Analytical Chemistry Commons^™

Structural Evolution Of Gold-Doped Bismuth Clusters AubiN– (N = 4−8), Seema Pande, Tian Jian, Navneet S. Khetrapal, Lai-Sheng Wang, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

The structures of gold-doped bismuth clusters, AuBi_n⁻ (n = 4−8), are investigated through a joint photoelectron spectroscopy and density functional theory (DFT) study. Well-resolved photoelectron spectra are obtained at several photon energies. Global minimum searches coupled with DFT calculations yield low-lying structures, whose relative energies are further evaluated by single-point energy calculations at the CCSD(T) level of theory. Vertical detachment energies are calculated with the inclusion of spin−orbit effects to compare with the experimental data. Three-dimensional structures are found to be dominant in this size range, while a planar low-lying isomer is observed only for AuBi_{4 …}

Biosensing And Catalysis Applications Of Nanoporous Gold (Npg) And Platinum-Speckled Nanoporous Gold (Npg-Pt) Electrodes, Christopher J. Freeman

Theses and Dissertations

The importance of porous materials has risen substantially in the last few decades due to their ability to reduce the size and cost of bioanalytical devices and fuel cells. First, this work aims to describe the fabrication of nanoporous gold (NPG) electrodes that are resistant to electrode passivation due to fibrinogen biofouling in redox solutions. The effect on potentiometric and voltammetric experiments was seen as a deviation from ideal behavior on planar gold electrodes, whereas NPG electrodes were consistently behaving in a Nernstian fashion at low concentrations of ferri-ferrocyanide (£100 mM). An improvement in electrode behavior on NPG electrodes versus …

Characterization Of Coacervate Systems Using Redox Sensitive Dyes, Caleb Kaiser

All Master's Theses

Coacervates are systems that spontaneously form when two oppositely charged polyelectrolytes are mixed in a concentrated salt solution. When coacervates form, a biphasic equilibrium occurs in the sample with two phases present in the solution. The two phases are described as the dense phase and the lean phase, named after the amount of polyelectrolyte material in each phase. Coacervates have been topics of interest to researchers in a variety of fields including biomedical applications, drug delivery devices, and more. This thesis worked towards the characterization of coacervate systems on the molecular level by investigating the interaction of the polyelectrolytes and …

Interfacial Corrosion Of Copper And The Formation Of Copper Hydroxychloride, Mary Teague, Shengxi Li, Hongbo Cong

Williams Honors College, Honors Research Projects

Electrical circuitry is an industry, among many others, heavily using the element of copper. Ensuring the mechanical integrity of Cu is crucial, especially in salt environments, for the multifaceted composition of circuits. 4N NaCl solution (equilibrium concentration in ~84% RH) simulated this three-phase system. Rectangular Cu samples were partially immersed in both ambient and continuous lab air sparging atmospheres to understand waterline corrosion of the metal. Open circuit potentials (OCP) were continuously taken during the immersion testing for a maximum of 5 days. A scanning electron microscopy (SEM) equipped with an energy dispersive X-ray spectrometer (EDS), Raman spectroscopy, and 3-D …

Abnormal Phase Transition Between Two-Dimensional High-Density Liquid Crystal And Low-Density Crystalline Solid Phases, Wenbin Li, Longjuan Kong, Baojie Feng, Huixia Fu, Hui Li, Xiao Cheng Zeng, Kehui Wu, Lan Chen

Xiao Cheng Zeng Publications

Some two-dimensional liquid systems are theoretically predicted to have an anomalous phase transition due to unique intermolecular interactions, for example the first-order transition between two-dimensional high-density water and low-density amorphous ice. However, it has never been experimentally observed, to the best of our knowledge. Here we report an entropy-driven phase transition between a high-density liquid crystal and low-density crystalline solid, directly observed by scanning tunneling microscope in carbon monoxide adsorbed on Cu(111). Combined with first principle calculations, we find that repulsive dipole–dipole interactions between carbon monoxide molecules lead to unconventional thermodynamics. This finding of unconventional thermodynamics in two-dimensional carbon monoxide …

Carbon Quantum Dots: Bridging The Gap Between Chemical Structure And Material Properties, Timothy J. Pillar-Little Jr.

