Polymer Chemistry Commons^™

Identification Of Modified Polymer End Groups For Correlations To Physical Properties, Tj Sacco

Williams Honors College, Honors Research Projects

Plastic has become the primary material for containers in both industrial and commercial fields. Plastics are the optimal choice since they have many physical properties that make them ideal candidates: durability, heat resistance, chemical stability, as well as their inexpensive production cost. Nowadays, the desire for more versatile plastics with strength, flexibility, hydrophobicity, and biodegradability has grown; however, concerns for plastic use have started to rise as well. The overuse of plastics poses a threat to the environment and people’s health: plastics are hard to break down completely which results in the formation of micro(nano)plastics (MNPs). In attempts to circumvent …

Photo-Enhanced Output In Memdiode Devices Based On Hybrid Materials Open Access, Jacob Lee, Prabir Patra, Judy Fan

Physics Faculty Research

The discovery of photo-enhanced outputs in the fabricated memdiodes based on metal halide-embedded polymeric hybrid composites has meaningful and practical implications. The two-terminal devices exhibit typical rectifying characteristics, similar to a standard pn junction diode, with unusual photo-enhanced charge transportation and hysteresis behaviors. The MDs consist of an active layer of blended organic–inorganic hybrid material [a mixture of CuCl2 and polyethylene glycol (PEG)] deposited on a layer of pure polymer (polymethyl methacrylate) and, in turn, on a rigid substrate (ITO glass or Si wafer). It is found that the photoinduced current increases hundreds of times in magnitude on the ITO …

Biobased Acrylate Composites With Enhanced Strength For Additive Manufacturing, Nicole Wagner, Joseph Mcwherter

Engineering Faculty Articles and Research

With the expanding use of polymers in additive manufacturing, sustainable resins for use in vat photopolymerization are required to reduce their environmental impact. One promising approach to achieve this is to incorporate biobased fillers that replace the acrylates in photopolymer resins as ‘green’ alternatives. In this study, photopolymer composites consisting of a methacrylate resin with varying calcium carbonate powder content between 0 and 50 wt.% were investigated. A digital light processing technique was used to fabricate tensile test specimens for mechanical testing. Good printability, dimensional accuracy, and good interlayer adhesion were observed for composite resin formulations that incorporated calcium carbonate …

Nanoparticles And The Environment: Biopolymer Grafted Cellulose And Screen-Printed Carbon Nanotube Composites, Dominique Henry Porcincula

Master's Theses

A host of environmental issues will define the state of the environment in the 21^st century, with plastic pollution and water shortages among them. While solutions to these problems require large-scale, multipronged solutions, one way we can address them is through material innovation and the use of nanoparticles.

In the first project, we address the issue of plastic pollution by creating nanocomposites of biodegradable polymers (PLA and PCL) with cellulose nanofibrils. Here, PLA and PCL are grafted from the surface of cellulose nanofibrils via ring-opening polymerization of cyclic ester monomers. Polymer-grafted cellulose (PGC) is characterized with structural analysis, solubility …

Atom Economical Reactions Of Terpenoids And Post-Consumer Plastics With Sulfur, Charini Maladeniya

All Dissertations

The production of Ordinary Portland Cement (OPC) and its uses have a complicated environmental impact, which is influenced by infrastructure development and building operations as well as CO₂ emissions, which account for 7% of all worldwide CO₂ emissions. Due to the increasing population, production is still ongoing. The search for cement and construction materials produced with zero to low CO₂ emissions is therefore continuous. Finding recyclable, CO₂ gas-free biocomposites with high sulfur content that can rival the mechanical properties of popular building supplies like Portland cement is the primary objective of the research discussed in this …

Design And Fabrication Of Single-Chain Nanoparticles, Vitrimers, Bottlebrush And Comb Polymers, Logan Dugas

Dissertations

The introduction of novel dynamic exchange chemistries into polymer chains and networks has shown great potential of giving next generation polymeric materials. Within the scope of this thesis, dynamic chemistry is employed to realize single-chain nanoparticles, vitrimer networks, bottlebrush and comb polymers. CHAPTER I provides a broad introduction to the topics at hand, focusing upon the techniques utilized to achieve such materials with relevant literature and understanding of the techniques and architectures explored. CHAPTER II focuses upon the synthesis of single-chain nanoparticles via a copolymerization of polyisobutylene macromonomers with norbornene monomers equipped with pendant anthracene moieties. Through this work, the …

