Engineering Commons^™

Two Clamped Pipe Support Connections For Oil And Gas Brownfield Projects, Helen M. Claycomb

University of New Orleans Theses and Dissertations

In the oil and gas industry, brownfield projects focus on the modification of or addition to an existing production facility that is fully operational and operating. Welding is typically avoided on these projects. The drilling of holes in existing primary structural elements is also prohibited. Clamped connections are often used when adding additional services in a brownfield project. There are different types of clamped connections utilized when a new structural support must be attached to an existing vertical structural pipe. The short bolt clamped connection is a well-established connection and typically used on offshore projects. The U-bolt clamped connection is …

Strengthening Of Corroded Steel Structures Using Cfrp – An Experimental Review, Ghada El-Mahdy Ph.D., P.Eng, Abdallah H. Yassin, Abdel El Rahman Khaled

Civil Engineering

Fibre reinforced polymers (FRP) have been widely used to strengthen reinforced concrete structures, however, nowadays their use to strengthen steel structures is under investigation. In particular, the need to strengthen corroded steel structures found in aggressive environments, such as marine environments, which have undergone a reduction in cross-sectional area and hence a reduction in their load-carrying capacity is in need of studying. The main problems that arise when using carbon fibre reinforced polymer (CFRP) sheets to strengthen steel structures is the weakness in the interfacial bond between the CFRP and the steel surface, the thinness of CFRP sheet, and the …

Sway And No-Sway Behaviour Of Pitched Roof Portal Frames Composed Of Cold-Formed Steel Sections, Ghada El-Mahdy Ph.D, P.Eng., Maged Tawfick Hanna Ph.D

Civil Engineering

Cold-formed sections buckle locally and distortionally in combination with overall buckling of the member. When these sections are incorporated into a portal frame structure, this combination of buckling modes affects the overall buckling behaviour of the portal frame. The objective of this paper is to study the effect of local and distortional buckling on the overall behaviour of portal frames. The portal frames studied have a span of 10 m and an eave height of 3 m with a roof pitch of 1:10. Two frames are studied the first with one intermediate interconnector at the midpoints of the column and …

Evaluation Of A Novel Remote Displacement Sensor Prototype Using Video And Laser-Based Technology For Civil Infrastructure Applications, Nicholas J. Brown

Civil and Environmental Engineering Master's Project Reports

Deflection measurements on structures, especially with regards to long-term monitoring, continues to be a challenge with current sensor technologies. Material degradation and changes in the mechanical properties due to aging (for example, creep and shrinkage in concrete bridges) directly impact the deflections exhibited by a structure. In this article we introduce and discuss the evaluation of a novel laser and video-based displacement sensor prototype to monitor displacements and rotations in structures remotely. The sensor is both inexpensive, using off-the shelf components, but also accurate and practical for situations that do not allow the use of conventional displacement sensors, which require …

Retrofit Of Corroded Corrugated Metal Culverts Using Gfrp Slip-Liner, Rahulreddy Chennareddy

Civil Engineering ETDs

Culverts are water conveyance structures, typically used to allow water flow and maintain a balance between the flow streams without interrupting structures such as highways and bridges. Corrugated metal pipes (CMPs) have been used as culverts in North America since the 1950s because of their low cost and simple construction method. Today, the corrosion of CMPs is a major problem faced by all U.S. Departments of Transportation. There is an urgent need to provide an efficient solution, one that is corrosion-resistant, to retrofit thousands of corroded CMPs across the country. High specific strength, high strength to weight ratio, corrosion resistance, …

Application Of Bayesian Networks To Integrity Management Of Energy Pipelines, Wei Xiang

Electronic Thesis and Dissertation Repository

Metal-loss corrosion and third-party damage (TPD) are the leading threats to the integrity of buried oil and natural gas pipelines. This thesis employs Bayesian networks (BNs) and non-parametric Bayesian networks (NPBNs) to deal with four issues with regard to the reliability-based management program of corrosion and TPD. The first study integrates the quantification of measurement errors of the ILI tools, corrosion growth modeling and reliability analysis in a single dynamic Bayesian network (DBN) model, and employs the parameter learning technique to learn the parameters of the DBN model from the ILI-reported and filed-measured corrosion depths. The second study develops the …

