Polymer Chemistry Commons^™

Towards Semiconductor Nanorods With Nickel/Iron Cocatalyst., Kehinde Ayorinde

Masters Theses & Specialist Projects

The adverse effects associated with the utilization of fossil fuels has led to the need to provide an alternative cleaner energy. Photocatalytic hydrogen evolution reaction via water splitting provides a renewable pathway to generating energy. Our photocatalyst system includes a semiconductor component (CdSe/CdS core/shell nanorods) to capture light and an attached metal (cocatalyst) for the hydrogen evolution reaction. Platinum is an effective metal catalyst for this reaction due to strong proton binding energy that easily facilitates the reduction of water to produce hydrogen gas. However, due to the high cost of platinum, there is a need to find a less …

Application Of Gellan Gum Biopolymer In Biomedical Applications: A Review, Norsyakirah Izzati Hishamuddin, Mohd Hasmizam Razali, Khairul Anuar Mat Amin

Makara Journal of Science

Gellan gum (GG) has gained considerable attention in the food, chemical, and pharmaceutical industries due to its functional characteristics. It has versatile properties, such as water solubility, easy bio-fabrication, good film/hydrogel-formation, biodegradability, and biocompatibility. These properties render GG a promising material in biomedical applications, specifically in the development of wound dressing materials. In this review, the use of GG biopolymer as a wound dressing material was discussed. Various fillers, such as titanium dioxides, clay, drug, and honey, have been incorporated in GG to produce film, hydrogel, or scaffold materials. The effects of filler on the mechanical performance, physical properties, antibacterial …

Kinetics, Characterization, And Applications In The Development Of Next-Generation Cure-On-Demand Polymeric Materials Through Frontal Polymerization, Daniel Paul Gary

LSU Doctoral Dissertations

Frontal polymerization (FP) is a process in which a front propagates in a localized reaction zone converting monomer into polymer. This work explored the kinetics and applications of FP for the development of cure-on-demand materials.

The kinetic effects of fillers on frontal polymerization have not been thoroughly explored. In Chapter 2, various fillers were used, and their effects on front velocity and front temperature were determined. Clay minerals are primarily used, but the thermal conductive effects of milled carbon fiber were also explored. It was found that some fillers inhibit frontal polymerization through radical scavenging, while others increased the front …

Characterization Of Functionalized Carbon Nanotubes And Polystyrene/Cnt Composites Prepared With Microwave-Induced Polymerization, Allen Hulette

College of Graduate Studies: Theses & Dissertations

The use of carbon nanotubes in polymer composites can increase the mechanical properties of the resulting product. Carbon nanotubes are known to have chemical interactions that make them attracted to one another and fall out of solution. To reduce this agglomeration and disperse the mechanical properties throughout the composite, functional groups are covalently added to the carbon nanotubes. Another known property of carbon nanotubes is their ability to absorb microwaves and convert it into other forms of energy. This research investigates the effects of carbon nanotube absorption of microwaves and initiation of styrene monomer polymerization. Grignard reactions are used to …

Synthesis Of Functional Chalcone Library For Use In Aza- Dipyrromethene Dye Systems, Kendal Crawley

Murray State Theses and Dissertations

Over the past decade, Aza-Bodipy dyes (ADPs), a derivative of the extensively studied BF₂-dipyrromethene (BODIPY), have become a growing field of research due to their unique photophysical properties, high yielding synthesis, and relative stability. They possess a unique spectral window of 600 to 750 nm which is the red to near-IR region, evidenced by the blue color of many of these dyes. Increasing interest in these dyes is due to this near-IR window which is important for many applications.^1-4 ADP chromophores also have a common core motif to that of phthalocyanines which allow for coordination at their …

Molecular Engineering Of Self-Immolative Polymers As Chemically Responsive Temporary Adhesives For Protective Garments, Hana J. Yarbrough

Dartmouth College Master’s Theses

The long-term goal of this thesis is to design novel chemical protective garments that both shield and sense for chemical warfare agents. The overarching hypothesis of this work is that joining textiles with a chemically responsive temporary adhesive will reduce the permeability of and detect hazardous analytes across fabric boundaries. Work towards achieving this goal and testing this hypothesis is separated into two chapters. The first chapter reports the development of a self-immolative polymer, poly(phthalaldehyde), into a stimuli-responsive temporary adhesive. Developing poly(phthalaldehyde) as a robust adhesive that rapidly releases substrates would be a significant and novel contribution to the fields …

