Polymer Chemistry Commons^™

Synthesizing Viscoelasticity: Living Polymers, Micro-Macro Relations, And Paths For Resolution, Adam M. Hasler

Graduate Masters Theses

This thesis investigates the relationship between macroscopic rheological signals and underlying microscopic dynamics in complex fluids, specifically focusing on ”living polymers” within the cetyltrimethylammonium bromide (CTAB) and sodium salicylate (NaSal) surfactant system. The research addresses the inverse parameterization problem, demonstrating how bulk measurements like zero-shear viscosity can mask fundamentally different physical topologies, such as purely cylindrical, reptating micelles versus highly branched networks. Through the successful synthesis of viscoelastically ”degenerate” samples, the study utilizes an array of characterization techniques including frequency sweeps, Large Amplitude Oscillatory Shear (LAOS) to resolve these unique underlying states. Furthermore, the work explores further avenues of study …

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

Tuning Ion Mobility And Molecular Confinement In High-Performance Polymer Electrolytes For Energy Storage, Ezzeldien Yousef Muhammed Yousef

Theses and Dissertations

This research addresses the critical energy density limitations of aqueous supercapacitors, which are traditionally constrained by the narrow electrochemical stability window (ESW) of water 1.23 V. By employing two distinct molecular engineering strategies, this study developed high-performance electrolyte systems that significantly extend voltage stability and thermal resilience.

The first system, CsBr@PAM/HA, utilizes a polyacrylamide and hyaluronic acid hydrogel matrix. This system exploits the chaotropic nature of Cs⁺ ions to disrupt the aqueous hydrogen-bonding network, enhancing ionic conductivity to 104 mS cm^-1. Through systematic salt screening, CsBr was identified as the optimal electrolyte, enabling a stable 2.0 V …

Thermally Induced Color Changes In Iron Oxide Containing Coatings, Tabatha Whitfield

Master's Theses

Wildland-urban interface (WUI) fires and residential conflagrations present significant challenges for post-fire damage and fire propagation analysis. CAL FIRE observed reddening in architectural coatings during the 2025 Pacific Palisades fire with no determination of the cause. While heat-induced color change of infrastructure coatings has been studied, its potential use as a thermal exposure indicator in residential fire events remains largely unexplored. The objective of this study was to characterize the heat-induced color change of yellow iron oxide containing coatings subjected to thermal exposures, replicating residential fire conditions. The coatings were applied to commonly used building materials and exposed to direct …

Thermally Induced Color Changes In Iron Oxide Pigments Used In Architectural Coatings, Han Diep

Master's Theses

The 2025 Palisades Fire was one of the most destructive wildfires in the history of Los Angeles, destroying thousands of structures and severely impacting the communities after. This widespread destruction demonstrated an urgent need for more effective wildfire prevention strategies. Architectural coatings do not only provide aesthetics and protection against environmental conditions but can also function as a thermal indicator when a fire breaks out. This study examines the thermally induced color transformation of iron oxide pigments, commonly used in earthtone paint, to provide information relevant to CAL FIRE for improved analysis of wildland-urban interface (WUI) fire behavior and mitigation …

Characterization Of The Thermally Driven Red Hue Effect In Coated And Uncoated Concrete Systems: Implications For Post-Fire Assessment In Wildland Urban Interface Communities, Juan C. Palominos Jr

Master's Theses

The increasing frequency and intensity of Wildland-Urban Interface (WUI) wildfires, such as the destructive 2025 Pacific Palisades Fire that destroyed over 6,000 structures, have underscored the urgent need for rapid post-fire safety assessment methodologies. This study sought to quantitatively characterize the Thermally Driven Red Hue Effect (TRHE), a unique, irreversible color shift observed in architectural coatings and concrete substrates, to determine its reliability as a permanent visual record of thermal exposure. Concrete substrates were formulated with three distinct coarse aggregates: gold granite (14.7% Fe), red cinder (22.4% Fe), and green rock (33.6% Fe) and coated with a 20 PVC waterborne …

