Polymer Chemistry Commons^™

Assessment Of H2s-Induced Cracking Susceptibility In Steam Line Pipes And Weld Zones During Geothermal Well Construction, Riene Kaelamanda Pragitta, Yudha Pratesa

Journal of Materials Exploration and Findings

The susceptibility of steam line pipes, especially in the HAZ (heat-affected zone) and weldment areas, to hydrogen sulfide in the geothermal industry is crucial to understand from the early stages, particularly during construction. The combination of tensile stress from residual stresses after welding and metallurgical phase transformation makes the joint areas vulnerable to sulfide stress cracking. This condition becomes even more extreme when the equipment operates during the well stimulation phase. This research assesses the severity of H₂S-induced cracking using NACE MR0175 and ISO 15156-1 standards, focusing on the effects of pH and partial pressure of H₂S (p_{H₂S …}

Computational Analysis Of Proton Conductivity Factors In Grotthuss-Style Mechanisms, Brock Dyer

Physics and Astronomy Honors Papers

The mechanism and fundamental molecular properties involved in proton conduction are discussed. Four calculable properties are presented: the proton affinity, binding energy (between protonated and neutral forms), intramolecular tautomerization barrier, and proton hopping barrier. An overview of the computational methods used in this thesis, including an introduction to the many-body Schrödinger equation and Density Functional Theory, as well as a look at Plane-Wave Density Functional Theory and Gaussian-Type Orbital Density Functional Theory are presented. 4,5-dimethyl-[1,2,3]-triazole is used as a model system, with 10 variations being generated with varying amounts and positions of fluorine substitution on the methyl groups. Preliminary calculations …

Tailor-Designed Oxalic Acid-Crosslinked Poly(Vinyl Alcohol)/Chitosan Biodegradable Films For Active Food Packaging Applications, Reem Hazem Fathy Anwar Elaasar

Theses and Dissertations

Food packaging plastic waste is posing great threats to ecosystems, human health, and the planet's overall sustainability; therefore, research has been directed towards the fabrication of biodegradable food packaging materials. In this study, active and biodegradable oxalic acid (OA) crosslinked poly(vinyl alcohol) (PVA)/chitosan (CS) composite films of different weight ratios were synthesized via the solvent casting technique and their food packaging properties were investigated. Owing to its water resistance and antibacterial superiority, the composite film with the ratio of OA chemically crosslinked PVA/CS 80:20 was elected to be coated with green tea extract (GTE) to ameliorate its antibacterial and antioxidant …

Characterization And Optimization Of Sand And Tung Oil-Based Resins For Binder-Jet 3d Printing, Daniel I. Ajiola

College of Graduate Studies: Theses & Dissertations

Binder-jet 3D printing as a transformative technology in additive manufacturing, offers the ability to fabricate complex structures with diverse materials. This thesis investigates the use of a sustainable tung oil-based resin to create composites, exploring the potential for an eco-friendly alternative to synthetic binders.

The aim of this research is to develop and characterize a bio-based resin formulation, using tung oil as the primary binder, for application in binder-jet 3D printing with sand as the reinforcement. The resin formulation was prepared by combining tung oil, n-butyl methacrylate, divinylbenzene, and di-tert-butyl peroxide in precise proportions, ensuring a balanced mixture that supports …

Individual And Collective Properties Of Tunable Photochemical Belousov-Zhabotinsky Micro-Reactors, Kudakwashe Benedict Shumba

Graduate Theses, Dissertations, and Problem Reports (ETD)

Cell-like model chemical systems are powerful tools that can be used to explore the role of intercellular coupling on population level behaviors in communities of biological cells. Firstly, we present a new method for fabricating such micro-reactors using the photosensitive Belousov–Zhabotinsky (BZ) reaction system employed in silica microparticles. These BZ micro-reactors have a tunable response to photochemical coupling, varying from a fully excitatory response to a fully inhibitory response. Their response can be tuned through variations in either the reactive mixture or, on an individual micro-reactor level, by changes in the synthesis temperature used during the fabrication of the silica …

Single-Step Synthesis Of Activated Carbon From Arabica Spent Coffee Ground Using K2co3 As Activator Agent, Ghina Ivana Mieldan, Yuliusman Yuliusman

Journal of Materials Exploration and Findings

Activated carbon is a nanomaterial that is often used as an effective adsorbent. Activated carbon raw materials can use biomass, such as coffee grounds, which can be found along with the growth of public interest in coffee drinks. Chemical activators are used for activation to increase biomass carbon's adsorption capacity. Using K₂CO₃ activator to increase the specific surface area of activated carbon is more harmless than KOH. The use of spent coffee grounds as carbon source and food additive K₂CO₃ as an activator can make food-grade activated carbon that can be used for food. …

