Inorganic Chemistry Commons^™

Determination Of Corrosion Inhibitor Lubricity Improver In Jet Fuel By Liquid Chromatography-Electrospray Ionization Mass Spectrometry, David W. Johnson, Milissa Flake, Ryan Adams

Chemistry Faculty Publications

Military jet fuel (JP-8) is very similar to commercial jet fuel (Jet A) except for the presence of three additives, fuel system icing inhibitor, corrosion inhibitor–lubricity improver (CI-LI), and antistatic additive, which are added to improve characteristics of JP-8. Of particular interest is the CI-LI additive; the most common active ingredient is a dimer of linoleic acid. This article focuses on quantification of the active ingredient in the CI-LI additive by liquid chromatography–mass spectrometry (LC–MS). This method will allow the determination of CI-LI content in military jet fuel samples.

Removal Of Arsenic Using Iron Coated Limestone, Anitha Swarna

Masters Theses & Specialist Projects

Arsenic contamination in drinking water is a severe problem worldwide. The best way to prevent hazardous diseases from chronic arsenic exposure is to remove the exposure. Efforts to remediate arsenic in drinking water have taken two tracks. One is to provide surface or shallow well water sources as an alternative to the arsenic contaminated deep wells. Another approach is to remove arsenic from the contaminated water. Different removal technologies like oxidation, chemical coagulation, precipitation, adsorption and others are available. There are problems and benefits associated with each of these approaches that can be related to cultural, socio-economic and engineering influences. …

Synthesis Of Perylenediimide-Functionalized Silsesquioxane Nanostructures, Lan Xu

Masters Theses & Specialist Projects

Organic semiconductors functionalized nanostructures are becoming as promising materials for electronic device applications including organic photovoltaics (OPVs). Perylenediimide (PDI) derivatives have also been known as one of the best n-type organic semiconductors. PDI derivatives can form bulk materials, which are both photochemically and thermally stable and have been widely used in various optoelectronic devices. Due to the formation of high electron mobility of crystalline domains, they prefer to incorporate into a silsesquioxane network. Here, we describe the potential applicability of perylenediimide functionalized silsesquioxane nanoribbons (PDI-dimethyl nanoribbons) as an acceptor for optoelectronic devices. We have developed synthetic procedures to make the …

Science Classics, Mark Masthay

Chemistry Faculty Publications

An essay on the impact of the works in the Imprints and Impressions: Milestones in Human Progress, an exhibition of rare books from the collection of Stuart Rose. Exhibition was held Sept. 29-Nov. 9, 2014, at the University of Dayton.

Salen Aluminum Compounds In The Dealkylation And Detection Of Organophosphates, Rahul R. Butala

Theses and Dissertations--Chemistry

The focus of this dissertation is the use of aluminum Schiff base compounds, Salen(^tBu)AlBr (SAB), in the dealkylation and detection of organophosphates (OPs). Three SAB compounds, Salen(^tBu)AlBr (1), Salpen(^tBu)AlBr (2), and Salophen(^tBu)AlBr (3) were used to dealkylate a variety of trialkyl OPs. These reactions lead to unique organic-soluble aluminum phosphate compounds containing six-coordinate aluminum. Examples include [salen(^tBu)AlOP(O)(OCH₃)₂]_n (4), [salen(^tBu)AlOP(O)(OCH₂CH₃)₂]_n (5), [salen(^tBu)AlOP(O)(OPh)₂]_{n …}

Phosphate Esters, Thiophosphate Esters And Metal Thiophosphates As Lubricant Additives, David W. Johnson, John E. Hils

Chemistry Faculty Publications

Phosphate esters, thiophosphate esters and metal thiophosphates have been used as lubricant additives for over 50 years. While their use has been extensive, a detailed knowledge of how they work has been a much more recent development. In this paper, the use of phosphate esters and thiophosphate esters as anti-wear or extreme pressure additives is reviewed with an emphasis on their mechanism of action. The review includes the use of alkyl phosphates, triaryl phosphates and metal containing thiophosphate esters. The mechanisms of these materials interacting with a range of iron and steel based bearing material are examined.