Design Of Antioxidant Monomer, Augustine Osilamah Yusuf

Masters Theses & Specialist Projects

Reactive oxygen species such as hydrogen peroxide are present at the sites of inflammation in the body. Degradable polymeric nanoparticles have shown great promise in a range of biomedical applications which include preferential delivery of therapeutics to such inflamed sites. We are working towards a new class of materials expected to have tunable degradation rates in the presence of hydrogen peroxide. These new materials consist of three parts: degradable linkages, antioxidant groups, and unreactive filler monomers such as methylmethacrylate. We have synthesized a polymerization initiator with a degradable linkage, and we have shown that using this initiator to synthesize another …

Characterization, Immobilization, And Polymer Related Applications Of Watermelon Seed Powder, A Practical Source Of Urease Enzyme, Anthony Quan Quoc Mai

LSU Doctoral Dissertations

Urease enzyme was crystallized almost a century ago, and to this day its intrinsic stability is not ideal for everyday applications. This work introduces a new process by which a naturally encapsulated material, watermelon seed powder (WMSP), is characterized for its stability and activity. WMSP enzymatic activity has been measured for over a year at various storage conditions—exposed to ambient atmosphere for a year, WMSP retained above 90% activity. In aqueous conditions, the enzyme maintained above 60% activity after two months; with the addition of a preservative that number stays at about 90%. There is a pH shift of the …

Degradation Of Natural And Synthetic Fibers In Various Aqueous Environments, Jaylin Bryant

Honors Scholars Collaborative Projects

Fabrics are one variant of polymers, macromolecules that form the foundation of our society. They consist of small subunits called monomers, which are covalently bonded together and layered over each other through intermolecular attractions. There are natural fabrics, such as cotton and silk, and synthetic fabrics like polyester and rayon. Scientists in forensic taphonomy study postmortem changes made to human remains, which can also include clothes found at the scene. In this study, the degradation rates of four white fabrics (cotton, polyester, rayon, and silk) were observed in various aqueous environments (pure, chlorinated, sea, and lake) in order to observe …

Establishing Independent Tunability Of The Mechanical And Transport Properties Of Polymer Gels, Lucas Rankin

Master’s Theses

Polymer gels can be used in the fabrication of materials for filtering liquid and gaseous media, solid-state electrolytes, and transdermal medical patches. This diverse range of applications primarily relies on the transport and mechanical properties of polymer gels. Both sets of properties have shown excellent tunability, but typically in a coupled fashion. Establishing the independent tunability of the transport and mechanical properties of polymer gels (using simple, cost-effective methods) is paramount if polymer gels are to be used to their full potential. Specifically, block copolymer gels self-assemble into organized nanoscale networks within the gel solvent, which allows for facile control …

Functionalized Materials From Atom Transfer Radical Processes, Sean Fischer

Electronic Theses and Dissertations

This work is focused on the synthesis, characterization, and application of functionalized materials prepared from atom transfer radical processes. Atom transfer radical processes encompass both atom transfer radical addition (ATRA) and polymerization (ATRP) reactions, both of which are catalyzed by ppm amounts of copper complexes. The synthetic efforts of ATRA include increasing adduct selectivity through optimization of reaction conditions to generate small molecules in high to moderate yields. ATRA provides retention of the halogen moiety, which is an attractive functional group that can be further modified with other transformations. Specifically, the copper-catalyzed azide-alkyne [3+2] cycloaddition (CuAAC) allows for the realization …

Control Of Corrosion On Ss316l Using Surface Initiated Polymers, Alexander Rupprecht

Electronic Theses and Dissertations

Pitting corrosion is arguably one of the most destructive and dangerous forms of corrosion, resulting in damage to structures, the environment, and public health. In addition, damage caused to structures such as bridges, pipelines, and boats, corrosion also has a profound effect on the biomedical community. Implanted metallic devices (i.e., vascular stents and artificial joints) are prone to pitting corrosion caused by aggressive ions present in extracellular fluid. To provide a corrosion-resistant surface on SS316L, films of poly(styrene), poly(methyl acrylate), and poly(methyl methacrylate) were formed using surface-initiated atom transfer radical polymerization (SI-ATRP). The resulting hydrophobic polymer films had a fractional …

