Polymer Chemistry Commons^™

Anthrone-Based Dummy Molecularly Imprinted Polymer For The Selective Detection Of Fluorene And Phenanthrene In Simulated River Water, Aria Pinandita, Nurrahmi Handayani, Muhammad Iqbal, Untung Triadhi, Rusnadi Rusnadi, Samitha Dewi Djajanti, Muhammad Bachri Amran, Muhammad Ali Zulfikar

Makara Journal of Science

A dummy-template molecularly imprinted polymer (DMIP) was synthesized via precipitation polymerization using anthrone as a template analog for the selective analysis of low-molecular-weight polycyclic aromatic hydrocarbons (PAHs), specifically fluorene and phenanthrene. Styrene, benzoyl peroxide, and ethylene glycol dimethacrylate were employed as the functional monomer, radical initiator, and crosslinking agent, respectively. The synthesized polymers were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, and particle size analysis. The imprinting factors were 1.16 and 1.09 for fluorene and phenanthrene, respectively, indicating enhanced affinity of the imprinted sites. High-performance liquid chromatography analysis following DMIP-based solid-phase extraction yielded recoveries of 91.49% ± 3.87% for …

Monosaccharide Binding To Synthetic Carbohydrate Receptor Microarrays, Milan A. Shlain

Dissertations, Theses, and Capstone Projects

Chapter 1: A glycan detection platform comprised of synthetic carbohydrate receptors (SCRs) immobilized onto polymer brushes was prepared. SCR043, an alkene-containing SCR, was incorporated into grafted-from polymer brushes using hypersurface photolithography, resulting in microarrays of SCR043-functionalized polymer brushes, where brush height (h) and SCR grafting density (Γ) is controlled precisely at each feature in the array. The influence of h and Γ on the binding to five fluorescently labelled monosaccharides – α-glucose (α-Gluc-FL), α-galactose (α-Gal-FL), α-mannose (α-Man-FL), β-glucose (β-Gluc-FL), and β-galactose (β-Gal-FL) – in aqueous buffer …

Identification Of Modified Polymer End Groups For Correlations To Physical Properties, Tj Sacco

Williams Honors College, Honors Research Projects

Plastic has become the primary material for containers in both industrial and commercial fields. Plastics are the optimal choice since they have many physical properties that make them ideal candidates: durability, heat resistance, chemical stability, as well as their inexpensive production cost. Nowadays, the desire for more versatile plastics with strength, flexibility, hydrophobicity, and biodegradability has grown; however, concerns for plastic use have started to rise as well. The overuse of plastics poses a threat to the environment and people’s health: plastics are hard to break down completely which results in the formation of micro(nano)plastics (MNPs). In attempts to circumvent …

Bio-Based Composites With Enhanced Mechanical Strength And Flame Retardancy, Riya Patel

Electronic Theses & Dissertations

Composites are versatile and useful in many fields, including aerospace, automotive, construction, and healthcare, due to their high mechanical strength. It is common practice to synthesize these materials using petroleum-based chemicals. Nonetheless, in the twenty-first century, scientists are more interested in using renewable resources to create composites. The greatest substitute for petroleum-based chemicals is vegetable oil. It has unsaturated double bonds that are modifiable chemically. In the present study, bio-polyol was synthesized using castor oil, an inedible vegetable oil. A ring-opening process was used to modify it and produce castor oil-based polyol. The synthesized castor oil-based polyol was characterized by …

Trade-Off Between Limonene & Geraniol-Based Reprocessable And Non-Reprocessable Epoxy Thermosets: Role Of Aliphatic Diamines In Polymer Networks Design, Priyankkumar Kanubhai Patel

