Computer Sciences Commons^™

Distributed Strategy For Power Re-Allocation In High Performance Applications, Vaibhav Sundriyal, Masha Sosonkina

Electrical & Computer Engineering Faculty Publications

To improve the power consumption of parallel applications at the runtime, modern processors provide frequency scaling and power limiting capabilities. In this work, a runtime strategy is proposed to distribute a given power allocation among the cluster nodes assigned to the application while balancing their performance change. The strategy operates in a timeslice-based manner to estimate the current application performance and power usage per node followed by power redistribution across the nodes. Experiments, performed on four nodes (112 cores) of a modern computing platform interconnected with Infiniband showed that even a significant power budget reduction of 20% may result in …

Deepmag+ : Sniffing Mobile Apps In Magnetic Field Through Deep Learning, Rui Ning, Cong Wang, Chunsheng Xin, Jiang Li, Hongyi Wu

Electrical & Computer Engineering Faculty Publications

This paper reports a new side-channel attack to smartphones using the unrestricted magnetic sensor data. We demonstrate that attackers can effectively infer the Apps being used on a smartphone with an accuracy of over 80%, through training a deep Convolutional Neural Networks (CNN). Various signal processing strategies have been studied for feature extractions, including a tempogram based scheme. Moreover, by further exploiting the unrestricted motion sensor to cluster magnetometer data, the sniffing accuracy can increase to as high as 98%. To mitigate such attacks, we propose a noise injection scheme that can effectively reduce the App sniffing accuracy to only …

Priority Based Routing And Link Scheduling For Cognitive Radio Networks, Peng Jiang, Mitchell Zhou, Song Wen

Electrical & Computer Engineering Faculty Publications

To address the challenges caused by the time-varying rate requirement for multimedia communication sessions, we propose a Priority Based Routing and link Scheduling (PBRS) scheme for multi-hop cognitive radio networks. The objective is to minimize disruption to communication sessions due to channel switching as well as to minimize network resource consumption for multimedia applications based on a prioritized routing and resource allocation scheme. PBRS includes a priority based optimization formulation and an efficient algorithm to solve the problem. The main idea is to allocate the available resource to different types of services with their Quality of Experience (QoE) expectation as …

Generative Adversarial Networks For Visible To Infrared Video Conversion, Mohammad Shahab Uddin, Jiang Li, Chiman Kwan (Ed.)

Electrical & Computer Engineering Faculty Publications

Deep learning models are data driven. For example, the most popular convolutional neural network (CNN) model used for image classification or object detection requires large labeled databases for training to achieve competitive performances. This requirement is not difficult to be satisfied in the visible domain since there are lots of labeled video and image databases available nowadays. However, given the less popularity of infrared (IR) camera, the availability of labeled infrared videos or image databases is limited. Therefore, training deep learning models in infrared domain is still challenging. In this chapter, we applied the pix2pix generative adversarial network (Pix2Pix GAN) …

Quantitative Metrics For Mutation Testing, Amani M. Ayad

Dissertations

Program mutation is the process of generating versions of a base program by applying elementary syntactic modifications; this technique has been used in program testing in a variety of applications, most notably to assess the quality of a test data set. A good test set will discover the difference between the original program and mutant except if the mutant is semantically equivalent to the original program, despite being syntactically distinct.

Equivalent mutants are a major nuisance in the practice of mutation testing, because they introduce a significant amount of bias and uncertainty in the analysis of test results; indeed, mutants …

Bio-Inspired Learning And Hardware Acceleration With Emerging Memories, Shruti R. Kulkarni

Dissertations

Machine Learning has permeated many aspects of engineering, ranging from the Internet of Things (IoT) applications to big data analytics. While computing resources available to implement these algorithms have become more powerful, both in terms of the complexity of problems that can be solved and the overall computing speed, the huge energy costs involved remains a significant challenge. The human brain, which has evolved over millions of years, is widely accepted as the most efficient control and cognitive processing platform. Neuro-biological studies have established that information processing in the human brain relies on impulse like signals emitted by neurons called …

