Engineering Commons^™

Implementation Of Fluid Viscous Damper For 2023 Eeri Seismic Design Competition, Dalton J. Muck, Payton S. Mcgee, Payton R. Filippin, Tynan Castro

Architectural Engineering

The authors of this report were a part of the 2023 Earthquake Engineering Research Institute (EERI) student chapter for California Polytechnic State University, San Luis Obispo (Cal Poly). With thirteen other team members, they traveled to San Francisco, CA to compete in the Seismic Design Competition (SDC) hosted by EERI. The team was tasked with preparing a written proposal, design and computer analysis of the structural system, construction of two physical models, as well as creation of a poster and a presentation for a proposed mid-rise building located in the competition host city. The goal of the design of Cal …

Floating Offshore Wind Turbine Analysis And Discovery, Payton Maddaloni

Honors Theses and Capstones

No abstract provided.

Early-Age Strength And Failure Characteristics Of 3d Printable Polymer Concrete: Numerical Modelling And Experimental Testing, Mohammad Amin Dehghani Najvani

Civil Engineering ETDs

The time-dependent rheological and early-age strength parameters of Polymer concrete (PC) were investigated. PC flow decreased, and the static yield stress and thixotropy increased as the specimen aged, while the dynamic yield stress remained unchanged. The study found that the Herschel-Bulkley model can accurately describe the PC’s rheological behavior over time. The change in cohesion strength and internal friction angle over time was observed using uniaxial unconfined compression and direct shear tests of fresh PC. A time-dependent MohrCoulomb failure criterion was established. Temperature analysis was used to determine the gel time and explain the evolution of the time-dependent early-age strength …

Analysis Of Loading Rate, Fiber Orientation And Material Composition Through Image Processing And Digital Volume Correlation In High Performance Concrete, Aidan R. Carlson

Electronic Theses and Dissertations

Ultra High Performance Concrete (UHPC) and High Performance concrete (HPC) is characterized by high compressive strength and high toughness. This is achieved through maximizing the particle packing density in the matrix and the use of fibers to reinforce the matrix, increasing the materials toughness. The interactions of fibers and the matrix during loading is quite complex and involves several different energy dissipation mechanisms. The goal of this work and this thesis is to investigate these interactions and identify any changes in material response, and hope that these changes may be useful for the design of UHPC moving forward.

In this …

Functional Cementitious Composites With Micro-Sized Particulate Fillers For Additive Construction And Energy-Efficient Buildings, Adam Brooks

Doctoral Dissertations

With a growing energy demand, the development of sustainable and energy efficient building materials is growing rapidly. Numerous researches have focused on low carbon footprint construction materials, high-performance thermal insulations, high-performance façade, and thermal energy storage. Among these, the development of functional cementitious composites has attracted significant attention due to its potential utilities in building energy reduction and decarbonatization efforts. For example, fly ash cenospheres have been used as micro-size lightweight fillers to achieve low density and thermal conductivity. The use of phase change materials (PCM) in concrete has been studied to answer energy demands. While their inclusion into concrete …

Self-Consolidating Concrete Design For Drilled Shaft Structural Applications, Grady S. Caton

Graduate Theses and Dissertations

Self-consolidating concrete (SCC) is a relatively new concrete technology which allows the concrete to be placed without the need for manual or machine vibration. This innovation reduces labor costs, construction times, and can provide a smooth, finished surface. However, this technology is used in the United States primarily in the precast and prestressed concrete industry. The utility of SCC in structural applications, such as areas of dense reinforcement or locations where complex geometry makes consolidation impossible, is also advantageous. In this study, a series of SCC mixtures were developed both with and without fly ash replacement. These mixtures were then …

Comparing In-Situ Liquefaction Triggering Procedures For Sites In Arkansas, Sagar Barua

