Inorganic Chemistry Commons^™

Tuning Ion Mobility And Molecular Confinement In High-Performance Polymer Electrolytes For Energy Storage, Ezzeldien Yousef Muhammed Yousef

Theses and Dissertations

This research addresses the critical energy density limitations of aqueous supercapacitors, which are traditionally constrained by the narrow electrochemical stability window (ESW) of water 1.23 V. By employing two distinct molecular engineering strategies, this study developed high-performance electrolyte systems that significantly extend voltage stability and thermal resilience.

The first system, CsBr@PAM/HA, utilizes a polyacrylamide and hyaluronic acid hydrogel matrix. This system exploits the chaotropic nature of Cs⁺ ions to disrupt the aqueous hydrogen-bonding network, enhancing ionic conductivity to 104 mS cm^-1. Through systematic salt screening, CsBr was identified as the optimal electrolyte, enabling a stable 2.0 V …

Thermally Induced Color Changes In Iron Oxide Containing Coatings, Tabatha Whitfield

Master's Theses

Wildland-urban interface (WUI) fires and residential conflagrations present significant challenges for post-fire damage and fire propagation analysis. CAL FIRE observed reddening in architectural coatings during the 2025 Pacific Palisades fire with no determination of the cause. While heat-induced color change of infrastructure coatings has been studied, its potential use as a thermal exposure indicator in residential fire events remains largely unexplored. The objective of this study was to characterize the heat-induced color change of yellow iron oxide containing coatings subjected to thermal exposures, replicating residential fire conditions. The coatings were applied to commonly used building materials and exposed to direct …

Engineering Silicone Magnetic Fluids For Localized Radiation Attenuation During Ocular Melanoma Brachytherapy, Zachary L. Caprow

All Dissertations

Ocular melanoma is commonly treated using plaque brachytherapy; however, radiation-induced damage to healthy ocular tissues frequently results in partial or complete vision loss. This work investigates the development of an injectable, magnetically responsive silicone magnetic fluid designed to localize adjacent to the tumor and attenuate low-energy gamma radiation during treatment.

The material system consists of iron oxide nanoparticles surface-functionalized with a siloxane polymer, in which the nanoparticles provide magnetic responsiveness and radiation attenuation, while the polymer coating ensures colloidal stability, injectability, and biocompatibility. A one-pot synthetic approach was developed wherein a functionalized siloxane polymer containing iron-affinitive groups was reacted with …

Targeting Chemical Pollutants Through Assimilation Of Hydrophobic Deep Eutectic Solvents With Metal-Organic Frameworks, Carbon Nanotubes, And Activated Carbon, Tanner William Baughman

ONU Student Research Colloquium

Water contamination by heavy metals has a harmful human threat to the environment and to human health. This is derived from their bioaccumulation and toxicity characteristics. The study directly looks at the assimilated of lignin-derived hydrophobic deep eutectic solvents (HDES) with 3 different class of materials: Metal-Organic Frameworks (MOFs), Carbon Nanotubes (CNTs), and Activated Carbon (AC). Four different HDES mixtures were assimilated into these porous materials through impregnation. Composites were evaluated by characteristic peaks through Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). The morphology of the samples was assessed as well through scanning electron microscopy (SEM). The colloidal stability …

Bio-Based Composites With Enhanced Mechanical Strength And Flame Retardancy, Riya Patel

Electronic Theses & Dissertations

Composites are versatile and useful in many fields, including aerospace, automotive, construction, and healthcare, due to their high mechanical strength. It is common practice to synthesize these materials using petroleum-based chemicals. Nonetheless, in the twenty-first century, scientists are more interested in using renewable resources to create composites. The greatest substitute for petroleum-based chemicals is vegetable oil. It has unsaturated double bonds that are modifiable chemically. In the present study, bio-polyol was synthesized using castor oil, an inedible vegetable oil. A ring-opening process was used to modify it and produce castor oil-based polyol. The synthesized castor oil-based polyol was characterized by …