Theses and Dissertations--Chemistry

Carbon quantum dots (CQDs) are the latest generation of carbon nanomaterials in applications where fullerenes, carbon nanotubes, and graphene are abundantly used. With several attractive properties such as tunable optical property, edge-functionalization, and defect-rich chemical structure, CQDs have the potential to revolutionize optoelectronics, electro- and photocatalysis, and biomedical applications. Chemical modifications through the addition of heteroatoms, chemical reduction, and surface passivation are found to alter the band gap, spectral position, and emission pathways of CQDs. Despite extensive studies, fundamental understanding of structure-property relationship remains unclear due to the inhomogeneity in chemical structure and a complex emission mechanism for CQDs.

This …

Heteroatom Doped Porous Carbon For Alternative Energy Conversion And Storage Systems, Fatema A. Choudhury

Theses and Dissertations

Abstract

The electrocatalysis of oxygen plays a significant role in several electrochemical energy storage and conversion systems including metal−air batteries, fuel cells, electrocatalytic and photocatalytic water splitting. The sluggish kinetics and complex reaction mechanism of this cathodic oxygen reduction reaction (ORR) affect the performance and practical application of such renewable energy technologies. To address this limiting factor, a suitable electrocatalyst is required for ORR. In general, platinum or highly dispersed Pt-based nanoparticles on carbon black are considered as the best ORR catalyst. But platinum being very scarce and expensive tends to increase the cost. Moreover, platinum-based catalysts are prone to …

Capacity Fading Analyses Of Lini0.5Co0.2Mn0.3O2And Lini0.5Co0.2Mn0.3O2/Lifepo4 Cathode Materials For Lithium-Ion Battery, Yi Hu, Xiang-Zhu He, Zhong-De Deng, Ling-Yong Kong, Wei-Li Shang

Journal of Electrochemistry

The LiNi _0.5Co _0.2Mn _0.3O₂/LiFePO₄ (NMC532/LFP) composite cathode material for lithium-ion battery was prepared by wet ball-milling. The capacity fading behaviors of LiNi _0.5Co _0.2Mn _0.3O₂ (NMC532) and LiNi _0.5Co _0.2Mn _0.3O₂/LiFePO₄ (NMC532/LFP) were analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM), charge/discharge and electrochemical impedance spectroscopy (EIS) tests. The results indicated that the capacity retention values of NMC532/LFP were 97.80% and 86.48%, respectively, after 50 cycles and 60℃ high temperature storage. The NMC532/LFP exhibited better cycle performance and high temperature storage performance. …

Distinct Ice Patterns On Solid Surfaces With Various Wettabilities, Jie Liu, Chongqin Zhu, Kai Liu, Ying Jiang, Yanlin Song, Joseph S. Francisco, Xiao Cheng Zeng, Jianjun Wang

Xiao Cheng Zeng Publications

No relationship has been established between surface wettability and ice growth patterns, although ice often forms on top of solid surfaces. Here, we report experimental observations obtained using a process specially designed to avoid the influence of nucleation and describe the wettability-dependent ice morphology on solid surfaces under atmospheric conditions and the discovery of two growth modes of ice crystals: along-surface and off-surface growth modes. Using atomistic molecular dynamics simulation analysis, we show that these distinct ice growth phenomena are attributable to the presence (or absence) of bilayer ice on solid surfaces with different wettability; that is, the formation of …

Surface Chemical Properties Of Mo2C, W2C, Mo2N And W2N Probed With Co, Co2 And O2 Adsorption: A Dft Analysis, Jingyun Ye, Tianyu Zhang, Lingyun Xu, Shuxia Yin, Krishanthi Weerasinghe, Pamela Ubaldo, Ping He, Qingfeng Ge

