Chemistry Commons^™

The Lineal Polarization Method For Corrosion Rate Measurement Of Reinforcing Bar Of Concrete In Situ, Ai-Ling Du, Wen-Tao Hou, He-Ming Zhang, Jian-Qun Luo

Journal of Electrochemistry

A linear polarization method was applied to measure corrosion rate of reinforcing bar of concrete in situ. Generally in the experiment, the area and shape of the reinforcing bar as a working electrode can be changed and adjusted according to our needs. But polarization area cannot be defined when reinforcing bar is polarized in situ, so that a real R_p can't be obtained. Thus the purpose of present work is to improve the measurement system. We used the double-ring auxiliary electrodes made by ourselves. The size of the double-ring auxiliary electrodes was adjusted repeatedly until the real polarization area …

Cathodic Indirect Oxidation Of Organic Compounds(Ⅱ)——Cathodic Indirect Epoxidation Of Olefine, Xue-Ying Zhang, Bao-Qiu Cui, Deng-Ping Gu, Wei Li

Journal of Electrochemistry

We described a novel cathodic indirect epoxidation system in which O₂ was first cathodically reduced to H₂O₂. Then VO(acac)₂ was oxidized by H₂O₂ homogeneously to VO(acac)₂OOH which was used to epoxidize some olefine such as maleic, fumaric and crotonic acids. Many affecting factors on the current efficiency were optimized. The research will contribute to the developments of organic electrosynthesis.

The Electro-Catalytic Oxidation Of Hcooh On Electrodeposited Pd Electrode, Quan Zhou, Cun-Zhong Zhang, Xiao-Lin Lu, Zhong-Da Wu

Journal of Electrochemistry

The coherent electroplates were prepared by electro depositing Pd on supporting materials glassy carbon. The surface morphology of the electrodes was examined by SEM. The electro oxidation of HCOOH in HClO₄ solution was investigated by using cyclic voltammetry. The results show that the deposited conditions in the preparation of electrodes by electro depositing Pd affect the electrodes electro catalytic activity to the oxidation of HCOOH. The platinized Pd electrode on GC substrates using large current density is of higher catalytic activity to the oxidation of HCOOH than Pd electrode. The electro catalytic activity of PdO formed on the Pd …

The Study On Lithiated Titanium Composite Oxides As Negative Electrode For Lithium-Ion Battery, Xiao-Yan Yang, Shou-Nan Hua, Shu-Yong Zhang

Journal of Electrochemistry

Lithiated titanium composite oxides Li₄Ti₅O₁₂ were prepared from Li₂CO₃ and TiO₂. The XRD results of this composite oxides indicated that the compound had a spinel structure. The electrochemical behavior of lithiated titanium composite oxides was examined. The results showed that this material had an excellent cyclic capability and reversibility for lithium insertion, and had high specific capacity: the initial discharge capacity was 300 mAh·g^-1 , and the reversible capacity was 100 mAh·g^-1 . The discharge plateau (about 1.5 V) and the charge plateau (about 1.6 V) were very …

Studies Of The LialYNi1-YO2 As Cathode Materials For Rechargeable Lithium Ion Batteries, Xiao-Gan Li, Wei-Hua Qiu, Chuan-Gang Lin, Qing-Guo Liu

Journal of Electrochemistry

In this paper, we have synthesized series of single-phase LiAl_yNi_1-yO₂ (differentive in value-y) by solid reaction. Through examining their electrothemical properties, found that, under a proper sintering condition, Li_xAl_0.25Ni_0.75O₂ solution for cathode materials of rechargeable lithium ion batteries showed more pleasing properties in overcharge-resist and cycling life (vs LiNiO₂). When x>1, the capacity can be kept 125mAh/g after 30 cycles under higher charged/discharged voltages ranging from 3.0 V to 4.8 V, whereas that of pure LiNiO₂ has only 61 nAh/g after 25 cycles. The …

Electrochemical Characteristics Of Sb Irreversibly Adsorbed On Pt(100), Pt(110), Pt(111) And Pt(320) Electrodes, Yi-Yun Yang, Zhi-You Zhou, Qi-Hui Wu, Shi-Gang Sun