Discriminating Azo Dyes: Conjugated Polymers, The Inner Filter Effect, And Array Sensors, Erin Crater

Honors Theses

Azo dyes are abundant pollutants that contaminate water supplies and threaten humans, biota, and ecosystem health. Their detection and discrimination are an incredible challenge due to the structural, chemical, and optical similarities between dyes, the complexity of the wastewater environment in which they are found, and their low environmental concentrations. In this work, the inner filter effect (IFE), combined with conjugated polymer array-based sensing, is utilized for the quantitative profiling of these pollutants. The array was constructed using three fluorescent, anionic conjugated polyelectrolytes whose varying spectroscopic properties led to distinct IFE patterns in the presence of the dyes. The unique …

Synthesis Of Bio-Based Polymer Products, Joshua Sukie

Williams Honors College, Honors Research Projects

The project covers the synthesis of two bio-based polymers. One aspect of the research investigates the synthesis of materials for use in vegetable oil-based UV-curable coating, and the subsequent polymerization of the materials into a coating film. The second aspect of the research follows the synthesis of a functionalized cellulose material for use as a reinforcer in a vegetable oil-based composite. Both products are subsequently analyzed by various methods.

Nanomaterials For Double-Stranded Rna Delivery, Stuart Lichtenberg

Theses and Dissertations--Plant and Soil Sciences

RNA interference has enormous potential as a potent, specific, and environmentally friendly alternative to small molecule pesticides for crop protection. The use of exogenous double-stranded RNA offers flexibility in targeting and use in crops in which transgenic manipulation is not an option. The combination of RNAi with nanotechnology offers further advantages that are not available with dsRNA alone. In this work, I have evaluated several different combinations of nanomaterials and polymers for use in RNAi-based pest control systems. First, I have characterized the use of chitosan/dsRNA polyplex nanoparticles for gene knockdown using the model nematode Caenorhabditis elegans. Though chitosan/dsRNA …

Synthesis Of N-Heterocyclic Molecules And Their Applicability Towards Ion Sensing: Polymeric Chemosensors, Aikohi M. Ugboya

College of Graduate Studies: Theses & Dissertations

Critical to biological and environmental processes are anions because often times their relative concentration in our body can be an indicator of one’s well-being. Therefore, highly sensitive and cost-efficient methods for ions recognition is necessary for human health. In recent times, polymeric chemosensors have become a vital tool for sensing ions because of its higher sensitivity and good mechanical properties compared to their monomeric counterparts. These sensors are designed to produce a measurable response in the presence of a targeted ion such as an electrochemical or optical signal. The unique structure and the photophysical properties of the 1,2,3-triazole core coupled …

Influence Of High Aspect Ratio Nanoparticle Filler Addition On Piezoelectric Nanocomposites, Jeremy A. Armas

Master's Theses

Piezoelectric nanogenerators (PNGs) are a new class of energy harvesting materials that show potential as a direct energy source for low powered electronics. Recently, piezoelectric polymers have been utilized for PNG technology due to low toxicity, high flexibility, and facile solution processing which provide manufacturing opportunities such as screen printing. Throughout the last decade, countless projects have focused on how to enhance the energy harvesting capabilities of these PNGs through the incorporation of nanoparticle fillers, which have been reported to enhance the piezoelectric properties of the film either directly through their intrinsic piezoelectric properties or through acting as surfaces for …

Synthesis Of A Silsesquioxane Based Supramolecular Polymer, Rachel Bianculli

Honors Projects

Research toward smart materials, specifically self-healing polymers, is an expanding topic within the materials science field. These materials rely heavily on dynamic crosslinking that is achieved by inducing different degrees of hydrogen bonding, van der Waals forces, etc. This work, demonstrated by research previously done within the Ostrowski research group, shows how coordination bonds of transition metals have been shown to create light activated, self-healing properties. Work done with these light-activated chromium (III) complexes with a poly(butylyene-co-ethylene) backbone have shown how metal—ligand coordination geometries can tune mechanical properties of the polymeric material. However, these materials suffer from being incredibly soft …

Synthesis And Characterization Of Mpims : Metallopolymers Of Intrinsic Microporosity, Kelly Walter

Legacy Theses & Dissertations (2009 - 2024)