Integrated Mobile And Web-Based Application For Enhancing Delivery Of Hiv/Aids Healthcare Information In Tanzania, Ibrahim Mwammenywa

Tanzania Journal of Engineering and Technology (TJET)

This study aims to develop an integrated e-health platform for enhancing delivery of HIV/AIDS healthcare information in Tanzania, which consists of a mobile application and a web-based system. The study is based on the system's functional and non-functional requirements for an e-health system for delivery of HIV/AIDS healthcare information. The Rapid Application Development (RAD) model was adopted during the system development. The system requirements were modelled into Data Flow Diagram (DFD) in order to obtain the clear flow of the HIV/AIDS healthcare information between the clients and HIV/AIDS healthcare practitioners. With the use of different software development tools and environment …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

Generating Energy Data For Machine Learning With Recurrent Generative Adversarial Networks, Mohammad Navid Fekri, Ananda M. Ghosh, Katarina Grolinger

Electrical and Computer Engineering Publications

The smart grid employs computing and communication technologies to embed intelligence into the power grid and, consequently, make the grid more efficient. Machine learning (ML) has been applied for tasks that are important for smart grid operation including energy consumption and generation forecasting, anomaly detection, and state estimation. These ML solutions commonly require sufficient historical data; however, this data is often not readily available because of reasons such as data collection costs and concerns regarding security and privacy. This paper introduces a recurrent generative adversarial network (R-GAN) for generating realistic energy consumption data by learning from real data. Generativea adversarial …

Smart Factories, Dumb Policy? Managing Cybersecurity And Data Privacy Risks In The Industrial Internet Of Things, Scott J. Shackelford

Minnesota Journal of Law, Science & Technology

No abstract provided.

Application Development For Goods Management System Towards Waste Minimization Options, Wan Ahmad Nadzim

Student Works (2020-2029)

Waste is a global concern. Increasing waste generation levels are causing the increase of waste management costs. In fact, the greatest costs of waste are measured by its impacts to the environment, society and economy. Prevention is better than cure—since all wastes come from goods, thus the best way to manage wastes is to manage goods. An application model of goods management system has been developed using GIS (Geographic Information System) and app prototyping. The primary purpose of goods management is to maximize goods and minimize waste by promoting reduction and reuse. GIS was used to perform spatial analyses on …

Finding A Viable Neural Network Architecture For Use With Upper Limb Prosthetics, Maxwell Lavin

Master of Science in Computer Science Theses

This paper attempts to answer the question of if it’s possible to produce a simple, quick, and accurate neural network for the use in upper-limb prosthetics. Through the implementation of convolutional and artificial neural networks and feature extraction on electromyographic data different possible architectures are examined with regards to processing time, complexity, and accuracy. It is found that the most accurate architecture is a multi-entry categorical cross entropy convolutional neural network with 100% accuracy. The issue is that it is also the slowest method requiring 9 minutes to run. The next best method found was a single-entry binary cross entropy …

On Algebraic Structures And Automaton For Optimal Computer Network Design And Performance Study, Xiangrong Ma

UNLV Theses, Dissertations, Professional Papers, and Capstones

For decades, study of computer networks has been concentrated on the use of the well-established OSI or TCP/IP reference models that have found tremendous success in the actual implementation of various network structures and protocols. Lack of theoretical foundation, this implementation-driven, empirical approach, however, is experiencing insurmountable difficulties in delivering, tuning for, and sustaining the promised peak performance of a computer system that is so heavily dependent on the performance of the underline computer networks. This issue is becoming particularly prevalent in today’s cloud-based high-performance computing environment where CPU-time-extensive computation loads need to get distributed among computing machines through high-speed …

Research On Simulation Platform For Equipment System Analysis, Yuping Li, Shaojie Mao, Zhenqi Ju, Zhou Fang, Guoqiang Yan