Conversion Of Iodide To Hypoiodous Acid And Iodine In Aqueous Microdroplets Exposed To Ozone, Elizabeth A. Pillar, Marcelo I. Guzman, Jose M. Rodriguez

Chemistry Faculty Publications

Halides are incorporated into aerosol sea spray, where they start the catalytic destruction of ozone (O₃) over the oceans and affect the global troposphere. Two intriguing environmental problems undergoing continuous research are (1) to understand how reactive gas phase molecular halogens are directly produced from inorganic halides exposed to O₃ and (2) to constrain the environmental factors that control this interfacial process. This paper presents a laboratory study of the reaction of O₃ at variable iodide (I^–) concentration (0.010–100 μM) for solutions aerosolized at 25 °C, which reveal remarkable differences in the reaction intermediates …

Structure, Theoretical Studies And Coupling Reactions Of Some New Cyclic Boronic Esters, Andrew Kuttler, Sravanthi Durganala, Albert Fratini, Alexander Morgan, Vladimir Benin

Chemistry Faculty Publications

The present report describes the X-ray structural and theoretical studies of some new pinacolboronate esters, and it also outlines the use of the target structures in Suzuki coupling reactions to produce new aromatic or heteroaromatic esters and amides. X-ray structural analysis of the studied compounds revealed that the pinacolborane ring's position with respect to the benzene ring varies, depending on the particular environment. An ortho-positioned carboxylic ester (methyl ester) causes a nearly perpendicular orientation of the pinacolborane unit with respect to the benzene ring, whereas an ortho-positioned amide (N,N-dimethylamide) causes the pinacolborane unit to orient itself nearly coplanar. A plausible …

Synthesis And Computational Studies Of A New Class Of Lanthanide Niobate Cluster : [Ln4(H2O)8(So4)5(Nbo3)2]+3h2O; Ln= Dy, Tb, Brady D. Garabato

Masters Theses & Specialist Projects

Polyoxoniobates (PONbs) are a small family of highly electron-rich clusters. The development of new solids composed of these clusters have applications in green energy and electronics. However, the high charge environment of PONbs typically requires alkaline synthetic conditions that are unsuitable for introducing other metals and organic molecules, making synthesis of new systems difficult. To date, very few transition metals and organic ligands have been incorporated into these PONb solids, and lanthanide metal inclusion, which generally improves photoconductivity due to longlived f-orbital excitations, has not yet been fully realized. Here, the synthesis of a new class of lanthanide niobate cluster …

Characterization By Nmr Of Reactants And Products Of Hydrofluoroether Isomers, Cf3(Cf2)3och3 And (Cf3)2c(F)Cf2och3, Reacting With Isopropyl Alcohol, Howard Knachel, Vladimir Benin, William E. Moddeman, Janine C. Birkbeck, Thomas A. Kestner, Tayna L. Young

Chemistry Faculty Publications

The 3M Company product Novec™ 71IPA DL, a mixture of methoxyperfluorobutane, methoxyperfluoroisobutane and 4.5 wt.% isopropyl alcohol, has been found to be very stable at ambient temperature, producing fluoride at the rate of ~1 ppm/year. Our earlier kinetic and theoretical studies have identified the reaction mechanism. This paper identifies the ¹H and ¹⁹F NMR chemical shifts, multiplicities, and coupling constants of reactants and the major products that result from aging the mixture in sealed Pyrex NMR tubes for periods up to 1.8 years at temperatures from 26 °C to 102 °C. Chemical shifts and coupling constants of fluorine …

Interaction Between Lubricants Containing Phosphate Ester Additives And Stainless Steels, David W. Johnson, Matthew Bachus, John E. Hils

Chemistry Faculty Publications

One way to improve fuel efficiency in today’s jet aircraft engines is to create an environment for higher operating temperatures and speeds. New and improved lubricants and bearing materials must be developed to remain stable in these elevated operating temperatures. Three lubricants, with varying amounts of tricresyl phosphate added as an anti-wear/extreme pressure additive were tested on two different stainless steels at varying temperatures ranging from 300 °C to 350 °C in vacuum. Significant decomposition of the lubricant base-stocks and the phosphate ester additive did occur in most of the trials resulting in the formation of carboxylic acids and phenols. …

Preparation Of Phosphonoterephthalic Acids Via Palladium-Catalyzed Coupling Of Aromatic Iodoesters, Nathaniel Ivan, Vladimir Benin, Alexander Morgan

Chemistry Faculty Publications

The current article reports in detail the preparation of two phosphonoterephthalic acids: 2-phosphonoterephthalic acid (1) and 2,5-diphosphonoterephthalic acid (2). Efficient, scalable syntheses have been developed for both compounds based on Pd-catalyzed coupling reactions of iodinated terephthalate esters. Phosphonoterephthalic acids are potentially useful as flame-retardant additives or as monomers for the construction of acid-pendant polymer chains.

