Optics Commons^™

Plasma Temperature Measurements In The Context Of Spectral Interference, Brandon Seesahai

Honors Undergraduate Theses

The path explored in this thesis is testing a plasma temperature measurement approach that accounts for interference in a spectrum. The Atomic Emission Spectroscopy (AES) technique used is called Laser Induced Breakdown Spectroscopy (LIBS) and involves focusing a laser pulse to a high irradiance onto a sample to induced a plasma. Spectrally analyzing the plasma light provides a "finger print" or spectrum of the sample. Unfortunately, spectral line broadening is a type of interference encountered in a LIBS spectrum because it blends possible ionic or atomic transitions that occur in plasma. To make use of the information or transitions not …

Two-Photon Excitation Based Photochemistry And Neural Imaging, Kevin Andrew Hatch

Open Access Theses & Dissertations

Two-photon microscopy is a fluorescence imaging technique which provides distinct advantages in three-dimensional cellular and molecular imaging. The benefits of this technology may extend beyond imaging capabilities through exploitation of the quantum processes responsible for fluorescent events. This study utilized a two-photon microscope to investigate a synthetic photoreactive collagen peptidomimetic, which may serve as a potential material for tissue engineering using the techniques of two-photon photolysis and two-photon polymerization. The combination of these techniques could potentially be used to produce a scaffold for the vascularization of engineered three-dimensional tissues in vitro to address the current limitations of tissue engineering. Additionally, …

Determination Of The Polymerisation Rate Of A Low-Toxicity Diacetone Acrylamide-Based Holographic Photopolymer Using Raman Spectroscopy, Dervil Cody, Emilia Mihaylova, Luke O'Neill, Izabela Naydenova

Articles

The polymerisation rate of a low-toxicity Diacetone Acrylamide (DA)-based photopolymer has been measured for the first time using Raman spectroscopy. A value for the polymerisation rate of 0.020 s⁻¹ has been obtained for the DA photopolymer by modelling the polymerisation reaction dynamics as a stretched exponential or Kohlrausch decay function. This is significantly lower than the polymerisation rate of 0.100 s⁻¹ measured for the well known Acrylamide (AA)-based photopolymer composition. The effect of the additive glycerol on the polymerisation rate of the DA-based photopolymer has also been investigated. The inclusion of glycerol is observed to increase the rate …

A Lego® Brewster Angle Microscope For Quantitative Monolayer Film Analysis, Nicholas Benz

Physics

In order to study single-molecule thick films and their phase behavior we built a Brewster Angle Microscope (BAM). BAM’s are inherently expensive due to their accuracy and precision. We built a fully functional BAM using Lego® Mindstorm® kits for the fraction of the price of a commercial BAM. And by utilizing the 10µm patented Lego® tolerance, comparable accuracy was attained. The BAM was mounted to a Langmuir-trough and will be used for laboratory experiments for optics and physical chemistry along with research on lung surfactant and on liquid crystals.

Multi-Mode And Single Mode Polymer Waveguides And Structures For Short-Haul Optical Interconnects, Kevin L. Kruse

Dissertations, Master's Theses and Master's Reports - Open

Single mode and multi-mode polymer optical waveguides are a viable solution for replacing copper interconnects as high speed and large bandwidth short-haul optical interconnects in next-generation supercomputers and data servers. A precision laser direct writing method is implemented for producing various single mode and multi-mode polymer waveguide structures and their performance is evaluated experimentally showing agreement with theoretically developed models. The laser direct writing method is the optimal solution for low-rate cost-effective prototyping and large area panel production.

A single mode polymer waveguide bridge module for silicon to glass optical fibers is designed, modeled, fabricated, and measured. The bridge module …

Optical Injection Unlocking For Cavity Ringdown Spectroscopy, Gregory A. Bostrom, Andrew L. Rice, Dean B. Atkinson

Physics Faculty Publications and Presentations

Continuous wave cavity ringdown spectroscopy requires a rapid termination of the injection of light into the cavity to initiate the decay (i.e., ringdown) event. We demonstrate a technique that accomplishes this through pulsed optical injection of a second laser into the main laser, resulting in 20-100 MHz frequency shifts in the otherwise cavity-locked main laser sufficient to create ringdown events at 3.5 kHz. Data on the frequency shift as a function of both main laser current and relative wavelength are presented, 88 well 88 a demonstration that single exponential decays are maintained in the process.