Theoretical Investigation On Optical Properties Of 2d Materials And Mechanical Properties Of Polymer Composites At Molecular Level, Geeta Sachdeva

Dissertations, Master's Theses and Master's Reports

The field of two-dimensional (2D) layered materials provides a new platform for studying diverse physical phenomena that are scientifically interesting and relevant for technological applications. Theoretical predictions from atomically resolved computational simulations of 2D materials play a pivotal role in designing and advancing these developments. The focus of this thesis is 2D materials especially graphene and BN studied using density functional theory (DFT) and molecular dynamics (MD) simulations. In the first half of the thesis, the electronic structure and optical properties are discussed for graphene, antimonene, and borophene. It is found that the absorbance in (atomically flat) multilayer antimonene (group …

Development Of Peg-B-Pla Based Micelles For Neutralization Of A Toxic Peptide, Giselle Campos

Graduate Theses/Dissertations

I herein report the preparation and characterization of PEG-b-PLA block copolymer micelles and PEG-b-PLA/PLA mixed micelles as potential “plastic antidotes” for a toxic peptide, melittin. PEG-b-PLA micelles have been used in a number of biomedical applications for their biodegradability and biocompatibility. Along these lines, I investigated the colloidal stability and the peptide absorption properties of PEG-b-PLA/PLA mixed micelles. A series of PEG-b-PLA block copolymer micelles and PEG-b-PLA/PLA mixed micelles were prepared, and their colloidal stability was studied. The hydrodynamic diameters of stable micelles were determined by using Dynamic …

A Highly Conductive, Flexible, And 3d-Printable Carbon Nanotube-Elastomer Ink For Additive Bio-Manufacturing, Andy Shar, Phillip Glass, Daeha Joung Ph.D.

Undergraduate Research Posters

The synthesis of a highly conductive, flexible, 3D-printable, and biocompatible ink has been of great interest in the field of bio-based additive manufacturing. Various applications include ultra-sensitive, microscale tactile sensors, patient-customizable scaffolds for cardiac and nerve tissue regeneration, and flexible electrocardiogram (ECG) electrodes. Here, a novel elastomeric carbon nanocomposite is presented consisting of amino-functionalized carbon nanotubes (CNT-NH₂) homogenously dispersed in a one-part room-temperature vulcanizing (RTV) silicone matrix. The use of acetone as a swelling solvent aids in electrical percolation through the elastomer matrix. CNT-NH₂ ratios can be tuned to fit various needs; higher tensile strength is favored …

Investigation Of Intramolecular And Intermolecular Aza-Michael Reactions, Nadia Z. Singleton

College of Graduate Studies: Theses & Dissertations

The hydroamination of dimaleimides with diamines has been accomplished to access novel polymers. Various dimaleamides and dimaleimides were synthesized from commercially available diamines and maleic anhydride. The resulting dimaleamides were then ring-closed to their respective dimaleimides either directly in the presence of acid or via the synthesis of mixed amide-esters which then ring close in the presence of acid under heat. Hydroamination of the dimaleimides with piperazine was accomplished in bulk at room temperature. The reaction is spontaneous thus leading to the formation of polyimides with high functional group conversion within minutes. The kinetics of the maleamides and maleimides was …

Synthesis And Characterization Of Pyridine-Based Diimide Ligands And Metal Phosphonate Coordination Polymers, Juan L. Pinedo

Honors Program Theses and Research Projects

Coordination polymers have been a topic of interest because of the large variety of applications these materials have. in particular Metal-Organic Frameworks (MOFs) have been researched due to their porosity and simple synthetic pathways. Structurally a MOF is composed of one or more organic ligands serving as the backbone of the structure. These ligands are complexed with metal ions coordinating into the desired structure. It is this structure that gives way to a variable porosity useful for proton conductivity and material transport. By varying backbone size a framework can be customized for use in specific conditions. This is due not …

Controlling Degradation With Force And Light, Brad Davis

Dissertations

Stimuli-responsive polymers respond to changes in their environment by altering their physical and chemical properties. Their responsiveness allows them to be used as sensors, mechanical actuators, delivery systems, and can yield either elongated lifetimes through healing mechanisms or shortened lifetimes through triggered degradation. Still a growing field in polymer science, researchers seek to expand the capabilities of these materials by improving their specificity, range, and mechanisms of both the stimuli and the response. The work presented explores stimuli-responsive materials, focusing on mechanical and light stimuli, and how to gain control of the response by specific changes in the polymeric material. …

Enhanced Platinum (Ii) Drug Delivery For Anti-Cancer Therapy, Marek T. Wlodarczyk