Journal of Electrochemistry

Transition metal carbides and nitrides are attractive materials for electrodes in many electrochemical energy storage and conversion applications. In the present study, we use density functional theory slab calculations to characterize the surface chemical properties of molybdenum (Mo) and tungsten (W) carbides and nitrides, namely, Mo₂C, W₂C, Mo₂N and W2N with the adsorption of CO, CO₂ and O₂. These probing molecules provide measures of in both acidity/basicity and redox property of for the surfaces of these carbides and nitrides. Our results show that Lewis basic sites were responsible for CO_{2 …}

Anodic Nanocatalysts For Formic Acid Fuel Cells: An Electrochemical Study, Tamanna F. Shanta Mcfarland

Dissertations

Direct formic acid fuel cells (DFAFCs) have been reported as a prominent source of alternative green energy and solution to imminent energy crisis for the last two decades. The challenge to commercialize DFAFCs is primarily the utilization of cost effective, high performance and durable anodic catalyst for formic acid oxidation (FAO). Consequently, this dissertation addresses the extensive electrochemical study of a number of nanomaterials towards the potential use as electrocatalysts for FAO. Morphology and elemental analyses of the prepared nanomaterials were obtained using electron microscopy techniques.

After a general introduction and overall review of this dissertation (Chapter I), studies of …

Controlled Electrochemical Synthesis Of Single One-Dimensional Metal Nanochains Across Microgap Electrodes., Amareshwari Konutham

Electronic Theses and Dissertations

This study mainly focuses on the fabrication of single one dimensional (1D) NP chains across the 5-micron gap of Au two electrode devices (TED). This has been achieved by electrochemical deposition of Ag onto the two electrodes, soaking the TED in 0.1 M Cetyltrimethyl ammonium bromide for 2-3 hours, and then close monitoring of the current as a function of time while a voltage across the two Ag coated Au electrodes in air. One dimensional Ag nanoparticle chain formation occurred by oxidation of Ag to Ag⁺ at the positive electrode followed by movement of Ag⁺ ions to the …

Cathodic Electrochemiluminescence Of Meso-Tetra(4-Sulfophenyl)Porphyrin/Potassium Peroxydisulfate System, Yan-Fenga Wang, Dia Luo, Duo-Liang Shan, Xiao-Quan Lu

Journal of Electrochemistry

A new electrochemiluminescence (ECL) system in aqueous solution was constructed by using meso-tetra(4-sulfophenyl)porphyrin (TSPP) as a luminophoreand potassium peroxydisulfate (K2S2O8) as a reductive–oxidative coreactant. Upon sweeping from 0 V to -1.5 V, two cathodic ECL peaks were found simultaneously. One appeared at -0.8 V, which is corresponding to the reduction of TSPP, another at -1.2 V, that is attributed to the reduction of K2S2O8. And methylene blue could quench the ECL of TSPP effectively. In accordance with the linearity between quenching efficiency and the concentration of methylene blue, a method to determine methylene blue was established. The ECL mechanism was …

Development Of Luminescent Quantum Dot-Enabled Nano- And Microplatforms For Multiplex Detection Of Biomarkers, Kristen S. Williams

LSU New Orleans Theses and Dissertations

Luminescent semiconductor quantum dots (QDs) are extensively researched for use in biological applications. They have unique optical and physical properties that make them excellent candidates to replace conventional organic dyes for cellular labeling, multiplexing, nucleic acid detection, and as generalized probes. The primary focus of this dissertation was to utilize quantum dots for improvement in immunoassays. Specifically, atherosclerosis biomarkers were detected simultaneously in an effort to demonstrate advances in early detection diagnostics.