Reaction Between Polyol-Esters And Phosphate Esters In The Presence Of Metal Carbides, David W. Johnson, Carolyn Iacullo, John E. Hils

Chemistry Faculty Publications

The reaction of metal carbides with polyol esters found in aerospace lubricants and phosphate esters commonly used as additives was investigated. Carbides were of particular interest since modern materials under consideration at high temperature bearings have surfaces that are primarily metal carbides. Vanadium and chromium carbide were found to react with the ester and phosphate ester by a transesterification reaction, producing an alkyl phosphate which is less stable than the aromatic phosphate esters. In the process, the metal carbide is converted to the metal phosphate and metal polyphosphate, evidenced by the infrared and Raman spectra of the solid residue and …

Novel Microwave Assisted Synthesis Of Zns Nanomaterials, Suresh Pillai, Michael Seery, Damian Synnott, John Colreavy, Stephen Hinder

Articles

A novel ambient pressure microwave-assisted technique is developed in which silver and indium modified ZnS is synthesised. The as prepared ZnS is characterised by X-ray diffraction, UV-Vis spectroscopy, X-ray photoelectron spectroscopy and luminescence spectroscopy. This procedure produced crystalline materials with particle sizes below 10 nm. The synthesis technique leads to defects in the crystal which induce mid energy levels in the band gap and lead to indoor light photocatalytic activity. Increasing the amount of silver causes a phase transition from cubic blende to hexagonal phase ZnS. In a comparative study, when the ZnS cubic blende is heated in a conventional …

Molecular Forensic Science Analysis Of Nuclear Materials, Dallas Reilly

UNLV Theses, Dissertations, Professional Papers, and Capstones

Concerns over the proliferation and instances of nuclear material in the environment have increased interest in the expansion of nuclear forensics analysis and attribution programs. A new related field, molecular forensic science (MFS) has helped meet this expansion by applying common scientific analyses to nuclear forensics scenarios. In this work, MFS was applied to three scenarios related to nuclear forensics analysis. In the first, uranium dioxide was synthesized and aged at four sets of static environmental conditions and studied for changes in chemical speciation. The second highlighted the importance of bulk versus particle characterizations by analyzing a heterogeneous industrially prepared …

Nitrogen And Copper Doped Solar Light Active Tio2 Photocatalysts For Water Decontamination, Mike Fisher, Donal Keane, Pilar Fernandez-Ibanez, John Colreavy, Stephen Hinder, Kevin Mcguigan, Suresh Pillai

Articles

A novel class of photocatalytic coating capable of degrading bacterial and chemical contaminants in the presence of visible sunlight wavelengths was produced by depositing a stable photocatalytic TiO

2 film on the internal lumen of glass bottles via a sol–gel method. This coating was prepared in either undoped form or doped with nitrogen and/or copper to produce visible light-active TiO2 films which were annealed at 600 ◦C and were characterized by Raman and X-ray photoelectron spectroscopy. The presence of doped and undoped TiO2 films was found to accelerate the degradation of methylene blue in the presence of natural sunlight, while …

Reactions Of Methyl Perfluoroalkyl Ethers With Isopropyl Alcohol: Experimental And Theoretical Studies, Howard Knachel, Vladimir Benin, Chadwick Barklay, Janine C. Birkbeck, Billy D. Faubion, William E. Moddeman

Chemistry Faculty Publications

The reaction of an isomeric mixture of the methyl perfluoroalkyl ether, C4F9OCH3 (Novec-7100), in the presence of isopropyl alcohol (IPA) and/or water has been studied by measuring the rate of product formation using an ion-selective electrode (ISE) for fluoride ion, Karl Fisher coulometric titrations for water, and 1H and 19F NMR spectroscopy for product identification and rate studies. The results showed the methyl perfluoroalkyl ether to be very stable with products forming at the rate of ∼1 ppm per year at a laboratory temperature of 20 °C. Measurements over the temperature range of 6° to 100 °C were made on …

Synthesis And Flame Retardant Testing Of New Boronated And Phosphonated Aromatic Compounds, Vladimir Benin, Sravanthi Durganala, Alexander Morgan

Chemistry Faculty Publications

The present report describes the preparation and use of some dimethyl terephthalate derivatives in transition metal-catalyzed coupling reactions to produce new reactive flame retardants. Dimethyl iodoterephthalate and dimethyl 2,5-diiodoterephthalate were successfully employed in the preparation of phosphonic and boronic esters and acids. The latter were tested for heat release with a microcombustion calorimeter (ASTM D7309) to determine the potential for heat release reduction of these flame retardant molecules. The results showed that the addition of boronic or phosphonic acids greatly lowered the heat release, due to a condensed phase (char formation) mechanism. Adding ester groups to the boronic acids or …