Dissertations, Theses, and Capstone Projects

Over the years, anti-cancer therapies have improved the overall survival rate of patients. Nevertheless, the traditional free drug therapies still suffer from side effects and systemic toxicity, resulting in low drug dosages in the clinic. This often leads to suboptimal drug concentrations reaching cancer cells, contributing to treatment failure and drug resistance. Among available anti-cancer therapies, metallodrugs are of great interest. Platinum (II)-based agents are highly potent and are used to treat many cancers, including ovarian cancer (OC). Cisplatin (cis-diaminedichloroplatinum (II)) is the first Food and Drug Administration (FDA)-approved metallodrug for treatment of solid tumors, and its mechanism …

Tools And Strategies For The Patterning Of Bioactive Molecules And Macromolecules, Daniel J. Valles

Dissertations, Theses, and Capstone Projects

Hypersurface Photolithography (HP) is a printing method for fabricating structures and patterns composed of soft materials bound to solid surfaces and with ~1 micrometer resolution in the x, y, and z dimensions. This platform leverages benign, low intensity light to perform photochemical surface reactions with spatial and temporal control of irradiation, and, as a result, is particularly useful for patterning delicate organic and biological material. In particular, surface- initiated controlled radical polymerizations can be leveraged to create arbitrary polymer and block- copolymer brush patterns. Chapter 1 will review the advances in instrumentation architectures from our group that have made these …

Doping Of Conjugated Polymers: Preparation, Characterization And Device Fabrication, Kan Tang

Dissertations

Semiconducting conjugated polymers (CPs) as emerging materials for advanced electronic applications such as sensors, OPVs, and OEFTs has become an intriguing research topic in the past decades. It opens a new avenue of “flexible” electronics, which has shown great potential in next-generation electronic devices.

However, due to the nature of CP materials and related solution processing techniques, unlike almost perfectly crystalline silicon materials, CPs in the solid-state often exhibit much lower crystallinity if it is not complete amorphous, which severely hinder the electronic property and optical property of the materials. The crystallinity of CPs in a film is often uniquely …

Synthesis Of The Diazonium Zwitterionic Polymer/Monomer For Use As The Electrolyte In Polymer Electrolyte Membrane (Pem) Fuel Cells, Josiah Marshall

Electronic Theses and Dissertations

My research goals are to synthesize new zwitterionic perfluorosulfonimide (PFSI) monomer/polymers. They are expected to replace traditionally used perfluorosulfonic acid (PFSA) polymers as the electrolyte in PEM fuel cells. For the PFSI monomer preparation, we designed a nine-step synthesis route. Thus far, I have successfully completed the synthesis of 4- (2-bromotetrafluoroethoxy)-benzenesulfonyl amide, 4-acetoxybenzenesulfonic acid sodium salt, and 4-chlorosulfonyl phenyl acetate. The coupling reaction of 4-(2-bromotetrafluoroethoxy)- benzenesulfonyl amide with 4-chlorosulfonyl phenyl acetate, was troublesome due to slow reaction kinetics and byproducts. Additionally, I did a methodology study for the homopolymerziation of the perfluoro 3(oxapent-4-ene) sulfonyl fluoride monomer. We compared the weight …

Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent, Bulbul Ahmed

LSU Master's Theses

Hemp is considered as one of the sustainable agricultural fiber materials. Degumming or surface modification of hemp bast is needed to produce single fibers for ensuing textile and industrial applications. The traditional degumming process necessitates a high amount of alkali, which causes detrimental environmental pollution. This study offers a new method to degum hemp fibers with reduced use of harmful alkali and precious water resources. In this work, hemp bast fibers were degummed by using combined microwave energy and deep eutectic solvent (DES). The properties of hemp fibers manufactured by this method were investigated and compared with the traditional alkali …

Design Of Antioxidant Monomer, Augustine Osilamah Yusuf

Masters Theses & Specialist Projects

Reactive oxygen species such as hydrogen peroxide are present at the sites of inflammation in the body. Degradable polymeric nanoparticles have shown great promise in a range of biomedical applications which include preferential delivery of therapeutics to such inflamed sites. We are working towards a new class of materials expected to have tunable degradation rates in the presence of hydrogen peroxide. These new materials consist of three parts: degradable linkages, antioxidant groups, and unreactive filler monomers such as methylmethacrylate. We have synthesized a polymerization initiator with a degradable linkage, and we have shown that using this initiator to synthesize another …

