption. This paper focuses on addressing this gap by identifying steps to be followed to develop skilled professionals within BIM. This has been achieved by investigating the extent to which construction stakeholders in Ireland comprehend BIM and, examiningthe training …

Accelerating Bim Adoption In Ireland: A Ten-Year Review Of Cita Bim Gathering Proceedings, Alan Hore, Roger West, Barry Mcauley

Conference Papers

Digital construction interfaces have been studied extensively over the last few decades, with an ever-grow- ing catalogue of publications. The CitA BIM Gathering conferences have played a key role in bringing together the research and industry communities ina collaborative setting over the past decade in Ireland. In this paper the authors systematically review 10 years of papers published in the BIM Gathering pro- ceedings since the inaugural conference in 2013. A total of 175 papers involving over 200 authors have been reviewed and classified under the 2018 World Economic Forum (WEF) recommendations in respect to ac- celerating BIM adoption. The …

Industry Colloquium Report, Robert Moore

Reports

In the ever-evolving landscape of the construction industry, digital transformation has emerged as a pivotal force reshaping the way projects are conceived, executed, and delivered. This transformation, fuelled by cutting-edge technology and innovative practices, holds the promise of greater efficiency, sustainability, and collaboration within the construction sector.

This report offers a comprehensive summary of the Build Digital Project colloquium. It provides actionable insights and recommendations for clients, supply chain partners, and for prioritisation within the Build Digital Project pillars. As the industry partners seek to build a more efficient, sustainable, and collaborative construction sector, understanding and harnessing the invaluable insights …

Application Of Wavelet Analysis And Random Field In Integrity Management Of Pipelines Containing Dents And Corrosions, Junxiong Lin

Electronic Thesis and Dissertation Repository

Metal loss corrosions and dents are two major threats to the integrity of oil and natural gas pipelines. In the pipeline industry, the Fitness-For-Service (FFS) assessment is commonly employed for pipelines containing these defects. However, FFS assessment usually assumes that a defect has a simple shape, and such a simplification may significantly affect the accuracy of the assessment. Therefore, retaining the actual shapes of defects and incorporating them into the FFS assessment can improve assessment accuracy. The main objective of the present thesis is to extract key information about the sizes, directions, and shapes of corrosions and dents from the …

Challenges In Optimization For The Performance On Sustainability Dimensions In Reverse Logistics Social Responsibility, Sumarsono Sudarto, Katsuhiko Takahashi, Mochammad Dewo

Makara Journal of Technology

Reverse logistics social responsibility is preferred as the most acceptable solution for addressing the challenges in stakeholders’ debate regarding social responsibility in supply chains because it involves as many actors as possible in the supply chain to perform social responsibility to achieve sustainability. This paper explores the challenges in achieving optimal policies in sustainability dimensions for collection and recycling facilities in reverse logistics. Sustainability dimensions include economic, environmental, and social aspects. The reverse logistics is modeled on System Dynamics, and a simplified statistical analysis using a contour chart is employed in numerical experiments. Results show a narrow area of optimal …

Investigating The Resistance Properties Of Concrete Containing Waste Carpet Fibers, Faezeh Nejati, Ali Mahboobi

Makara Journal of Technology

This research was conducted with the aim of investigating the use of waste carpet fiber (WCF) and assessing the resistance properties of concrete. The main goal of this study was to investigate the effect of the internal processing of concrete containing WCF on increasing its resistance properties. At the same time, the secondary goals pursued in the research included determining the optimal percentages of carpet fibers in improving compressive strength, tensile strength, and bending strength. The materials used included cement, aggregates, water, WCF, and super lubricant. This research applied seven mixing designs: A, B1, B2, C1, C2, D1, and D2. …

Parametric Analysis And Enhancement Of The Burst Capacity Model For Composite-Repaired Corroded Pipelines, Rodrigo Silva Silva-Santisteban

Electronic Thesis and Dissertation Repository

One of the main causes of pipeline failures is corrosion, which leads to a localized loss of the pipe wall thickness and hence compromises the capacity of the pipeline. Composite repair is a method to rehabilitate corroded pipelines. Design codes such as ASME PCC-2 are commonly used to design the repair thickness. As the predictive accuracy to determine the burst capacity of a composite repaired pipeline with existing models is generally poor, the main objective of the present thesis is to provide insights on the parameters that affect the burst capacity and propose improvements to the prediction of burst capacity …

Improving Square Skirted Foundations Behavior On Sand, Tamer Al-Shyoukhi, Ayman Altahrany, Mahmoud Elmeligy