Journal of System Simulation

Abstract: With the development of equipment construction from platform-centric to network-centric, simulation analysis of equipment system is an important means and tool to support the transformation and development of equipment construction under the condition of multi-task joint operation. Starting from the requirement of system simulation analysis, a cloud-based equipment system simulation architecture is proposed to realize flexible and configurable simulation environment according to task requirements; and a high-performance simulation framework is conducted, which provides strong support for different application modes, such as parallel hyper-real-time and distributed simulation deduction. The unified description, organization and management method of model and data resources …

Parallel Tasks Optimization Scheduling In Cloud Manufacturing System, Chenwei Feng, Wang Yan

Journal of System Simulation

Abstract: To solve the problem of unbalanced resource requirements and low resource utilization when the same type of tasks are executed in parallel in the cloud manufacturing system, a task resource scheduling model with the goal of minimizing cost, minimizing time, maximizing reliability and optimizing quality is established. A non-dominated sorting genetic algorithm based on reference points (NSGA-III) is adopted to solve the model by combining real number matrix coding and crossover and mutation based on real number coding instead of common evolutionary strategy. And an optimal decision strategy based on combination of analytic hierarchy process and entropy value method …

Research On Source Seeking Methods Of Harmful Gas Leakage In Chemical Industry Parks, Zhao Yong, Bin Chen, Xiaodong Wang, Zhengqiu Zhu, Rongxiao Wang, Xiaogang Qiu

Journal of System Simulation

Abstract: Chemical production safety accidents often lead to harmful gas leakage, causing serious environmental damage and casualties. Mastering the information of leaking source quickly can assist in emergency disposal decisions and reduce the harm of accidents. In this paper, Entrotaxis algorithm is used to guide the ground source seeking equipment to move to the vicinity of the leaking source quickly and autonomously in a chemical park scene, and to master the source information. According to the characteristics of the chemical industry park scene, this paper applies intermittent search module into Entrotaxis algorithm and proposes a robust and suitable algorithm (Entrotaxis-Jump …

Multi-Objective Optimization Design Of Aerodynamic Layout For Twin Swept-Wing Aircraft, Yuchang Lei, Dengcheng Zhang, Yanhua Zhang, Guangxu Su, Luo Hao, Zhan Ren

Journal of System Simulation

Abstract: Multi-objective optimization of aerodynamic layout is a key technology in the design of vehicles. The overall configuration of the shape parameters is optimized with a double swept-shaped wave shape as the basic configuration. We use NSGA-Ⅱ multi-objective genetic algorithm, take the aircraft double sweep angle as the design variable, consider the maximum takeoff weight, range, volume ratio and other performance indicators, use Elman neural network to establish the relationship between shape parameters and performance parameters, and establish constraints based on mission planning requirements. The Pareto optimal solution set is obtained by using optimized design and the individuals with …

Fast Simulation Of Yacht In Calm Water Based On Improved Savitsky Method, Xiaochen Li, Yin Yong

Journal of System Simulation

Abstract: An improved Savitsky method is proposed to increase the accuracy of mathematical model of yacht in fast simulation. Three degrees of freedom mathematical model is established to simulate the motion in displacement regime. warped hull forms of yachts are simplified into prismatic hull and improved Savitsky method is used to calculate resistance. The simulation is carried out in pre-planing regime and planing regime. The validity of the proposed method has been assessed by comparing results with previous experimental data, which shows good agreements. The improved method runs well and the result is accurate when it is added to the …

Point Cloud Processing With Neural Networks, Stephanie Miller, Jiahao Li

All Computer Science and Engineering Research

In this project, we explore new techniques and architectures for applying deep neural networks when the input is point cloud data. We first consider applying convolutions on regular pixel and voxel grids, using polynomials of point coordinates and Fourier transforms to get a rich feature representation for all points mapped to the same pixel or voxel. We also apply these ideas to generalize the recently proposed "interpolated convolution", by learning continuous-space kernels as a combination of polynomial and Fourier basis kernels. Experiments on the ModelNet40 dataset demonstrate that our methods have superior performance over the baselines in 3D object recognition.