Adsorption Of Pfas On Bridged Functionalized Organosilica Materials, Elisha Lawerh Kabutey

Electronic Theses and Dissertations

PFAS are hazardous contaminants that have a devastating impact on human health and the environment. Their hazardous nature has led to the development of various adsorption methods for removing these contaminants from water sources. In this study, functionalized organosilica materials were synthesized from bis[3-(trimethoxysilyl)propyl] amine using the sol-gel method. The surface amino groups of the organosilica were converted into amine hydrochloride groups. Their adsorption properties were evaluated using salts of perfluorooctanoic acid, perfluorooctanesulfonic acid, and perfluorobutanesulfonic acid. Results showed excellent adsorption capacity of the materials. Adsorption of PFAS leads to particle agglomeration and flotation of the spent material. A column …

Exploring The Effects Of Polymer-Graphene Interactions On Bulk Composite Properties Using Finite Element Analysis, Bryant Grove

Dissertations

As a filler in high performance materials, graphene significantly enhances the mechanical properties of polymer composites. Experimental characterization of graphene composite enhancements is limited by labor-intensive processes in both synthesizing composites for different purposes and in characterizing the interactions between graphene and polymer composites that lead to these enhancements. Computational approaches such as finite element analysis (FEA) are suitable alternatives that go beyond experimental analysis. This dissertation demonstrates the utility of FEA in analyzing polymer graphene composites with an emphasis on modeling the interaction between graphene fillers and the matrix within the interphase formed between them. The accessible design framework …

Engineering Silicone Magnetic Fluids For Localized Radiation Attenuation During Ocular Melanoma Brachytherapy, Zachary L. Caprow

All Dissertations

Ocular melanoma is commonly treated using plaque brachytherapy; however, radiation-induced damage to healthy ocular tissues frequently results in partial or complete vision loss. This work investigates the development of an injectable, magnetically responsive silicone magnetic fluid designed to localize adjacent to the tumor and attenuate low-energy gamma radiation during treatment.

The material system consists of iron oxide nanoparticles surface-functionalized with a siloxane polymer, in which the nanoparticles provide magnetic responsiveness and radiation attenuation, while the polymer coating ensures colloidal stability, injectability, and biocompatibility. A one-pot synthetic approach was developed wherein a functionalized siloxane polymer containing iron-affinitive groups was reacted with …

Techno-Enviro-Economic Analysis Of Precipitated Calcium Carbonate Production From Carbon Dioxide In Cement Industry Flue Gas And Calcium Hydroxide, Natalia Debora Panggabean, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

CCUS is a technological solution to reduce emissions from the cement industry, which is the second largest CO2-intensive industry. This study aims to analyze technical, economic, and environmental performance of Precipitated Calcium Carbonate (PCC) synthesis in cement industry flue gas. The process simulation includes the CO2 capture system from cement plant, CO2 captured used as feedstock for PCC synthesis process through its reaction with calcium hydroxide. The simulation was carried out using ASPEN Plus software. Technical analysis was performed to determine the CO2 capture efficiency and PCC synthesis efficiency. Economic analysis was conducted to calculate CO2 capture cost and production …

Feasibility Analysis Of Thermal Oxidizer To Determine Remaining Life Using Fitness- For-Service Level 3 Method, Yudhi Yudistirawan, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra, Dewi Kurnia Suci, Agung Putra Mahardhika

Journal of Materials Exploration and Findings

An aged thermal oxidizer (TOX) in the oil and gas industry necessitates a comprehensive evaluation to ensure its continued safe operation. This study presents a Remaining Life Assessment (RLA) and a Fitness for Service (FFS) evaluation for the four main components of the TOX, in accordance with API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div-1 standards. The investigation includes the determination of maximum stress and maximum temperature required to assess the operational viability of the reactor. The four components are radiant, convection, transition, and stack sections—were modeled using the finite element method (FEM). Following the geometric modeling, …