Effect Of Alkyd And Polyester Resin Compositions On Corrosion Resistance, Blistering, And Adhesion In Utilization Of Oily Sludge As Anti-Rust Coating Material, Gerets Land Kakalang, Yohanes David Kristianto, Johny Wahyuadi Mudaryoto

Journal of Materials Exploration and Findings

Oil sludge is a waste derived from upstream and downstream activities of the oil and gas industry which is estimated at 10,000 tonnes generated from all PERTAMINA downstream activities spread across various fields, processing units and depots throughout Indonesia. Oil sludge has the same characteristics as asphalt, where asphalt in previous studies can be used as an anti-rust coating, so that the handling of oily sludge can be topped up by reusing and having its own added value. The purpose of this research is to utilise waste oily sludge as an alternative anti-rust coating material and compare alkyd resin and …

Recyclable Composites Prepared From Animal Coproducts And Industrial Waste Sulfur, Perla Y. Sauceda-Oloño

All Dissertations

Pursuing sustainable and environmentally friendly materials has become a significant objective in materials science, particularly flame retardants and construction materials. This dissertation explores the development and evaluation of novel composites and high sulfur-content materials (HSMs) as potential alternatives to conventional, environmentally harmful materials.

Chapter one reviews recent advancements in environmentally benign flame-retardant additives, highlighting the potential of bio-derived phenols, polysaccharide derivatives, and greener phosphorus sources. The review discusses how green additives can enhance the flame retardancy, thermal stability, and smoke suppression properties of various polymers while addressing the challenges and future directions in the field.

Chapter two investigates the production …

Solubility Characterization Of Organic Molecules For Aqueous Organic Redox Flow Batteries, Anthony W. Ferrell, Harkeerith K. Vij, Seamus D. Jones

College of Engineering Summer Undergraduate Research Program

The major obstacle to renewable energy sources is a lack of long-term energy storage capabilities. Energy produced during the day dissipates, leaving insufficient electricity for at night. The goal of the project is to design an Aqueous Organic Redox Flow Battery (AORFB) to act as long-term energy storage. Work has been done using machine learning to identify suitable compounds for the batteries. In this work there was no indication as to the aqueous solubility of the molecules; this controls the device’s energy storage capabilities. We used a machine learning model to determine the aqueous solubility of slightly more than 3000 …

Poly(Thioether) Thermosets With Gated Photodegradation, Surabhi Jha

Dissertations

Photodegradable polymer networks are attractive due to the precise spatiotemporal control and large-area applicability of light. Chemical linkages that enable these polymer networks to be photo-responsive, also hinder their applicability in ambient light. Photostable and photodegradable networks have recently been reported to overcome this challenge by combining other stimuli with light for degradation. We report the design of a network that responds to a simultaneous, dual stimulus for photodegradation. We design poly(thioether acetal) networks with benzylidene acetal moieties that are known to undergo β-scission in the presence of free thiols. By blocking these free thiols with a thermally labile protecting …

Thermal Effects On The Voc-Sensitive Polydimethylsiloxane Holographic Gratings, Aleksandra Hernik, Faolan Radford Mcgovern, Patrick Iftime, Izabela Naydenova

Conference Papers

The imperative for monitoring volatile organic compounds (VOCs) emerges from their harmful impact on human health when inhaled excessively over a long term. Polydimethylsiloxane (PDMS), valued for its transparency and excellent flexibility, has already been demonstrated as a promising biocompatible and cost-effective transducer for optical VOCs sensing. Moreover, it facilitates further functionalisation with adsorbing materials to enhance sensitivity and selectivity for specific VOCs detection. We fabricated and examined PDMS-based surface diffraction gratings after exposure to selected VOCs, demonstrating different response for polar and non-polar molecules. Investigated gratings were prepared by replicating sinusoidal surface relief structures inscribed in acrylamide photopolymer using …

Analysis Of The Effect Of Different Surface Preparation Methods On Corrosion Resistance And Adhesion Strength Of Astm A36 Steel Substrate With Surface Tolerant Epoxy Paint As Coating Material, Irwan Wijaya Santoso, Daffa Aqila, Rini Riastuti, Rizal Tresna Ramadhani

Journal of Materials Exploration and Findings

In the industrial world, to extend the service life of materials, protection methods are carried out to slow down the material's corrosion rate. The protection method that is often used is the coating method. The coating method is a protection method by coating the substrate material using a coating material to prevent contact between the substrate material and the environment. In this research, the substrate material used is ASTM A36 steel and the coating material used is Surface Tolerant Epoxy paint. The independent variable used in this study lies in the surface preparation method which consists of: solvent cleaning, hand …