Graduate Theses and Dissertations

There currently exists a significant amount of uncertainty when designing piles for bridge foundations in liquefiable soil. Currently ARDOT engineers use a Standard Penetration Test (SPT) based liquefaction spreadsheet developed 10 years ago to evaluate liquefaction triggering. Since this spreadsheet was developed, updates to the liquefaction triggering procedures have been published making the spreadsheet out-of-date. Moreover, additional methods of liquefaction evaluation using cone penetration test (CPT) and shear wave velocity (Vs) provide added means of evaluating liquefaction potential. This thesis updates ARDOT's liquefaction triggering evaluation methodology with the newest procedures and incorporates additional empirical liquefaction hazard estimates such as the …

Modular Composite Sandwich Structures For Thermal And Structural Retrofitting Of Existing Buildings, Marc Al Ghazal

Masters Theses

Around 40% of global energy consumption and 30% of worldwide carbon dioxide (CO2) emissions are attributed to buildings. Most of this consumption is dedicated to ensuring thermal comfort. The goal of this research was to develop and field validate retrofit solutions to improve the energy efficiency of buildings. Exterior cladding panels were designed and tested to ensure adequate thermal and structural performance. Sandwich panels (glass fibers reinforced polymer (GFRP) skins and polymeric foam cores) were fabricated using the vacuum assisted resin transfer molding (VARTM) process. Extruded polystyrene (XPS) and polyurethane (PU) foams were compared as core materials through a series …

Improvement Of Rotation Capacity Of Composite Beam-To-Hss Column Connections Using External Horizontal Stiffeners, Mahdi Afshar Arjmand

Master's Theses

Improvement of Rotation Capacity of Composite Beam-to-HSS Column Connections Using External Horizontal Stiffeners

Mahdi Afshar Arjmand

This thesis focuses on the analysis of out-of-plane deformation (OOP) in column flange located in the panel zone of composite beam-to-column steel connection, as a critical aspect of steel structural engineering. This type of connection is an integral component of steel structures, and understanding their behavior is essential for ensuring safety and performance. The investigation involves examining the causes, factors influencing, and potential mitigation strategies for out-of-plane deformation of HSS flange column in these connections. Beam-to-column connections play a vital role in transferring loads …

Effect Of Latex Modified Concrete Overlays With Reduced Surface Preparation On The Load Distribution And Flexural Strength Of Channel Girders, Samuel Dodd

All Theses

This thesis investigates the use of a Latex Modified Concrete (LMC) overlay to increase the strength of prestressed channel girders and enhance their ability to distribute load. The research conducted in this thesis involved material testing of several different LMC mixes and flexural testing of an LMC overlay and girder system. The material testing was used to determine a reasonable LMC mix design and surface preparation method to be used for the overlay. Based on material testing it was concluded that a rapid-set mix and pressure washing of the girder surfaces were a reasonable mix design and surface preparation for …

Steel Deck Diaphragms: Characterizing The Hysteretic Behavior Of Light Gage Steel, Screw-Fastened, Support And Sidelap Connections And The Influence Of Support Connections On The Stability Behavior Of Panels, Divyansh Kapoor

Doctoral Dissertations

Steel deck diaphragms are planar structures that serve as critical components of a metal building’s lateral force-resisting system. These can be found in walls, floors, and roofs of metal buildings and aid with the lateral stability of the structure. The diaphragm design process involves the selection of materials, deck geometry, connections, and connection detailing across the steel panels. The American Iron and Steel Institute’s AISI S310 and Steel Deck Institutes DDM04 both provide design guidance on the selection and detailing of materials and fasteners for the applicable limit states of connections and stability of the panels. Both design codes provide …

Application Of Wavelet Analysis And Random Field In Integrity Management Of Pipelines Containing Dents And Corrosions, Junxiong Lin

