Food Science Commons^™

Risk-Based Evaluation Of Treatments For Water Used At A Pre-Harvest Stage To Mitigate Microbial Contamination Of Fresh Raspberry In Chile, Constanza Avello Lefno

Department of Food Science and Technology: Dissertations, Theses, and Student Research

The global agricultural sectors are facing challenges of providing food for a rapidly growing population while still meeting appropriate food quality and safety standards. Chile, a South American country with great climatic and soil diversity, is positioned among the top ten agricultural exporters in the world.

Berries are considered highly prioritized produce in terms of microbiological hazards. The work presented in this thesis primarily focuses on the control of microbial contamination in water used at a pre-harvest stage, for enhanced quality and safety of raspberry products in Chile destined for export.

Two studies were conducted to achieve the goals. In …

A Systematic Literature Review Of Sanitizer Efficacy To Remove Listeria Monocytogenes, Salmonella Spp., And Shiga Toxin-Producing Escherichia Coli Biofilms From Food Processing Surfaces, Ashlynn Robinson

Food Science Undergraduate Honors Theses

Sanitizing in food production environments is essential to prevent, reduce, and/or eliminate foodborne pathogens. Biofilms consist of one or more different types of microorganisms and can grow on numerous types of surfaces (Costerton,1999). SLRs provide transparency about what steps were taken to acquire the sources included in the analysis (Liberati et al.,2009; Moher et al., 2009). The references obtained from the databases were based on specific eligibility criteria to ensure reproducible results. The inclusion criteria included six surface types (stainless steel, glass, plastic, polyurethane, PVC, rubber), seven sanitizer types (anionic acid, benzalkonium chloride, iodine, iodophor, peracetic acid, quaternary ammonium, and …

Novel Sources Of Food Allergens, Lee Palmer

Department of Food Science and Technology: Dissertations, Theses, and Student Research

Technological advancement and globalization have led to the spread of foods to countries where the food does not yet have a documented history of consumption, in other words, novel foods. Novel foods also encompass truly novel foods, foods that have been processed in a novel manner, and novel means of exposure. With novel foods comes the potential of food allergens that pose an uncharacterized risk to those with food allergies. Food allergies are an increasingly important facet of public health. Therefore, a deeper understanding of novel foods as well as methods to evaluate consumers’ potential risk is necessary. Literature reviews …

Impact Of Different Plant-Based Foods Consumption On The Composition And Diversity Of Gut Microbiota, Ayoub Al Othaim

Graduate Theses and Dissertations

Plant-based diets are primarily derived from plant sources, including fruits and vegetables. Such patterns are associated with health benefits by promoting general health and preventing many diseases and metabolic disorders. Fruits and vegetables are key sources of high-quality nutrients such as dietary fibers and polyphenols. Since they are rich in dietary fibers and polyphenols, whole fruits and vegetables represent unique and somewhat understudied modulators of the gut microbiota and its associated functions. This study aims to (i) investigate the impact of varying dilutions of cherry juices concentrate on the composition of the murine gut microbiota, (ii) investigate the impact of …

3d Printing Of High Viscosity Fluids And Its Application In 3d Printing Of Prosthetic Teeth., Abhilash Aditya

Open Access Theses & Dissertations

The advancement in technology has brought forward non-conventional manufacturing methods that are efficient and advantageous for specific applications. 3D printing is one such outcome, whose applications stretch from biomedical applications to daily products. 3D printing is a rapidly growing technology, and innovative research developments have proven versatility in creating physical objects. Simplification and constant improvement in Fused Deposition Modeling (FDM) operation result from decades of research. However, 3D printing is material-specific and contributes to shortcomings in the technology. The build-material dictates the extrusion parameters, including the material discharge rate and head speed for a continuous flow. Customization being the prime …

Gut Community Response To Wheat Bran And Pinto Bean, Shuen Leow

Department of Food Science and Technology: Dissertations, Theses, and Student Research

There is general consensus among the scientific community that dietary fibers reduce the risk of Western diseases through their fermentation by beneficial microbial communities in the human gut. However, dietary fibers in wheat bran (WB) and pinto bean (PB) are incompletely fermented by the gut microbiota. Therefore, there is a critical need to identify gut microbial communities that can increase fermentation of dietary fibers from these foods to maximize their disease-preventing properties. The goal of this study was to identify such communities with increased capacity to ferment the dietary fibers in WB and PB. To accomplish these goals, a stepwise …

Combatting Inefficient Food Waste In Nwa With Food Loops, Davis Ehlers

Economics Undergraduate Honors Theses

It is no longer a speculation that the actions of the human race have had detrimental impacts on the environment. As consumers become increasingly aware of this fact- and the fact that many of the issues are caused by bad business and environmental management, many individuals are wondering what they can do about it. This growing area of demand is where many businesses have begun to take on the challenge of being profitable while benefiting the environment at the same time, and some have even found ways to create a profit by engaging in activities that directly benefit the environment. …