Polymers of intrinsic microporosity (PIMs) are class of polymers known for high surface areas arising from their contorted and rigid backbone structures. While high surface area compounds are applicable in many fields, simultaneous solubility and conductivity in PIMs is still lacking. In general, the monomeric units that form the backbone, necessary to yield inefficient polymer strand packing and contortion, also break conjugation in the along the polymer backbone and therefore limit conductivity. It has been previously noted that extended conjugation and the addition of metal atoms (along the backbone) increases conductivity. We therefore sought to use a strategy whereby the …

Characterization Of Coacervate Systems Using Redox Sensitive Dyes, Caleb Kaiser

All Master's Theses

Coacervates are systems that spontaneously form when two oppositely charged polyelectrolytes are mixed in a concentrated salt solution. When coacervates form, a biphasic equilibrium occurs in the sample with two phases present in the solution. The two phases are described as the dense phase and the lean phase, named after the amount of polyelectrolyte material in each phase. Coacervates have been topics of interest to researchers in a variety of fields including biomedical applications, drug delivery devices, and more. This thesis worked towards the characterization of coacervate systems on the molecular level by investigating the interaction of the polyelectrolytes and …

Advancing Structure-Property Relationships In Functional Materials Via Thiol-Ene Photopolymerization, Brian Richard Donovan

Dissertations

Thiol-ene photopolymerizations provide a robust and versatile synthetic pathway to functional materials, and owing to the radical step-growth nature of polymerization and the resulting homogenous network structure, provide non-convoluted insight into how network chemistry influences and dictates macromolecular properties.

The first facet of this dissertation focuses on the design and synthesis of bio-inspired, thin film adhesives for dry and aqueous adhesion. Drawing inspiration from the intertidal marine mussel, Chapter II details the synthesis of adhesive networks containing a monofunctional catechol-based monomer. The inclusion of a catechol group resulted in significant improvements in adhesion on a variety of substrates. In Chapter …

Polymer Micelle Formulation For The Proteasome Inhibitor Drug Carfilzomib: Anticancer Efficacy And Pharmacokinetic Studies In Mice, Ji Eun Park, Se-Eun Chun, Derek Alexander Reichel, Jee Sun Min, Su-Chan Lee, Songhee Han, Gongmi Ryoo, Yunseok Oh, Shin-Hyung Park, Heon-Min Ryu, Kyung Bo Kim, Ho-Young Lee, Soo Kyung Bae, Younsoo Bae, Wooin Lee

Pharmaceutical Sciences Faculty Publications

Carfilzomib (CFZ) is a peptide epoxyketone proteasome inhibitor approved for the treatment of multiple myeloma (MM). Despite the remarkable efficacy of CFZ against MM, the clinical trials in patients with solid cancers yielded rather disappointing results with minimal clinical benefits. Rapid degradation of CFZ in vivo and its poor penetration to tumor sites are considered to be major factors limiting its efficacy against solid cancers. We previously reported that polymer micelles (PMs) composed of biodegradable block copolymers poly(ethylene glycol) (PEG) and poly(caprolactone) (PCL) can improve the metabolic stability of CFZ in vitro. Here, we prepared the CFZ-loaded PM, PEG-PCL-deoxycholic …

To Bend Or Not To Bend – Are Heteroatom Interactions Within Conjugated Molecules Effective In Dictating Conformation And Planarity?, Gary Conboy, Howard J. Spencer, Enrico Angioni, Alexander L. Kanibolotsky, Neil J. Findlay, Simon J. Coles, Claire Wilson, Mateusz B. Pitak, Chad Risko, Veaceslav Coropceanu, Jean-Luc Brédas, Peter J. Skabara

Chemistry Faculty Publications

We consider the roles of heteroatoms (mainly nitrogen, the halogens and the chalcogens) in dictating the conformation of linear conjugated molecules and polymers through non-covalent intramolecular interactions. Whilst hydrogen bonding is a competitive and sometimes more influential interaction, we provide unambiguous evidence that heteroatoms are able to determine the conformation of such materials with reasonable predictability.