Quantum dot-antibody bioconjugates were prepared by encapsulation into mesoporous silica and functionalized with thiol and amine groups to enable bioconjugation. Functionalization of the mesoporous silica quantum dot composites …

Ion-Specific Ice Recrystallization Provides A Facile Approach For The Fabrication Of Porous Materials, Shuwang Wu, Chongqin Zhu, Zhiyuan He, Han Xue, Qingrui Fan, Yanlin Song, Joseph S. Francisco, Xiao Cheng Zeng, Jianjun Wang

Xiao Cheng Zeng Publications

Ice recrystallization is of great importance to both fundamental research and practical applications, however understanding and controlling ice recrystallization processes remains challenging. Here, we report the discovery of an ion-specific effect on ice recrystallization. By simply changing the initial type and concentration of ions in an aqueous solution, the size of ice grains after recrystallization can be tuned from 27.4±4.1 to 277.5±30.9 mm. Molecular dynamics simulations show that the ability of the ion to be incorporated into the ice phase plays a key role in the ultimate size of the ice grains after recrystallization. Moreover, by using recrystallized ice crystals …

Functionalized Silica Gel For Adsorption Of Cesium From Solution, Kenneth Marshall Seaton Iii

Electronic Theses and Dissertations

Mesoporous silica gel containing embedded phosphotungstic acid (PTA) was synthesized by sol-gel co-condensation of tetraethyl orthosilicate with PTA in acidic media. The obtained material had high Brunauer-Emmett-Teller Theory (BET) surface area and pore volume. A characteristic band of the Keggin structure of PTA was present in its FT-IR spectrum while its X-ray diffraction patterns were absent. This proved the embedding of PTA on a sub-molecular level and not as a second phase. Acidic sites were determined by neutralization with base in aprotic solvent, followed by titration of the remaining base with an acid. The material demonstrated high adsorption capacity of …

Electrochemical Methods In Clinical Immunoassays And Nucleic Acid Analyses, Yanbing Zu

Journal of Electrochemistry

The applications of electrochemical methods in immunoassays and nucleic acid analyses are discussed. Instead of a comprehensive literature review, this paper focuses on the techniques that have already been commercialized and used in clinical diagnoses. Learning from the success of these methods will help us to further understand the strengths and limitations of electroanalytical technology. A personal perspective of the research and development in these fields has been presented.

Resistive-Pulse Analysis Of Single Phospholipid Vesicles Using Quartz Nanochannels, Jonathan T. Cox, Bo Zhang

Journal of Electrochemistry

We report the uses of resistive-pulse method and quartz nanochannels for the detection and size analysis of single vesicles. Cylindrical shape quartz nanochannels have been used to detect single phospholipid vesicles ranging from 100 to 300 nm and polystyrene nanoparticles ranging from 170 to 400 nm in diameter. Translocations of single vesicles and nanoparticle were detected as individual square current pulses, which could be used to determine particle size. Our results show excellent agreement between the particle/vesicle sizes obtained from nanochannels and those from dynamic light scattering (DLS) and scanning electron microscopy (SEM). This electronic-based method was found to be …

Direct Electrochemistry Of Glucose Oxidase Based On Ws2 Quantum Dots And Its Biosensing Application, Chen-Lu Li, Hua-Ping Peng, Zhong-Nan Huang, Yi-Lun Sheng, Pei-Wen Wu, Xin-Hua Lin

Journal of Electrochemistry

In this study, a novel electrochemical glucose biosensor has been developed by immobilizing glucose oxidase (GOx) on tungsten disulfide quantum dots (WS₂ QDs) on the surface of glassy carbon electrode (GCE). Transmission electron microscopy, UV-vis spectroscopy and cyclic voltammetry were employed to characterize the morphology, structure, and electrochemical behaviors of the as-prepared WS₂ QDs and the biofilm modified electrode. The results suggested that the WS₂ QDs could accelerate the electron transfer between the electrode and the immobilized enzyme, which enabled the direct electrochemistry of GOx without any electron mediator. Besides, the immobilized GOx in WS₂ QDsfilm …

Application Of Adamantane Schiff Base Nickel Complexes/Graphene Oxide/Glassy Carbon Modified Electrode In Detection Of Carmine, Peng Guo, Zheng Liu, Hai-Ying Li, Li-Ming Ma

Journal of Electrochemistry

The Schiff base nickel complexes/graphene oxide/glassy carbon electrodes were prepared by embedded method and electrodeposition on which were used to quantitatively detect the contents of carmine. Cyclic voltammetry, chronoamperometry, scanning electron microscopy (SEM) and other methods were employed to characterize properties and morphologies of the modified electrodes. The results show that the adamantane double Schiff base nickel complexes/graphene oxide/glassy carbon electrode had high electric catalytic activity toward carmine oxidation reaction, and might provide an easy and quick way to detect carmine content with good reproducibility.