Study On Optimization Of Shore Bridge Operator Scheduling Considering The Influence Of Ambient Temperature, Yibin Wang, Haihong Yu, Danlan Xie

Journal of System Simulation

Abstract: The refinement of port management puts forward new requirements for its service capacity, and human factors are the key factors affecting the port service capacity. It is a new and feasible research direction to improve port operation efficiency by adjusting human factors. Based on the theoretical model of temperature affecting efficiency, this paper uses FlexSim system simulation software to analyze the change of employee's working efficiency with time, and studies the optimal scheduling strategy of shore bridge operators under different temperatures. Finally, it is concluded that when the ambient temperature is suitable for human body, the eight-hour scheduling …

Synergic Production Scheduling Method For Distributed Multi-Plants Based On Fusion Decision Tree, Wang Yan, Tianlun Jiang

Journal of System Simulation

Abstract: In the synergic production scheduling optimization problem of distributed multi-plants, it is necessary to consider the two stages of job allocation between factories and job scheduling in factories at the same time. This paper first establishes a distributed multi-plant scheduling model with total cost and advance/delay as the optimization objectives, and then proposes a nested optimization algorithm framework integrating ID3 decision tree with Gauss particle swarm optimization. In this framework, independent scheduling optimization within the factory is nested in the process of inter factory allocation optimization, and elite retention strategy is introduced to improve the algorithm optimization. In …

Overview Of Cooperative Target Assignment, Ou Qiao, Xiaoyuan He, Jiuyang Tao

Journal of System Simulation

Abstract: The concept and connotation of combat coordination are briefly analyzed. The historical origin of cooperative target allocation and its orientation in command and control process are expounded. The research status of collaborative target allocation in model building and algorithm solving is analyzed comprehensively, the shortcomings of current research is pointed out. It is proposed that for the next step we should pay more attention to large-scale collaborative target allocation under dynamic and confrontational conditions, and focus on the real-time, adaptability and iterative evolution mechanism of the algorithm.

Research On Clock Synchronization Of Simulation System Based On Ethernet And Optical Fiber Network, Yulin Meng, Shen Tao, Shuaihao Wang, Lüyi Zhao, Chengshi Tang

Journal of System Simulation

Abstract: With the development of simulation communication and Ethernet clock synchronization technology, the traditional timing simulation method based on real-time operating system can not meet the accuracy requirements of clock synchronization between multi-simulation systems. A time synchronization method between simulation systems based on IEEE1588 clock synchronization protocol and optical fiber reflection memory network is proposed, in which the Beidou/GPS timing device periodically calibrates the real-time operating system, and the real-time operating system divides the frequency of the calibrated clock information and synchronizes the clock of each simulation system through the high-speed optical fiber reflection memory network. The clock synchronization …

Research On Control Technology Of Aeroengine Heat Exchanger, Qingyang Jiang, Song Hua

Journal of System Simulation

Abstract: In order to solve the high temperature problem caused by the high speed of the synergistic aspirating engine, this paper designs a control algorithm for the heat exchanger. In the process of designing the control algorithm, considering the strong nonlinearity, uncertainty and strong coupling of the engine, The decoupling study of the multi-input and multi-output linear model of the heat exchanger is carried out. The decoupling effect of two different decoupling methods on the strongly coupled heat exchanger is obtained. The fuzzy decoupling PID controller has short adjustment time and overshoot. Small, conclusions with better decoupling effects.

