Open Access. Powered by Scholars. Published by Universities.®

Physical Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Chemistry

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 1261 - 1290 of 2388

Full-Text Articles in Physical Chemistry

Preparation And Characterization Of The Lani0.6Fe0.4O3-δ Cathode For Intermediate Temperature Solid Oxide Fuel Cell, Hang Liu, Bo Huang, Xin-Jian Zhu Nov 2011

Preparation And Characterization Of The Lani0.6Fe0.4O3-δ Cathode For Intermediate Temperature Solid Oxide Fuel Cell, Hang Liu, Bo Huang, Xin-Jian Zhu

Journal of Electrochemistry

The LaNi0.6Fe0.4O3-δ as cathode material for intermediate temperature solid oxide fuel cell was prepared using a combustion synthesis technique. The X-ray diffraction (XRD) pattern showed that the single-phase LaNi0.6Fe0.4O3-δ perovskite could be obtained after heat treatment at 600°C. The TEM and SEM images of the synthesized powders revealed that the grains were 50-100nm. According to the electrochemical impedance spectra (EIS), the polarization resistance of the symmetric cell LaNi0.6Fe0.4O3-δ/ScSZ/LaNi0.6Fe0.4O3-δ sintered at 1050°C was the smallest (0.70Ω·cm2, 0.27Ω·cm2 …

Go to article

Preparation And Application Of Macroporous Ato/Sio2 Electrode In Electrochemical Degradation Of 4-Chlorophenol, Zhang-Lin Chai, Rui-Feng Zhang, Tong-Hu Xiao, Yun-Xiao Liang Nov 2011

Preparation And Application Of Macroporous Ato/Sio2 Electrode In Electrochemical Degradation Of 4-Chlorophenol, Zhang-Lin Chai, Rui-Feng Zhang, Tong-Hu Xiao, Yun-Xiao Liang

Journal of Electrochemistry

The macroporous ATO/SiO2 materials were prepared through multiple steps of hydrolysis deposition in ethylene glycol and acetonitrile mixed solutions of SnCl2/SbCl3 and subsequent calcination at high temperature. The structures of the obtained materials were characterized by means of SEM and XRD. The results showed that the nano-ATO chemically deposited on the SiO2 support underwent well-controlled aggregation and recrystallization to form a sandwich structure (ATO-SiO2-ATO). Through four times loading of ATO the volume resistivity and the specific surface area reached 10·cm and 77 m2·g-1, respectively. The oxygen evolution potential on …

Go to article

Dynamic Modeling And Characteristic Analysis Of Proton Exchange Membrane Fuel Cell, Qiu-Hong Jia, Ming Han, Bin Deng, Cai-Zhi Zhang Nov 2011

Dynamic Modeling And Characteristic Analysis Of Proton Exchange Membrane Fuel Cell, Qiu-Hong Jia, Ming Han, Bin Deng, Cai-Zhi Zhang

Journal of Electrochemistry

In this paper, a dynamic model of PEMFC is developed to estimate the dynamic performance of PEMFC by analyzing in detail the influence factors of voltage of PEMFC including various losses. The partial pressure of hydrogen and oxygen is obtained using the differential form of the ideal-gas equation in this model. The steady-state model is obtained by setting reasonable parameter values. The simulation results and experimental results have good consistency, which shows that the simulation model is correct, reasonable and effective. It analyzed the dynamic response characteristics of the output voltage and the partial pressure of hydrogen in condition of …

Go to article

Preparation And Capacitance Characteristics Of Nickel Oxide Electrode With Mesh-Like Structure, Hui Xu, Zhen-Jun Peng, Dong-Hong Guo, Jun-Ling Li Nov 2011

Preparation And Capacitance Characteristics Of Nickel Oxide Electrode With Mesh-Like Structure, Hui Xu, Zhen-Jun Peng, Dong-Hong Guo, Jun-Ling Li