Reply To ‘On The Bonding In Ligand-Protected Gold Clusters’, Wen Wu Xu, Xiao Cheng Zeng, Yi Gao

Xiao Cheng Zeng Publications

In the recent Correspondence, Professor Henrik Grönbeck made several comments on the recently developed grand unified model (GUM), in particular using the ligand-protected gold cluster [Au₂₅(SR)₁₈]¹⁻ as an example. We noted that the latter cluster can be viewed as belonging to a special group of ligand-protected gold clusters that contain one or several icosahedral Au₁₃ motifs. For this group of clusters, a secondary block Au₁₃(8e) has been identified as a more convenient way to describe their structure anatomy and evolution. Another extension of the GUM is the identification of the new elementary …

Probing The Structural Evolution Of Gold−Aluminum Bimetallic Clusters (Au2AlN−, N = 3−11) Using Photoelectron Spectroscopy And Theoretical Calculations, Navneet S. Khetrapal, Tian Jian, Gary V. Lopez, Seema Pande, Lai-Sheng Wang, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

We report a combined photoelectron spectroscopy and theoretical study of the structural evolution of aluminum cluster anions doped with two gold atoms, Au₂Al_n^– (n = 3−11). Well-resolved photoelectron spectra have been obtained at several photon energies and are used to compare with theoretical calculations to elucidate the structures of the bimetallic clusters. Global minima of the Au₂Al_n^– clusters were searched using the basin-hopping method combined with density functional theory calculations. Vertical detachment energies were computed for the low-lying isomers with the inclusion of spin−orbit effects and were used to generate simulated …

Choline Chloride Eutectics: Low Temperature Applications, Kaila M. Kuehn, Camille M. Massmann, Natalie R. Sovell

The Journal of Undergraduate Research

Deep eutectic solvents (DESs) have a lower melting point than each of their individual components due to ion dipole interactions or hydrogen bonding. Traditionally, DES are used for processing metals through plating and have many synthesis applications. DES are able to be substituted for hazardous solvents that are traditionally used for metal plating and synthesis. This, along with many other advantageous properties, appear promising for the use of DESs as solvents or for use in electrochemical systems, particularly at low temperatures. Choline chloride:propylene glycol was a novel DES synthesized and analyzed for its properties, including melting point, viscosity, conductivity, heat …

Nitric Oxide Release From Poly(Lactic-Co-Glycolic Acid) Nanoparticles And Titanium Alloy, Nina A. Reger

Electronic Theses and Dissertations

Current methods for the treatment of bacterial infection involve the use of systemic antibiotics, which are high concentrations of antibiotics delivered over a long period time. Unfortunately, the use of systemic antibiotics can cause harmful side effects to the patient and increases the possibility for antibiotic resistance. The delivery of antibiotics or alternative antimicrobial compounds, such as nitric oxide, directly to the site of infection would decrease the amount of antibiotic necessary to treat a bacterial infection.

Poly (lactic-co-glycolic acid)/polyvinyl alcohol nanoparticles and a titanium- aluminum-vanadium metal oxide alloy implant were surface functionalized to deliver nitric oxide. Polymer nanoparticles can …

Criegee Intermediate-Hydrogen Sulfide Chemistry At The Air/Water Interface, Manoj Kumar, Jie Zhong, Joseph S. Francisco, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

We carry out Born–Oppenheimer molecular dynamic simulations to show that the reaction between the smallest Criegee intermediate, CH₂OO, and hydrogen sulfide (H₂S) at the air/water interface can be observed within few picoseconds. The reaction follows both concerted and stepwise mechanisms with former being the dominant reaction pathway. The concerted reaction proceeds with or without the involvement of one or two nearby water molecules. An important implication of the simulation results is that the Criegee-H₂S reaction can provide a novel non-photochemical pathway for the formation of a C–S linkage in clouds and could be a …

