Polymer Chemistry Commons^™

In Depth Characterisation Of The Biomolecular Coronas Of Polymer Coated Inorganic Nanoparticles With Differential Centrifugal Sedimentation, André Perez-Potti, Hender Lopez, Beatriz Pelaz, Abuelmagd Abdelmonem, Mahmoud G. Soliman, Ingmar Schoen, Philip M. Kelly, Kenneth A. Dawson, Wolfgang J. Parak, Zeljka Krpetic, Marco P. Monopoli

Articles

Advances in nanofabrication methods have enabled the tailoring of new strategies towards the controlled production of nanoparticles with attractive applications in healthcare. In many cases, their characterisation remains a big challenge, particularly for small-sized functional nanoparticles of 5 nm diameter or smaller, where current particle sizing techniques struggle to provide the required sensitivity and accuracy. There is a clear need for the development of new reliable characterisation approaches for the physico-chemical characterisation of nanoparticles with significant accuracy, particularly for the analysis of the particles in the presence of complex biological fluids. Herein, we show that the Differential Centrifugal Sedimentation can …

Atom Transfer Radical Processes: From Catalyst Design To Polymer Synthesis, Characterization, And Application, Michael Novak

Electronic Theses and Dissertations

Due to the toxicity of heavy metals and their prevalence in the environment there exists a need to develop highly active transition metal catalysts ultimately reducing the amount needed for chemical transformations. Additionally, there is interest in the scientific community for creating new materials that can remove these pollutants from industrial wastewater prior to its release into the environment. The work presented here focuses on the reduction and removal of heavy metals from industrial hazardous waste by designing novel highly active catalysts and developing polymeric adsorbents.

Highly active catalyst complexes consisting of novel hybrid ligands, 2-(dimethylamino)ethyl-bis-[2-(pyridylmethyl)amine] (M1-T2), and bis[2-(dimethylamino)ethyl]-2-(pyridylmethyl)amine (M2-T1), …

Control Of Corrosion On Ss316l Using Surface Initiated Polymers, Alexander Rupprecht

Electronic Theses and Dissertations

Pitting corrosion is arguably one of the most destructive and dangerous forms of corrosion, resulting in damage to structures, the environment, and public health. In addition, damage caused to structures such as bridges, pipelines, and boats, corrosion also has a profound effect on the biomedical community. Implanted metallic devices (i.e., vascular stents and artificial joints) are prone to pitting corrosion caused by aggressive ions present in extracellular fluid. To provide a corrosion-resistant surface on SS316L, films of poly(styrene), poly(methyl acrylate), and poly(methyl methacrylate) were formed using surface-initiated atom transfer radical polymerization (SI-ATRP). The resulting hydrophobic polymer films had a fractional …

Practical Adhesion Measurements In Organic Coatings; Advancing Understanding And Mechanical Methods Development, Diana Gottschalk

Dissertations

“Adhesion” can be considered either a mechanical or chemical phenomenon. The mechanical interpretation describes the difficulty of separating surfaces and is useful for quantifying performance within applications that depend on bulk and interfacial properties. Chemical adhesion describes interfacial resistance to chemical attack and does not depend on bulk properties. Predicting chemical failure through mechanical measurement is confounded by the influence of bulk properties. However, the prospect is attractive because of the robust tolerance for sample geometries, allowing experiments to resemble an end-use system. The present work's primary goal was to elevate mechanical methods to provide a detailed interfacial characterization of …

Structure And Dynamics Of Phospholipid Vesicles And The Dependence On Nanoscale Interactions With Molecules Of Varying Complexity, Lakshapathy Widanelage Judith Upeka De Mel