Electronic Theses & Dissertations

The growing demand for sustainable materials, driven by environmental concerns and the rapid depletion of fossil fuels, has garnered significant attention in the fabrication of bio-based epoxy thermosets as renewable alternatives to petroleum-derived thermosetting polymers. The present study focuses on the synthesis and characterization of epoxy prepolymer resins derived from limonene and geraniol via a two-step process, followed by the fabrication of thermally cross-linked flexible epoxy thermoset films using various traditional aliphatic diamine curing agents, namely 1,2-ethylenediamine (EDA), 1,4-butylenediamine (BDA), and 1,6-hexamethylenediamine (HDA). Additionally, the incorporation of cystamine, a disulfide-containing diamine, enabled the formation of a covalent adaptable network through …

Mechanistic Investigation Of Ring-Opening Polymerization Of Polycaprolactone Using Tin(Ii) Catalysts: Ligand Effects And Biomedical Applications, Eva-Larue M. Barber

Honors Scholar Theses

This research explores the mechanistic aspects of ring-opening polymerization (ROP) of ε-caprolactone (CL) to produce polycaprolactone (PCL), a biodegradable polymer widely used in biomedical applications. The study investigates how light exposure and catalyst concentration influence polymerization efficiency, using tin(II) 2-ethylhexanoate [Sn(Oct)₂] as the catalyst in a non-polar toluene solvent at 90 °C. Reactions were conducted under either ambient light or black light bulb (BLB) illumination, with monomer-to-catalyst ratios of 1:1 and 200:1.

Proton nuclear magnetic resonance (¹H NMR) spectroscopy was used to analyze conversion efficiency by tracking the disappearance of monomer signals and appearance of characteristic PCL peaks. Results revealed …

The Conservation Treatment And Technical Study Of Two Marisol Sculptures, Ruthie Rolfsmeyer

Art Conservation Master's Projects

ABCDEFG & Hi (1961-62) and Father Damien (1966-67) are both painted wooden sculptures created by Marisol during the height of her fame. Although Marisol is a well-known artist, whose fame has been rekindling since her death in 2016, there have been few technical studies of her works. Multimodal imaging and scientific analysis of these two sculptures provide insight into their structure and materials. Techniques include x-ray radiography, reflectance transformation imaging, x-ray fluorescence spectroscopy, Fourier transform infrared spectroscopy, and pyrolysis-gas chromatography-mass spectrometry. Key findings include the identification of toolmarks, nitrocellulose, alkyd, and acrylic paints, and a genuine diamond and pearl in …

The Surface Chemistry And Binding Interactions Of Lignin With Polymer-Encapsulated Gold Nanoparticles Acting As Model Microplastics, Oluwaseun Ayodeji Akinsola

All Master's Theses

This study investigates the surface chemistry and molecular-level interactions between lignin, a special type of natural organic matter, and polymer-capped gold nanoparticles, shedding light on the strength of adsorption between lignin and nanoscale polymer surfaces. Specifically, the study presents a variety of nanoscale polymer surfaces displaying different charged functional groups, using layer-by-layer assembly of three polyelectrolytes (polyallylamine hydrochloride (PAH)), polyacrylic acid (PAA), and poly(diallyldimethylammonium chloride (PDADMAC)) on 90 nm citrate-stabilized gold nanoparticles (AuNPs). This approach provides a library of polymer-encapsulated AuNPs for investigating the binding interactions of lignin to nanoscale polymers via spectroscopic techniques. ζ-potential, dynamic light scattering (DLS), …

Addressing The Effects Of Counterion Size On The Properties Of Electrochemically Doped Conjugated Polymers, Kyle Baustert

Theses and Dissertations--Chemistry

Conjugated polymers (CPs) are an emerging class of materials that are attractive for many applications due to their low cost, flexibility, and ease of processing. Both chemical and electrochemical doping of CPs is done to alter important properties such as their electrical conductivities and optical absorbances. This ability to tune their properties allows for their use in devices such as organic electrochemical transistors (OECTs) for biosensing and bioelectronics, electrochromic devices for color changing windows, as well as wearable thermoelectrics to use body heat to power wearable electronics. There are several factors that can influence the properties of doped CPs including …

Use Of Interlaboratory Studies For The Development Of Consensus-Based Criteria For The Elemental Analysis Of Electrical Tapes, Lacey M. Leatherland