Trade-Off Between Limonene & Geraniol-Based Reprocessable And Non-Reprocessable Epoxy Thermosets: Role Of Aliphatic Diamines In Polymer Networks Design, Priyankkumar Kanubhai Patel

Electronic Theses & Dissertations

The growing demand for sustainable materials, driven by environmental concerns and the rapid depletion of fossil fuels, has garnered significant attention in the fabrication of bio-based epoxy thermosets as renewable alternatives to petroleum-derived thermosetting polymers. The present study focuses on the synthesis and characterization of epoxy prepolymer resins derived from limonene and geraniol via a two-step process, followed by the fabrication of thermally cross-linked flexible epoxy thermoset films using various traditional aliphatic diamine curing agents, namely 1,2-ethylenediamine (EDA), 1,4-butylenediamine (BDA), and 1,6-hexamethylenediamine (HDA). Additionally, the incorporation of cystamine, a disulfide-containing diamine, enabled the formation of a covalent adaptable network through …

The Conservation Treatment And Technical Study Of Two Marisol Sculptures, Ruthie Rolfsmeyer

Art Conservation Master's Projects

ABCDEFG & Hi (1961-62) and Father Damien (1966-67) are both painted wooden sculptures created by Marisol during the height of her fame. Although Marisol is a well-known artist, whose fame has been rekindling since her death in 2016, there have been few technical studies of her works. Multimodal imaging and scientific analysis of these two sculptures provide insight into their structure and materials. Techniques include x-ray radiography, reflectance transformation imaging, x-ray fluorescence spectroscopy, Fourier transform infrared spectroscopy, and pyrolysis-gas chromatography-mass spectrometry. Key findings include the identification of toolmarks, nitrocellulose, alkyd, and acrylic paints, and a genuine diamond and pearl in …

Structure-Property Relationship Studies Of Electrically Conductive Metal-Organic Framework Materials, Shiyu Zhang

All Dissertations

Electrically conductive metal-organic frameworks (EC-MOFs) are among the most promising materials due to their tunable structures, properties, and diverse functions. However, the lack of comprehensive understanding of their structure-property relationship hinders the development of EC-MOFs. My dissertation focuses on the design, construction, and structure-property relationship studies of EC-MOFs.

Chapter 1 describes how MOFs' structural features and compositions affect the electronic properties and demonstrates conductive mechanisms and the corresponding design strategies to develop EC-MOFs.

Chapter 2 describes the synthesis, characterization, electronic and optical properties of four novel alkali-metal-based (Na, K, Rb, and Cs) 3D-MOFs with continuous tetrathiafulvalene tetracarboxylate (TTFTC) π-stacks, systematicly …

Use Of Interlaboratory Studies For The Development Of Consensus-Based Criteria For The Elemental Analysis Of Electrical Tapes, Lacey M. Leatherland

Graduate Theses, Dissertations, and Problem Reports (ETD)

Tape evidence is often used in criminal cases involving violent crimes, kidnappings, improvised explosive devices (IEDs), and drug trafficking. This evidence can reveal potential links between suspects, items, or scenes. The forensic examination of electrical tape can provide investigative leads or offer support to alternative hypotheses evaluated in the courtroom. A conventional analytical scheme includes microscopic examination, Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy Energy Dispersive Spectrometry (SEM-EDS), and Pyrolysis Gas Chromatography Mass Spectrometry (Py-GC/MS). Elemental analysis of electrical tapes is commonly achieved using SEM-EDS; however, recent scientific literature suggests that this analysis can evolve from using SEM-EDS to …

Optimization Of Transition-Metal Inclusive Carbon Aerogels For Electrochemical Energy Applications, Allen Dalton Davis

