Inorganic Chemistry Commons^™

Polyhedral Oligomeric Silsesquioxane-Phosphate Glass Matrix Nanocomposites With Additional Chapter On Phosphate Glass-Poly(Ethylene Terephthalate) Matrix Composites, Kyoungtae Kim

Dissertations

Preparation and characterization of tin fluorophosphate glass (Pglass) matrix nanocomposites incorporating polyhedral oligomeric silsesquioxane (POSS) were investigated on the structural, thermal, morphological, mechanical, and rheological properties. Various processes including synthesis, extrusion and sintering processes were applied to prepare the nanocomposite samples. Another application of POSS with hydrophobic functional groups on the well-structured nanoscale silicate cage with three silanol groups was investigated to present the feasibility to use POSS molecule as a coating material on the surface of the hydrophilic inorganic glass. In addition, Poly(ethylene terephthalate) polymer matrix composites incorporating Pglass was studied to present the benefits of the Pglass with …

Sintering-Induced Nucleation And Growth Of Noble Metal Nanoparticles For Plasmonic Resonance Ceramic Color, Nathan Dinh, Michael C. Leopold, Ryan Coppage

Chemistry Faculty Publications

This study demonstrates the formation of nanoparticles (NPs) from metal salts within ceramic glazes, such that the use of this colorant technology is more accessible to artisans, employs less metal content, is less environmentally harmful, and allows for the use of traditional kilns. Gold NPs have been demonstrated to possess a specific, low material loading use as a ceramic glaze colorant via plasmon resonance. Pre-synthesized gold NPs that are added to ceramic glazes have been found to significantly change in size after firing in both reductive and oxidative atmospheres, but still maintain some size relationships and color properties. Unfortunately, it …

An Entirely New Molecular Glue For Mof Using Unusual Structural Transformation Of A Coordination Polymer, Sukwoo Jung, Hangyeol Kim, Junseok Ahn

The International Student Science Fair 2018

In this research, an entirely new molecular glue is reported. This ‘coordination polymer glue’ is synthesized from zinc metal and BDC-NPE(2,5-bis{4-[1-(4-nitrophenyl)ethylamino]butoxy}terephthalic acid). Molecular glue transforms from 1D coordination polymer to a 3D cross-linked framework, resulting in a phase change of solution to solid. The carboxylate group of this glue makes the preformed MOF bind to its framework. Therefore, when the solution of molecular glue is mixed with preformed MOF powder and heated, homogeneous and thin MOF film – MOF/ZnNPE film – is fabricated. The film is irrelevant to the kind of its substrate, and its thermal stability was enhanced in …

An Entirely New Molecular Glue For Mof Using Unusual Structural Transformation Of A Coordination Polymer, Sukwoo Jung, Hangyeol Kim, Junseok Ahn

The International Student Science Fair 2018

In this research, an entirely new molecular glue is reported. This ‘coordination polymer glue’ is synthesized from zinc metal and BDC-NPE(2,5-bis{4-[1-(4-nitrophenyl)ethylamino]butoxy}terephthalic acid). Molecular glue transforms from 1D coordination polymer to a 3D cross-linked framework, resulting in a phase change of solution to solid. The carboxylate group of this glue makes the preformed MOF bind to its framework. Therefore, when the solution of molecular glue is mixed with preformed MOF powder and heated, homogeneous and thin MOF film – MOF/ZnNPE film – is fabricated. The film is irrelevant to the kind of its substrate, and its thermal stability was enhanced in …

Synthesis Of A Silsesquioxane Based Supramolecular Polymer, Rachel Bianculli

Honors Projects

Research toward smart materials, specifically self-healing polymers, is an expanding topic within the materials science field. These materials rely heavily on dynamic crosslinking that is achieved by inducing different degrees of hydrogen bonding, van der Waals forces, etc. This work, demonstrated by research previously done within the Ostrowski research group, shows how coordination bonds of transition metals have been shown to create light activated, self-healing properties. Work done with these light-activated chromium (III) complexes with a poly(butylyene-co-ethylene) backbone have shown how metal—ligand coordination geometries can tune mechanical properties of the polymeric material. However, these materials suffer from being incredibly soft …

Synthesis Of Dimeric Zinc Complexes For Use As Ring Opening Polymerization Catalysts, Kyle D. Brooks, Arnlold Rheingold, David B. Green, Joe Fritsch

Seaver College Research And Scholarly Achievement Symposium

No abstract provided.