Journal of Electrochemistry

The mesh-like structure of NiO electrode was obtained by first preparing the precursors via hydrothermal process using nickel sulfate and carbamide as reactants, sodium hexametaphosphate as a surfactant, and followed by calcination of the precursors at 400 ℃. The structure, morphology and capacitance characteristics of NiO electrode were characterized by XRD, SEM and constant current charge-discharge testing techniques. The effects of hydrothermal temperatures on the electrochemical properties of NiO electrode were investigated. The results showed that the better property of nickel oxide was obtained when the mole ratio of nickel to urea was 1:4 and the hydrothermal temperature was 140℃. …

Go to article

A Brief Review Of Research Progress In The Development Of Engineering Models For Lithium Ion Batteries, Da-Wei Wang, Dong-Jiang Li, Jun Li, Yong Yang Nov 2011

A Brief Review Of Research Progress In The Development Of Engineering Models For Lithium Ion Batteries, Da-Wei Wang, Dong-Jiang Li, Jun Li, Yong Yang

Journal of Electrochemistry

Lithium ion battery has become an important and popular electrochemical device for energy storage.Suitable evaluation and understanding of electrochemical performance and state of charge play a key role in the applications of lithium ion batteries.Construction and utilization of engineering modeling for lithium ion batteries is an effective way to fulfill this target.In this paper,engineering models of lithium ion batteries based on electrochemical reaction,ionic diffusion and migration are introduced.The emphasis is placed on the development of engineering models by the introduction of side reaction,phase transition,stress and energy.The applications of engineering models in such simulations as charge-discharge,concentration distribution,current distribution,state of charge,stress and …

Go to article

Electroless Plating Silver Without Pd Activation On Polyamide Fabrics And Its Properties, Yun Meng, Ya-Ping Zhao, Zai-Sheng Cai Nov 2011

Electroless Plating Silver Without Pd Activation On Polyamide Fabrics And Its Properties, Yun Meng, Ya-Ping Zhao, Zai-Sheng Cai

Journal of Electrochemistry

Silver was deposited on the surface of polyaniline coated polyamide fabrics by electroless plating without using conventional palladium chloride solution as activator．Effects of electroless plating conditions such as the concentrations of silver nitrate, reducing agent glucose, complexing agent ammonium hydroxide, sodium hydroxide in the bath, as well as the depositing time and bath temperature on the rate of metal deposition and the square resistance were studied. Optimum electroless plating conditions were: 30℃, 50 min, with silver nitrate 12 g/L, ammonium hydroxide 100 ml/L, glucose 2.8 g/L, sodium hydroxide 8 g/L. Meanwhile, effects of the intermediate polyaniline layer on the metal …

Go to article

Superhydrophilic/Superhydrophobic Surface Constructions On Titanium And Their Effects On Anti-Bacterial Properties, Guo-Wei Wang, Qiao-Ling Huang, Ren Hu, Chang-Jian Lin, Hao Wang, Li-Hai Zhang, Pei-Fu Tang Nov 2011

Superhydrophilic/Superhydrophobic Surface Constructions On Titanium And Their Effects On Anti-Bacterial Properties, Guo-Wei Wang, Qiao-Ling Huang, Ren Hu, Chang-Jian Lin, Hao Wang, Li-Hai Zhang, Pei-Fu Tang

Journal of Electrochemistry

The microbial infection of biomaterials often causes clinic problems and sometimes even leads to the prosthesis failure. It is, therefore, important to prevent the biomaterials from bacterial contamination. This can be done by using anti-bacteria drugs. However, this method causes physiological burdens to the patients and does not always work. To stop the contamination from the just beginning is believed to be a better choice. The first step for infection is the attachment of bacteria on the material. In this work, the thin TiO2 nanotubes array films were constructed with totally different wettabilities showing either superhydrophobic or superhydrophilic. The …

Go to article

The Electrochemical Properties Of Cathode Materials LimXV3-XO8, Hui Yang, Gang-Gang Zhao, Juan Li Nov 2011

The Electrochemical Properties Of Cathode Materials LimXV3-XO8, Hui Yang, Gang-Gang Zhao, Juan Li