Graduate Theses, Dissertations, and Problem Reports (ETD)

Tape evidence is often used in criminal cases involving violent crimes, kidnappings, improvised explosive devices (IEDs), and drug trafficking. This evidence can reveal potential links between suspects, items, or scenes. The forensic examination of electrical tape can provide investigative leads or offer support to alternative hypotheses evaluated in the courtroom. A conventional analytical scheme includes microscopic examination, Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy Energy Dispersive Spectrometry (SEM-EDS), and Pyrolysis Gas Chromatography Mass Spectrometry (Py-GC/MS). Elemental analysis of electrical tapes is commonly achieved using SEM-EDS; however, recent scientific literature suggests that this analysis can evolve from using SEM-EDS to …

The Effect Of The Carbon Nanotubes’ Surface Area On The Morphology And Performance Of Cellulose Acetate Nanocomposite Membranes In Nanofiltration Applications, Nouran Elbadawi

Theses and Dissertations

Population increase and climate change have significantly affected the availability of fresh water for consumption. Studies by UNESCO showed that more than 28% of the world population didn’t have access to clean safe drinking water in 2020. This situation is expected to get more serious over the coming 30 years with the limited availability of natural fresh water sources. The need to find solutions from alternative non-freshwater resources for drinking or irrigation is becoming a necessity. Within the context of desalination technologies, thousands of investigations are conducted to find the cheapest most efficient way of water treatment aiming at expanding …

New Alkyd Resins From Underutilized Indigenous Seed Oils: Synthesis And Characterization, Aliru O. Mustapha, Hakeem B. Ayoku, Halimah A. Amao

Karbala International Journal of Modern Science

The underutilization of sesame (Sesamum indicum L.), sweet almond (Prunus amygdalus), and jatropha (Jatropha curcas) seeds indicates a significant resource waste. Nine different varieties of 25% (short), 40% (medium), and 60% (long) alkyd resins were produced from the cross-section of drying, semi-drying, and non-drying oils. A large amount of conversion occurred, with the extent of the reaction (Pav) decreasing as time progressed and the corresponding increase in alkyds' average degree of polymerization (Dp) showing synthesized alkyds. Surface drying from the set-to-dry and dry-through periods climaxed at 2 hours for all the alkyds. Except for alkali, synthesized alkyd resins demonstrated outstanding …

Synthesis And Application Of Redox-Active Covalent Organic Frameworks In Rechargeable Batteries, Mohammad K. Shehab

Theses and Dissertations

Synthesis and Application of Redox-Active Covalent Organic Frameworks in Rechargeable Batteries

Mohammad K. Shehab

Department of Chemistry, Virginia Commonwealth University, Richmond, Virginia 23284, United States

Abstract

In recent years, lithium-ion batteries (LIBs) have been considered the dominant energy storage devices for portable electronics and electric vehicles due to their high energy density, low self-discharge rate, and long cycle life. In LIBs, the traditional positive electrodes employed are mainly derived from metal-containing inorganic compounds composed of cobalt, iron, nickel, or manganese (LiCoO₂, LiMn₂O₄, and LiFePO₄) coupled with graphite as the negative electrode. Despite …

Development Of An Effective Au:Pd Bimetallic Heterogeneous Catalyst For Oxidative Lignin Depolymerization To Low Molecular Weight Aromatics, Gayan P. Karunasinghe

Theses and Dissertations--Chemistry

The principal concept behind biorefining involves the transformation of lignocellulosic biomass into valuable products and energy resources. Historically, biorefinery strategies for lignocellulosic biomass have primarily focused on improving the conversion of cellulose into ethanol, often neglecting the underutilized lignin component. Lignin consists of phenolic subunits, from which it follows that value-added products can be obtained from lignin depolymerization. Unfortunately, lignin utilization is particularly challenging due to its high structural irregularity and recalcitrance. The goal of this study was to develop an AuPd/Li-Al layered double hydroxide (LDH) bimetallic catalyst for efficient lignin depolymerization, resulting in the production of high-value aromatic compounds. …