Downhole Drilling Processing Data Acquisition And Stick Slip Characteristic Analysis, Huang Sheng, Zhang Tao, Chongjun Huang, Yumei Li, Deng Hu, Zhang Xia

Journal of System Simulation

Abstract: During oil drilling process, drill string vibrations are detrimental to the bit and drill string, which even causes failure of equipment. Researches show that, studying the law of near bit vibration data can reduce non-production time (NPT) and improve drilling efficiency. This paper uses power spectral density and wavelet transform to analyze vibration signals, then compares with normal drilling situation to find out stick slip characteristics. The results show that, when stick slip occurs, the mean value of lateral vibration fluctuates greatly, which indicates stick slip is mainly based on torsional vibration. From the perspective of power spectral density …

Research On Mechanical Configuration Of Automatic Container Terminals Based On Simulation Optimization Method, Shaozheng Yu, Dongshi Sun, Chen Jing, Yongchao Li

Journal of System Simulation

Abstract: In the study of mechanical configuration problem of automated container terminal, a system simulation model based on discrete event simulation is constructed. The key parameters and interference factors that affect the performance of the system are fully considered in the model and a mechanical scheduling algorithm interface to ensure the effectiveness of the simulation model is designed. On the premise of ensuring the reliability of the container terminal system, a cycle optimization method of mechanical configuration scheme is proposed to minimize the cost. An example is given to solve the mechanical configuration scheme of an automatic container terminal. …

Research On The Simulation Technology For Multi-Aerocraft Cooperative Guidance, Li Jing, Han Jian, Zhang Qing

Journal of System Simulation

Abstract: The formal system of multi- aerocraft cooperative simulation system is identified as the discrete event system & different equation system specifications (DEV&DESS) through the analysis of the composition and running mechanism. The running control problem of cooperative simulation system is transformed into simulation control problem of a specific DEV&DESS system. A dynamic operation control method for cooperative guidance simulation system based on coordinator is proposed, and this method is validated by real-time mathematical simulation experiments.

Knowledge Representation Method Of Joint Operation Situation Based On Knowledge Graph, Baokui Wang, Wu Lin, Xiaofeng Hu, Xiaoyuan He

Journal of System Simulation

Abstract: Lacking of common knowledge for understanding and judging complex situation of operation by machines is one of the difficulties in intelligent situation cognition. The knowledge representation methods based on knowledge graph are reviewed. The characteristics and difficulties of joint operation situation knowledge representation are analyzed. Moreover, the concept of scenario knowledge graph is presented, as well as the knowledge sources and basic content of scenario knowledge graph are described. This paper also points out that the joint knowledge representation method based on discrete symbols and continuous vectors in specific scenario is an effective way to express joint operation situation …

Decision-Making Method For Formulating Spares Reserve Scheme Based On Deep Neural Network, Yunjing Zhang, Guangming Tang, Xiaoyu Xu

Journal of System Simulation

Abstract: Spare parts classification is important for spare parts storage and is a key part of spare parts decision-making activities. This paper analyzes the factors affecting the reserve scheme of wartime spares. Then by analyzing the inherent attributes of wartime spares, two methods of spare parts classification are proposed to determine the variety and quantity of wartime spares based on deep neural network: (1) Ranks wartime spares according to their importance. A relatively simple deep neural network is used to analyze every attribute of the wartime spares in turn; (2) Inputs all the attributes of wartime spares into a relatively …

A Mesh Model Simplification Method Based On Visual Feature Preservation, Che Li, Dejun Tang, Shimin Li, Fengju Kang

Journal of System Simulation

Abstract: Aiming at the problems of mesh visual feature loss and oversimplification in mesh simplification algorithm, a visual feature preservation based triangle mesh model simplification algorithm is proposed. The multi-viewpoint perception method is used to measure the visual perception error caused by the difference between the original and the simplified model in the two-dimensional view under the optimal viewpoint set. Based on QEM algorithm, a novel geometric error metric is built by introducing the triangle shape factor. The triangle collapse error function is defined by combining visual perception and geometric error to control the simplified depth of the model. Through …