Optimization Of Broken Rice Consumption Through Understanding The Confluence Of Sensory And Economic Preferences, Matthew Greer Richardson

Graduate Theses and Dissertations

The authors were perplexed by the seeming dichotomy between the majority 70% of Haitian consumers being chronically food insecure, but still preferring to pay premium international market prices for long-grain rice that constitutes 30% of the calories in this poorest nation in the Western Hemisphere. The aim of this study was to determine the optimal percent broken rice in regards to price specifically to Haiti. Optimization between quality and price point is seen as the best rice for the price, and can be found through combining individual preferences with willingness to pay. Broken rice (brokens) garner a significantly discounted price …

Evaluation Of Irrigation And Nutrient Management Strategies In Rice Using Alternative Irrigation Methods, Justin Lee Chlapecka

Graduate Theses and Dissertations

As water resources gain value across the Mid-South, alternative irrigation strategies of rice (Oryza sativa L.) have garnered increasing attention. In 2015, an estimated 1.7% of Arkansas rice hectarage used alternate wetting and drying (AWD) irrigation and 0.9% used furrow irrigation. As of 2020, 2.5% used AWD and 16.9% used furrow irrigation, the latter accounting for near 99,000 ha in Arkansas. Little information exists in the scientific literature in relation to management of rice grown in the Mid-South without a conventional flood. This fact coupled with the rapid adoption rate, especially for furrow-irrigated rice (FIR), during the last five years …

Multi-Response Surface Optimisation Of Extrusion Cooking To Increase Soluble Dietary Fibre And Polyphenols In Lupin Seed Coat, Liezhou Zhong, Zhongxiang Fang, Mark L. Wahlqvist, Jonathan M. Hodgson, Stuart K. Johnson

Research outputs 2014 to 2021

The seed coat of the legume lupin which is rich in insoluble dietary fibre is a major by-product in human food applications. Extrusion cooking has been demonstrated to increase desirable soluble dietary fibre in the Australian sweet lupin seed coat. In this study, processing condition of twin-screw extrusion cooking was optimised using a central composite rotatable design to increase soluble dietary fibre in lupin seed coat from 44.17 g/kg up to 113.69 g/kg dry basis. The high levels of polyphenols in the seed coat were retained. The optimal extrusion conditions which achieved maximum levels of soluble dietary fibre, total free …

Declining Knowledge On Paper Food Storage And Preparation Household Food Waste And Sustainability, Luke Ramirez-Bryan, Amir Golmohamadi

Nutrition Student Work

In 2020 in the U.S alone over 40 million tons of food was wasted. Part of this this waste is attributed to discarded fruits and vegetables and equals to 7% of croplands’ yearly production. Reducing food waste can be an important factor in improving environmental and social sustainability. Lack, or inadequate, knowledge of food preparation, storage, and cooking has contributed to this loss. One method of reducing food wastes is decreasing the amount of waste in households by using nutrition education intervention such as training local communities to improve their cooking skills and general food storage and preparation knowledge. Consumers …

Low Sugar Oat Products Are More Sustainable, Why Are They Not On The Shelves Of Supermarkets?, Nicole Heth

Nutrition Student Work

Excess sugar in individuals’ diets may lead to weight related health problems such as obesity and diabetes. Sugar in processed foods is used to add sweetness and intensify flavor this is common in products such as oatmeal and granola bars. Reducing the amount of sugar in food products can contribute to all three pillars of sustainability environmental, economic and social. The goal of this report is to show the steps of developing a reduced sugar oatmeal food product up to the point that it is ready for conducting a sensory evaluation. This report and possible presentation at the WCU’s research …

The Return To A More Basic And Traditional Approach To Foodways And The Three Pillars Of Sustainability, Tommy Benedetti

Nutrition Student Work

The declining health of the planet, of humans and even of local economies can all be traced directly back to where our food comes from and how it is prepared. Returning to more basic and traditional food practices would benefit the issues stated previously in a multitude of ways. Putting an emphasis on local, fresh and in turn mainly healthier foods will allow individuals to form a deeper connection with where their food comes from. Through developing this deeper association with and understanding of the origins of their food, people will be able to revisit a more meaningful relationship with …

Water Footprint And The Impact On Food Production And Environmental Sustainability, Syreeta Morgan, Amir Golmohamadi

Nutrition Student Work

Freshwater is in short supply but the demand for it is constantly growing. Water footprint is used to indicate the amount of fresh water that any given process or activity uses. Growing and processing animal products have a much higher water footprint than crops such as fruits and vegetables. More information and research must be carried out regarding water footprints to improve overall sustainability and use of fresh water. Continuous research on developing policies, and more sustainable habits, must be developed to conserve the current freshwater resources. The objective of this research is preparing a report that can be used …