Electronic Thesis and Dissertation Repository

Metal loss corrosions and dents are two major threats to the integrity of oil and natural gas pipelines. In the pipeline industry, the Fitness-For-Service (FFS) assessment is commonly employed for pipelines containing these defects. However, FFS assessment usually assumes that a defect has a simple shape, and such a simplification may significantly affect the accuracy of the assessment. Therefore, retaining the actual shapes of defects and incorporating them into the FFS assessment can improve assessment accuracy. The main objective of the present thesis is to extract key information about the sizes, directions, and shapes of corrosions and dents from the …

Parametric Analysis And Enhancement Of The Burst Capacity Model For Composite-Repaired Corroded Pipelines, Rodrigo Silva Silva-Santisteban

Electronic Thesis and Dissertation Repository

One of the main causes of pipeline failures is corrosion, which leads to a localized loss of the pipe wall thickness and hence compromises the capacity of the pipeline. Composite repair is a method to rehabilitate corroded pipelines. Design codes such as ASME PCC-2 are commonly used to design the repair thickness. As the predictive accuracy to determine the burst capacity of a composite repaired pipeline with existing models is generally poor, the main objective of the present thesis is to provide insights on the parameters that affect the burst capacity and propose improvements to the prediction of burst capacity …

Investigating The Effect Of Bead Geometry On Fiber Orientation And Thermomechanical Properties For Large-Format Extrusion-Based Additive Manufacturing, Joanna F. Keaton

Electronic Theses and Dissertations

In large-format extrusion-based additive manufacturing of polymer composites, the relationship between material properties and processing parameters requires further investigation. This thesis focuses on the relationship between fiber orientation and thermomechanical properties for short fiber-filled thermoplastic polymer systems manufactured by extrusion-based additive manufacturing. Fiber orientation is particularly important in determining the thermomechanical properties of the composite material as properties in the direction of deposition are expected to be higher for highly aligned fibers than randomly aligned fibers. Fiber orientation distribution, which is related to processing parameters and deposition conditions, can be efficiently represented by the orientation tensor. The orientation tensor can …

Investigation Of Ground Deformations And Vibrations Due To Impact Pile Driving: Measurements And Prediction Model, Berk Turkel

Electronic Theses and Dissertations, 2020-

Pile driving, a commonly used method for installing deep foundations, has gained prominence as a foundation solution to transfer structural loads to deep competent strata. However, this method of installation can generate noise, ground vibrations, and deformations. These effects pose risks to adjacent structures and buried utilities, jeopardizing the safety and serviceability of urban infrastructure. Researchers and public and private agencies have proposed many vibration limit criteria to avoid damage to infrastructure. However, these criteria for construction vibrations are not linked to the ground densification associated with repetitive and cumulative loadings in sandy soils. This dissertation focuses on developing a …

The Current State Of Practice Of Building Information Modeling, Kevin P. Brooks

Masters Theses

Building Information Modeling (BIM) has become extremely prominent in the construction industry in the past twenty years. It serves as a digital repository that can, when used to its fullest potential, combine all aspects of designing, building, and managing a structure in one place, alongside all the data produced in those processes. The construction industry has to date struggled to increase productivity alongside similar fields, such as the manufacturing industry, though the construction industry generally has far more stakeholders on one project than the manufacturing industry. Further, building designs are becoming more complex while project schedules are becoming tighter. As …

The Effects Of Hurricane Wind Field Characteristics On Wind Blade Loads, Michael S. Tsai

Masters Theses

Over recent years, offshore wind energy has been growing around the world. This necessitates placing wind turbines directly in or near the oceans where hurricanes can be. Previous research has suggested that hurricane wind veer and direction change can have adverse loading effects on the turbine. Such effects can create damage to the blade or worsen existing ones. Currently, there is no known design standard for addressing wind veer and direction change specifically from hurricanes. Quantifying the loading contribution from these phenomena is not abundant either.