Improving Hybrid Solar Cells: Overcoming Charge Extraction Issues In Bulk Mixtures Of Polythiophenes And Zinc Oxide Nanostructures, Grant T. Olson

Master's Theses

Organic photovoltaics (OPVs) have received a great deal of focus in recent years as a possible alternative to expensive silicon based solar technology. Current challenges for organic photovoltaics are centered around improving their lifetimes and increasing their power conversion efficiencies. One approach to improving the lifetime of such devices has been the inclusion of inorganic metal oxide layers, but interaction between the metal oxides and common conjugated polymers is not favorable. Here we present two methods by which the interactions between polythiophenes and nanostructured ZnO can be made to be more favorable. Using the first method, direct side on attachment …

Enhancing The Insulation Of Wide-Range Spectrum In The Pva/N Thin Film By Doping Zno Nanowires, Yu-Chen Lin, Ching-Hsiang Vhen, Liang-Yih Chen, Shih-Chieh Hsu, Shizhi Qian

Mechanical & Aerospace Engineering Faculty Publications

In this study, polyvinyl alcohol/nitrogen (PVA/N) hybrid thin films doped with sharp-sword ZnO nanowires with insulating effect and wide-range spectrum are demonstrated for the first time. PVA/N doped ZnO nanocomposites were developed by blending PVA and N-doped ZnO nanowires in water at room temperature. Measurements from the field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), Raman, and photoluminescence emission (PL) spectra of the products show that nitrogen is successfully doped into the ZnO wurtzite crystal lattice. In addition, the refractive index of PVA/N doped ZnO hybrid thin films can be controlled by varying the doped ZnO nanowires under different …

Uv-Visible Microscope Spectrophotometric Polarization And Dichroism With Increased Discrimination Power In Forensic Analysis, Dale Kevin Purcell

All Open Access Legacy Dissertations and Capstone Projects

Microanalysis of transfer (Trace) evidence is the application of a microscope and microscopical techniques for the collection, observation, documentation, examination, identification, and discrimination of micrometer sized particles or domains. Microscope spectrophotometry is the union of microscopy and spectroscopy for microanalysis. Analytical microspectroscopy is the science of studying the emission, reflection, transmission, and absorption of electromagnetic radiation to determine the structure or chemical composition of microscopic-size materials. Microscope spectrophotometry instrument designs have evolved from monochromatic illumination which transmitted through the microscope and sample and then is detected by a photometer detector (photomultiplier tube) to systems in which broad-band (white light) illumination …

Laser Processing Of Metals And Polymers, Senthilraja Singaravelu

Physics Theses & Dissertations

A laser offers a unique set of opportunities for precise delivery of high quality coherent energy. This energy can be tailored to alter the properties of material allowing a very flexible adjustment of the interaction that can lead to melting, vaporization, or just surface modification. Nowadays laser systems can be found in nearly all branches of research and industry for numerous applications. Sufficient evidence exists in the literature to suggest that further advancements in the field of laser material processing will rely significantly on the development of new process schemes. As a result they can be applied in various applications …

Remote Sensing Phase Fluorimetry Using Mercury Vapor Lamp, Matthew J. Bohn, Michael A. Lundin

AFIT Patents

An efficient and portable method for remote detection of a target mineral material through frequency domain fluorimetry, a detection technique that measures the time lag between absorption and emission of photons, thereby determining the lifetime of said target mineral material. As claimed and disclosed in the present invention, mercury vapor lamps, a common source of industrial facility lighting, emit radiation that overlaps the UV/blue absorption spectrum of many fluorophores and may be used as an efficient and portable excitation source for remote frequency domain fluorimetry.