Energetic Effects Of Hole Transporting Materials On The Performance Of Organometal Halide Perovskite Photovoltaic Cells, So Min Park

Theses and Dissertations--Chemistry

Efficient, inexpensive, lightweight and flexible solar cells are desired to help meet the world’s growing energy needs. Organometal halide perovskite (OMHP) photovoltaic (PV) cells have shown dramatic increases in solar cell efficiencies increase over the last 5 years. OMHP PV cells have attracted significant attention due to their broad absorption spectra, high electron and hole mobility, and low production cost. The interface between hole transporting layer (HTL) and perovskite thin films have a significant influence on charge transfer and overall solar cell performance. 2,2’,7,7’-tetrakis(N,N-di-p-methoxyphenylamine)9,9’-spirobifluorene (Spiro-OMeTAD) is a small molecule largely used as HTL in perovskite solar cells. However, this material …

Heterogeneous Base Metal Catalyzed Oxidative Depolymerization Of Lignin And Lignin Model Compounds, John Adam Jennings

Theses and Dissertations--Chemistry

With the dwindling availability of petroleum, focus has shifted to renewable energy sources such as lignocellulosic biomass. Lignocellulosic biomass is composed of three main constituents, lignin, cellulose and hemicellulose. Due to the low value of cellulosic ethanol, utilization of the lignin component is necessary for the realization of an economically sustainable biorefinery model. Once depolymerized, lignin has the potential to replace petroleum-derived molecules used as bulk and specialty aromatic chemicals. Numerous lignin depolymerization strategies focus on cleavage of β-aryl ether linkages, usually at high temperatures and under reductive conditions.

Alternatively, selective benzylic oxidation strategies have recently been explored for …

Characterization And Application Of Hybrid Nanostructures For Enhanced Biological Imaging Using Fluorescence Microscopy Techniques, William E. Martin

Theses and Dissertations--Chemistry

Fluorescence microscopy is a powerful tool for interpreting the structure and function of biomolecules, and their interactions with one another. Understanding fundamental biological mechanisms is important to the development of improved treatments for a variety of diseases. Fluorescent tags are used to track the motion and longevity of such events, with the ability to monitor several biomolecules at once. Currently, many of these studies are conducted using bulk measurements, or several biological events at the same time, because the added light from several emitters can more easily overcome the high fluorescence background inherent to biological systems. Although important in their …

Effect Of Charged Species On The Gradient Properties, Kayesh Ashraf

Theses and Dissertations

Surface chemical gradients are materials that exhibit continuous, gradually varying chemical or physical properties along and across the length of a substrate. As a result, each point on the gradient surface can represent an individual sample. They are broadly classified as chemical and physical gradients depending upon the properties that the gradient exhibits. A physical gradient involves a continuous variation of physical properties such as surface roughness and film porosity on the micrometer scale. Chemical gradients involve a gradual variation of chemical properties such as polarity, acidity and basicity, etc. Such gradients have found various applications in cell adhesion, nanoparticle …

An Stm Study On The Structure Of Pt(100)/Ionic Liquid Omipf6 Interface, Jin Peng, Mian-Gang Li, Li-Qiang Xie, Jia-Wei Yan, Bing-Wei Mao

Journal of Electrochemistry

Potential-dependent structures of Pt(100)/ionic liquid 1-methyl-3-octylimidazolium hexafluorophosphate (OMIPF₆) interface have been studied by electrochemical scanning tunneling microscopy (ECSTM). The cation OMI⁺ forms ordered structure on Pt(100) surface, which exists in a potential region of about 1.2 V. When the potential is more negative than -0.6 V, it can be seen that the ordered structure transforms to disordered structure. When the potential shifts positively to +0.6 V, the desorption of cations OMI⁺ occurs, which indicates that strong electrostatic repulsion is needed to overcome chemical interaction between OMIPF6 and Pt(100) surface, leading to the desorption. The above results …