Effect Of Surfactant Architecture On Conformational Transitions Of Conjugated Polyelectrolytes, Greg A. Braggin

Master's Theses

Water soluble conjugated polyelectrolytes (CPEs), which fall under the category of conductive polymers, possess numerous advantages over other conductive materials for the fabrication of electronic devices. Namely, the processing of water soluble conjugated polyelectrolytes into thin film electronic devices is much less costly as compared to the processing of inorganic materials. Moreover, the handling of conjugated polyelectrolytes can be performed in a much more environmentally friendly manner than in the processing of other conjugated polymers because conjugated polyelectrolytes are water soluble, whereas other polymers will only dissolve in toxic organic solvents. The processing of electronic devices containing inorganic constituents such …

Initiated Chemical Vapor Deposition (Icvd) Polymer Thin Films : Structure-Property Effects On Thermal Degradation And Adhesion, Vijay Jain Bharamaiah Jeevendrakumar

Legacy Theses & Dissertations (2009 - 2024)

Opportunities and challenges for chemical vapor deposition (CVD) of polymer thin films stems from their applications in electronics, sensors, and adhesives with demands for control over film composition, conformity and stability. Initiated chemical vapor deposition (iCVD) is a subset of the CVD technique that conjoins bulk free-radical polymerization chemistry with gas-phase processing. The novelty of iCVD technique stems from the use of an initiator that can be activated at low energies (150 – 300 °C) to react with surface adsorbed monomer to form a polymer film. This reduces risk for potential unwarranted side-reactions.

Form Factor Of Pnipam Microgels In Overpacked States, U. Gasser, J. S. Hyatt, J.- J. Lietor-Santos, E. S. Herman, L. Andrew Lyon, A. Fernandez-Nieves

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

We study the form factor of thermoresponsive microgels based on poly(N-isopropylacrylamide) at high generalized volume fractions, ζ, where the particles must shrink or interpenetrate to fit into the available space. Small-angle neutron scattering with contrast matching techniques is used to determine the particle form factor. We find that the particle size is constant up to a volume fraction roughly between random close packing and space filling. Beyond this point, the particle size decreases with increasing particle concentration; this decrease is found to occur with little interpenetration. Noteworthily, the suspensions remain liquid-like for ζ larger than 1, emphasizing the importance of …

Tandem Mass Spectrometry Of Multiply Charged Polymers: Using Ms3 Strategies For Full Structural Characterization Of Polyacrylamides, Paul M. Krauss

Williams Honors College, Honors Research Projects

In mass spectrometry, a compound is taken and converted into a gas-phase ion by an electrical charge (Balogh, 2009). From these ions, a chart is then created that displays the mass to charge ratio, which is able to then be analyzed to find out the charge of the ions, as well as the mass of the compound (Balogh, 2009). One specific type of mass spectrometry there is available is known as a fragmentation spectrometry. In fragmentation spectrometry, the molecule is not only ionized and analyzed, but fragmented parts that are formed into ions are also ionized and analyzed. This is …

Polymers Used In Medicine: Common Types And Benefits Of Drug Delivery Systems, Camille Andrews

Natural Sciences Student Research Presentations

This poster describes the common types and benefits of drug delivery systems.

Synthesis And Characterization Of Linear And Branched Polylactic Acid For Use In Food Packaging Applications, Kyle C. Bentz

Master's Theses

Polylactic acid (PLA) resins of various molecular weights and molecular weight distributions were synthesized. Linear, narrow molecular weight distribution (MWD) PLA resins were synthesized, as well as resins containing both high molecular weight branched structures and low molecular weight chains and oligomers. Narrow MWD resins were synthesized for use as adhesives for corrugated paperboard and broad MWD resins were synthesized for use as a waterborne coating. PLA resins were dispersed for use as a waterborne coating. Success has been made at forming films utilizing various plasticizers and surfactants as well as polyvinyl alcohol as dispersing agents. A cold dispersion procedure …

Bulk Modulus Of Poly(N-Isopropylacrylamide) Microgels Through The Swelling Transition, B. Sierra-Martin, Y. Laporte, A. B. South, L. Andrew Lyon, A. Fernandez-Nieves

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

We report measurements of the bulk modulus of individual poly(N-isopropylacrylamide) microgels along their swelling transition. The modulus is determined by measuring the volume deformation of the microgel as a function of osmotic pressure using dextran solutions. We find that the modulus softens through the transition, displaying a nonmonotonous behavior with temperature. This feature is correctly reproduced by the theory of Flory for polymer gels, once the concentration dependence of the solvency parameter is properly incorporated.