Journal of Electrochemistry

The cathode material of LiMxV3-xO8 was fabricated by sol-gel method using citric acid as a chelating agent and doping transition metal ions M (Mn, Ti, Co and Ni). The structure, morphology and electrochemical proprieties of the LiMxV3-xO8 samples were investigated by XRD, TGA/DTA, SEM, charge-discharge and CV measurements. The results showed that different calcining temperatures result in different structures and morphologies, which lead to different discharge capacities. The specific discharge capacity of the sample calcined at 500℃ for 6 h was up to 300.4 mAh/g in the first cycle, and the capacity decreased with the …

Go to article

Electrocatalytic Determination Of 15 Kinds Of Phenolic Compounds By Novel Gold Nanoparticles-Modified Glassy Carbon Electrode, Yan-Ping Cui, Wei-Xing Wang, Chang-Zhu Yang, Wen-Hong Pu Nov 2011

Electrocatalytic Determination Of 15 Kinds Of Phenolic Compounds By Novel Gold Nanoparticles-Modified Glassy Carbon Electrode, Yan-Ping Cui, Wei-Xing Wang, Chang-Zhu Yang, Wen-Hong Pu

Journal of Electrochemistry

A gold nanoparticles modified glassy carbon electrode (Au/GCE) was used to detect 15 kinds of phenolic compounds. In the cyclic voltammetry measurements, the peak currents of phenolic compounds at Au/GCE were all increased as compared with GCE and planar gold electrodes, and the oxidation potentials were determined by the activity of analytes. Besides, electrocatalysis of salicylic acid was studied at Au/GCE. The results showed that, there was a good linear relationship between the oxidation current and the concentration of salicylic acid, and the current sensitivity was 1.8 fold higher than that obtained on GCE. Trace phenolic compounds determination could be …

Go to article

Electrochemical Properties Of Tungstogermanate And Electrocatalysis Of H2O2 On Gew11Co/P-Opd/Gc Electrode, Li-Li Zhu, Jian-Ying Qu, Jue Wang, Hao-Yue Feng Nov 2011

Electrochemical Properties Of Tungstogermanate And Electrocatalysis Of H2O2 On Gew11Co/P-Opd/Gc Electrode, Li-Li Zhu, Jian-Ying Qu, Jue Wang, Hao-Yue Feng

Journal of Electrochemistry

The electrochemical properties of Co-substituted trimeric tungstogermanate containing Keggin fragments were studied. Cyclic voltammograms revealed two couples of reversible redox peaks on glassy carbon (GC) electrode in acid solutions. They corresponded to two-electron reductions accompanying by the additions of four protons and three protons, respectively, both were controlled by adsorption. The differences in the peak potentials of 2-electron-4-proton and 2-electron-3-proton reactions were 31 mV and 35 mV, respectively..Furthermore, the tungstogermanate (GeW11Co) modified GC electrode with functionalization by poly(o-phenylenediamine) (P-oPD) was prepared readily by electropolymerization. The GeW11Co/P-oPD/GC electrode could electrocatalyze the reduction of hydrogen peroxide, which showed good stability and quick …

Go to article

Electrochemical Studies On Surface Inclusion Of Β-Cyclodextrin With Adriamycin, Jian Shi, Qi-Ping Zhang, Nan-Ping Wang Nov 2011

Electrochemical Studies On Surface Inclusion Of Β-Cyclodextrin With Adriamycin, Jian Shi, Qi-Ping Zhang, Nan-Ping Wang

Journal of Electrochemistry

The β-cyclodextrin (β-CD) modified gold electrode (β-CD/Au) was fabricated to study the electrochemical behavior of adriamycin (ADM). The results indicated that the complexing reaction of ADM with β-CD took place at the β-CD/Au surface. At 25 °C, the complexing constant (K) was 9.54×104 L·mol-1 in pH=7.0. The K values changed regularly with temperature, and the most suitable temperature of the surface inclusion reaction was 30 ℃. The complexing reaction of ADM with β-CD at the β-CD/Au surface could undergo the quasi-reversible electrochemical reaction with the rate constant being 0.0995 s-1. The cathodic peak current (Ip) of …