This thesis seeks to demonstrate a proposed procedure for defining design veer profiles and …

Post-Fire Damage Inspection Of Concrete Tunnel Structures, James Viglas

Masters Theses

In general, tunnels are designed with an abundance of safety regarding structural integrity, however, there can be uncertainty related to structural performance after a fire event. The residual condition of a tunnel after a fire is dependent on fire intensity and duration. The goal of this study is to correlate visual and material characteristics of structural and non-structural components of tunnels with fire temperature and exposure time. This can be further related to the residual capacity of structural members in a tunnel, providing insight into safety and overall functionality. Experimental results show that the visual response of materials with heat …

Improved Vehicle-Bridge Interaction Modeling And Automation Of Bridge System Identification Techniques, Omar Abuodeh

All Dissertations

The Federal Highway Administration (FHWA) recognizes the necessity for cost-effective and practical system identification (SI) techniques within structural health monitoring (SHM) frameworks for asset management applications. Indirect health monitoring (IHM), a promising SHM approach, utilizes accelerometer-equipped vehicles to measure bridge modal properties (e.g., natural frequencies, damping ratios, mode shapes) through bridge vibration data to assess the bridge's condition. However, engineers and researchers often encounter noise from road roughness, environmental factors, and vehicular components in collected vehicle signals. This noise contaminates the vehicle signal with spurious modes corresponding to stochastic frequencies, impacting damage monitoring assessments. Thus, an efficient and reliable SI …

Experimental Investigation Of The Long-Term Bending Deflection And Creep Performance Of Cross-Laminated Timber (Clt), Aaron Desantis

All Theses

Rising popularity in mass timber construction for residential and commercial projects has escalated the need to develop and increase understanding of mass timber products both from a strength and serviceability perspective. For cross-laminated timber (CLT) there is a significant lack of research on the creep characteristics also known as long-term deflection behavior. Creep is particularly important for products such as CLT that are used for floors with longer spans. Full-scale creep testing was conducted using 5-ply CLT panels over the course of 6 months in a controlled environment under dry service condition. Testing resulted in average final deflections 1.73 times …

Effect Of Transverse Post-Tensioning On Moment Distribution Between Channel Girders, William Eubanks

All Theses

This thesis investigates the strength of prestressed concrete channel girders used

in bridges in South Carolina and how to improve their load distribution. The specimens

are 30 feet in length, 33 inches wide and 17 inches deep. South Carolina has 377 bridges

containing prestressed concrete channel girders and many of these bridges received a

poor load rating in a recent load rating project conducted by the South Carolina

Department of Transportation (SCDOT). The research included flexural testing of seven

individual channel girders and load distribution tests of three transversely post-tensioned

channel girders. Individual flexural testing was done to determine the …

Vibration Fatigue Of Leaded Solder Joint Interconnects For Pcb Electronics, John Crowder

All Theses

With the increasing prevalence of electronic equipment worldwide, there is also a decrease in the size of the components on their printed circuit boards (PCBs), leading to an increase in the density of these components. A significant amount of failure in electronic equipment is vibration fatigue of solder joints and their attachments. However, the complexity of these PCBs and their components has made finite element modeling (FEM) more complex, adding considerable time to create and analyze a model.

This paper aims to provide a literature review for the vibration fatigue of leaded solder components, create a test setup, and validate …

Xenabloom, Sophia Maglabe, Ryer Lauth, Elizabeth Shaw, Sheyna Rongong

Architectural Engineering

Proposal for an architectural and structural design of a shade structure at the Leaning Pine Arboretum, employing the Xenaform typology of Poly Shells, LLC.