Electronic Theses & Dissertations

The ever-growing need for energy alongside rising concerns for climate change demands the development of renewable energy technologies. Hydrogen fuel cells are a promising technology that can serve to either supplement energy generation or act as a lone power source. Yet for these devices to be truly green, the hydrogen that serves as fuel must be procured from a renewable resource. Electrolytic water splitting is a process that allows for the dissociation of water into H₂ and O₂. For this process to be practical, the electrolyzer needs to demonstrate high efficiency and stability, as well as a …

Exploring Soybean Oil-Based Polyol And Effect Of Non-Halogenated Flame Retardants In Rigid Polyurethane Foam, Sahithi Kondaveeti

Electronic Theses & Dissertations

To address the increasing demand for sustainable biomaterials due to the depletion of fossil fuel resources and growing environmental concerns, a new type of biodegradable and environmentally friendly rigid polyurethane foam (RPUF) has been synthesized. These foams are derived from chemically modified soybean oil-based polyol obtained from soybean oil by epoxidation followed by a ring-opening reaction. Polyurethane foam is generally used in construction, furniture, and automobile industries but is highly flammable and releases toxic gases and smoke during combustion. In this study, a highly efficient synergistic effect halogen-free flame-retardant (FR) melamine salt, 2-carboxyethyl(phenyl)phosphinic acid melamine salt (CMA) was synthesized from …

Enhanced Mechanical Strength Of Soybean Oil-Based Non-Isocyanate Polyurethane Adhesive For Wood Application By Introducing Nanofillers, Vatsal Chaudhari

Electronic Theses & Dissertations

Polyurethane (PU) is a versatile material that finds extensive use in various industries including bedding, construction, automotive, and packaging. Historically, this particular polymer relied significantly on petrochemical resources, a practice that was considered to have negative environmental impacts. The conventional method for preparing PU involves the use of isocyanate, which is a disadvantage due to its negative impact on the environment and human health. The resolution of this problem entails identifying an appropriate substitute for petroleum-derived products that minimize their impact on both the environment and human health. The researchers earlier utilized soybean oil, for the formulation of PUs in …

Castor Oil Polyol-Based Adhesives With Additional Crosslinker For Improvement In Mechanical And Thermal Properties., Yash Desai

Electronic Theses & Dissertations

Polyurethanes (PU) have been promising polymeric materials with many applications, including adhesives. Projecting an estimated revenue from 42.8 billion $ in 2021 to 61.5 billion $ by 2026. However, a large number of PU adhesives are sourced from petroleum products. Therefore, to lower the dependence on non-renewable resources and provide sustainable and affordable alternatives. In this work will synthesize bio-based adhesives of polyurethane from modified castor oil-based polyol. Generally, polyurethane reaction depends on the properties of polyol and isocyanates. The most important aspect of these reactions is the OH number of the polyol, which is responsible for the crosslinking and …

Testing Different Approaches For The Stabilization Of Mdi: Design Of Low-Valent Molybdenum Complexes In Redox-Active Environments And Capture-Release Reactions Using N-Heterocyclic Carbenes, Asanka Indrajith Dissanayake

Wayne State University Dissertations

Methylene diphenyl diisocyanate (4,4’-MDI) is an aromatic diisocyanate, which is widely used as a monomer in the polyurethane industry. One of the main challenges with using 4,4’-MDI is its dimerization into uretdione. The polyurethane industry seeks solutions that could suppress dimerization of 4,4’-MDI and extend its shelf-life. The focus of this dissertation is on the design of chemical solutions to this problem including: (1) reversible coordination of MDI (heteroallene) to low-valent mono- or dimolybdenum complexes in redox-active ligand environment, and (2) reversible coordination of MDI with two equivalents of an appropriate N-heterocyclic carbene.