Analysis Of Fatty Acid Profile In Metabolites And Cells Of Five Bifidobacterium Strains By Gc-Ms, Chen Shi-Yang, Liu Feng-Ying, Chen Hui-Min, Chen Li-Jun, Chen Shu-Xing

Food and Machinery

Gas chromatography-mass spectrometry (GC-MS) was used to analyze fatty acid profile in metabolites and cells of five strains of Bifidobacterium. The results showed that the fatty acid content of different Bifidobacterium was significantly different among the metabolites, and there were some differences among the cells. Differences of fatty acid were also found among the same Bifidobacteriium strains derived from different sources. Methyl palmitate (C_16:0), methyl lignocerate (C_24:0), and methyl stearate (C_18:0) were the main fatty acids in metabolites and cells of the five strains. Among them, the C_16:0 was significantly different (P＜0.05), and …

Rheological Properties Of Fenugreek Gum On Improving The Safety Of Drinking Water In Nursing Dysphagia, Hao Lu-Lu, Wang Ling, Shang Long-Chen, Li Bin

Food and Machinery

In this paper, according to the American Dysphagia Diet standard, based on the viscosity at 50 s^-1, fenugreek gum was prepared into thickening fluids with viscosity of 180 cP(nectar),1 000 cP(honey) and 2 500 cP(pudding), that the rheological properties had been systematically studied to evaluate the potential of fenugreek gum in improving the safe drinking water of patients with dysphagia. And then the rheological properties of fenugreek gum prepared at different temperatures were further explored. The results showed that the dissolution temperature was the key to whether the rheological properties of fenugreek gum meet the requirements of drinking …

Determination Of Total Fluorine In Tea By Nuclear Magnetic Resonance Spectroscopy Combined With Oxygen Bomb Combustion, Zhou Mi, Han Zhi, Zhu Zheng-Wei, Zhu Song-Song, Wang Hui-Xia, Jiang Feng, Zhu Qian

Food and Machinery

Quantitative analysis of total fluorine in tea was established by using ¹⁹F quantitative nuclear magnetic resonance combined with the pretreatment method of oxygen bomb combustion. The ¹⁹F qNMR method used the signal characteristic of fluoride ion at δ=-119 as the qualitative peak and the signal characteristic of trifluoroacetic acid at δ=-75 as the internal standard peak. The fluorine-containing substances in tea sample was burned by oxygen bomb and converted into inorganic fluorine. Mixed metal chelating agent which included sodium citrate and disodium EDTA was added to eliminate interference and then the absolute content of fluoride ion in tea …

International Experiences And Inspirations Of Dairy Product Safety And Quality Supervision, Zhang Li-Ping

Food and Machinery

At present, the quality and safety supervision of dairy products in China are facing many challenges. Some successful experiences and advanced technologies in dairy product quality and safety supervision, safety risk assessment, quality standards and safety standards, management mode, and the examination system of in developed countries, such as Europe and the United States, were reviewed. It was concluded that, to improve the Chinese dairy products quality and safety supervision system, the integrated use of economic, administrative and legal means should be used to strengthen the macro-control. Moreover, strategies including constructing a safety-oriented inspection and testing system, speeding up technical …

Conjugate Tooth Profile Solution And Meshing Analysis Of Harmonic Drive Based On Envelope Theory, Li Peng-Chao, He Xue-Ming, Lu Li-Xin, Lin Zi-Dong

Food and Machinery

In order to solve the problem of complex derivation of conjugate tooth profile in harmonic drive, a method based on the trajectory envelope of flexspline is used to solve the conjugate tooth profile, and the different tooth height along the axial direction of the flexspline profile is adjusted to avoid interference between the flexible gear and the conjugate steel gear. In order to analyze the influence of tooth root circle radius and torque on the stress of flexspline, a multi-body contact model was established by ANSYS Workbench to explore the influence of root circle radius and torque on the stress …

Anomaly Vibration Detection Method Of The Refrigeration Compressor Based On Autoencoder, Wang Yuan-Tao, Feng Tao, Sun Qia, Wang Jing, Wang Yi-Han

Food and Machinery

The compressor is the core component of refrigeration equipment. This paper proposeed a method of anomaly vibration detection of refrigeration compressor based on autoencoder technology in order to solve the quality control problems in the production process of refrigeration compressor. The principle and process of anomaly vibration detection were given, based on autoencoder and the acquisition method of compressor vibration signal sample. The relationship was studied between the mean square error of the input and output of the autoencoder and the distribution of the signal samples. By means of the autoencoder model, the decision fundament of the abnormal vibration of …