The Tetrafluoroborate Salt Of 4-Methoxybenzyl N-2-(Dimethylamino)Ethyl-N-Nitrosocarbamate: Synthesis, Crystal Structure And Dft Calculations, Helene Hedian, Vladimir Benin

Chemistry Faculty Publications

The tetrafluoroborate salt of 4-methoxybenzyl N-2-(dimethylamino)ethyl-N-nitrosocarbamate was prepared in two steps, via the corresponding carbamate. Its crystal structure is monoclinic, space group P21/c. The unit cell dimensions are: a = 19.499(8) Å, b = 5.877(3) Å, c = 15.757(7) Å, α = 90°, β = 110.019(7)°, γ = 90°, V = 1696.5(12) Å3, Z = 4. The structure exhibits an unexpected, pseudo-gauche conformation with respect to the C2–C3 bond, due to a stabilizing hydrogen bond between the carbonyl oxygen (O1) and the hydrogen atom at the trialkylammonium center (H3n), with a distance between them of …

Application Of Raman Spectroscopy To Lubricants, Lubricated Surfaces And Lubrication Phenomena, David W. Johnson

Chemistry Faculty Publications

Recent advances in lasers and detector technologies and the development of low-cost instruments and fiber-optic probes have brought about an explosion in the lubrication systems being studied by Raman spectroscopy. This article provides examples of the use of Raman spectroscopy in the study of lubrication phenomena, including the characterization of liquid lubricants, lubricant additives, and solid lubricants; the study of vapor-phase lubrication; and the use of coated nanoparticles as lubricants.

A Sodium Salt Of The Dimer Of Boronoterephthalic Acid Anhydride, Scott Simmons, Albert Fratini, Vladimir Benin

Chemistry Faculty Publications

The title compound, sodium bis­(6-carb­oxy-1-hy­droxy-3-oxo-1,3-dihydro-2,1-benzoxaborol-1-yl)oxidanium, Na+·C16H15B2O13-, was prepared in two steps from 2-bromo-p-xylene. Its crystal structure was determined at 140 K and has triclinic (P) symmetry. The compound presents a unique structural motif, including two units of the cyclic anhydride of boronoterephthalic acid, joined by a protonated, and thereby trivalent, oxonium center. Association in the crystal is realized by complementary hydrogen bonding of the carboxyl groups, as well as by coordination of the sodium cations to the oxygen centers on the five-membered rings.

Theoretical Investigation Of A Reported Antibiotic From The 'Miracle Tree' Moringa Oleifera, Michael Horwath, Vladimir Benin

Chemistry Faculty Publications

Moringa oleifera, sometimes called the “Miracle Tree,” has received international attention for its potential to improve health in impoverished tropical areas. In addition to high vitamin content in the leaves and pods, the tree contains compounds with antioxidant and antibacterial properties. This study focused on the theoretical investigation of the suggested structure of one antibacterial compound, “pterygospermin,” whose existence was proposed after some studies of the roots of M. oleifera. The structure of pterygospermin was first proposed by a research group working in the 1950s, but later studies have not found evidence of this compound and have instead …

Synthesis And Catalytic Activity Of Nanostructured Cerium Oxide, Neil J. Lawrence

Department of Chemistry: Dissertations, Theses, and Student Research

Cerium oxide (ceria, CeO_2-x where x is 0 to 0.5) has been one of the most widely used heterogeneous catalysts particularly in three way catalytic converters. Most of the catalytic traits can be attributed to two properties of ceria: first, the high mobility and storage capacity of oxygen within the lattice; second, the ease with which cerium changes between Ce³⁺ and Ce⁴⁺ states. These properties, combined with the abundance of cerium on earth, make ceria a low-cost highly effective alternative to noble metal catalysts. Recent research has been focused on the nanoscale properties of ceria.

The effect …

Preparation And Characterization Of Some Substituted Benzyl N-Nitrosocarbamates Containing An N-2-(Methylthio)Ethyl Or A Bis(2-Aminoethyl)Sulfide Functionality, Satya Venkata, Eric Shamo, Vladimir Benin

Chemistry Faculty Publications

The synthesis and characterization of some substituted benzyl N-nitrosocarbamates with an N-2-(methylthio)ethyl or a bis(2-aminoethyl)sulfide functionality is reported, as a part of a long-term goal to design and prepare novel photolabile structures that could be used as substances for controlled release of alkylating and/or crosslinking agents. The synthesis was accomplished by reaction of benzyl chloroformates with the corresponding amines, resulting in the preparation of carbamates. The latter were subsequently nitrosated, utilizing two different N-nitrosation methods, to yield the target structures.