MDI (isocyanate) is a heteroallene, and heteroallenes …

Synthesis And Application Of Redox-Active Covalent Organic Frameworks In Rechargeable Batteries, Mohammad K. Shehab

Theses and Dissertations

Synthesis and Application of Redox-Active Covalent Organic Frameworks in Rechargeable Batteries

Mohammad K. Shehab

Department of Chemistry, Virginia Commonwealth University, Richmond, Virginia 23284, United States

Abstract

In recent years, lithium-ion batteries (LIBs) have been considered the dominant energy storage devices for portable electronics and electric vehicles due to their high energy density, low self-discharge rate, and long cycle life. In LIBs, the traditional positive electrodes employed are mainly derived from metal-containing inorganic compounds composed of cobalt, iron, nickel, or manganese (LiCoO₂, LiMn₂O₄, and LiFePO₄) coupled with graphite as the negative electrode. Despite …

Development Of An Effective Au:Pd Bimetallic Heterogeneous Catalyst For Oxidative Lignin Depolymerization To Low Molecular Weight Aromatics, Gayan P. Karunasinghe

Theses and Dissertations--Chemistry

The principal concept behind biorefining involves the transformation of lignocellulosic biomass into valuable products and energy resources. Historically, biorefinery strategies for lignocellulosic biomass have primarily focused on improving the conversion of cellulose into ethanol, often neglecting the underutilized lignin component. Lignin consists of phenolic subunits, from which it follows that value-added products can be obtained from lignin depolymerization. Unfortunately, lignin utilization is particularly challenging due to its high structural irregularity and recalcitrance. The goal of this study was to develop an AuPd/Li-Al layered double hydroxide (LDH) bimetallic catalyst for efficient lignin depolymerization, resulting in the production of high-value aromatic compounds. …

Analysis Of The Light Responsive Azobenzene Peptide Nucleic Acid Duplexes, Kat Nguyen

Honors College Theses

Peptide nucleic acids (PNAs) are oligonucleotide analogues in which the sugar-phosphate backbone has been replaced by a pseudopeptide skeleton. Since PNAs use the natural nucleobases (Adenine, Thymine, Cytosine, Uracil, and Guanine) found in either DNA and/or RNA, they are able to hybridize according to Watson-Crick base-pairing to form duplexes. PNA is a promising therapeutic agent because they can function as antigene or antisense chemical agents. To further enhance their utility, we aim to incorporate a photoswitchable moiety using azobenzene. Here, we report the results of the synthesis and purification of a photoswitchable 11 mer PNA along with initial characterization efforts.

Valorization Of Biopolymers And Biomass To Produce Materials For A More Circular Economy, Moira Lauer

All Dissertations

With a globally increasing population and largely unchecked consumption of raw materials, human society is on track for devastating consequences. Two industries responsible for utilizing massive amounts of raw materials and generating equally gargantuan quantities of waste are the packaging and infrastructure sectors. In 2017 in Europe, for example, packaging reached a record 173 kg of packaging waste per capita. One of the largest packaging consumers is the food industry, in which 40% of packaging is made of petroleum-derived single-use plastic, leading to a massive carbon imbalance. “The Built Environment,” on the other hand, is responsible for about 50% of …

Synthesis And Characterization Of Pyridine-Based Diimide Ligands And Metal Phosphonate Coordination Polymers, Juan L. Pinedo

Honors Program Theses and Research Projects

Coordination polymers have been a topic of interest because of the large variety of applications these materials have. in particular Metal-Organic Frameworks (MOFs) have been researched due to their porosity and simple synthetic pathways. Structurally a MOF is composed of one or more organic ligands serving as the backbone of the structure. These ligands are complexed with metal ions coordinating into the desired structure. It is this structure that gives way to a variable porosity useful for proton conductivity and material transport. By varying backbone size a framework can be customized for use in specific conditions. This is due not …

A Conductivity Analysis Of A Newly Synthesized Poly(Ethylene Glycol) Methyl Ether Hydroxide Electrolyte, Sarah Marie Peterson