LSU Doctoral Dissertations

In this dissertation, molecular interactions and changes imposed by nano-scale structures on phospholipid vesicles were investigated. 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) large unilamellar vesicles (LUVs) were used as the model system. Understanding changes of the bilayer structure, interfacial properties, lipid dynamics, and self-assembly, allows bridging relationships between biological cell membrane structure and dynamics to cellular functionalities. For example, membrane curvature changes are linked to membrane protein functions, although the exact mechanisms of control are not yet understood. Moreover, the knowledge gained from vesicle models allows exploring novel strategies for drug delivery applications. To achieve this, DOPC LUVs were synthesized and characterized by a …

Synthesis And Characterization Of Water-Soluble Polyaniline For Hydrazine Detection / Hazira Hussin, Hazira Hussin

Student Works (2020-2029)

In this study, polyaniline (PAni) was synthesized through the chemical oxidation method using aniline (Ani) as a monomer, hydrochloric acid (HCl) as a dopant, and ammonium persulphate (APS) as an initiator. PAni was rendered water soluble through treating with cellulose derivatives. Cellulose derivatives such as methylcellulose (MC), hydroxypropyl cellulose (HPC), and hydroxypropyl methylcellulose (HPMC) were used as a stabilizer to improve the solubility of PAni in an aqueous medium. The water-soluble PAni-cellulose derivative was applied as a chemical sensor for hydrazine detection. The chemical structures and electrical conducting behaviours of PAni-cellulose derivatives were investigated using Fourier transform infrared (FTIR) and …

Peo-Ppo-Peo Surfactant Mixtures As Templates For Silicas With Very Large Cylindrical Mesopores At Ambient Temperature And With Helical Mesopores At Sub-Ambient Temperature, Laurance Beaton

Dissertations, Theses, and Capstone Projects

The original research described herein concerns the synthesis of mesoporous silicas through a surfactant-templating method. The approach taken involved the use of a mixed surfactant system of two poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) surfactants, with one of the copolymers containing a much larger percentage of hydrophobic (PPO) blocks than the employed co-surfactant. Systematic adjustments of experimental parameters initially enabled the preparation of 2-D hexagonally ordered mesoporous silicas (SBA-15) of uncommonly large pore diameter at ambient temperature. Comparable silica was synthesized with and without temperature control. Additional adjustments to experimental parameters, including reduction of the relative amount of framework precursor used in …

Pressure Driven Desalination Utilizing Nanomaterials, Fangyou Xie

Master's Theses

Nanomaterials such as graphene oxide and carbon nanotubes, have demonstrated excellent properties for membrane desalination, including decrease of maintenance, increase of flux rate, simple solution casting, and impressive chemical inertness. Here, two projects are studied to investigate nanocarbon based membrane desalination. The first project is to prepare hybrid membranes with amyloid fibrils intercalated with graphene oxide sheets. The addition of protein amyloid fibrils expands the interlayer spacing between graphene oxide nanosheets and introduces additional functional groups in the diffusion pathways, resulting in increase of flux rate and rejection rate for the organic dyes. Amyloid fibrils also provide structural assistance to …

Synthesis Of Polyaniline Modified With Palm Oil Based Alkyd As Counter Electrode In Solar Cell Application, Ramli Mariam Fadzlina

Student Works (2020-2029)

Presently, shortage of sustainable and environmental friendly energy resources has become an important global concern. Dye-sensitized solar cell (DSSC) has widely been used as a clean energy conversion device that can solve this problem. Platinum (Pt) has commonly been used as counter electrode (CE) in DSSC due to its good redox property. However, Pt is expensive and could be easily corroded in tri-iodide solution. Recently, polyaniline (PAni) has shown promising performance in DSSC, but PAni exhibit poor adhesion on fluorine-doped tin oxide (FTO) substrate. In this study, an environmental friendly CE was developed by modifying PAni using titanium dioxide (TiO2) …

Development Of Plasticized Methylcellulosepotato Starch Blend Based Polymer Electrolytes For Protonic Cell And Supercapacitor Applications, Hamsan Muhamad Hafiz

Student Works (2020-2029)

