Polymer Chemistry Commons^™

Electrical And Structural Studies Of Polyacrylonitrile (Pan) Complexed With Inorganic Salts., Khairul Bahiyah Md Isa

Student Works (2010-2019)

In the present study, polymer electrolyte films composed of polyacrylonitrile (PAN) as a host polymer, ethylene carbonate (EC) as the plasticizer and lithium triflate (LiCF3SO3) and sodium triflate (NaCF3SO3) as dopant salts were prepared by the solution cast technique. Five systems of polymer electrolytes films have been prepared; these systems are the plasticized-PAN system i.e. PAN-EC system, two salted-PAN systems i.e. PAN-LiCF3SO3 and PAN-NaCF3SO3, and two plasticized-salted PAN systems i.e. PAN-EC-LiCF3SO3 and PAN-EC-NaCF3SO3. The pure PAN film was prepared as a reference. The ionic conductivity for each system is characterized using impedance spectroscopy. The room temperature conductivity of the pure …

A Characterization Of Caffeine Imprinted Polypyrrole Electrode, Deepika Mandadi

Masters Theses & Specialist Projects

Nanotechnology holds great potential for improving our lives by creating many new materials and devices in medical sciences, electronics and also in energy production. Molecularly imprinted polymers (MIPs) are highly stable synthetic polymers that possess molecular recognition properties due to cavities created in the polymer matrix that are complementary to an analyte both in shape and in positioning of functional groups. These MIPs have been widely employed for diverse applications (e.g., in chromatographic separation, drug screening, chemosensors, catalysis, immunoassays etc) due to their specificity towards the target molecules and high stability against physicochemical perturbations. Conductive polymers, (CPs) such as polypyrrole, …

Interface Slippage Study Between Polyamide 12 And Ethylene Butene Copolymer Melt In Capillary Extrusion, Jinhai Yang, James L. White

Faculty Publications

Extrusion of a polyamide 12 (PA12) material through a capillary die coated with an ethylene butene copolymer (EBM) was studied. The EBM coated die significantly increased the flow rates of the PA12 melt compared to a clean die at the same extrusion pressure. Introducing a maleic anhydride grafted ethylene-octene copolymer (EOM-g-MAH) into the EBM suppressed the effect. This behavior seems only explained by significant interface slippage between PA12 and EBM melts, which could be eliminated by introducing covalent chemical bonds across the interface. A mathematical analysis was carried out to calculate the interface slippage. The shear stress where slippage began …

A Selectivity Study On The Use Of Caffeine And Theobromine Imprinted Polypyrrole Surface Electrodes, Anil Kiran Kumar Vinjamuri

Masters Theses & Specialist Projects

Molecularly imprinted polymers (MIPs) are proving to be very effective in development of synthetic recognition systems and are of great interest to those interested in the field of sensor technology. The use of MIPs is receiving considerable interest due to the ability to prepare recognition matrices that possess high substrate selectivity and specificity. Conducting polymers (CP) have proved to be an excellent tool for the preparation of nano-structured biologically selective systems. Polypyrrole (Ppy) is one such CP that is extensively used for the construction of bioanalytical sensors. Ppy has shown great promise primarily due to its biocompatibility and thermal stability …

Semifluorinated Polymers Via Cycloaddition And Nucleophilic Addition Reactions Of Aromatic Trifluorovinylethers, Scott Iacono

All Dissertations

This dissertation encompasses the synthesis, characterization, and properties of semifluorinated polymers derived from thermal polymerization of aryl trifluorovinyl ether (TFVE) monomers. This work is divided into two parts based on the methodology of thermal polymerization using aryl TFVE monomers. The first part of this work involves the thermal [2 + 2]cyclodimerization of aryl TFVE monomers affording perfluorocyclobutyl (PFCB) aryl ether polymers. Chapter 1 provides an overview of PFCB aryl ether polymers as a next-generation class of high performance fluoropolymers that have been successfully employed for a myriad of technologies. PFCB aryl ether polymers are highly desired because of their high …

Systematic Synthesis And Study Of The Structure-Property Relationships Of Arylene Vinylene Polymers., Patrick Lynch

Doctoral

Much is known about the electronic, vibrational and steric effects resulting from the addition of differing organic functional groups as side chains, to the parent conjugated polymer. However the same cannot be said about the substitution of constituents of the polymer backbone itself. To this end a study is presented here which systematically studies the effects of naphthalene and anthracene substitution of the properties of poly phenylene vinylene (PPV) derivative conjugated polymers. The synthesis by the Witting-Horner reaction of derivatives is presented whereby the phenylene units of the PPV structure are methodically substituted by naphthylene and anthrylene units to form …

Surge Of Green: A Sustainable Approach To Conductive Polymers, Bethany Masten

Undergraduate Review

No abstract provided.

Excimer Emission From Cathode Boundary Layer Discharges, Mohamed Moselhy, Karl H. Schoenbach

Bioelectrics Publications

The excimer emission from direct current glow discharges between a planar cathode and a ring-shaped anode of 0.75 and 1.5 mm diameter, respectively, separated by a gap of 250 μm, was studied in xenon and argon in a pressure range from 75 to 760 Torr. The thickness of the “cathode boundary layer” plasma, in the 100 μm range, and a discharge sustaining voltage of approximately 200 V, indicates that the discharge is restricted to the cathode fall and the negative glow. The radiant excimer emittance at 172 nm increases with pressure and reaches a value of 4 W/cm² for …

Insight Into The Selectivity Of Molecular Imprinted Polymers, Thomas Patrick O'Brien

Seton Hall University Dissertations and Theses (ETDs)

.

Gas Permeation Measurements On Small Polymer Specimens, Karen S. Burns

Chemistry & Biochemistry Theses & Dissertations

Mass spectrometry was used to measure oxygen and nitrogen permeabilities while polarography was used to measure oxygen permeabilities for several contact lens materials. Applicable sample holders were designed and fabricated to accommodate curved and flat specimens with surface areas of 0.5 cm² and 1.0 cm² and thicknesses between 0.025 mm and 0.500 mm. A prepared standard was used to calibrate the mass spectrometric analyses.

The oxygen permeability values determined by mass spectrometry were significantly greater than those determined by polarography. This was attributed to the phase boundary phenomena and the limiting oxygen permeance of water inherent in the …

The Synthesis Of New Maleimide Addition Polymer Precursors, Richard B. Brown

Chemistry & Biochemistry Theses & Dissertations

1H-2,3-dimethylpyrrolo(1,2-a) benzimidazol-l-one (27) and 1H,9H- 2,3,7,8-tetramethyl-bispyrrolo(1,2-a:6,7-a')benzodiimidazo1-1,9-dione (32) have been synthesized from dimethylmaleic anhydride and o-phenylenediamine and 1,2,4,5-tetraaminobenzene, respectively. The presence of reactive olefinic double bonds in the synthesized compounds was of interest as a site for possible addition polymerization.

The synthetic route involved, in both cases, a simple nucleophilic substitution reaction between the diamine(or tetraamine) and the anhydride to form an intermediate amide-acid-amine which rapidly cyclized to the imide amine. The final ring closure required more rigorous conditions and occurred at melt reaction temperatures.