Synthesis And Characterization Of Mpims : Metallopolymers Of Intrinsic Microporosity, Kelly Walter

Legacy Theses & Dissertations (2009 - 2024)

Polymers of intrinsic microporosity (PIMs) are class of polymers known for high surface areas arising from their contorted and rigid backbone structures. While high surface area compounds are applicable in many fields, simultaneous solubility and conductivity in PIMs is still lacking. In general, the monomeric units that form the backbone, necessary to yield inefficient polymer strand packing and contortion, also break conjugation in the along the polymer backbone and therefore limit conductivity. It has been previously noted that extended conjugation and the addition of metal atoms (along the backbone) increases conductivity. We therefore sought to use a strategy whereby the …

Synthesis And Electrochemical Characterization Of Pani/Ni And Pani/Au/Ni Composites, Morgan Emily Pacini

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this research is to show that the electrochemically controlled formation of monometallic and bimetallic catalysts in polyaniline (PANI) can directly influence the efficiency and reproducibility of the catalytic oxidation of methanol. PANI is a conductive polymer that provides a three-dimensional template for the metallic catalysts deposition at nitrogen sites. The controlled deposition of metallic species can be achieved using the normal oxidation/reduction cycles of PANI. The deposition of metallic species relies on anion precursors that are electrostatically bound by the polymer during the oxidation cycle. The precursor is reduced directly at the nitrogen sites in the polymer …

Microwave-Assisted Topochemical Manipulation Of Layered Oxide Perovskites: From Inorganic Layered Oxides To Inorganic-Organic Hybrid Perovskites And Functionalized Metal-Oxide Nanosheets, Sara Akbarian-Tefaghi

LSU New Orleans Theses and Dissertations

Developing new materials with desired properties is a vital component of emerging technologies. Functional hybrid compounds make an important class of advanced materials that let us synergistically utilize the key features of the organic and inorganic counterparts in a single composite, providing a very strong tool to develop new materials with ”engineered” properties. The research presented here, summarizes efforts in the development of facile and efficient methods for the fabrication of three- and two-dimensional inorganic-organic hybrids based on layered oxide perovskites. Microwave radiation was exploited to rapidly fabricate and modify new and known materials. Despite the extensive utilization of microwaves …

Effects Of Processing Parameters On Properties Of Novel Silica-Filled Polysiloxane Materials, Kyle W. Schwenker

Electronic Theses & Dissertations

Polysiloxanes are a class of materials that possess high temperature stability and the ability to remain flexible at extremely low temperatures. Their elastomers generally exhibit low strength and have poor mechanical properties unless reinforced with fillers. Reinforcement can be accomplished by compounding reinforcing silica fillers with polysiloxanes via twin-screw extrusion compounding that vigorously mixes the fillers into a polymer matrix. In this thesis, a lab-scale twin-screw extruder was utilized to compound thermoplastic materials to determine the effects of processing on thermoplastics material properties, as well as to determine the extruder’s compounding effectiveness. Processing via lab-scale twin-screw extrusion did not negatively …

Organometallic Materials: Ferroceno[C]Thiophenes And 1,2-Bisthienylmetallocenes, Surya R. Banks

Theses and Dissertations--Chemistry

Development of synthetic routes toward two general organometallic frameworks was undertaken. The first project involved synthetic attempts of substituted and unsubstituted ferroceno[c]thiophene while the second one was the synthesis of 1,2-dithienylmetallocenes. The long-term goal of this work is to lay the foundations for study of electronic, electrochromic, redox, and optical properties of thiophene-based materials integrated with organometallic systems such as ferrocene, ruthenocene and cymantrene. The synthetic pathway for the target molecule in the first project involved converting 1,2-bis(hydroxymethyl)ferrocene to 1,2-bis(thiouroniummethyl)ferrocene with thiourea under acidic conditions. Refluxing the salt in base followed by acidification resulted in 1,2-bis(mercaptomethyl)ferrocene, which is …

Fabrication Of Multifunctional Nanostructured Porous Materials, Ahmed A. Farghaly

Theses and Dissertations

Nanostructured porous materials generally, and nanoporous noble metals specifically, have received considerable attention due to their superior chemical and physical properties over nanoparticles and bulk counterparts. This dissertation work aims to develop well-established strategies for the preparation of multifunctional nanostructured porous materials based on the combination of inorganic-chemistry, organic-chemistry and electrochemistry. The preparation strategies involved one or more of the following processes: sol-gel synthesis, co-electrodeposition, metal ions reduction, electropolymerization and dealloying or chemical etching. The study did not stop at the preparation limits but extended to investigate the reaction mechanism behind the formation of these multifunctional nanoporous structures in order …

Study Of Mechanical Properties Of Pva Fiber-Reinforced Concrete With Raman Spectroscopic Analysis, Ramyasree Annam