Anthrone-Based Dummy Molecularly Imprinted Polymer For The Selective Detection Of Fluorene And Phenanthrene In Simulated River Water, Aria Pinandita, Nurrahmi Handayani, Muhammad Iqbal, Untung Triadhi, Rusnadi Rusnadi, Samitha Dewi Djajanti, Muhammad Bachri Amran, Muhammad Ali Zulfikar

Makara Journal of Science

A dummy-template molecularly imprinted polymer (DMIP) was synthesized via precipitation polymerization using anthrone as a template analog for the selective analysis of low-molecular-weight polycyclic aromatic hydrocarbons (PAHs), specifically fluorene and phenanthrene. Styrene, benzoyl peroxide, and ethylene glycol dimethacrylate were employed as the functional monomer, radical initiator, and crosslinking agent, respectively. The synthesized polymers were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, and particle size analysis. The imprinting factors were 1.16 and 1.09 for fluorene and phenanthrene, respectively, indicating enhanced affinity of the imprinted sites. High-performance liquid chromatography analysis following DMIP-based solid-phase extraction yielded recoveries of 91.49% ± 3.87% for …

Monosaccharide Binding To Synthetic Carbohydrate Receptor Microarrays, Milan A. Shlain

Dissertations, Theses, and Capstone Projects

Chapter 1: A glycan detection platform comprised of synthetic carbohydrate receptors (SCRs) immobilized onto polymer brushes was prepared. SCR043, an alkene-containing SCR, was incorporated into grafted-from polymer brushes using hypersurface photolithography, resulting in microarrays of SCR043-functionalized polymer brushes, where brush height (h) and SCR grafting density (Γ) is controlled precisely at each feature in the array. The influence of h and Γ on the binding to five fluorescently labelled monosaccharides – α-glucose (α-Gluc-FL), α-galactose (α-Gal-FL), α-mannose (α-Man-FL), β-glucose (β-Gluc-FL), and β-galactose (β-Gal-FL) – in aqueous buffer …

Analysis Of Leakage In Nearshore Pipelines Using Fitness For Service Method To Ensure Mechanical Integrity Based On Api-579 Level 3, Elriandri Elriandri, Dedi Priadi

Journal of Materials Exploration and Findings

The Fitness for Service (FFS) analysis is performed as a quantitative assessment to evaluate the integrity condition of a pipeline. Essentially, FFS assessment helps determine whether equipment components can operate safely despite existing deficiencies. This evaluation is carried out using the Finite Element Method (FEM). In the case of an underwater pipeline that experiences leak due to anchor pull at the flange connection, it undergoes plastic deformation and is lifted approximately 1 meter. As a mitigation step, inspection and repairs have been carried out by the company. Subsequently, modeling is performed to reconstruct the deformation process of the pipeline. Then, …

Assessment Of The Melt Quality Of A 30% Scrap Adc12 Aluminium Alloy Using The Inclusion And Fluidity Measurement Instrument (Ifmi) With Mullite Ceramic Filters, Gusti Ruri Ruri Lestari, Sandya Ananda Riswan, Muhammad Anis, Ahmad Ashari, Paramita Vidya Ayuningtyas, Bambang Suharno Prof, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The increasing demand for sustainable practices in the metal casting industry has driven the use of recycled aluminum alloys such as ADC12. However, the addition of aluminum scrap tends to increase oxide inclusions, which reduce melt fluidity and compromise casting quality. This study utilizes the Inclusion and Fluidity Measurement Instrument (IFMI), equipped with mullite ceramic filters, to assess the melt quality of ADC12 aluminum alloy containing 30% scrap. Fluidity and inclusion characteristics were evaluated at five pouring temperatures (660°C, 680°C, 700°C, 720°C, and 740°C). The results show that fluidity increased with temperature, reaching a peak of 84.6 g·s⁻¹ at 740°C, …

Equipment Criticality Analysis To Determine Asset Integrity Management System Scheme In Supporting Production Optimization Scenarios In The Aeging Field, Donny Andryanto, Donanta Dhaneswara