Diffusion And Uniformity Of Recycled Asphalt In Pavements, Baoshan Huang

Abbett Distinguished Seminar Series

Asphalt pavements covers over 93 percent of the paved roads in the United States. The use of recycled asphalt into pavement maintenance and construction has been a common practice. However the lack of understanding of the interaction between recycled and virgin asphalt poses a change on the efficient use of recycled asphalt, and often causes pavement premature failures. The present study addressed some fundamental aspects associated with the beneficial use of recycled asphalt into asphalt paving mixtures: 1) how much recycled asphalt can be mobilized into a uniform asphalt coating in the mixture? and 2) will the mobilized old asphalt …

Simulation Training And Route Optimization For Bridge Inspection, Sushil Louis

INSPIRE Archived Webinars

Since the 1970s, simulation training has developed opera­tional trainers for a variety of complex systems from pilot flight simulations to cultural awareness training simulations. When connected to the real world, such simulation training interfaces can drive real vehicles and systems. We have been building a Simulation Training And Control System (STACS) for autonomous bridge inspection that uses a simulated world to train inspectors to control a heterogeneous group of robots. The objective is that, once trained, inspectors can use the same STACS interface used in training to control multiple real robots simultaneously during a bridge inspection task. We first built …

Influence Of Nh4f In Dextran Based Biopolymer Electrolytes: Conductivity And Electrical Analysis, Muhamad Hafiz Hamsan, Mohd Fakhrul Zamani Kadir, Shujahadeen Bakar Aziz, Muhammad Amirul Solihin Azha, Saifful Kamaluddin Muzakir

Makara Journal of Technology

Dextran polymer host was doped with different concentrations of ammonium fluoride (NH4F) via casting technique. In this present work, dextran-NH4F film has been employed to investigate the ionic conductivity using electrochemical impedance spectroscopy from 50 to 5 MHz. The highest room temperature conductivity is achieved at (2.33 ± 0.76) × 10-3 S cm-1 with 40 wt.% NH4F. The electrolyte is found to obey Arrhenius rule at high temperature with activation energy of 0.21 eV. Dielectric analysis has been performed to obtain better understanding on the conductivity pattern. The dielectric parameters e.g. ɛreal, ɛimag, Mreal, and Mimag have been tested as …

Acute Toxicitystudy Of Choline Based Ionic Liquids Towards Danio Rerio Fish And The Aggregation Behavior Of Their Binary Mixtures, Mansoor Ul Hassan Shah, Nasruddin Nasruddin, Suzana Bt Yusup, Muhammad Moniruzzaman

Makara Journal of Technology

Marine oil spills are effectively controlled by chemical dispersants. However, the toxicity associated with it reduce its employment in marine environment. To overcome this limitation, the acute toxicity of choline based ionic liquids was evaluated as a potential low toxic variant for oil spill remediation. Further, the aggregation behavior of the individual as well as their binary mixtures was also evaluated by employing tensiometry technique. The half-lethal concentration, LC50on zebrafish (Danio rerio) of three choline based ionic liquids showed that the studied ionic liquids (ILs) fall in the range of “practically nontoxic” ( 100-1000 mg L-1).Various micellar properties showed that …

Study On Antibacterial Of Chitosan/Hydroxyapatite Doped Magnesium Composite As A Material For Bone Graft Applications, Andromeda Dwi Laksono, Teodoro A. Amatosa, Jr., Hilda Pebrianti Octaviana Sitorus, Wentika Putri Kusuma Asih, Sulistijono Sulistijono

Makara Journal of Technology

Hydroxyapatite (HAp) is one of the constituent minerals of bone and teeth, that has been widely used for synthesizing bone graft. Due to the limitation on properties of the hydroxyapatite, it is doping with Magnesium (HAp-Mg). The addition of Chitosan (Chi) was expected to improve the antibacterial properties of HAp-Mg. The present research aims to study the influence of Chitosan with 0, 5, 15, and 25 wt% addition on biocompatibility properties of Chi/HAp-Mg composite. HAp-Mg was synthesized using the sol-gel method; meanwhile, Chi/HAp-Mg composite was manufactured by mixing Chitosan in acetic acid, and HAp-Mg was added into the mixture. The …

Comprehensive Inspection On The Experimental Ferritic Stainless Steel By Means Of Transmission Electron Microscopy And Neutron Diffraction Techniques, Parikin Parikin, Mohammad Dani, Riza Iskandar, Aziz Khan Jahja, Andon Insani, Joachim Mayer