In the current work, the preparation of the polymer electrolyte (PE) systems consists of methylcellulose-potato starch polymer matrix, ammonium nitrate (NH4NO3) as ionic source and glycerol as plasticizer are done by solution cast technique. X-ray diffraction (XRD) has shown that blend with 60 wt.% methylcellulose and 40 wt.% potato starch possesses the lowest degree of crystallinity. The possible interactions within the PE are verified using Fourier transform infrared (FTIR) spectroscopy. As the concentration of NH4NO3 is at 30 wt.%, the conductivity is optimized up to (4.37 ± 0.16) × 10-5 S cm-1 and then maximized to (1.26 ± 0.1) × …

Visualization Without Vision – How Blind And Visually Impaired Students And Researchers Engage With Molecular Structures, Croix J. Laconsay, Henry B. Wedler, Dean J. Tantillo

Journal of Science Education for Students with Disabilities

This article examines the tools and techniques currently available that enable blind and visually impaired (BVI) individuals to visualize three-dimensional objects used in learning chemistry concepts. How BVI individuals engage with and visualize molecular structure is discussed and recent tactile (or haptic) and auditory methods for visualization of various chemistry concepts are summarized. Remaining challenges for chemistry education researchers are described with the aim of highlighting the potential value of educational research in further enabling BVI students to pursue careers in science, technology, engineering, and mathematics (STEM) fields.

Altering An Epoxy-Amine Thermoset's Performance Through Varying Mix Ratios, Kiersten M. Smith

Master's Theses

Epoxy resins are used in a number of different industries and therefore have application-specific material requirements, from satellites that require materials that operate in space, to paints and coatings that require high scratch resistance and mechanical durability, to medical devices, designed to be in continuous contact with biological fluids. Commercial epoxy products come with manufacturer’s information explaining the epoxy properties and recommended preparation processing conditions, which may include epoxy resin to curing agent mix ratio (Part A : Part B), cure time, and cure temperature, for example. Due to proprietary reasons, it can be difficult to understand why these values …

I. Non-Degradable Polysiloxane Networks For Controlled Release Applications, And Ii. Additive Free, Degradable Silyl-Ether Furyl-Maleimide Networks, Caleb M. Bunton

Chemistry Theses and Dissertations

I. Two different series of non–degradable polysiloxane networks were prepared for the encapsulation and controlled release of a small molecule agent. For the first series, hydrosilylation was utilized to prepare networks of varying crosslink densities, as determined from swelling studies, from vinyl terminated and silylhydride functional poly(dimethyl)siloxanes. For the second series, the thiol-ene reaction was utilized to prepare networks of varying crosslink densities, as determined from swelling studies, from vinyl terminated and mercaptopropyl functional poly(dimethyl)siloxanes. Nile red dye was used as an encapsulated agent and dye release from each series of networks was measured using UV–vis spectroscopy to determine controllability …

Effect Of Post-Consumer Content And Bioplastic Incorporation On Polymeric Resin In Consumer Applications, Shelby Bicknell

Electronic Theses & Dissertations

Controversy surrounds the use of plastic products, primarily due to their potentially negative impact on the environment at the end of their lifecycle. The most widely used plastics are manufactured from petrochemicals such as petroleum, coal or natural gas. Petrochemical plastics are not able to readily breakdown in the environment, which aggravates the existing pollution problems. Fortunately, there are eco-friendly alternatives to petrochemical-based plastics. Bioplastics may be derived from renewable sources, biodegradable, or both. Bio-based plastics are plastics that may be derived from renewable biomass sources including, but not limited to, vegetable oils, cornstarch, straw, woodchips, and food waste. They …

Fabrication Of Polymer Monoliths Within The Confines Of Non-Transparent 3d-Printed Polymer Housings, Noor Abdulhussain, Suhas H. Nawada, Sinéad Currivan, Marta Passamonti, Peter J. Schoenmakers