The Effects Of Free Volume And Processing On The Development Of Gas Separation Membranes, Jacob Schekman

Dissertations

Structure, thermal, mechanical, gas transport, and free volume properties of thiol-ene based systems are investigated and discussed. In the pursuit of generating low energy-cost polymer membranes for gas separation, it became apparent that UV-curing of thiol-ene materials presented several routes toward achieving this goal. Network structure plays a vital role in determining the gas transport properties of membrane materials. UV photopolymerization techniques provide a means to rapidly vitrify network morphologies which can be tuned depending on choice of monomer. Thiol-ene monomers offer a broad range of precursor materials from which to choose for the design of functional membrane materials.

Chapter …

Structure-Property Relationship Studies Of Electrically Conductive Metal-Organic Framework Materials, Shiyu Zhang

All Dissertations

Electrically conductive metal-organic frameworks (EC-MOFs) are among the most promising materials due to their tunable structures, properties, and diverse functions. However, the lack of comprehensive understanding of their structure-property relationship hinders the development of EC-MOFs. My dissertation focuses on the design, construction, and structure-property relationship studies of EC-MOFs.

Chapter 1 describes how MOFs' structural features and compositions affect the electronic properties and demonstrates conductive mechanisms and the corresponding design strategies to develop EC-MOFs.

Chapter 2 describes the synthesis, characterization, electronic and optical properties of four novel alkali-metal-based (Na, K, Rb, and Cs) 3D-MOFs with continuous tetrathiafulvalene tetracarboxylate (TTFTC) π-stacks, systematicly …

Thermal Frontal Polymerization – Applications In Coatings And Composites, Maria Martinez

LSU Doctoral Dissertations

Thermal frontal polymerization has long been used as a method to cure composites and coatings. However, this is the first time these applications have been used without the use of a catalyst, for the case of composites and coatings.

Chapter 2 discusses how to optimize cure-on-demand, thin layer coatings, using frontal polymerization. Previously, for the use of curing thin layer coating using thermal FP, it was known to just make the formulation viscous enough, as this would prevent premature quenching caused by heat loss. It was discovered that for a given layer thickness, a minimum viscosity and initiator concentration were …

Thin-Film Nanocomposite Membranes With Alumina Nanoparticles For Textile Wastewater Treatment Applications, Amr Mohamed Tayel

Theses and Dissertations

Thin-film nanocomposite (TFN) membranes are gaining great interest in industrial wastewater treatment due to their superior performance, especially for higher water flux and pollutants’ rejection, as well as improved chemical, thermal and mechanical stabilities, compared to other types of membranes. The performance of TFN membranes can be enhanced using different types of nanofillers, among which ceramic nanomaterials, such as Al2O3, offer a promising potential for applications involving treatment of industrial wastewater such as textile effluents, and this is due to their stability, hydrophilicity, and relative low cost. The study of the TFN membrane properties and structure allows the optimization and …

The Surface Chemistry And Binding Interactions Of Lignin With Polymer-Encapsulated Gold Nanoparticles Acting As Model Microplastics, Oluwaseun Ayodeji Akinsola

All Master's Theses

This study investigates the surface chemistry and molecular-level interactions between lignin, a special type of natural organic matter, and polymer-capped gold nanoparticles, shedding light on the strength of adsorption between lignin and nanoscale polymer surfaces. Specifically, the study presents a variety of nanoscale polymer surfaces displaying different charged functional groups, using layer-by-layer assembly of three polyelectrolytes (polyallylamine hydrochloride (PAH)), polyacrylic acid (PAA), and poly(diallyldimethylammonium chloride (PDADMAC)) on 90 nm citrate-stabilized gold nanoparticles (AuNPs). This approach provides a library of polymer-encapsulated AuNPs for investigating the binding interactions of lignin to nanoscale polymers via spectroscopic techniques. ζ-potential, dynamic light scattering (DLS), …

Addressing The Effects Of Counterion Size On The Properties Of Electrochemically Doped Conjugated Polymers, Kyle Baustert

Theses and Dissertations--Chemistry

Conjugated polymers (CPs) are an emerging class of materials that are attractive for many applications due to their low cost, flexibility, and ease of processing. Both chemical and electrochemical doping of CPs is done to alter important properties such as their electrical conductivities and optical absorbances. This ability to tune their properties allows for their use in devices such as organic electrochemical transistors (OECTs) for biosensing and bioelectronics, electrochromic devices for color changing windows, as well as wearable thermoelectrics to use body heat to power wearable electronics. There are several factors that can influence the properties of doped CPs including …