Mansoura Engineering Journal

Shallow foundations' behavior is enhanced by using skirts to confine the soil beneath the foundation. The bearing capacity and settlement of skirted foundations resting on the sand are influenced by the size of the skirt cell and shear strength of sand. Experimental modelling was carried out on an axially square-skirted footing resting on sand in this study. Plaxis-3D software was used for numerical analysis to support the experimental results. The numerical analysis results validated the experimental results. The outcomes of the study demonstrated that skirts wider than the footing size increased the bearing capacity of skirted foundations. In the case …

Skills Matter – Up-Skilling Across Construction Stakeholders For Emerging Roles, Avril Behan, Paul Mccormack, Barry Mcauley

Conference Papers

The EU’s Climate Target Plan To 2030 (European Union 2020b) of achieving at least 55% reduction in Green House Gas emissions from 1990 levels, delivering towards a climate-neutral economy by 2050, requires systems-level change in the way we design, construct, and operate our built assets. Funding initiatives, such as co-ordinated by BUILD UP Skills, aim to deliver upskilling to the market but targets set by the European Skills Agenda may not be reached at current achievement levels. This paper presents the results of one completed and the progress of one ongoing Horizon 2020 funded project, BIMcert and ARISE, respectively. Learning …

Investigating The Effect Of Bead Geometry On Fiber Orientation And Thermomechanical Properties For Large-Format Extrusion-Based Additive Manufacturing, Joanna F. Keaton

Electronic Theses and Dissertations

In large-format extrusion-based additive manufacturing of polymer composites, the relationship between material properties and processing parameters requires further investigation. This thesis focuses on the relationship between fiber orientation and thermomechanical properties for short fiber-filled thermoplastic polymer systems manufactured by extrusion-based additive manufacturing. Fiber orientation is particularly important in determining the thermomechanical properties of the composite material as properties in the direction of deposition are expected to be higher for highly aligned fibers than randomly aligned fibers. Fiber orientation distribution, which is related to processing parameters and deposition conditions, can be efficiently represented by the orientation tensor. The orientation tensor can …

Investigation Of Ground Deformations And Vibrations Due To Impact Pile Driving: Measurements And Prediction Model, Berk Turkel

Electronic Theses and Dissertations, 2020-

Pile driving, a commonly used method for installing deep foundations, has gained prominence as a foundation solution to transfer structural loads to deep competent strata. However, this method of installation can generate noise, ground vibrations, and deformations. These effects pose risks to adjacent structures and buried utilities, jeopardizing the safety and serviceability of urban infrastructure. Researchers and public and private agencies have proposed many vibration limit criteria to avoid damage to infrastructure. However, these criteria for construction vibrations are not linked to the ground densification associated with repetitive and cumulative loadings in sandy soils. This dissertation focuses on developing a …

The Current State Of Practice Of Building Information Modeling, Kevin P. Brooks

Masters Theses

Building Information Modeling (BIM) has become extremely prominent in the construction industry in the past twenty years. It serves as a digital repository that can, when used to its fullest potential, combine all aspects of designing, building, and managing a structure in one place, alongside all the data produced in those processes. The construction industry has to date struggled to increase productivity alongside similar fields, such as the manufacturing industry, though the construction industry generally has far more stakeholders on one project than the manufacturing industry. Further, building designs are becoming more complex while project schedules are becoming tighter. As …

The Effects Of Hurricane Wind Field Characteristics On Wind Blade Loads, Michael S. Tsai

Masters Theses

Over recent years, offshore wind energy has been growing around the world. This necessitates placing wind turbines directly in or near the oceans where hurricanes can be. Previous research has suggested that hurricane wind veer and direction change can have adverse loading effects on the turbine. Such effects can create damage to the blade or worsen existing ones. Currently, there is no known design standard for addressing wind veer and direction change specifically from hurricanes. Quantifying the loading contribution from these phenomena is not abundant either.

This thesis seeks to demonstrate a proposed procedure for defining design veer profiles and …

Post-Fire Damage Inspection Of Concrete Tunnel Structures, James Viglas

Masters Theses

In general, tunnels are designed with an abundance of safety regarding structural integrity, however, there can be uncertainty related to structural performance after a fire event. The residual condition of a tunnel after a fire is dependent on fire intensity and duration. The goal of this study is to correlate visual and material characteristics of structural and non-structural components of tunnels with fire temperature and exposure time. This can be further related to the residual capacity of structural members in a tunnel, providing insight into safety and overall functionality. Experimental results show that the visual response of materials with heat …

Improved Vehicle-Bridge Interaction Modeling And Automation Of Bridge System Identification Techniques, Omar Abuodeh