Localized Surface Plasmon Resonance Of Single Silver Nanoparticles Studied By Dark-Field Optical Microscopy And Spectroscopy, Wei Cao, Tao Huang, Xiao-Hong Nancy Xu, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Localized surface plasmon resonance (LSPR) of Ag nanoparticles (NPs) with different shapes and disk-shaped Ag NP pairs with varying interparticle distance is studied using dark-field optical microscopy and spectroscopy (DFOMS). Disk-, square-, and triangular-shaped Ag NPs were fabricated on indium tin oxide-coated glass substrates by electron beam lithography. The LSPR spectra collected from single Ag NPs within 5×5 arrays using DFOMS exhibited pronounced redshifts as the NP shape changed from disk to square and to triangular. The shape-dependent experimental LSPR spectra are in good agreement with simulations using the discrete dipole approximation model, although there are small deviations in the …

Nonuniformity In Lattice Contraction Of Bismuth Nanoclusters Heated Near Its Melting Point, A. Esmail, M. Abdel-Fattah, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The structural properties of bismuth nanoclusters were investigated with transmission high-energy electron diffraction from room temperature up to 525 ± 6 K. The Bi nanoclusters were fabricated by thermal evaporation at room temperature on transmission electron microscope grids coated with an ultrathin carbon film, followed by thermal and femtosecond laser annealing. The annealed sample had an average cluster size of ∼14 nm along the minor axis and ∼16 nm along the major axis. The Debye temperature of the annealed nanoclusters was found to be 53 ± 6 K along the [012] direction and 86 ± 9 K along the [110] …

Electronic Structure Of Lithium Tetraborate, David J. Wooten

Theses and Dissertations

Due to interest as neutron detection material, an investigation of Li₂B₄O₇(110) and Li₂B₄O₇(100) was undertaken, utilizing photoemission and inverse photoemission spectroscopic techniques. The measured band gap depended on crystallographic direction with the band gaps ranging from 8.9±0.5 eV to 10.1±0.5 eV. The measurement yielded a density of states that qualitatively agreed with the theoretical results from model bulk band structure calculations for Li₂B₄O₇; albeit with a larger band gap than predicted, but consistent with the known deficiencies of LDA and DFT calculations. …

Investigation Of Electrical And Optical Properties Of Bulk Iii-V Ternary Semiconductors, Travis C. Gomez

Theses and Dissertations

Bulk grown III-V ternary semiconductors of In_0.08Ga_0.92Sb and In_0.15Ga_0.85As were investigated through Hall-effect and photoluminescence measurements to determine carrier concentration, mobility, sheet resistivity, and luminescence spectrum. In the past, epitaxial layers of ternary compounds have been grown on binary compound substrates, and thus very limited lattice matched ternary alloys were available. Recently, bulk grown ternary substrates have been developed, and it has presented a renewed interest in using these substrates to grow high quality ternary compounds for use in many next generation optoelectronic devices. The results of photoluminescence (PL) study for the …

Nanocomposite Thin Films Of Au Nanoparticles Embedded In Yttria-Stabilized Zirconia For Plasmonic-Based Harsh Environment Gas Detection, Phillip Henry Rogers

Legacy Theses & Dissertations (2009 - 2024)

Increased health concerns due to the emission of gases linked to the production of tropospheric ozone by petroleum based fuel burning engines has resulted in the codification of more stringent emissions regulations domestically. Emissions regulations on commercial jetliners are one of the areas to be met with stricter standards. Currently there is not a sensing technology that can detect the emissions gases in the exhaust stream of a jet turbine engine with lower detection limits that meet these standards.