Journal of Materials Exploration and Findings

This research investigates the production decline and cost increase in the X&Y oil and gas fields from 2022 to 2023. Production fell by 34%, while production costs per barrel rose by 79%. To address these issues, a series of optimization processes are proposed. These aim to restructure and enhance the production facilities to reduce current production costs. The optimizations include reducing pressure at the PPP Platform in 2024. Additional steps include shutting down CPP-ORF 14” pipelines and most processes at CPP 2 Platform by 2027 to convert it into an accommodation platform. Further, the plan involves optimizing the release of …

An Overview Of Biomass-Derived Graphene Oxide And Its Characteristics For Future Sustainable Applications, Afif Wardana, Ahmad Nabil Shahab, Donanta Dhaneswara, Nofrijon Sofyan

Journal of Materials Exploration and Findings

The production of graphene oxide (GO) from biomass presents considerable promise as a sustainable alternative substitute for traditional semiconductors. Biomass waste, abundant and often underutilized worldwide, is distinguished by its high carbon content and regenerative characteristics, rendering it an optimal resource for sustainable material production. By heating its biopolymers, lignocellulosic biomass can be used as a new material to make graphene, which forms three-dimensional turbostratic crystallites. These crystallites, composed of partially defective aromatic carbon sheets with graphite-like characteristics, make it easier to create GO with specialized functions for cutting-edge applications. Its capability underscores the revolutionary potential of biomass waste in …

Morphological Test Of Areca Nut Fiber Ceramic Membrane Using Scanning Electron Microscopy Energy Dispersive X-Ray Mapping Spectroscopy, Amelia Marzain, Siti Umi Kalsum, Marhadi Marhadi, Ahmad Nabil Shahab

Journal of Materials Exploration and Findings

This study investigates the potential of ceramic membranes derived from areca nut fiber as a cost-effective and environmentally sustainable material for the removal of iron (Fe) and manganese (Mn) from groundwater. Two types of membranes were fabricated: one without activation and one chemically activated using 10% sodium hydroxide (NaOH). The morphological and elemental characteristics of both membranes were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) mapping. The concentrations of Fe and Mn before and after treatment were measured using Atomic Absorption Spectroscopy (AAS). The NaOH-activated membrane exhibited a more porous surface structure and higher oxygen content, …

Synthesis Of Antibody Functionalized Polyaniline/Polystyrene/N-Gqds Composite Fibermats For Sweat Based Cortisol Biosensing Applications, Ashwin James

Honors Theses

Noninvasive, wearable biosensors capable of detecting stress biomarkers in sweat require electrodes that are flexible, conductive, insoluble in water, and highly sensitive at low concentrations of analyte. In this work, bovine serum albumin blocked and anti-cmab immobilized nitrogen doped graphene quantum dots integrated polyaniline/polystyrene composite fibermat electrodes (BSA/Anti-Cmab/N-GQDs/PANI/PS electrodes) were synthesized and evaluated as a potential platform for an electrochemical cortisol biosensor in sweat based systems. Polyaniline was utilized in order to provide electrical conductivity, while polystyrene served as a carrying polymer for mechanical support and its hydrophobicity. Composite fibermats were manufactured through Forcespinning™, followed by a secondary polyaniline graft …

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …

Remaining Life Assessment And Fitness For Service Evaluation Of Aging Chemical Reactors In Polyethylene Terephthalate Resin Industry, Aditya Pahlawan Munthe, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra

Journal of Materials Exploration and Findings

Aging chemical reactors in the polyethylene terephthalate (PET) resin industry require comprehensive evaluation to ensure safe continued operation. This study conducts a remaining life assessment (RLA) and fitness-for-service (FFS) evaluation on five 30-year-old reactors, based on API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div. 1 standards. The analysis involves corrosion rate measurement, future corrosion allowance (FCA) projection, and minimum thickness verification. Among the reactors, R-120 was found to have the shortest remaining life less than 15 years. FFS assessments using three criteria Average Measured Thickness, MAWP from Point Thickness Readings, and Minimum Measured Thickness confirm that R-120 …

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO₂ emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

Catalyzed Chemical Recycling Of Poly(Ethylene Terephthalate) For Enhanced Sustainability, Gilberto J. Hernandez-Leypon Jr.