Go to article

Indirect Electrochemical Reduction And Cotton Dyeing Process In Fe(Ⅲ)-Oxalate-Calcium Gluconate System, Qing-Zhi Wang, Wei Wang Nov 2011

Indirect Electrochemical Reduction And Cotton Dyeing Process In Fe(Ⅲ)-Oxalate-Calcium Gluconate System, Qing-Zhi Wang, Wei Wang

Journal of Electrochemistry

The electrochemical behavior and possible reaction mechanism in Fe(Ⅲ)-oxalate-calcium gluconate system were studied by cyclic voltammetry. The results showed that Fe(Ⅱ)-gluconate was the final reductant. The reduction time, the working voltage and the cathode area influenced the current efficiency. The high current efficiency of 89% for the indirect electrochemical reduction of Vat Scarlet R could be achieved with reduction time of 10 min, working voltage of 4 V and cathode area of 40 cm2 in Fe(Ⅲ)-oxalate-calcium gluconate system.

Go to article

Electrochemical Behaviors Of Hydroquinone On Polypyrrole/Stab-Nammt/Gc Electrode, Rong Li, Jian Xiong, Wei-Qiong Zhu, Yuan-Yuan Han, Jin Xu, Xiao-Ying He Nov 2011

Electrochemical Behaviors Of Hydroquinone On Polypyrrole/Stab-Nammt/Gc Electrode, Rong Li, Jian Xiong, Wei-Qiong Zhu, Yuan-Yuan Han, Jin Xu, Xiao-Ying He

Journal of Electrochemistry

The PPy/STAB-MMT/GC electrode was made using montmorillonite modified by STAB and polypyrrole (PPy). The electrochemical behaviors of hydroquinone on the PPy/STAB-MMT/GC electrode were researched by cyclic voltammetry and square wave stripping voltammetry (SWSV). The results showed that the electrode reaction occurred on the hydroquinone electrode was controlled by diffusion in PBS (pH=6.0). The number of electron transfer was equal to the number of protons (n=m=1) with the effective area of PPy/STAB-MMT/GC electrode Aeff=0.031 cm2. Under the optimized conditions, the linear response of peak current in SWSV with the concentration of hydroquinone in a range of 8.0×10-6~8.0×10 …

Go to article

Preparation And Characterization Of A Composite Of Gold Nanoparticles And Single-Walled Carbon Nanotubes And Its Potential For Heterogeneous Catalysis, Anne Shanahan, James Sullivan, Mary Mcnamara, Hugh Byrne Oct 2011

Preparation And Characterization Of A Composite Of Gold Nanoparticles And Single-Walled Carbon Nanotubes And Its Potential For Heterogeneous Catalysis, Anne Shanahan, James Sullivan, Mary Mcnamara, Hugh Byrne

Articles

A single-walled carbon nanotube-supported gold nanoparticle composite was prepared and characterized by X-ray diffraction, scanning transmission electron microscopy/scanning electron microscopy/transmission electron microscopy, energy-dispersive X-ray analysis, atomic absorption spectroscopy, nitrogen adsorption, Raman spectroscopy, and ultraviolet-visible spectroscopy. The Au particles were found to be crystalline, with a well-defined and narrow particle-size distribution, centered around 7 nm. The activity and selectivity of the composite for solventless aerobic oxidation of a secondary alcohol were examined, and a conversion efficiency of 95% was obtained.