Makara Journal of Technology

The field of physical metallurgy is one of the primary beacons that guide alloy developments for multipurpose materials such as the in-core structure materials for pressure vessel components and heat exchangers. The surface microstructure of new ferritic steel with significant local constituent materials was characterized by high resolution powder neutron diffractometer (HRPD) and transmission electron microscope (TEM), combined with the energy dispersive X-ray spectroscopy (EDX). The alloy contains73% Fe, 24% Cr, 2% Si, 0.8% Mn, and 0.1% Ni, in %wt. The charge materials were melted by the casting techniques. The neutron diffractograms obtained shows five dominant diffraction peaks at (110), …

Evaluation Of Primal-Dual Splitting Algorithm For Mri Reconstruction Using Spatio-Temporal Structure Tensor And L1-2 Norm, Mia Rizkinia, Masahiro Okuda

Makara Journal of Technology

Magnetic resonance imaging (MRI) is an essential medical imaging technique which is widely used for medical research and diagnosis. Dynamic MRI provides the observed object visualization through time and results in a spatiotemporal signal. The image sequences often contain redundant information in both spatial and temporal domains. To utilize this characteristic, we propose a spatio-temporal reconstruction approach based on compressive sensing theory. We apply spatio-temporal structure tensor using nuclear norm, in addition to the wavelet sparsity regularization. The spatio-temporal structure tensor is a matrix that consists of gradient components of the MRI data w.r.t the spatial and temporal domains. For …

A New Synthesized Microalloys Steel Ods Of High Amplitude Ultrasonically Irradiation, Marzuki Silalahi, Hanif Abdurrahman Wicaksana, Ferhat Aziz, Syahfandi Ahda, Mohamad Riza Iskandar

Makara Journal of Technology

Micropowders of oxide-dispersion-strengthened (ODS) steel have been synthesized using the ultrasonic irradiation method with variations in amplitude. The ultrasonic irradiation process is performed for 50 h at a frequency of 20 kHz with 40%, 50%, and 60% amplitudes in toluene solution. The formation of Fe-Cr microalloys in the preparation of Fe- 15Cr-0.5Y2O3 powder was analyzed using SEM-EDS, X-ray diffraction (XRD), and TEM-EDS. The percentage of Fe- Cr phase mass fraction of ODS steel micropowder formed during ultrasonic irradiation with 40%:50%:60% amplitude was 12.2%:34.1%:22.1%, with 25.67:77.02:38.51 nm crystallite size. The crystallite size at 50% amplitude was the largest, and the diffusion …

Neutron Diffraction Study Of Multiferroic 0.6nife2o4/0.4batio3 Composite, Engkir Sukirman, Yosef Sarwanto, Syahfandi Ahda, Andon Insani

Makara Journal of Technology

Neutron diffraction study on the 0.6NiFe2O4/0.4BaTiO3 multiferroic composite has been carried out. The 0.6NiFe2O4/0.4BaTiO3 multiferroic composites have been synthesized by solid reaction method. In this study, 20 g of BaTiO3 (BTO) and 20 g of NiFe2O4 (NFO) compounds were prepared from the powder raw materials of BaO3 and TiO2 for BTO, and NiO and Fe2O3 for NFO. Furthermore, both BTO and NFO were each crushed for 5 hours using High Energy Milling (HEM). Then the BTO and NFO were calcined in the furnace at 950 °C/5 hours and 900 °C/5 hours, respectively. Both NFO and BTO precursors were manually mixed …

Evaluation Of Fracture Principles In Asphalt Concrete Utilizing The Sc(B) Geometry, Airam Marlee Morales Vega

Graduate Theses and Dissertations

Since cracking is one of the principal distresses to be considered in asphalt concrete, multiple fracture tests and geometries have been used to quantify cracking resistance. One of the most popular geometries that have been used in fracture tests is the Semi-Circular bend (SC(B)). However, for this geometry, most of the fracture test methods use different parameters such as thickness, testing temperatures, and loading rates. Thus, the purpose of this research was first to evaluate fracture energy by performing a ruggedness test based on ASTM E1169. Then, to apply fracture mechanics concepts to evaluate three specimen thicknesses (25, 50, and …

Incorporating Geophysical Data In Slope Stability Modeling For Two Slopes In Arkansas, Vanessa Lebow

Graduate Theses and Dissertations

Slope failures in the United States alone cause millions of dollars in damage to infrastructure, threaten national monuments, create environmental hazards, and take an average of 25-50 lives a year. With the inevitable construction that occurs on slopes, it is imperative that the slopes be properly designed which requires a thorough understanding of slope grade, subsurface soil conditions, soil strength parameters, water table locations, and depth to bedrock across the entire site. The preferred method of data collection would be to use borings and other in-situ methods; however, sometimes due to cost constraints or site accessibility only a very limited …