All Dissertations

The Federal Highway Administration (FHWA) recognizes the necessity for cost-effective and practical system identification (SI) techniques within structural health monitoring (SHM) frameworks for asset management applications. Indirect health monitoring (IHM), a promising SHM approach, utilizes accelerometer-equipped vehicles to measure bridge modal properties (e.g., natural frequencies, damping ratios, mode shapes) through bridge vibration data to assess the bridge's condition. However, engineers and researchers often encounter noise from road roughness, environmental factors, and vehicular components in collected vehicle signals. This noise contaminates the vehicle signal with spurious modes corresponding to stochastic frequencies, impacting damage monitoring assessments. Thus, an efficient and reliable SI …

Fiber-Based Seismic Damage And Collapse Assessment Of Reinforced Concrete Single-Column Pier-Supported Bridges Using Damage Indices, Yu-Fu Ko, Jessica Gonzalez

Mineta Transportation Institute Publications

Near-fault earthquakes can have major effects on transportation systems due to the structural damage they impose on bridges. Therefore, it is imperative to assess the seismic damage of bridges appropriately, and this research focuses on reinforced concrete (RC) bridges. This research advances the seismic performance assessment of RC single-column pier-supported bridges with flexural failure under near-fault ground motion by use of ductility coefficients and damage indices. The methodology included modeling fiber-based nonlinear beam-column elements to simulate the damage development process of RC bridge piers under earthquake loadings, considering the global buckling of longitudinal steel bars, examining the cracking and spalling …

Experimental Investigation Of The Long-Term Bending Deflection And Creep Performance Of Cross-Laminated Timber (Clt), Aaron Desantis

All Theses

Rising popularity in mass timber construction for residential and commercial projects has escalated the need to develop and increase understanding of mass timber products both from a strength and serviceability perspective. For cross-laminated timber (CLT) there is a significant lack of research on the creep characteristics also known as long-term deflection behavior. Creep is particularly important for products such as CLT that are used for floors with longer spans. Full-scale creep testing was conducted using 5-ply CLT panels over the course of 6 months in a controlled environment under dry service condition. Testing resulted in average final deflections 1.73 times …

Effect Of Transverse Post-Tensioning On Moment Distribution Between Channel Girders, William Eubanks

All Theses

This thesis investigates the strength of prestressed concrete channel girders used

in bridges in South Carolina and how to improve their load distribution. The specimens

are 30 feet in length, 33 inches wide and 17 inches deep. South Carolina has 377 bridges

containing prestressed concrete channel girders and many of these bridges received a

poor load rating in a recent load rating project conducted by the South Carolina

Department of Transportation (SCDOT). The research included flexural testing of seven

individual channel girders and load distribution tests of three transversely post-tensioned

channel girders. Individual flexural testing was done to determine the …

Machine Learning-Based Seismic Damage Assessment Of Residential Buildings Considering Multiple Earthquake And Structure Uncertainties, Xinzhe Yuan, Liujun Li, Haibin Zhang, Yanping Zhu, Genda Chen, Cihan H. Dagli

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Wood-frame structures are used in almost 90% of residential buildings in the United States. It is thus imperative to rapidly and accurately assess the damage of wood-frame structures in the wake of an earthquake event. This study aims to develop a machine-learning-based seismic classifier for a portfolio of 6,113 wood-frame structures near the New Madrid Seismic Zone (NMSZ) in which synthesized ground motions are adopted to characterize potential earthquakes. This seismic classifier, based on a multilayer perceptron (MLP), is compared with existing fragility curves developed for the same wood-frame buildings near the NMSZ. This comparative study indicates that the MLP …

Development And Characterization Of Coal-Based Thermoplastic Composite Material For Sustainable Construction, Haibin Zhang, Wenyu Liao, Genda Chen, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The exploitation of coal and the disposal of waste plastic present significant environmental and economic challenges that require sustainable and profitable solutions. In response, we propose a renewable construction composite material of coal-based thermoplastic composite (CTC) that can be made from low-grade coal and plastic waste. We developed and tested the hot-press fabrication method for this CTC, using coal with a maximum particle size of 4.75 mm and recycled high-density polyethylene (HDPE). The effects of the coal fraction (50–80 wt.%) on compressive properties, thermal properties, microstructure, and ecological and economic efficiencies of the CTC were investigated. Test results revealed that …

Vibration Fatigue Of Leaded Solder Joint Interconnects For Pcb Electronics, John Crowder

All Theses

With the increasing prevalence of electronic equipment worldwide, there is also a decrease in the size of the components on their printed circuit boards (PCBs), leading to an increase in the density of these components. A significant amount of failure in electronic equipment is vibration fatigue of solder joints and their attachments. However, the complexity of these PCBs and their components has made finite element modeling (FEM) more complex, adding considerable time to create and analyze a model.

This paper aims to provide a literature review for the vibration fatigue of leaded solder components, create a test setup, and validate …