Go to article

Study On Residual Powders Of Lithium-Ion Batteries With Different Voltages After Explosion, He Li, Zhi-Kui Chen, Ji-Na Cao, Guang-Chuan Liang Aug 2011

Study On Residual Powders Of Lithium-Ion Batteries With Different Voltages After Explosion, He Li, Zhi-Kui Chen, Ji-Na Cao, Guang-Chuan Liang

Journal of Electrochemistry

The residual powders of lithium-ion batteries at different voltages after explosion were obtained by using the battery impact testing machine. And these powders have been investigated by weighing, water solution and X-ray diffraction (XRD). The results showed that the integrity status of copper current collector and weight of residual powders decreased gradually with increasing of battery voltage, rising of burning temperature and releasing of burning duration time. The residual powders could be separated to insoluble powders and soluble powders by the water solution. The proportion of the insoluble powders is more (about 90%) including C, Co and CoO, while the …

Go to article

Development Of Dehydrogenase-Based Bioanode Using Poly(Phenosafranin)-Functionalized Swcnt Nanocomposites And Its Application To Ethanol Biosensor, S. Saleh Farhana, Okajima Takeyoshi, Lanqun Mao, Takeo Ohsaka Aug 2011

Development Of Dehydrogenase-Based Bioanode Using Poly(Phenosafranin)-Functionalized Swcnt Nanocomposites And Its Application To Ethanol Biosensor, S. Saleh Farhana, Okajima Takeyoshi, Lanqun Mao, Takeo Ohsaka

Journal of Electrochemistry

A New type of dehydrogenase-based amperometric ethanol biosensor was constructed using alcohol dehydrogenase (ADH) which was immobilized on the edge-plane pyrolytic graphite (EPPG) electrode modified with poly(phenosafranin)-functionalized single-walled carbon nanotube (PPS-SWCNT). The PPS-SWCNT modified EPPG electrode was prepared by electropolymerization of phenosafranin on the EPPG electrode which was previously coated with SWCNT. The performance of the ADH/PPS-SWCNT/EPPG electrode was evaluated using cyclic voltammetry and amperometry in the presence of ethanol. The fabricated ethanol biosensor provided a reasonable sensitivity of 2.0 μA cm–2 mM–1 and a low detection limit (36 μM) for the electrocatalytic oxidation of ethanol with a linear concentration …

Go to article

Surface Diffusion Of Adsorptive Species On Gold Nanoelectrodes, Bao-Fa Su, Wei Wang, Dong-Ping Zhan, Bin Ren, Zhong-Qun Tian Aug 2011

Surface Diffusion Of Adsorptive Species On Gold Nanoelectrodes, Bao-Fa Su, Wei Wang, Dong-Ping Zhan, Bin Ren, Zhong-Qun Tian

Journal of Electrochemistry

Gold nanoelectrodes were prepared successfully by a programmed laser puller. The Faraday adsorptions of oxygen and iodine, and the underpotential deposition of lead on the gold nanoelectrodes were investigated. The results showed that the active areas of nanoelectrodes were dramatically higher than their appearant geometry areas, which is caused by the surface diffusion of adsorptive species from the nanoscale gold/electrolyte interface to the adjacent gold surface.

Go to article

Preparations And Characters For Acetamiprid Of Molecular Imprinted Polymer Electrochemical Sensors, Bin Liu, Yong-Xing Huang, Hui-Ting Lian, Hong-Mei Wu Aug 2011

Preparations And Characters For Acetamiprid Of Molecular Imprinted Polymer Electrochemical Sensors, Bin Liu, Yong-Xing Huang, Hui-Ting Lian, Hong-Mei Wu

Journal of Electrochemistry

A novel molecularly imprinted membranes electrochemical sensor with good memory capacity to acetamiprid was developed. Based on electrodeposition technique, chitosan was deposited onto the surface of gold electrode as a functional polymer matrix along with aimed molecules acetamiprid and glutaraldehyde as a crosslinking agent. Cationic probe Ru(NH3)6Cl3 was employed to indirectly investigate the electrochemical characteristics as well as the imprinted effect of the sensors. The results showed that the sensors had a specific recognition to acetamiprid compared to the structural similarity midacloprid and other pesticide. There is more sensitive response to acetamiprid at imprinted sensors …

Go to article

Electrochemical Performance Of Tin Dioxide/Carbon Xerogel Composites As Anode Materials For Lithium-Ion Batteries, Xiao-Jing Liu, Lin-Lin Qin, Yi-Ning Shi, Ming-Sen Zheng, Quan-Feng Dong Aug 2011