Articles

In the last decade, 3D-printing has emerged as a promising enabling technology in the field of analytical chemistry. Fused-deposition modelling (FDM) is a popular, low-cost and widely accessible technique. In this study, RPLC separations are achieved by in-situ fabrication of porous polymer monoliths, directly within the 3D-printed channels. Thermal polymerization was employed for the fabrication of monolithic columns in optically non-transparent column housings, 3D-printed using two different polypropylene materials. Both acrylate-based and polystyrene-based monoliths were created. Two approaches were used for monolith fabrication, viz. (i) in standard polypropylene (PP) a two-step process was developed, with a radical initiated wall-modification step …

An Atomistic Study Of The Effects On Mechanical Properties And Bonding Interactions Of Carbon Nanofillers In Nylon 6 Nanocomposites, Michael Roth

Dissertations

Polymers have potential for a wide range of applications. The effectiveness of polymers can be further enhanced through the addition of nanofillers that improve thermal, mechanical, and electrical properties of the polymer. Carbon based nanofillers such as carbon nanotube (CNT), graphene, and carbon nanofibre (CNF) are of particular interest due to their high properties and high aspect ratios. However, limited understanding of the governing interactions of these nanofillers with polymers limits the effectiveness of the final nanocomposite.

The first facet of this dissertation focuses on determining the dominating interactions between pristine CNT and graphene with nylon 6 monomer and the …

Mesoporous Adsorbents For Perfluorinated Compounds, Bertha Lotsi

Electronic Theses and Dissertations

Effective adsorbents for polyfluorinated compounds (PFCs) were successfully prepared. And they were tested in the adsorption of perfluorooctanoic and perfluorooctanesulfonic acids. Bridged silsesquioxanes containing secondary and tertiary amino groups were synthesized by sol-gel condensation of bis[3-(trimethoxysilyl)propyl]amine and bis[3-(methylamino)propyl]-trimethoxysilane in acidic media with surfactants. Obtained materials are mesoporous with a high BET surface area. They combine high structural stability with a high concentration of surface amino groups serving as adsorption sites. Batch adsorption tests demonstrated their extremely high adsorption capacity on PFCs: in some experiments, it reached up to 88% of the adsorbent weight. Adsorption of PFCs changed the surfaces of …

The Synthesis Of Urethane Acrylate Resin From Palm Fatty Acid Distillate And Some Mechanical Properties, Kim Teck Teo

Student Works (2020-2029)

Depletion of petroleum reserves and increasing environmental concerns have stimulated the efforts to explore materials from readily available, renewable natural resources, such as carbohydrates, oils, fats and proteins. Plant oil and its fatty acids are promising renewable resources to produce environmentally friendly polymeric materials. Palm oil is a major crop in Malaysia and consequently palm fatty acid distillate (PFAD) has been an abundant by-product during the refinery process. PFAD could be a renewable raw material for industrial application. Thus, we develop new PFAD-based acrylate resins UV curable for coatings applications. The resins could be produced by two approaches. Firstly, mixtures …

A Proposed Mechanism To Induce Multi-Layer Polydiacetylene-Coated Filter Color Response To Bacteria , Timothy Hanks

Chemistry Publications

The purpose of this study was to develop a multi-layer diacetylene (PDA)-coated filter and to verify the proposed color response mechanism of PDA-coated filters to bacteria. Unlike other reports which immobilize PDA lipo- somes on solid support or create monolayer Langmuir films, multi-layer PDA-coated filters were generated by directly evaporating organic solvents. Different from incorporating functional headgroups or inserting phospho- lipids into PDA, we reported that bacterial growth can trigger the color change of PDA sensors without any mod- ification or phospholipid insertion. The mechanism that pH change from bacteria metabolites lead to color change of PDA filter was proposed …

Redox-Active Porous Organic Materials For Electrochemical Energy Storage Applications, K. Shamara Weeraratne