Evaluation Of Concrete Deck Curing Regimens Using Capillary Pressure Sensing System, Samuel Spann

Graduate Theses and Dissertations

Early-age plastic shrinkage cracking is a common problem with the construction of concrete bridge decks due to the high surface area-to-volume ratio and exposure to potentially detrimental environmental effects. Curing regimens are utilized to mitigate cracking risk during the plastic stage of the concrete; the curing regimens evaluated for this study were wet burlap-polyethylene sheeting, two acrylic curing compounds, and one lithium compound. Capillary pressure in the water filled pores has been shown to correlate to the plastic shrinkage cracking risk of concrete. A new portable system has been developed to measure the capillary pressure that could potentially be used …

Truck Activity Pattern Classification Using Anonymous Mobile Sensor Data, Taslima Akter

Graduate Theses and Dissertations

To construct, operate, and maintain a transportation system that supports the efficient movement of freight, transportation agencies must understand economic drivers of freight flow. This is a challenge since freight movement data available to transportation agencies is typically void of commodity and industry information, factors that tie freight movements to underlying economic conditions. With recent advances in the resolution and availability of big data from Global Positioning Systems (GPS), it may be possible to fill this critical freight data gap. However, there is a need for methodological approaches to enable usage of this data for freight planning and operations.

To …

Study Of Internal Strains Developed In Concrete Decks At Early Ages In Steel Continuous Bridges, Fernando R. Benitez Ortiz

Graduate Theses and Dissertations

The Arkansas Department of Transportation (ARDOT) has identified bridge deck cracking shortly after concrete decks are placed and prior to applying traffic loads. Previous researchers have confirmed improper construction practices and design methods can lead to deck cracking. Currently, many contractors throughout Arkansas are using continuous deck pours. This construction approach may restrict the concrete slab from movement during early age shrinkage, causing tensile stresses to develop. The final stresses at the end of construction must be lower than the concrete tensile strength, if not cracking issues will develop. Eventually, these cracks may enlarge due to service load stresses and …

Behavior Of Hollow-Core Composite Bridge Columns Having Slender Inner Steel Tubes, Mohanad M. Abdulazeez, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper experimentally investigates the seismic behavior of three large-scale hollow-core fiber-reinforced polymer-concrete-steel (HC-FCS) columns. An HC-FCS column consisted of a concrete shell sandwiched between an outer glass fiber-reinforced polymer (GFRP) tube and an inner steel tube. Both tubes provided continuous confinement for the concrete shell along with the height of the column. The columns had two different steel tube diameter-to-thickness (Ds/ts) ratios of 85, and 254. Each steel tube was embedded into the footing, with an embedded length of 1.25-1.6 times its diameter, while the GFRP tube was not embedded into the footing. Two columns were tested as as-built …

Review On Rheological Characterization Of Bio-Oils/Bio- Binders And Their Applicability In The Flexible Pavement Industry, Ahmed Hemida, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper mainly presents a qualitative review on to what extent the bio-oil has the potential to replace asphalt binder for a sustainable, flexible pavement industry. The current research comprises reviews on the rheological characterization of pure bio-oils and bio-oil modified binders (bio-binders) investigated in the literature. The literature showed that several sources of bio-oils have the potential to contribute to the flexible pavement industry. This research mainly discusses the high-temperature properties, especially viscosity for the construction process (mixing and compaction) and viscoelasticity for the elevated temperature of in-service roads. This review paper encourages orientation towards these kinds of renewable …

Multifunctional Lightweight Aggregate Containing Phase Change Material And Water For Damage Mitigation Of Concrete, Wenyu Liao, Aditya Kumar, Kamal Khayat, Hongyan Ma

Materials Science and Engineering Faculty Research & Creative Works

This paper presents an innovative concept of multifunctional lightweight aggregate, which is produced by loading phase change material (PCM) into the interior of lightweight sand (LWS) and sealing the surface pores using water. The PCM loaded in the LWS functionalizes it as a temperature management agent in concrete, and the water in surface pores enables internal curing. It has been found that the particle shape and pore structure of crushed expanded shale LWS makes it an ideal carrier for PCM, loading sufficient PCM and maintaining better (compared to natural sand) mechanical interlocking. When coupled with the internal curing effect, the …

Development Of Finite Element Techniques To Simulate Concrete-Filled Fiber-Reinforced Polymer Tube Structures, Hakeem S. Majeed

Electronic Theses and Dissertations

This dissertation presents the development of finite-element (FE) techniques to simulate the behavior of concrete-filled fiber reinforced polymer (FRP) tubes (CFFTs) in support of more effective structural design and analysis methods for buried composite arch bridges (BCABs) that use CFFT arches as main structural members. The research includes three specific topics to make contributions in different aspects of the investigation of these complex structures.