Electrochemical Performance Of Tin Dioxide/Carbon Xerogel Composites As Anode Materials For Lithium-Ion Batteries, Xiao-Jing Liu, Lin-Lin Qin, Yi-Ning Shi, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

The tin dioxide/carbon xerogel composites were synthesized by using vacuum infiltration method. Structural characterization and morphology of the composites were investigated by using XRD, TEM and SEM techniques. BET test was performed to determine the pore size distributions of carbon xerogels and the composites. The results showed that the nano-sized SnO2 particles (5~10 nm) were encapsulated in the pores of carbon xerogels. During the electrochemical tests the SnO2 in the composites exhibited capacity retention of 61.9% after 100 cycles of charge-discharge tests at 100 mA/g.

Go to article

Electrochemical Analysis Based On Molecular Recognition Of Nucleic Acids And Its Applications, Dian-Ming Zhou, Jian-Hui Jiang, Guo-Li Shen, Ru-Qin Yu Aug 2011

Electrochemical Analysis Based On Molecular Recognition Of Nucleic Acids And Its Applications, Dian-Ming Zhou, Jian-Hui Jiang, Guo-Li Shen, Ru-Qin Yu

Journal of Electrochemistry

Nucleic acid as the carrier of genetic information and the functional molecules for molecular biology and bioanalytical chemistry has attracted increasing interest in electrochemical analysis. This review presents a brief outline of some electrochemical analytical assays based on molecular recognition of nucleic acids. Most of these methods are focused on the detection of nucleic acid sequence, genetic mutation and nucleic acids as functional molecules.

Go to article

Study On The Fluorescent Carbon Nanodots With Electrochemical Methods, Bao-Ping Qi, Yan-Min Long, Lei Bao, Cui Liu, Zhi-Ling Zhang, Dai-Wen Pang Aug 2011

Study On The Fluorescent Carbon Nanodots With Electrochemical Methods, Bao-Ping Qi, Yan-Min Long, Lei Bao, Cui Liu, Zhi-Ling Zhang, Dai-Wen Pang

Journal of Electrochemistry

Carbon nanodots are a new class of fluorescent nanoparticles with a carbon-based core, which possess wavelength-tunable luminescence, high photostability, resistance to photobleaching, water-solubility, and ease of bioconjugation. Owing to their attractive merits, carbon nanodots like other carbon nanomaterials such as fullerene, carbon nanotubes and graphene, have attracted much attention. In addition, carbon nanodots can be inexpensively produced by electrochemical methods with simple post-processing under mild conditions. Electrochemical approaches have unique advantages in the analysis of surface structures and luminescence mechanism of materials. In this review, recent advances in electrochemical methods used for the synthesis and luminescence mechanism of fluorescent carbon …

Go to article

Fabrication Of Ito Micro-Pore Electrochemical Sensor And The Detection Of Exocytosis, Hui Zhao, Ling Li, Pin-Gang He, Yu-Zhi Fang Aug 2011

Fabrication Of Ito Micro-Pore Electrochemical Sensor And The Detection Of Exocytosis, Hui Zhao, Ling Li, Pin-Gang He, Yu-Zhi Fang

Journal of Electrochemistry

Exocytosis is one of the major means for cells to transmit messages. Amperometric detection of exocytosis is an important method in studying communication between cells. In this study a new type of ITO micro-pore electrochemical sensor was fabricated by means of ITO and UV light lithographic mask and was used in the detection of exocytosis with promising results. Compared with the conventional method, the ITO micro-pore sensor can not only replace the carbon fiber electrode, but be combined with fluorescent or chemiluminescent methods in detecting the physiological phenomena of cells.