Synthesis, Functionalization, And Application Of Polymeric Membrane Blends Of Polysulfone, Poly-Ether Ether-Ketone, And Natural Fiber Additive Biochar For Optimal Water Treatment., Abelline Katusiime Fionah

Theses and Dissertations--Chemistry

According to the Center for disease control (CDC), an estimated 1.7 to 2.2 million persons die from waterborne diseases annually. The majority of individuals dying from diseases resulting from unsafe drinking water, such as diarrhea and gastroenteritis, are children. This has in turn created a global water crisis. Different methods have been developed to treat contaminated water in response to the global water crisis such as adsorption, filtration, ozonolysis, catalysis, etc. Of the methods available, filtration via polymeric membranes has been one of the most successfully applied. A membrane is a thin semi-permeable barrier (often made of a polymer) used …

Combined Risk Based Inspection And Fault Tree Analysis For Repetitive 3-Phase Line Piping Leakage At West Java Offshore Topside Facility, Dona Yuliati, Akhmad Herman Yuwono, D. Rizal Asral, Donanta Dhaneswara

Journal of Materials Exploration and Findings

Hydrocarbon releases might result in serious consequences in various aspects. In addition to the contribution to environmental pollution, repetitive leakages need high repair costs. This study aim is to minimize potential repetitive leakage for other typical 3-phase piping systems. We conducted the risk assessment by adopting Risk Based Inspection (RBI) API 581 to identify risk level, calculating piping lifetime, recommended inspection plan and mitigations. The most relevant root causes can be obtained through quantitative Fault Tree Analysis (FTA). Observation and investigation was taken from eight 3-phase piping systems that experienced repetitive leakages. It has been found that the risk level …

Nitrogen Gas Quenching Pressure Effect On Bs S155 Alloy Steel In Vacuum Furnace, Agus Mulyadi Hasanudin, Eddy Sumarno Siradj

Journal of Materials Exploration and Findings

The production of metal and alloy products requires the use of heat treatment, when during the heat treatment process, quenching is a crucial step. The quenching medium can be anything from water, a salt bath, oil, air and gas. In a vacuum furnace, pressurized gas, most frequently nitrogen (N₂) gas, serves as one of the quenching mediums. One of the drawbacks of the quenching process is the distortion and dimensional change of the parts. This paper aims to investigate the influence of nitrogen gas quenching pressure on the distortion and dimensional change of aerospace actuator gear planet parts …

Optimization Of Transition-Metal Inclusive Carbon Aerogels For Electrochemical Energy Applications, Allen Dalton Davis

Electronic Theses & Dissertations

The ever-growing need for energy alongside rising concerns for climate change demands the development of renewable energy technologies. Hydrogen fuel cells are a promising technology that can serve to either supplement energy generation or act as a lone power source. Yet for these devices to be truly green, the hydrogen that serves as fuel must be procured from a renewable resource. Electrolytic water splitting is a process that allows for the dissociation of water into H₂ and O₂. For this process to be practical, the electrolyzer needs to demonstrate high efficiency and stability, as well as a …

Exploring Soybean Oil-Based Polyol And Effect Of Non-Halogenated Flame Retardants In Rigid Polyurethane Foam, Sahithi Kondaveeti

Electronic Theses & Dissertations

To address the increasing demand for sustainable biomaterials due to the depletion of fossil fuel resources and growing environmental concerns, a new type of biodegradable and environmentally friendly rigid polyurethane foam (RPUF) has been synthesized. These foams are derived from chemically modified soybean oil-based polyol obtained from soybean oil by epoxidation followed by a ring-opening reaction. Polyurethane foam is generally used in construction, furniture, and automobile industries but is highly flammable and releases toxic gases and smoke during combustion. In this study, a highly efficient synergistic effect halogen-free flame-retardant (FR) melamine salt, 2-carboxyethyl(phenyl)phosphinic acid melamine salt (CMA) was synthesized from …

Enhanced Mechanical Strength Of Soybean Oil-Based Non-Isocyanate Polyurethane Adhesive For Wood Application By Introducing Nanofillers, Vatsal Chaudhari

Electronic Theses & Dissertations

Polyurethane (PU) is a versatile material that finds extensive use in various industries including bedding, construction, automotive, and packaging. Historically, this particular polymer relied significantly on petrochemical resources, a practice that was considered to have negative environmental impacts. The conventional method for preparing PU involves the use of isocyanate, which is a disadvantage due to its negative impact on the environment and human health. The resolution of this problem entails identifying an appropriate substitute for petroleum-derived products that minimize their impact on both the environment and human health. The researchers earlier utilized soybean oil, for the formulation of PUs in …