Master's Theses

Plastics are ubiquitous in the production of consumer and industrial products; their chemical stability, low cost of production, and performance versatility make them the best option for many industries. Their inherent benefits, specifically durability, is the basis for the negative environmental impact of polymers. Improper containment of endof-life polymer products causes unintentional migration into the environment. The monomers for many common polymer types are also fossil fuel based further increasing the environmental impact of the plastic lifecycle. Recycling is a possible method of closing the loop of the plastic lifecycle. Currently most recycling is physical, thermally reprocessing used plastics into …

Myceli-Yum: Elucidating Structure-Property Relationships For Polymer Degradation By Mycelial Digestion, Jordan Scott Ford

Master's Theses

Since the industrial entrance of polymer plastic materials, plastic has become ubiquitous in both everyday use and waste. Due to inefficiencies and knowledge gaps, current recycling methods are not able to account for the high scale of plastic waste, resulting in the bulk of this waste being landfilled, mishandled, and deposited in the environment. Mycelium, the microorganism responsible for fruiting mushroom bodies and mold growth, holds potential to reduce plastic waste and can potentially be utilized as a method of industrial recycling. Following a drug-design approach, the active site of mycelial enzymes responsible for natural biopolymer degradation have been assessed …

Comparing Machine Learning Paired Optimization Strategies For Single-Component Waterborne Direct-To-Metal Coatings, Harvir S. Kalkat

Master's Theses

As R&D attempts to fine tune properties before production, the redesign and testing process can become highly iterative. The repetitive nature of formulating can be difficult to escape when relying on chemical intuition alone. To provide some guidance in this process, machine learning (ML) can leverage data from previous trials¹ to design suggestions for subsequent trials. Although ML capabilities have vastly expanded in the last few years, integration of ML into chemistry R&D and education has been slow. Unraveling the mystique of ML can help change what has been a slow embrace in the coatings industry. It is important …

Trade-Off Between Limonene & Geraniol-Based Reprocessable And Non-Reprocessable Epoxy Thermosets: Role Of Aliphatic Diamines In Polymer Networks Design, Priyankkumar Kanubhai Patel

Electronic Theses & Dissertations

The growing demand for sustainable materials, driven by environmental concerns and the rapid depletion of fossil fuels, has garnered significant attention in the fabrication of bio-based epoxy thermosets as renewable alternatives to petroleum-derived thermosetting polymers. The present study focuses on the synthesis and characterization of epoxy prepolymer resins derived from limonene and geraniol via a two-step process, followed by the fabrication of thermally cross-linked flexible epoxy thermoset films using various traditional aliphatic diamine curing agents, namely 1,2-ethylenediamine (EDA), 1,4-butylenediamine (BDA), and 1,6-hexamethylenediamine (HDA). Additionally, the incorporation of cystamine, a disulfide-containing diamine, enabled the formation of a covalent adaptable network through …

Mechanistic Investigation Of Ring-Opening Polymerization Of Polycaprolactone Using Tin(Ii) Catalysts: Ligand Effects And Biomedical Applications, Eva-Larue M. Barber

Honors Scholar Theses

This research explores the mechanistic aspects of ring-opening polymerization (ROP) of ε-caprolactone (CL) to produce polycaprolactone (PCL), a biodegradable polymer widely used in biomedical applications. The study investigates how light exposure and catalyst concentration influence polymerization efficiency, using tin(II) 2-ethylhexanoate [Sn(Oct)₂] as the catalyst in a non-polar toluene solvent at 90 °C. Reactions were conducted under either ambient light or black light bulb (BLB) illumination, with monomer-to-catalyst ratios of 1:1 and 200:1.

Proton nuclear magnetic resonance (¹H NMR) spectroscopy was used to analyze conversion efficiency by tracking the disappearance of monomer signals and appearance of characteristic PCL peaks. Results revealed …