Theses and Dissertations

As the demand for renewable energy technologies grows, so does the need for cheaper, more efficient rechargeable batteries to store the energy. While lithium-ion battery (LIBs) technology is well established, it suffers from limited lithium supplies. Furthermore, the highly toxic transition metals used in the electrodes places a huge burden on the environment. Therefore, replacing lithium with more economical sodium metal in rechargeable batteries (i.e. sodium-ion batteries, SIBs) has garnered considerable attention. Despite the fact that sodium and lithium share similar electrochemical properties, which may cause the transition from lithium to sodium easier, the larger ionic radius of Na^{+ …}

Gravity-Drawing Flexible Silicone Filaments As Fiber Optics And Model Foldamers, Katherine Snell

CMC Senior Theses

Here, we present a method of gravity-drawing polydimethylsiloxane (PDMS) silicone fibers with application as fiber optics and as model foldamers. Beginning as a viscous liquid, PDMS is cured using heat until its measured viscosity reaches 4000 mPa•s. The semi-cured elastomer is then extruded through a tube furnace to produce thin (diameters on the order of hundred micrometers) filaments with scalable lengths. PDMS is biocompatible, gas-permeable, flexible, and hydrophobic. Additionally, the PDMS surface hydrophobicity can be modified via UV exposure, O2 plasma, and corona discharge. We demonstrate the patternibility (i.e patterns of hydrophobicity) of PDMS fibers, adding complexity to potential foldamer …

Design Of Pigments For Use In “Cool” Coatings, Tyler Laughorn

Williams Honors College, Honors Research Projects

This project was focused on the development and testing of several novel pigments that exhibit high NIR-reflectance and therefore show potential for use in “cool” coatings. A “cool” coating will reflect more solar radiation than other standard coatings, and so a coated structure would require less energy to keep cool. Four sets of pigments were synthesized: Co_1-xMg_xCr₂O₄ (teal), Co_0.25Mg_0.75Cr_2-yAl_yO₄ (blue), Ti_1-x-yNi_xSb_yO₂ (yellow), and Cr_2-xFe_xO₃ (black). NIR and TSR values were then measured …

Filtration Apparatus Design For Oil-Water Separation Using Membranes And Sponges, Alec Jerger

Williams Honors College, Honors Research Projects

It can be difficult to separate water and oil emulsions through traditional filtration. Therefore, investigations of filtering using thermo-responsive (TR) polymers, in this case poly(vinyl methyl ether) (PVME), was conducted. It’s hypothesized that below its lower critical solution temperature (LCST), PVME has an affinity for water while oil substances do not. Above the LCST the opposite will be true. To verify this hypothesis, iterations of filtration designs were created to provide optimum control over the parameters to measure flow. The final optimized experimental apparatus was a Chromaflex glass column which was air tight and controlled all parameters besides fluid flow. …

Hypervalent Iodine Compounds With Carboxylate And Tetrazolate Ligands, Avichal Vaish

Chemistry Theses and Dissertations

In modern organic chemistry, hypervalent (HV) iodine(III) compounds are frequently used as oxidizing agents but application of λ³-iodanes in polymer and material chemistry is still underexplored. This dissertation describes the preparation of dynamic and self-healing materials by employing ligand exchange reactions involving HV iodine(III) compounds of the type ArIL₂ (Ar = Aryl, L = ligand, e.g., carboxylate or (pseudo)halide). These compounds can undergo ligand exchange reactions in presence of nucleophiles (Nu^-) to form ArINu₂. Diacetoxyiodo benzene was successfully employed as a crosslinker to prepare dynamic and self-healing gels derived from carboxylate-containing polymers. Furthermore, …

Polyarylenes: Synthesis And Characterization Towards Advanced Applications, Stephen Budy

Chemistry Theses and Dissertations

A series of semi-fluorinated and non-fluorinated Diels−Alder step-growth polyarylene polymers and co-polymers were synthesized via typical oil bath heating (days/weeks) and more rapid microwave-assisted polymerization (hours). The polymers were characterized by multi-nuclear (¹H, ¹³C, and ¹⁹F) NMR and ATR−FTIR spectroscopy, thermal analysis (TGA, DSC, and DMA), GPC, XRD, water contact analysis (WCA), and refractive index (RI) measurements. The NMR spectra indicated a mixture of para and meta conformations through the polymer backbone increasing to more para with greater fluorine content. Thermal gravimetric analysis revealed the fluorine-containing polyarylenes possessed the highest char yields at almost 80% at …