Castor Oil Polyol-Based Adhesives With Additional Crosslinker For Improvement In Mechanical And Thermal Properties., Yash Desai

Electronic Theses & Dissertations

Polyurethanes (PU) have been promising polymeric materials with many applications, including adhesives. Projecting an estimated revenue from 42.8 billion $ in 2021 to 61.5 billion $ by 2026. However, a large number of PU adhesives are sourced from petroleum products. Therefore, to lower the dependence on non-renewable resources and provide sustainable and affordable alternatives. In this work will synthesize bio-based adhesives of polyurethane from modified castor oil-based polyol. Generally, polyurethane reaction depends on the properties of polyol and isocyanates. The most important aspect of these reactions is the OH number of the polyol, which is responsible for the crosslinking and …

High Temperature Materials From Bis-Ortho-Diynylarene (Boda)-Derived Resins And Perfluorocyclobutyl (Pfcb) Aryl Ether Polymers, Ernesto Isaac Borrego

Theses and Dissertations

This work expands the current understanding of materials chemistry and engineering capabilities of two synthetic platforms: 1.) bis-ortho-diynylarenes (BODA) and 2.) trifluorovinylaryl ethers (TFVE). Each platform possesses a unique chemistry which paradoxically enables the development of high-performance materials therefrom while simultaneously retaining exceptional melt and solution processability. Leveraging the apparent dichotomy in properties (performance/processability) obtainable from these two synthetics platforms, we have pursued and achieved a practical approach to high-temperature resistant materials with an immense potential for technology transfer and commercialization:

1.) BODA-derived resins (BDR) constitute a versatile platform of melt-processable resins capable of rapidly producing high performance …

Nanoparticles And The Environment: Biopolymer Grafted Cellulose And Screen-Printed Carbon Nanotube Composites, Dominique Henry Porcincula

Master's Theses

A host of environmental issues will define the state of the environment in the 21^st century, with plastic pollution and water shortages among them. While solutions to these problems require large-scale, multipronged solutions, one way we can address them is through material innovation and the use of nanoparticles.

In the first project, we address the issue of plastic pollution by creating nanocomposites of biodegradable polymers (PLA and PCL) with cellulose nanofibrils. Here, PLA and PCL are grafted from the surface of cellulose nanofibrils via ring-opening polymerization of cyclic ester monomers. Polymer-grafted cellulose (PGC) is characterized with structural analysis, solubility …

Characterization Of Interlayer Laser Shock Peening During Fused Filament Fabrication Of Polylactic Acid (Pla), Fabien Denise

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The field of additive manufacturing (AM) has gained a significant amount of popularity due to the increasing need for more sustainable manufacturing techniques and the adaptive development of complex product geometries. The problem is that AM parts routinely exhibit flaws or weaknesses that affect functionality or performance. Over the years, surface treatments have been developed to compensate certain flaws or weaknesses in manufactured products. Combining surface treatments with the modularity of additive manufacturing could lead to more adaptable and creative improvements of product functions in the future. The current work evaluates the feasibility of pursuing a new research axis in …

Synthesis And Characterization Of Polymer-Based Complex Nanomaterials, Prashun G. Roy

Dissertations, Theses, and Capstone Projects

The original research work in this dissertation is about the use of polymers in two significantly important areas. One involves creating mesoporous silica materials with various morphologies using a mixed Pluronic surfactant system made up of two poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) surfactants, one of which contains long hydrophilic (PEO) blocks and the other has a significantly higher proportion of hydrophobic PPO . In addition, a glucose responsive core-shell type microgel was also developed for shifting the glucose responsive volume phase transition by using polymeric nanomaterials.

Chapter 1 of the dissertation discussed some historical background of synthesis and uses of …

Composite And Polymer Formulation Employing Sulfur And Bio-Olefin Feedstocks, Claudia V. Lopez

All Dissertations

Environmental sustainability represents a challenge for society since industrial growth has a direct impact on natural resources and waste production. New technologies that effectively incorporate waste into renewable resources are critical to the development of a sustainable and circular economy. The manufacturing of structural materials like Portland cement (OPC) is responsible for >8% of the global anthropogenic emissions of carbon dioxide, with ~ 1 kg of CO₂ released to the atmosphere for every kilogram of OPC produced. For instance, the development of sustainable structural materials is a key factor to reduce the greenhouse emissions and to attenuate the climate …