Honors Theses

This thesis investigates the synthesis and conductive properties of a Poly (ethylene glycol) methyl ether-based polymer electrolyte. The goal of the synthesis is to enhance the hydroxide ion conduction properties of the polymer with its cationic groups attached. The MePEG backbone contained seven ethylene glycol groups and was modified to substitute the hydroxide group in the MePEG with trimethylamine. In addition, the bromide added in the synthesis was exchanged for hydroxide ions to allow for the transportation of hydroxide ions in polymeric electrolytes that can be used in Anion Exchange Membrane Fuel Cells. The newly synthesized polymer was compared to …

Multi-Level Analysis Of Atomic Layer Deposition Barrier Coatings On Additively Manufactured Plastics For High Vacuum Applications, Nupur Bihari

Dissertations, Master's Theses and Master's Reports

While hardware innovations in micro/nano electronics and photonics are heavily patented, the rise of the open-source movement has significantly shifted focus to the importance of obtaining low-cost, functional and easily modifiable research equipment. This thesis provides a foundation of open source development of equipment to aid in the micro/nano electronics and photonics fields.

First, the massive acceptance of the open source Arduino microcontroller has aided in the development of control systems with a wide variety of uses. Here it is used for the development of an open-source dual axis gimbal system. This system is used to characterize optoelectronic properties of …

Visualization Without Vision – How Blind And Visually Impaired Students And Researchers Engage With Molecular Structures, Croix J. Laconsay, Henry B. Wedler, Dean J. Tantillo

Journal of Science Education for Students with Disabilities

This article examines the tools and techniques currently available that enable blind and visually impaired (BVI) individuals to visualize three-dimensional objects used in learning chemistry concepts. How BVI individuals engage with and visualize molecular structure is discussed and recent tactile (or haptic) and auditory methods for visualization of various chemistry concepts are summarized. Remaining challenges for chemistry education researchers are described with the aim of highlighting the potential value of educational research in further enabling BVI students to pursue careers in science, technology, engineering, and mathematics (STEM) fields.

The Synthesis Of A Mepeg-Based Hydroxide Conducting Electrolyte And The Optimization Of The Mepeg-Tosylation Reaction, Andrew Ladner

Honors Theses

As society is becoming increasingly aware of the effects of climate change and the ever-looming threat of a fuel shortage, exploring green and renewable alternative energy production, such as fuel cells, is paramount. This project investigates the synthesis of a polyethylene glycol monomethyl ether (MePEG_n) based polymer as well as the optimization of the MePEG Tosylation reaction. The MePEG explored contains seven polymerized ethoxy groups (MePEG₇). The MePEG₇ polymer was modified by substituting a positively-charged trimethylamine group in the place of the alcohol functional group at the end of the PEG chain. The reason for …

Design Of Pigments For Use In “Cool” Coatings, Tyler Laughorn

Williams Honors College, Honors Research Projects

This project was focused on the development and testing of several novel pigments that exhibit high NIR-reflectance and therefore show potential for use in “cool” coatings. A “cool” coating will reflect more solar radiation than other standard coatings, and so a coated structure would require less energy to keep cool. Four sets of pigments were synthesized: Co_1-xMg_xCr₂O₄ (teal), Co_0.25Mg_0.75Cr_2-yAl_yO₄ (blue), Ti_1-x-yNi_xSb_yO₂ (yellow), and Cr_2-xFe_xO₃ (black). NIR and TSR values were then measured …

Hypervalent Iodine Compounds With Carboxylate And Tetrazolate Ligands, Avichal Vaish

Chemistry Theses and Dissertations

In modern organic chemistry, hypervalent (HV) iodine(III) compounds are frequently used as oxidizing agents but application of λ³-iodanes in polymer and material chemistry is still underexplored. This dissertation describes the preparation of dynamic and self-healing materials by employing ligand exchange reactions involving HV iodine(III) compounds of the type ArIL₂ (Ar = Aryl, L = ligand, e.g., carboxylate or (pseudo)halide). These compounds can undergo ligand exchange reactions in presence of nucleophiles (Nu^-) to form ArINu₂. Diacetoxyiodo benzene was successfully employed as a crosslinker to prepare dynamic and self-healing gels derived from carboxylate-containing polymers. Furthermore, …