Synthesis And Characterization Of Multifunctional Transition Metal Oxide Nanoparticles Through A Modified Sol-Gel Method With Application In Energy Storage, Julien Lombardi

Dissertations, Theses, and Capstone Projects

The Synthesis of transition metal oxide nanoparticles has been studied in great detail over the many years. The most studied transition metal oxide nanoparticles are perovskites of the ABO₃ stoichiometry (A and B = transition metal) and more recently double perovskite crystal structures of the AA’BO₆ or A₂BB’O₆ stoichiometry due to the many different properties arising from the many different combinations of elements possible. These materials have proven potentially useful in many fields, but due to properties such as ferroelectricity and ferromagnetism, the desire to integrate these materials into electronics is ever growing. Many synthesis …

Organic-Inorganic Hybrid Composites: Superhydrophobic Polymer Coatings With Photoreactive Perfluorinated Phthalocyanines, Abdul Azeez

Seton Hall University Dissertations and Theses (ETDs)

ABSTRACT

We report partly fluorinated and silicon-based polymers that incorporate inorganic/organic materials capable of generating reactive oxygen species (ROS) using only visible light and air. Polyvinylidene fluoride (PVDF), which incorporated a known perfluorinated phthalocyanine photosensitizer, F₆₄PcZn, supported on silicon and titanium oxides was further modified via chemical surface roughening to exhibit enhanced hydrophobicity when used as a coating. Water contact angles as high as ~159° have been observed, vs. ~ 92° for the unmodified polymer. The polymer matrix, however, does not resist the ROS it produces as evidenced by spectroscopic and SEM data. A polysiloxane matrix was similarly …

Photoswitchable Self-Complementary Hydrogen Bond Arrays, Suendues Noori, James A. Wisner

Western Research Forum

Background: Photochromism is the reversible transformation of a chemical material to another form by the absorption of electromagnetic radiation (light), where the two metastable forms have distinct absorption spectra and other properties. Photochromism in materials allows for the switching of their function solely based on irradiation with light. Polymers are used frequently as the building blocks for materials as they are versatile, multifunctional, can carry charge and be processed by solution-based deposition methods. Supramolecular polymers share the same definition as polymers with the exception that they are held together by reversible and directional non-covalent interactions such as hydrogen bonds. Synthesizing …

Implementation Of Multivariate Artificial Neural Networks Coupled With Genetic Algorithms For The Multi-Objective Property Prediction And Optimization Of Emulsion Polymers, David Chisholm

Master's Theses

Machine learning has been gaining popularity over the past few decades as computers have become more advanced. On a fundamental level, machine learning consists of the use of computerized statistical methods to analyze data and discover trends that may not have been obvious or otherwise observable previously. These trends can then be used to make predictions on new data and explore entirely new design spaces. Methods vary from simple linear regression to highly complex neural networks, but the end goal is similar. The application of these methods to material property prediction and new material discovery has been of high interest …

Rheological Investigations Of Latex-Surfactant-Associative Thickener Aqueous Systems, Bishop I. Hammack

Master's Theses

Surfactants and Thickeners are both additives used in fully-formulated waterborne coatings to provide colloidal stability, thickening, and other functionality. The behavior of each ingredient in a coating must be understood and controlled to maintain colloidal stability as well as balance other desired properties of the liquid coating and the dry paint film. In this work, quaternary systems of Water-Latex-Thickener-Surfactant were investigated to further the understanding of their behavior in coatings. The thickener used was a well characterized, hydrophobically-modified, ethoxylated urethane (HEUR) with two C18 terminal hydrophobes and 795 average repeat units of ethylene oxide as the hydrophilic spacer. Two latexes, …