Application Of Mass Spectrometry For The Characterization Of Synthetic Oligomers And Natural Lignin, Poorya Kamali

Theses and Dissertations--Chemistry

As part of the ongoing effort to substitute finite fuel and chemical resources with renewable ones, biomass is emerging as one of the most promising sources. Biomass consists of three main components of cellulose, hemicellulose, and lignin. Traditionally, cellulose has been used extensively in pulping industry, while lignin has been considered waste and is burned to generate heat. Lignin, a complex aromatic polymer component of biomass, has the potential to be used as a source of aromatic chemicals and pharmaceutical synthons. The recalcitrant nature of lignin, the lack of effective lignin breakdown methods and analytical techniques to analyze it are …

The Application Of Photoelectron Spectroscopies In Analyzing The Impact Of Interfacial Energetics On Perovskite Solar Cells, Tuo Liu

Theses and Dissertations--Chemistry

In recent years, organic-inorganic metal halide perovskites (HP) have garnered tremendous attention in photovoltaic research. This attention is attributed to their low cost and excellent optoelectronic properties, including large absorption coefficients, tunable bandgaps, long charge-carrier diffusion lengths, and low densities of deep trap states. Inverted p-i-n architecture perovskite solar cells (PSCs) are of intense interest and are generally regarded as more amenable to low-temperature solution processing. Nevertheless, the development of inverted PSCs is lagging the conventional architecture devices. Imperfect energy level alignments and charge carrier recombination, especially at the interface between perovskite and electron transport layers (ETLs), are two main …

Biomaterials: From Scaffold Design To Implant Optimization, Jennifer Marie Armen

Electronic Theses and Dissertations

This work encompasses three individual projects concerning biomaterials and their modifications. Chemically-Induced Cross-Linking of Peptidic Fibrils for Scaffolding Polymeric Particles and Macrophages EAK16-II (EAK) is a self-assembling peptide (SAP) that forms β-sheets and βfibrils through ionic-complementary interactions at physiological ionic strengths. The soft materials can be injected in vivo, creating depots of drugs and cells for rendering pharmacological and biological actions. The scope of the applications of EAK is sought to extend to tissues through which the flow of extracellular fluid tends to be limited. In such anatomical locales the rate and extent of the fibrilization are limited insofar as …

Nitro-Aromatic Polymers For Conversion-Style Battery Cathodic Materials, Brady P. Samuelson

Honors Thesis

The development of organic electrode materials in rechargeable batteries has seen a resurgence in recent decades. This spike in interest is mostly due to the increased investments in renewable energy sources, grid-scale energy storage, and the rapid transition to electric vehicles. Current lithium battery cathode materials typically use some form of lithium metal oxide (specific capacity: 272 mAh g^-1 which has problems with limited capacity, thermal runaway, and an unreliable supply chain. Our research group’s solution involves investigating new lightweight, organic redox groups combined with a conductive polymer backbone to serve as a possible replacement for the cathode in …

Analysis Of The Light Responsive Azobenzene Peptide Nucleic Acid Duplexes, Kat Nguyen

Honors College Theses

Peptide nucleic acids (PNAs) are oligonucleotide analogues in which the sugar-phosphate backbone has been replaced by a pseudopeptide skeleton. Since PNAs use the natural nucleobases (Adenine, Thymine, Cytosine, Uracil, and Guanine) found in either DNA and/or RNA, they are able to hybridize according to Watson-Crick base-pairing to form duplexes. PNA is a promising therapeutic agent because they can function as antigene or antisense chemical agents. To further enhance their utility, we aim to incorporate a photoswitchable moiety using azobenzene. Here, we report the results of the synthesis and purification of a photoswitchable 11 mer PNA along with initial characterization efforts.