Go to article

Study On The Electrochemical Behaviors Of Gc Electrode Modified With Carbon Nanotube-Polyelectrolytes And Its Application For Rutin Detection, Liang Hua, Xia-Qin Wu, Rong Wang Aug 2011

Study On The Electrochemical Behaviors Of Gc Electrode Modified With Carbon Nanotube-Polyelectrolytes And Its Application For Rutin Detection, Liang Hua, Xia-Qin Wu, Rong Wang

Journal of Electrochemistry

The electrochemical behaviors of rutin and ascorbic acid at single-wall carbon nanotube and polyelectrolytes (dimethyl-diallylammonium chloride, PDDA) film modified glassy carbon electrode was investigated. The cyclic voltammetric results showed that electron transfer of rutin at PDDA/SWCNTs/GC modified electrode is an adsorption-controlled process. The separation of oxidation peak potentials of rutin and ascorbic acid was more than 200 mV. The rutin concentration in the presence of AA were detected by differential pulse voltammetry (DPV). The experimental results indicated that the PDDA/SWCNTs/GC modified electrode can be used for the detection of rutin in the presence of high concentration of AA. The DPV …

Go to article

Brief Introduction To Metal Corrosion And Protection, Hou-Yi Ma, Cong-Ying Cui, Ting Chen Aug 2011

Brief Introduction To Metal Corrosion And Protection, Hou-Yi Ma, Cong-Ying Cui, Ting Chen

Journal of Electrochemistry

This paper explains why corrosion processes are usually electrochemical in nature, describes the significance of electrochemical kinetic parameters of corrosion process, and briefly introduces the principles of corrosion protection, the most common corrosion protection methods and some special application of corrosion processes.

Go to article

Effects Of Graphene On Electrochemical Behaviors Of Ni(Oh)2 As Supercapacitor Material, Zhen-Zhen Zhao, Wen-Bin Ni, Neng-Yue Gao, Hong-Bo Wang, Jian-Wei Zhao Aug 2011

Effects Of Graphene On Electrochemical Behaviors Of Ni(Oh)2 As Supercapacitor Material, Zhen-Zhen Zhao, Wen-Bin Ni, Neng-Yue Gao, Hong-Bo Wang, Jian-Wei Zhao

Journal of Electrochemistry

The enhanced electrochemical properties of Ni(OH)2 by the oxidation defected graphene were studied by both experimental method and theoretical calculation. The composite material of nano-Ni(OH)2/graphene was prepared by potentiostatic deposition on the graphene substrate. Observed by TEM, the Ni(OH)2 nanoparticles were well dispersed on the graphene substrate with the diameter of 5.0±0.5 nm. The capacitance of the system measured by the electrochemical test was 1928 F·g-1. As indicated by the theoretical calculations, the composite material becomes conductive since Ni(OH)2 is combined with surface functional groups of the graphene through the strong chemical interaction. …

Go to article

Synthesis Of Limnpo4/C Used As Cathode Material For Lithium Ion Batteries, Xin Yang, Xue-Wu Liu, Gui-Chang Liu, Zhi-Cong Shi, Xin Li, Guo-Hua Chen Aug 2011

Synthesis Of Limnpo4/C Used As Cathode Material For Lithium Ion Batteries, Xin Yang, Xue-Wu Liu, Gui-Chang Liu, Zhi-Cong Shi, Xin Li, Guo-Hua Chen

Journal of Electrochemistry

The LiMnPO4/C composites were prepared using a solid-state reaction with addition of the resorcinol formaldehyde resin as the carbon source. The effects of reaction temperature and time on the crystal structure, morphology and electrochemical properties of the LiMnPO4/C composites were investigated. The results show that the best performance was achieved with the LiMnPO4/C composites synthesized at 600 oC for 12 h which had the particle sizes about 100~200 nm. The initial discharge capacities were 121.6 mAh·g-1 at 0.02C, 110 mAh·g-1 at 0.1C and more than 60 mAh·g-1 at 1C. An …

Go to article

Photogenerated Cathodic Protection Of Stainless Steel, Cheng-Gang Lin, Ze-Quan Lin, Jing Li, Chang-Jian Lin Aug 2011

Photogenerated Cathodic Protection Of Stainless Steel, Cheng-Gang Lin, Ze-Quan Lin, Jing Li, Chang-Jian Lin