Greening Of Catalytic Processes Using First-Row Transition Metals For Atom Transfer Radical Addition And Transfer Hydrogenation, Gabrielle Pros

Electronic Theses and Dissertations

This work focused on “greening” catalytic processes, atom transfer radical addition (ATRA), which adds an alkyl halide across and alkene, and transfer hydrogenation/dehydrogenation, which reduces a carbonyl without needing direct H₂ gas. Part of “greening” of these processes is through using abundant first row metals, Cu and Ni for catalysis. One aim was to design new ligands which would be more active in these systems; the second was investigation of additives for catalyst regeneration to reduce the catalyst loading necessary for high yields.

The TPMA^* family was investigated in ATRA. Rate constants followed the expected trend, which increased …

Synthesis And Characterization Of Multifunctional Transition Metal Oxide Nanoparticles Through A Modified Sol-Gel Method With Application In Energy Storage, Julien Lombardi

Dissertations, Theses, and Capstone Projects

The Synthesis of transition metal oxide nanoparticles has been studied in great detail over the many years. The most studied transition metal oxide nanoparticles are perovskites of the ABO₃ stoichiometry (A and B = transition metal) and more recently double perovskite crystal structures of the AA’BO₆ or A₂BB’O₆ stoichiometry due to the many different properties arising from the many different combinations of elements possible. These materials have proven potentially useful in many fields, but due to properties such as ferroelectricity and ferromagnetism, the desire to integrate these materials into electronics is ever growing. Many synthesis …

Organic-Inorganic Hybrid Composites: Superhydrophobic Polymer Coatings With Photoreactive Perfluorinated Phthalocyanines, Abdul Azeez

Seton Hall University Dissertations and Theses (ETDs)

ABSTRACT

We report partly fluorinated and silicon-based polymers that incorporate inorganic/organic materials capable of generating reactive oxygen species (ROS) using only visible light and air. Polyvinylidene fluoride (PVDF), which incorporated a known perfluorinated phthalocyanine photosensitizer, F₆₄PcZn, supported on silicon and titanium oxides was further modified via chemical surface roughening to exhibit enhanced hydrophobicity when used as a coating. Water contact angles as high as ~159° have been observed, vs. ~ 92° for the unmodified polymer. The polymer matrix, however, does not resist the ROS it produces as evidenced by spectroscopic and SEM data. A polysiloxane matrix was similarly …

Increased Utility Of Ph Sensitive Indicators As High Concentration Co2 Detectors Through The Use Of Polyelectrolyte Complexes As Stabilizing Media, Camden James Johnson

All Master's Theses

Development of plastic materials which produce visible color change when exposed to different environments has recently attracted attention for many biomedical applications.^1,2Many biomedical devices are packaged under high concentrations of carbon dioxide (CO₂) which can lower the pH of the packaging environment. This is similar to the CO₂ chemistry responsible for ocean acidification.³ Dye molecules that are sensitive to environmental changes in pH (known as pH indicators) can be encapsulated in plastics and produce a visible color change when a medical device is removed from the sterile CO₂ environment. Plastics made from large …

Stabilized, Hybrid Solid-State Photocatalysts For Water Purification: Preparation, Properties And Performance Under Visible Light Irradiation, Karpagavalli Ramji

Seton Hall University Dissertations and Theses (ETDs)

Stabilized heterogeneous photocatalysts that use only solar light and air have been prepared and successfully employed to decontaminate water from organic pollutants. Organic dye pollutants present, for example in textile effluents, are one of the major sources of water pollution owing to their limited biodegradability, toxicity and potential carcinogenic risks. Before certifying water for public consumption, reuse in industries or for discharge in surface water the organic pollutants must be degraded, an effort that is energy intensive and currently requires complex methodologies. We report solid-state photocatalysts that use only visible light and air to treat wastewater. Perfluoroalkyl perfluoro-substituted zinc phthalocyanine …