Masters Theses & Specialist Projects

The brittleness of concrete has always been a safety and economic issue of great concern. The low tensile strength of concrete is the cause of its intrinsic brittle nature. This is critical considering the amount of concrete used for the construction of highways, buildings, and other facilities. The mechanical properties of concrete must be improved to provide upgraded construction. Crack resistant and durable concrete has always been a major goal for engineers. Many approaches have been tried to make concrete a better construction material. Fiber reinforcement is an approach which has been shown to improve the quality and durability of …

Green Chemistry As A Tool For Understanding The Toxic Substances Control Act: A Lecture Module For Undergraduate Students, Molly R. Blessing

Honors Scholar Theses

The Toxic Substances Control Act (TSCA) is the central form of chemical regulation existent in the United States today, yet scientists are often unaware or uncertain of its provisions. Violations of TSCA by unknowing chemists set industry and government unnecessarily at odds. A lecture on TSCA was developed for undergraduate students that uses the concept of green chemistry to promote interest and incentivize learning. Green chemistry methods are cleaner and less wasteful than traditional chemical ones, and many companies using them are at the forefront of technological innovation. The lecture explains both green chemistry and TSCA, includes company case studies, …

Microwave Assisted Chemical Synthesis Using Polydimethylsiloxane, Omniya Alomainy

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Synthesis And Characterization Of A New Cyano-Substituted Tris(Pyrazolyl)Borate And Its Thallium(I) Complex, Bozumeh Som

Electronic Theses and Dissertations

A new cyanoscorpionate - tris(4-cyano-3,5-diphenylpyrazolyl)borate (Tp^Ph2,4CN) has been synthesized and characterized. The thallium complex of this ligand TlTp^Ph2,4CN has also been prepared and characterized by FT-IR, ¹H NMR, and single-crystal X-ray-diffraction. The complex TlTp^Ph2,4CN crystalized in the monoclinic space group C2/c with unit cell a = 14.6697(10) Å, b = 13.9493(10) Å, c = 19.3347(12) Å, and b= 91.761(2)°. Structural comparison of TlTp^Ph2,4CN with analogous complexes demonstrated the effects of both steric and electron-withdrawing substituents on coordination geometry and the electronic properties of the metal ion. There were short contacts between the cyano groups …

Synthesis Of An Antimicrobial Textile Coating, William M. Morris

Chemistry and Biochemistry

A titania nanosol was synthesized and coated onto nylon/cotton blended textile substrates. The substrates were characterized via SEM for adhesion and nanoparticle formation, then subjected to antimicrobial efficacy tests. The titania nanosol was successfully coated on to textiles samples. Particles were observed to be around 2 by 3 micrometers and formed between the interstitial space of textile fibers. Although larger than typical nanoparticles, the coatings exhibited what seemed to be antimicrobial activity. Titania nanosol coated textile samples were subjected to Kirby Bauer Assay in the presence of S. aureus. The coated textile sample exhibited an inhibition of growth around its …

Computational Studies Of Ion Transport In Polymer Electrolytes, Hui Wu

Doctoral Dissertations

Improving ionic conductivity and lithium mobility in polymer electrolytes is important for their practical use for battery electrolytes. In this study, a combination of molecular dynamics and Monte Carlo simulations was used to bring insight into lithium ion transport in poly(ethylene oxide) (PEO) with plasticizers and also next to alumina solid surface doped with lithium salt. The simulations were performed using a moderately high molecular weight polymer (Mn = 10,000 g/mol) at an EO:Li ratio of 15. For the plasticized system, the PEO with LiN(CF3SO 2)2 (LiTFSI) was mixed with 10 wt% plasticizers that included either cyclic ethylene carbonate …

Part A: The Use Of Nonionic Associative Polymers For The Thickening And Emulsifying Of Personal Care Products/ Part B: The Synthesis Of A Manganese Sod Mimetic For Reactive Coatings, Mallory Lynn Mcmahon

Master's Theses

Part A

The use of nonionic associative thickeners was proposed for personal care applications.  Various limitations of current rheology modifiers used in personal care were discussed.  Nonionic associative polymers were examined as both thickeners and emulsifiers.  The structure/property relationship for nonionic polymers and their ability to thicken and emulsify were fully examined.  Results showed an increase in thickening efficiency for nonionic associative polymers with higher log(P) (partition coefficient) values.  This was due to the formation of smaller aggregates and increased bridging between aggregates.  The connection between oil polarity, log(P) of the associative polymer, and emulsion stability showed no relationship however; …