Real-Time Plasma Controlled Chemistry In A Two-Frequency, Confined Plasma Etcher, Vladimir Milosavljevic, Albert R. Ellingboe, Cezar Gaman, John V. Ringwood

Articles

The physics issues of developing model-based control of plasma etching are presented. A novel methodology for incorporating real-time model-based control of plasma processing systems is developed. The methodology is developed for control of two dependent variables (ion flux and chemical densities) by two independent controls (27 MHz power and O2flow). A phenomenological physics model of the nonlinear coupling between the independent controls and the dependent variables of the plasma is presented. By using a design of experiment, the functional dependencies of the response surface are determined. In conjunction with the physical model, the dependencies are used to deconvolve the sensor …

Elliptical Micro-Ring Organic Lasers, P. R. Korade, John Ballato, R, V. Gregory

Chemistry & Biochemistry Faculty Publications

Multimode laser action was observed from optically excited 2,5-dioctyloxy poly(para-phenylene-vinylene), DOO-PPV, micro-rings coaxially deposited around glass optical fibres of elliptical cross-section. The laser emission was found to be dependent upon the incident angle of the excitation and exhibited linewidths of approximately 1.2 Å, quality factors (Q) exceeding 5000, and thresholds below 0.3 μJ pulse. Such elliptical organic micro-ring lasers offer increased tailorability in emission properties over more conventional analogues of circular cross-section. Also discussed is the potential for such low-threshold lasers to serve as integrated sources for fibre lasers and amplifiers.

The Reno Aerosol Optics Study: An Evaluation Of Aerosol Absorption Measurement Methods, Patrick J. Sheridan, W. Patrick Arnott, John A. Ogren, Elisabeth Andrews, Dean B. Atkinson, David S. Covert, Hans Moosmüller, Andreas Petzold, Beat Schmid, Anthony W. Strawa, Ravi Varma, Aki Virkkula

Chemistry Faculty Publications and Presentations

The Reno Aerosol Optics Study (RAOS) was designed and conducted to compare the performance of many existing and new instruments for the in situ measurement of aerosol optical properties with a focus on the determination of aerosol light absorption. For this study, simple test aerosols of black and white particles were generated and combined in external mixtures under low relative humidity conditions and delivered to each measurement system. The aerosol mixing and delivery system was constantly monitored using particle counters and nephelometers to ensure that the same aerosol number concentration and amount reached the different instruments. The aerosol light-scattering measurements …

Development Of Membrane Film Fiber Optic Based Sensors For The Remote Monitoring Of The Quality Of Surface And Groundwater, Leonidas G. Bachas

KWRRI Research Reports

The objective of this study was the development of chromo- and fluoroionophores and their subsequent use in sensors capable of surface and groundwater monitoring. Several reagents (modified crown ethers and porphyrins) were synthesized based on principles of chemical recognition and used for metal and pH sensing. The modified crown ether reagents include a chromogenic or fluorogenic group. The selectivity of these reagents is controlled by the size of the crown ether ring and the type of the chromogenic or fluorogenic side-arm. In addition, a fluorogenic crown ether was synthesized that incorporates a fluorogenic side-arm and a perfluorinated carbon chain. The …

The Design And Construction Of Microprocessor-Computer Controlled Rapid Scanning Fiberoptic Spectrophotometer, Kathleen Marie Tobin

Masters Theses

Conventional spectrophometers require the transfer of a sample to a cuvette for obtaining spectra. The measurement of absorbance in situ can be accomplished using a fiber optic probe which can be placed directly in the sample. The fiber optic probe also minimizes environmental factors such as thermal or vibrational which may affect the absorbing species. A rapid scanning speed allows for essentially simultaneous wavelength monitoring.

The effect of coupling a rapid scanning spectrophotometer with a fiber optic probe provides for an extremely versatile system. When used in comjunction with a microprocessor or computer, this approach offers advantages such as data …

A Laser Interferometric Study Of Electric Field Effects On Methane-Oxygen Flame Plasmas, Mark D. Prairie

Masters Theses

A laser interferometer is developed to study the refractive index field, aerodynamic structure, and three dimensional temperature profile of a methane-oxygen flame system under the influence of D.C. electric fields. A combined graphical-numerical method is used to transform the observed interference patterns into radial temperature distributions. The results indicate that the electric field exerts a marked influence on the flame stability, geometry, and charged particle flow. Experimental evidence shows that these effects are most apparent under fuel rich conditions. It is suggested an electric field may change the concentration gradients of reacting species, leading to an altered course of fuel …