Immobilized-Enzyme Reactors Integrated Into Analytical Platforms: Recent Advances And Challenges, Bert Wouters Dr, Sinead Currivan, Noor Abdulhussain, T. Hankemeier, Peter J. Schoenmakers

Articles

Immobilized-enzyme reactors (IMERs) are flow-through devices containing enzymes that are physically confined or localized with retention of their catalytic activities. IMERs can be used repeatedly and continuously and have been applied for (bio)polymer degradation, proteomics, biomarker discovery, inhibitor screening, and detection. Online integration of IMERs with analytical instrumentation, such as high-performance liquid chromatography (HPLC) systems, reduces the time needed for multi-step workflows, reduces the need for sample handling, and enables automation. However, online integration can also be challenging, as reaching its full potential requires complex instrumental setups and experienced users. This review aims to provide an assessment of recent advances …

Doping Of Conjugated Polymers: Preparation, Characterization And Device Fabrication, Kan Tang

Dissertations

Semiconducting conjugated polymers (CPs) as emerging materials for advanced electronic applications such as sensors, OPVs, and OEFTs has become an intriguing research topic in the past decades. It opens a new avenue of “flexible” electronics, which has shown great potential in next-generation electronic devices.

However, due to the nature of CP materials and related solution processing techniques, unlike almost perfectly crystalline silicon materials, CPs in the solid-state often exhibit much lower crystallinity if it is not complete amorphous, which severely hinder the electronic property and optical property of the materials. The crystallinity of CPs in a film is often uniquely …

Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent, Bulbul Ahmed

LSU Master's Theses

Hemp is considered as one of the sustainable agricultural fiber materials. Degumming or surface modification of hemp bast is needed to produce single fibers for ensuing textile and industrial applications. The traditional degumming process necessitates a high amount of alkali, which causes detrimental environmental pollution. This study offers a new method to degum hemp fibers with reduced use of harmful alkali and precious water resources. In this work, hemp bast fibers were degummed by using combined microwave energy and deep eutectic solvent (DES). The properties of hemp fibers manufactured by this method were investigated and compared with the traditional alkali …

A Conductivity Analysis Of A Newly Synthesized Poly(Ethylene Glycol) Methyl Ether Hydroxide Electrolyte, Sarah Marie Peterson

Honors Theses

This thesis investigates the synthesis and conductive properties of a Poly (ethylene glycol) methyl ether-based polymer electrolyte. The goal of the synthesis is to enhance the hydroxide ion conduction properties of the polymer with its cationic groups attached. The MePEG backbone contained seven ethylene glycol groups and was modified to substitute the hydroxide group in the MePEG with trimethylamine. In addition, the bromide added in the synthesis was exchanged for hydroxide ions to allow for the transportation of hydroxide ions in polymeric electrolytes that can be used in Anion Exchange Membrane Fuel Cells. The newly synthesized polymer was compared to …

Nitro Group Reduction For Use In Organic, Cathodic Materials, Brock G. Goeden

Honors Thesis

The industrial demand for higher capacity, light-weight battery materials has skyrocketed in recent years due to heavy investments in portable electronics, electronic vehicles, and renewable energy sources. However, rechargeable battery technology has seen little improvement since the invention of the Lithium-Ion battery in the 1980s. The low energy density of the traditionally utilized LiCoO2 cathodic material (specific capacity: 272 mAh g-1), has limited its potential to meet these increasing demands. To solve this problem, our research group is investigating new types of lightweight, organic, polymeric materials with conductive backbones as a possible replacement for the cathodic materials in Lithium-Ion batteries. …

Development Of Engineered Soil Surrogates For Modeling Natural Soil Sorption Behavior, Ghada Yehia Abdalla

LSU Doctoral Dissertations

The land produces more than 95% of the global food supply, and with a continuously growing population, we need to optimize the use of the available agricultural land. Soil organic matter (SOM) is an essential component of soils, especially concerning their fertility and sorption behavior. The chemical composition of the SOM consists of lipids, lignin, and cellulose. However, the heterogeneous and complex nature of SOM, and real soils, makes their study challenging and introduces uncontrollable factors.