Resorbable Polymer-Hydroxyapatite Composites For Bone Trauma Treatment: Synthesis And Properties, Troy E. Wiegand

Department of Chemistry: Dissertations, Theses, and Student Research

Contemporary therapies for hard tissue replacement involve allographs, where the donor and recipient are of the same species, or the use of xenogenic transplants.  Intraspecies materials are often in short supply and interspecies materials are subject to immunological barriers such as disease and tissue rejection.  Synthetic composites are unencumbered by these limitations.  Poly lactic acid (PLLA) and its copolymers have been used in medicine due to their ability to be resorbed by the body without adverse effects.  PLLA’s are currently most commonly used in resorbable sutures and gauzes, but there is increasing interest in using them in conjunction with hydroxyapatite …

Changes To Electrical Conductivity In Irradiated Carbon-Nickel Nanocomposites, David F. Coy

Theses and Dissertations

Pre and post irradiation resistivity and XAFS measurements have been conducted to examine the effects of 0.5 MeV electron irradiations on nickel-carbon composites. Results showed a decrease in surface resistivity in all sample types of 14-30% following irradiation with a total electron exposure of 4 x 10^-16 cm^-2. Results also showed a corresponding decrease in NiO content for the irradiated samples as compared to measurements of non-irradiated samples. Surface resistivity measurement capabilities were established and measurement techniques refined to produce repeatable results of sufficient precision to discern changes in resistivity for an exposure of 2 x 10 …

Influence Of Magnesium Nitrate On The Corrosion Performance Of Sol-Gel Coated Aa2024-T3 Aluminium Alloy, Rajath Varma, Brendan Duffy, John Cassidy

Articles

Traditional anti-corrosion technology has relied heavily on using reducible metal species, predominantly hexavalent chromium (Cr(VI)), for protecting reactive metal alloys such as aluminium which is extensively used in the aerospace sector. However, the impending changes in the use of Cr(VI) in Europe and the United States have forced aerospace manufacturers to examine alternative materials for protecting aluminium. One of the most promising alternatives being investigated are organosilane based sol-gels containing anticorrosion additives. In this work the anti-corrosion properties of magnesium (II) nitrate (Mg(NO3)2) as a inhibitor was investigated at different concentrations (0.1% - 1.0 wt %) in a methyltriethoxysilane (MTEOS) …

Silver Doped Perfluoropolyether-Urethane Coatings: Antibacterial Activity And Surface Analysis, Niall Stobie, Brendan Duffy, Steven Hinder, Patrick Mchale, Declan Mccormack

Articles

The colonisation of clinical and industrial surfaces with pathogenic microorganisms has prompted increased research into the development of effective antibacterial and antifouling coatings. There is evidence that implanted biomedical surfaces coated with metallic silver can be inactivated by hysiological fluids, thus reducing the bioactivity of the coating. In this work, we report the biofilm inhibition of Staphylococcus epidermidis using a roomtemperatureprocessedsilver dopedperfluoropolyether-urethane coating. The release of silver ions from these fluoropolymers over a six-day period inhibited bacterial encrustation – as observed by scanning electron microscopy (SEM). X-ray photoelectron spectroscopy (XPS) analysis indicated differences in carbon, fluorine and sodium surface composition …

Effect Of Organic Chelates On The Performance Of Hybrid Sol–Gel Coated Aa2024-T3 Aluminium Alloys, Rajath Varma, John Colreavy, John Cassidy, Mohamed Oubaha, Colette Mcdonagh, Brendan Duffy

Articles

Sol–gels are organic–inorganic polymers formed by hydrolysis/condensation reactions of alkoxide precursors, primarily silanes, which have found applications as electronic, optical and protective coatings. These coatings possess important characteristics such as chemical stability, physical strength and scratch resistance. Further performance improvement is achieved through the incorporation of zirconium and titanium based nanoparticles, also formed through the sol–gel process. However due to the inherent difference in the reactivity of the precursors, the hydrolysis of each precursor must be carried out separately before being combined for final condensation. Zirconium precursors are commonly chelated using acetic acids, prior to hydrolysis, to lower the hydrolysis …

Chemistry Of Chromium Oxyfluorides And Group Vib Perfluoroglutarates, Bruce Michael Johnson

Dissertations and Theses

Pure chromium oxide trifluoride was prepared for the first time by reaction of CrO₃ and ClF with subsequent multiple fluorine treatments at 120°C. On the basis of its infrared spectrum, the purple CrOF₃ was assigned as a fluorine-bridged polymer with terminal oxygen groups. Chromium oxide trifluoride was found to be stable to 300°C, where it decomposes with the loss of oxygen to CrF₃.