Harnessing Surface Chemistry And Instabilities In Silicone Elastomers To Synthesize Adaptive Systems With Mechanically Tunable Surface Properties And Functionality, Ali Jamal Mazaltarim

Department of Chemistry: Dissertations, Theses, and Student Research

Material interfaces are of critical importance to numerous fields, including nanomaterials, electronics, microfluidics, synthesis, bioanalysis, pharmaceuticals, and catalysis, and they have been extensively researched. The materials used in these fields are often rigid/hard (such as silicon wafers) resulting in static surface properties. Consequently, the chemical/morphological properties of a surface may be modified using synthetic or mechanical means to tailor the interfacial properties of a material (i.e., surface energy, adhesion, topography, and reactivity). Recently, emphasis has been placed on designing dynamic materials with adaptive interfacial properties that respond to a variety of environmental stimuli. To this end, the surface chemistry and …

The Effect Of Reaction Conditions On The Nucleation And Particle Growth Of A Colloidal Covalent Organic Framework, Brendan Posson

Master's Theses

Covalent organic frameworks (COFs) are a novel class of crystalline materials with regular porosity, high specific surface area, and various linkage chemistries. Conventional chemical syntheses of these materials lead to the formation of bulk powders characterized as polycrystalline aggregates. Synthesizing these materials as colloidal systems is an effective means to prevent aggregation and achieve larger single-crystalline domain sizes. In this thesis, I describe the effect of temperature and transimination catalyst strength on COF particle nucleation and particle growth. Morphology and crystallinity of the COF-300 particles were confirmed using X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The onset of colloidal …

Synthesis And Self-Assembly Of Amphiphilic Block Copolymers For The Fabrication Of Non-Spherical Polymersomes, Tamuka Chidanguro

Dissertations

Polymersomes, also known as polymer vesicles, have gained a lot of interest over the past two decades. These hollow spherical systems are made via the self-assembly of amphiphilic block copolymers and have found use in a range of areas from drug delivery, to cellular models, to nanoreactors. Their hollow nature allows them to carry hydrophilic cargo in their inner compartment and hydrophobic cargo in their membrane. Over the last decade, increasing efforts have focused on controlling the morphology of polymersomes. Research has shown that polymersome morphology plays an important role for instance in drug delivery, where tubular or rod-like vesicles …

Atomic Oxygen Resistant Low Earth Orbit Stable Polymer Matrix Composites Employing Phenylphosphine Oxide Epoxy-Amines, Witold Fuchs

Dissertations

Atomic oxygen (AO) attacks polymer matrix composites (PMC’s) on the surfaces of spacecraft in low earth orbit (LEO) and threatens safe spacecraft operation and service life. Incorporating phenylphosphine oxide (PPO) groups into polymer chains offers a self-regenerating method of protection from AO but remains poorly understood. Herein, epoxies containing PPO groups were synthesized with increasing concentrations of phosphorus [P] from 0 to 8 wt % to investigate their AO resistance. Measurements confirmed the exposure of these materials to AO produces a passivation phosphate (POx) layer on the surface of the sample and the efficacy of the resultant layer was directly …

Development Of Biomaterials For Drug Delivery, Raquel De Castro

Graduate Theses and Dissertations

Drug delivery systems (DDS) have highly evolved in the last decades with the development of hydrogels and nanoparticles. However, high systemic uptake, side effects, low bioavailability, and encapsulation efficiency continue to be a major hurdle faced by such DDSs.

Nanoparticles and hydrogels can be specifically designed for targeted DDSs to mitigate some of the problems. This dissertation aimed to design two DDSs for ocular drug delivery and one for cancer treatment. The first project sought to develop chitosan nanoparticles (Cs-NP) using PEGDA as a copolymer to encapsulate gentamicin (GtS) for ocular drug delivery. Cs-NPs contain positive charges that can interact …

Thermal, Mechanical, And Rehealing Properties Of Cross-Linked Ionene Networks, Katelyn Lindenmeyer

Honors College Theses

Polymers which contain ionic liquid groups have numerous applications in a wide variety of fields. Past research from our group has shown that IL-containing polymers which exist in covalently crosslinked networks can exhibit good ionic conductivities despite the hindrance in polymer chain mobility and relaxation. In part one of this thesis, efforts to create ionic networks which have the capability of being rehealed after exposure to an external stimulus are discussed. Thermoreversible maleimide-furan chemistry was incorporated into an imidazolium-containing ionene network. Maleimide-terminated, imidazolium-containing monomers were coupled with furan-functionalized monomers, prepared from commercially available multifunctional acrylates. Thermal, mechanical and rheological characterization …

Development Of Engineered Soil Surrogates For Modeling Natural Soil Sorption Behavior, Ghada Yehia Abdalla

LSU Doctoral Dissertations

The land produces more than 95% of the global food supply, and with a continuously growing population, we need to optimize the use of the available agricultural land. Soil organic matter (SOM) is an essential component of soils, especially concerning their fertility and sorption behavior. The chemical composition of the SOM consists of lipids, lignin, and cellulose. However, the heterogeneous and complex nature of SOM, and real soils, makes their study challenging and introduces uncontrollable factors.