Journal of Electrochemistry

A highly ordered Co-doped TiO2 nanotube layers were fabricated by potentiostatic anodization of pure titanium in fluorinated electrolyte solutions followed by ion-exchange method. The structure and composition of the as-prepared Co-doped TiO2 nanotube layers were characterized by SEM, XRD, UV-Vis, and XPS. The effects of dopant content on the morphologies, structural and photochemical properties of the TiO2 nanotube arrays were investigated. The performances of photogenerated cathodic protection and the photoelectrochemical response for the Co-doped TiO2 nanotube arrays under illumination and dark conditions were evaluated through the electrochemical measurements. The Co-doped TiO2 nanotubes showed a stronger …

Go to article

Synthesis And Electrochemical Behaviors Of Li2Coxmn1-XSio4 As A Cathode Material For Lithium-Ion Batteries, Lin Wang, Dong-Ping Lv, Yong Yang Aug 2011

Synthesis And Electrochemical Behaviors Of Li2Coxmn1-XSio4 As A Cathode Material For Lithium-Ion Batteries, Lin Wang, Dong-Ping Lv, Yong Yang

Journal of Electrochemistry

We have successfully synthesized Li2CoxMn1-xSiO4/C (x=0, 0.1, 0.3, 0.5, 1)/C composites using hydrothermal assisted sol-gel process and ball-milling method. The results of X-ray diffraction show that the solid solutions of Li2CoxMn1-xSiO4 can be achieved when x≤0.3. The initial capacities increase from 70 mAh·g-1 of Li2MnSiO4/C to 105 mAh·g-1 of Li2Co0.3Mn0.7SiO4/C. Cyclic Voltammetry (CV) curves show that the replacement of Mn with Co can reduce the electrochemical polarization, making the insertion-extraction reaction …

Go to article

Corrosion Characteristics Of Galvanized Flat Steel For Power Grounding In Nacl Solution Medium, Yong Li, Gao-Lin Wu, Bang-Fei Deng, Ping Yang, Xue-Ming Li, Qing-Bin Zong Aug 2011

Corrosion Characteristics Of Galvanized Flat Steel For Power Grounding In Nacl Solution Medium, Yong Li, Gao-Lin Wu, Bang-Fei Deng, Ping Yang, Xue-Ming Li, Qing-Bin Zong

Journal of Electrochemistry

The corrosion behavior of power grounding galvanized flat steel was studied by polarization measurement, electrochemical impedance spectroscopy and neutral salt spray test in 5% NaCl solutions. The surface morphologies of galvanized coating and structural properties of corrosion products were observed with scanning electron microscope and X-ray diffraction spectrometer, respectively. Results showed that under the temperatures of 20~60℃, the corrosion currents of galvanized flat steel increased with the temperature rising. The corrosion rate at 60℃ was 0.8408 mA·cm-2, which is 2.9 times larger than that at 20℃. The corrosion rate dropped after reaching the maximal value of 1.95 mg·cm …

Go to article

Electrelectrochemical Performances Of C-Coating And Co-Doping Lifepo4, Ying Bai, Jue-Ming Yang, Chun-Bo Qing, Wei-Feng Zhang Aug 2011

Electrelectrochemical Performances Of C-Coating And Co-Doping Lifepo4, Ying Bai, Jue-Ming Yang, Chun-Bo Qing, Wei-Feng Zhang

Journal of Electrochemistry

Phospho-olivine LiFePO4 cathode materials were prepared by hydrothermal reaction at 200 oC. Sucrose was added as C-coating resource and Co was doped into the crystal lattice of LiFePO4. In order to investigate the improvements in the electrochemical properties of Co-doped LiFePO4, three samples, LiFePO4, C-coated LiFePO4 and C-coating-Co-doped LiFePO4, were synthesized under the same preparation conditions. Charge/discharge studies reveal that the Co-doped LiFePO4/C composite annealed at 400 oC exhibits marked improvement of specific capacity by diminishing the particle sizes and enhancement in the degree of crystallinity. …

Go to article

First Prev Next Last