Preparation Of Halogenated Derivatives Of Thiazolo[5,4-D]Thiazole Via Direct Electrophilic Aromatic Substitution, Vladimir Benin, Alan T. Yeates, Douglas Dudis

Chemistry Faculty Publications

Chlorination and bromination reactions of thiazolo[5,4-d]thiazole led to the generation of its mono- and dihalogenated derivatives. These are the first instances of successful direct electrophilic aromatic substitution in the thiazolo[5,4-d]thiazole ring system. X-ray analysis demonstrates that both 2-bromothiazolo[5,4-d]-thiazole and 2,5-dibromothiazolo[5,4-d]thiazole are planar structures, with strongly manifested π-stacking in the solid state. Theoretical analysis of the pyridine-catalyzed halogenation (MP2/6-31+G(d) and B3LYP/6-31+G(d)calculations) reveals that introduction of one halogen actually leads to a slightly enhanced reactivity towards further halogenation. Several halogenation mechanisms have been investigated: 1) The direct C-halogenation with N-halopyridine as electrophile; …

C–N Bond Rotation And E–Z Isomerism In Some N-Benzyl-N-Methylcarbamoyl Chlorides: A Dft Study, Michael Horwath, Vladimir Benin

Chemistry Faculty Publications

The current report presents the first theoretical study of the restricted CN bond rotation in carbamoyl chlorides. Several N-benzyl-N-methylcarbamoyl chlorides were investigated, with varying pattern of substitution in the aromatic ring. Optimizations and frequency calculations were conducted employing DFT at the B3LYP/6-31+G(d) level of theory. Each of the studied structures exhibits a pair of rotamers (s-Z and s-E), generated upon rotation around the C(O)N bond. The s-E isomer is the global minimum in every case, but the preference for it is usually less than 1 kcal/mol. Two possible transition state structures were identified …

Secondary N-Nitrosocarbamate Anions: Structure And Alkylation Reactions. A Dft Study, Vladimir Benin

Chemistry Faculty Publications

The current article reports theoretical studies (DFT: B3LYP/6-31+G(d)) on the structure and alkylation reactions of the anions of some secondary N-nitrosocarbamates, a class of ambident nucleophiles whose chemistry has been little explored. Several anions (1–4), with an increasing size of the carbamate alkyl (aryl) group were investigated, in an attempt to establish the influence of the size of that group on the thermal stability and regioselectivity of alkylation of the title anions. The conclusion is that thermal stability and the mode of reaction are affected significantly only in the presence of very large and branched carbamate groups. The thermal …

Preparation Of Some Substituted Terephthalic Acids, Susanna Branion, Vladimir Benin

Chemistry Faculty Publications

We report in detail the preparation of two substituted terephthalic acids: 2‐sulfomethylterephthalic acid (1) and 2‐phosphonoterephthalic acid (2). Efficient, short syntheses have been developed for both compounds. They are potentially useful monomers for construction of acid‐pendant polymer chains.

Preparation, Characterization And Dft Studies Of Some New N-Nitrosocarbamates And N-Nitrosoureas, Ragavan Narayanan, Helene Hedian, Eric Shamo, Vladimir Benin

Chemistry Faculty Publications

We are presenting the preparation, characterization and density functional theory (DFT) studies {B3LYP/6-31+G(d)) of several reiated classes of N-nitrosocarbamates and N-nitrosoureas. The iong-range goal is the design and preparation of compounds, which would undergo photochemical or hydrolytic decomposition, to yield stabilized cyclic cations that can serve as alkylating agents at various nucleophilic centers, including DNA bases.

Synthesis, Structural Studies And Desilylation Reactions Of Some N-2-(Trimethylsilyl)Ethyl-N-Nitrosocarbamates, Arpitha Thakkalapally, Vladimir Benin

Chemistry Faculty Publications

The present report describes the preparation and characterization of several N-2-(trimethylsilyl)ethyl-N-nitrosocarbamates, designed as precursors to thermally unstable secondary N-nitrosocarbamate anions via fluoride-assisted cleavage. X-ray structural studies demonstrate that the core N-nitrosocarbamate moiety has a nearly planar geometry, with an s-E orientation at the N–N bond. DFT calculations (B3LYP/6-31+G(d)) reproduce accurately the structural features of the title compounds and detailed conformational analysis at the same level of theory addresses the long-standing issue of preferred geometries for three classes of related structures: N-nitrosocarbamates, N-nitrosoureas and N-nitrosoamides. Desilylation studies demonstrate that both the …