The first topic is the nonlinear three-dimensional FE modeling of steel-free CFFT splices. For model validation, comparisons were made between the model predictions and control beam and spliced beams with and without internal collars tested by …

Investigating The Addition Of Suicide Prevention Barriers To The Natchez Trace Parkway Bridge, Jaideep Thota, Nancy Abdo, Payne Susong, Connor Campbell, Joseph Allston, Meet Patel

Chancellor’s Honors Program Projects

No abstract provided.

Safety Assessment Of Road Vehicle In Crosswind Considering Driver Behavior, Jiexuan Hu

LSU Doctoral Dissertations

With expansion of the economy, more and more highway networks extend to coastal areas and mountain valley areas. Vehicles will be exposed to strong crosswinds when driven on these highway roads, especially in hurricane season and in winter in these two different topographic areas. Strong crosswinds threaten the safety of transportation infrastructure and passing vehicles in forms of vehicle accidents that usually result in traffic blockage and driver injury, posing negative effects on economic growth. This dissertation aimed to evaluate the vehicle safety when running through crosswinds in consideration of driver behaviors.

Firstly, the aerodynamic characteristics of road vehicles were …

The Application Of Gray-Scale Level-Set Method In Segmentation Of Concrete Deck Delamination Using Infrared Images, Chongsheng Cheng, Zhigang Shen

Department of Construction Engineering and Management: Faculty Publications

Conventional nondestructive delamination detection of concrete pavements through thermography is often based on temperature contrasts between delaminated and sound areas. Non-uniform backgrounds caused by the environmental conditions are often challenging for contrast-based methods to robustly differentiate the delaminated areas from the sound areas. Instead of focusing on the temperature contrast, this study proposes a temperature gradient-based level set method (LSM) to detect boundaries for delamination segmentations. A modified edge indicator function is developed to represent the normalized temperature gradient of a thermal image. The experimental study was conducted to evaluate its applicability and stability for boundary detection in terms of …

Conditional Survival Analysis For Concrete Bridge Decks, Azam Nabizadeh, Habib Tabatabai, Mohammad A. Tabatabai

Civil and Environmental Engineering Faculty Articles

Bridge decks are a significant factor in the deterioration of bridges, and substantially affect long-term bridge maintenance decisions. In this study, conditional survival (reliability) analysis techniques are applied to bridge decks to evaluate the age at the end of service life using the National Bridge Inventory records. As bridge decks age, the probability of survival and the expected service life would change. The additional knowledge gained from the fact that a bridge deck has already survived a specific number of years alters (increases) the original probability of survival at subsequent years based on the conditional probability theory. The conditional expected …

Pore Characteristics And Computed Permeability Of Pastes Subject To Freeze-Thaw Cycles At Very Early Ages By X-Ray Ct, Ya Wei, Zehong Wu, Xiang Gao

International Conference on Durability of Concrete Structures

Freeze-thaw cycling can damage microstructure of concrete and reduce the service life of concrete structures. This is especially detrimental for concrete subject to freeze-thaw cycles at very early-ages, such as within the first few days after constructions. Typical low and high water-to-cement (w/c) ratio pastes are investigated experimentally and numerically in this study. The pastes are subject to freeze-thaw cycles at the age of 1, and 7 days and then sealed-cured to the age of 45 days. The pore size distribution is measured and quantified by X-ray computer tomography (CT) with high resolution. The permeability of the corresponding pastes is …

Development Of Engineered Cementitious Composites With Conductive Inclusions For Use In Self-Sensing Applications, Benny Suryanto Dr, Danah Saraireh Ms, Steven Walls Mr, Jaehwan Kim Dr, W John Mccarter Prof

International Conference on Durability of Concrete Structures

The mechanical and a.c. electrical properties of a new varietal of engineered cementitious composite (ECC) incorporating conductive inclusions are presented. Electrical measurements were undertaken over a wide frequency range while curing and when under uniaxial tensile loading to study the influence of ongoing hydration and multiple microcrack formation on the composite electrical impedance. When presented in Nyquist format, the work shows that conductive inclusions reduce the bulk resistance of the composite while enhancing its polarizability, transforming the classic, single-arc bulk response of typical cement-based materials to a two-arc response. The bulk resistance was shown to increase with time and damage, …