Therefore, structural mimics of natural soils with increasing complexity representing the real soil functionality were synthesized and evaluated for bulk properties related to their …

Valorization Of Xylan In Agroforestry Waste Streams, Harrison Appiah

Graduate Theses, Dissertations, and Problem Reports (ETD)

Valorization of Xylan in Agroforestry Waste Streams.

Harrison Appiah

Microwave-assisted deep eutectic solvent and gamma-valerolactone metallic chloride catalyzed conversion of xylan to furfural were investigated using a 2x3 factorial experimental design at two levels of percent microwave power, reaction time, and catalyst concentration. The levels of each factor studied were (20%, 60% microwave power, 2, 4 minutes, and 10, 20mg) respectively. The effect of three metallic chloride catalysts (LiCl, FeCl3.6H20, CuCl2) on the conversion of xylan to furfural was also investigated. The gamma-valerolactone-ferric chloride sent system exhibited the highest mean yield of furfural (56.50%). The next highest furfural yield of …

Functionalized Materials From Atom Transfer Radical Processes, Sean Fischer

Electronic Theses and Dissertations

This work is focused on the synthesis, characterization, and application of functionalized materials prepared from atom transfer radical processes. Atom transfer radical processes encompass both atom transfer radical addition (ATRA) and polymerization (ATRP) reactions, both of which are catalyzed by ppm amounts of copper complexes. The synthetic efforts of ATRA include increasing adduct selectivity through optimization of reaction conditions to generate small molecules in high to moderate yields. ATRA provides retention of the halogen moiety, which is an attractive functional group that can be further modified with other transformations. Specifically, the copper-catalyzed azide-alkyne [3+2] cycloaddition (CuAAC) allows for the realization …

Structure And Dynamics Of Phospholipid Vesicles And The Dependence On Nanoscale Interactions With Molecules Of Varying Complexity, Lakshapathy Widanelage Judith Upeka De Mel

LSU Doctoral Dissertations

In this dissertation, molecular interactions and changes imposed by nano-scale structures on phospholipid vesicles were investigated. 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) large unilamellar vesicles (LUVs) were used as the model system. Understanding changes of the bilayer structure, interfacial properties, lipid dynamics, and self-assembly, allows bridging relationships between biological cell membrane structure and dynamics to cellular functionalities. For example, membrane curvature changes are linked to membrane protein functions, although the exact mechanisms of control are not yet understood. Moreover, the knowledge gained from vesicle models allows exploring novel strategies for drug delivery applications. To achieve this, DOPC LUVs were synthesized and characterized by a …

Synthesis And Characterization Of Water-Soluble Polyaniline For Hydrazine Detection / Hazira Hussin, Hazira Hussin

Student Works (2020-2029)

In this study, polyaniline (PAni) was synthesized through the chemical oxidation method using aniline (Ani) as a monomer, hydrochloric acid (HCl) as a dopant, and ammonium persulphate (APS) as an initiator. PAni was rendered water soluble through treating with cellulose derivatives. Cellulose derivatives such as methylcellulose (MC), hydroxypropyl cellulose (HPC), and hydroxypropyl methylcellulose (HPMC) were used as a stabilizer to improve the solubility of PAni in an aqueous medium. The water-soluble PAni-cellulose derivative was applied as a chemical sensor for hydrazine detection. The chemical structures and electrical conducting behaviours of PAni-cellulose derivatives were investigated using Fourier transform infrared (FTIR) and …

Visualization Without Vision – How Blind And Visually Impaired Students And Researchers Engage With Molecular Structures, Croix J. Laconsay, Henry B. Wedler, Dean J. Tantillo

Journal of Science Education for Students with Disabilities

This article examines the tools and techniques currently available that enable blind and visually impaired (BVI) individuals to visualize three-dimensional objects used in learning chemistry concepts. How BVI individuals engage with and visualize molecular structure is discussed and recent tactile (or haptic) and auditory methods for visualization of various chemistry concepts are summarized. Remaining challenges for chemistry education researchers are described with the aim of highlighting the potential value of educational research in further enabling BVI students to pursue careers in science, technology, engineering, and mathematics (STEM) fields.