Therefore, structural mimics of natural soils with increasing complexity representing the real soil functionality were synthesized and evaluated for bulk properties related to their …

Polyesters With Main And Side Chain Phosphoesters As Structural Motives For Biocompatible Electrospun Fibres, André E. Polloni, Viviane Chiaradia, Ronaldo José F.C. Do Amaral, Cathal Kearney, Brian Gorey, Débora De Oliveira, José V. De Oliveira, Pedro H.H. De Araújo, Claudia Sayer, Andreas Heise

Articles

Phosphoester containing polymers are promising materials in biomedical applications due to their biocompatibility and biodegradability. Utilising thiol-ene chemistry, the synthesis of two novel structural polymer motives combining polyesters and phophoester groups was explored. The first polymer was obtained by coupling ene-functional poly(thioether-phosphoester) with thiol functional poly(pentadecalactone). While the coupling reaction was successful, yields remained low presumably due to inadequate endgroup stoichiometry. The second polymer comprised phosphoester side groups conjugated to unsaturated poly(globalide). Double bond conversions up to 84% were achieved depending of the type of phosphoester thiol and relative reactant ratios. The resulting polymers transitioned from solid semicrystaline to liquid …

Recently Developed Carbohydrate Based Gelators And Their Applications, Joedian Morris, Jonathan Bietsch, Kristen Bashaw, Guijun Wang

Chemistry & Biochemistry Faculty Publications

Carbohydrate based low molecular weight gelators have been an intense subject of study over the past decade. The self-assembling systems built from natural products have high significance as biocompatible materials and renewable resources. The versatile structures available from naturally existing monosaccharides have enriched the molecular libraries that can be used for the construction of gelators. The bottom-up strategy in designing low molecular weight gelators (LMWGs) for a variety of applications has been adopted by many researchers. Rational design, along with some serendipitous discoveries, has resulted in multiple classes of molecular gelators. This review covers the literature from 2017-2020 on monosaccharide …

Multi-Level Analysis Of Atomic Layer Deposition Barrier Coatings On Additively Manufactured Plastics For High Vacuum Applications, Nupur Bihari

Dissertations, Master's Theses and Master's Reports

While hardware innovations in micro/nano electronics and photonics are heavily patented, the rise of the open-source movement has significantly shifted focus to the importance of obtaining low-cost, functional and easily modifiable research equipment. This thesis provides a foundation of open source development of equipment to aid in the micro/nano electronics and photonics fields.

First, the massive acceptance of the open source Arduino microcontroller has aided in the development of control systems with a wide variety of uses. Here it is used for the development of an open-source dual axis gimbal system. This system is used to characterize optoelectronic properties of …

Molecular Recognition Of Pet Depolymerization Products And Beta-Cyclodextrin, Thomas Palisin

Williams Honors College, Honors Research Projects

Using molecular recognition techniques to determine the binding constant of the host-guest relationships of the depolymerization products of polyethylene terephthalate (PET) and cyclodextrin species. The main method of data collection used was florescence spectroscopy. Using a titration method and measuring the florescence intensity, a nonlinear regression was used to determine the binding constant.

Valorization Of Xylan In Agroforestry Waste Streams, Harrison Appiah

Graduate Theses, Dissertations, and Problem Reports (ETD)

Valorization of Xylan in Agroforestry Waste Streams.

Harrison Appiah

Microwave-assisted deep eutectic solvent and gamma-valerolactone metallic chloride catalyzed conversion of xylan to furfural were investigated using a 2x3 factorial experimental design at two levels of percent microwave power, reaction time, and catalyst concentration. The levels of each factor studied were (20%, 60% microwave power, 2, 4 minutes, and 10, 20mg) respectively. The effect of three metallic chloride catalysts (LiCl, FeCl3.6H20, CuCl2) on the conversion of xylan to furfural was also investigated. The gamma-valerolactone-ferric chloride sent system exhibited the highest mean yield of furfural (56.50%). The next highest furfural yield of …