Experimental Characterization And Computer Vision-Assisted Detection Of Pitting Corrosion On Stainless Steel Structural Members, Riley J. Muehler

Master's Theses

Pitting corrosion is a prevalent form of corrosive damage that can weaken, damage, and initiate failure in corrosion-resistant metallic materials. For instance, 304 stainless steel is commonly utilized in various structures (e.g., miter gates, heat exchangers, and storage tanks), but is prone to failure through pitting corrosion and stress corrosion cracking under mechanical loading, regardless of its high corrosion resistance. In this study, to better understand the pitting corrosion damage development, controlled corrosion experiments were conducted to generate pits on 304 stainless steel specimens with and without mechanical loading. The pit development over time was characterized using a high-resolution laser …

Investigation Of Natural Pozzolans: Analyzing The Practicality Of Natural Pozzolans As A Partial Substitute For Cement In Grout Production, Jadyn I. Breien, Andrew J. Baro, Logan T. Marino

Architectural Engineering

This senior project aims to investigate whether natural pozzolans are more sustainable than fly ash and a sufficient substitute for cement in the production of grout. By following the intent of the ASTM (American Society of Testing and Materials) standards, a conclusion will be made to determine if natural pozzolans can contribute comparable strength in compression. The objective is to prove that natural pozzolans should be utilized in the production of grout rather than alternatives such as fly ash because it can provide similar strength while being more economical and more sustainable.

The Design And Construction Of A Radio Telescope, Avery Elizabeth Bunting, Kira Hope Tolman

Architectural Engineering

Two architectural engineering students and an electrical engineering student worked together to design and build a radio telescope that is capable of using hydrogen line astronomy to map the galaxy. The telescope is made entirely out of aluminum, which, combined with small deflection limits, made for an iterative design process that focused primarily on constructability and supporting the desired outcomes of the electrical side.

The Center For Centering Dome, Olek Piechaczek, Ryan M. Scharf

Architectural Engineering

The Center for Centering seeks to create a large-scale healing center, conducive to individual centering of the mind and body. This mobile installation provides a relaxing, enclosed space while still maintaining a connection to the outdoors. The clients liked the idea of having a pop-up installation that could be easily set up as a touring display. With a deadline for installation looming in June 2022, a team of students had five months to design and manufacture the structure.

In winter 2022, the students developed custom geometry to minimize the number of individual parts and built a ¼ scale model of …

The Feasibility Of Using High Strength Stainless Steel In Pre-Stressing Applications, Rana Khaled Morsy

Theses and Dissertations

This paper evaluates the applicability of using a corrosion-resistant reinforcement high strength stainless steel strands (HSSS) Duplex 2205 in pre-stressing applications. HSSS-Duplex 2205 is a high performance steel which can be used as an alternative to the conventional carbon steel strands, for a better service life. The high strength and corrosion resistance of the material allows it to show its impressive performance in marine structural applications. Although the use of HSSS-Duplex 2205 could be initially costly; however, the improved durability and extended service life of the concrete structures using HSSS would require less life-cycle cost. Although there is a gap …

3d Printing Of Earthen Materials: Toward The Carbon-Zero Construction, Shiva Bhusal

Civil Engineering ETDs

In recent years, digital manufacturing techniques in the architecture and construction industry have rapidly gained attention, especially with 3D printing, also called additive manufacturing. The use of cement has been common in modern construction and is now being explored for 3D printing. However, due to cement's contribution to approximately 7 percent of global carbon emissions and its high cost, research on sustainable and greener materials has gained attention. Previous studies on alternative construction have examined the mechanical and rheological properties of soil mixes, but not much attention has been given to printability evaluation, shrinkage, and cracking, which can affect the …

Evaluation Of The Geotechnical And Foundation Components On Jud Site, Mirabel W. Nkanor

Honors Theses

This thesis is part of the senior design final project of the Civil Engineering Department at the University of Mississippi. Geotechnical and foundation analyses were done on a proposed construction project for a multi-family home in Orlando, Florida. This evaluation done in this thesis follows the pre-existing geotechnical report on the side, USDA soil reports, ASCE Code 32-01 (Design of Foundations), and ASCE-7 Section 12.31.1 (Foundations and Superstructure-to-Foundation Connections).

A structural system was selected from the proposed location, on the corner of South Conway and Judge Road, and an evaluation of the Bearing Load capacity was completed to determine the …