Journal of Electrochemistry

The electrochemical behaviors of irreversibly adsorbed antimony on Pt(100), Pt(110), Pt(111) and Pt(320) were studied by using cyclic voltammetry. The results revealeds that the Sb adatoms are stable on Pt(100), Pt(110), Pt(111) and on Pt(320) when electrode potentials are below 0.45 V(SCE) and 0.40 V, respectively. It was demonstrated that various coverages of Sb ad can be conveniently obtained by controlling the number of potential cycling and varying the upper limit of potential scan. The electrochemical behaviors of irreversibly adsorbed antimony varied with the surface atomic arrangement of Pt single crystal electrodes. Based on quantitative results of the relationship between …

A Study On Stochastic Resonance For The Process Of Active-Passive Transition Of Iron In Sulfuric Acid, Hong-Bo Ding, Bao-Yun Xia, Chun-Sheng Yin, Zhong-Xiao Pan, Renato Seeber

Journal of Electrochemistry

The bistable characteristics of the process of active passive transition of iron in sulfuric acid was described and the stochastic resonance phenomenon in the process was simulated.

Corrosion Behavior Of Reinforcing Steel In Concrete, Rong-Gui Du, Rong-Gang Hu, Zu-De Feng, Jiang-Guang Tan, Chang-Jian Lin

Journal of Electrochemistry

The corrosion behavior of reinforcing steel in concrete in chloride free and chloride contaminated simulated concrete solutions was studied by electrochemical technique. The results showed that the reinforcing steel exhitibted different corrosion characteristics in the different solutons. In general, the steel in concrete was protected in the test solutions with no salt or the lower concentration of NaCl. When the concentration of NaCl is larger than 70%, however, the corrosion behavior of the steel varied considerably, and the corrosion rate increased as pH fell and the concentration of Cl^- increased.

A Study On The Cylindrical Zinc-Air Battery, Sheng-Sian Li, Gui-Mao Zhou, Xin-Ping Ai, Han-Xi Yang

Journal of Electrochemistry

The zinc air battery has advantages of high specific energies and low cost, therefore attracts much interests. However, its application is limited only in prismatic and button type.This paper reported a novel design of cylindrical zinc air batteries and the performances of the batteries tested at various conditions. The results showed that when discharged at the current of 40 mA at 20 °C, the capacity of AA size and AAA size batteries reached 4000mAh and 1400mAh respectively, corresponding to the energy densities 280 Wh/kg and 200 Wh/kg. The effects of the discharge current, temperature and humidity on the performances of …

Synthesis Of Li1+XMn2O4 Cathode Material For Lithium-Ion Batteries With Solution Method, Pei-Song Liu, Sing-Quarn Liu, Qing Li, Zhao-Yong Chen, Bai-Lan Zhang, Zuo-Long Yu

Journal of Electrochemistry

The cathode materials Li_1+xMn₂O₄ were prepared with citric acid complexing and solution impregnating methods. Structure characterization and specific surface area test were performed by means of XRD, BET methods, the influences of calcination temperature, Li/Mn molar ratio and raw materials on the structure and electrochemical capacity of samples have beem examined. The results showed that the Li/Mn molar ratio and calcimation temperature were the key factors affecting the electrochemical capacity of cathode materias. The optimum conditions for synthesis of  Li_1+xMn₂O₄ cathode material were 0≤x≤0.05 and calcined at 750°C. The initial …

Mechanisimic Study Of Fes Electrode Process, Cong-Sheng Guan, Shu-Zhen Duan

Journal of Electrochemistry

The mechanism of FeS electrode process has been investigated by using linear cyclic voltammetry. The electrode porcess of FeS is accompanied with the formation and dissolution of insoluble FeS and controlled by ohmic resistance. The peak currents and potentials on the cyclic voltammograms are dependent lineally on the square root of the scan rates. According to this, an ohmic resistance controlling model of FeS electrode has been put forward, and the relative functions between peak currents or potentials and scan rates have been deduced. The theoretical deduction is corresponding to the results of the experiments.

Electrochemical Evaluation On The Porosity Of Electroless Ni-P Alloy Coatings, Hong-Ying Yu, Dong-Bai Sun, Jing-Bing Huang, De-Jun Yang

Journal of Electrochemistry

By investigating the polarization curves of pure Ni-P alloy, Ni-P alloy coation and carbon steel in nitric acids with different concentrations, the sutable concentration of nitric acid for the evaluation of the porosity of Ni-P alloy coatings has been determined and the coatings with different thickness have been evaluated. The results indicated that the nitric acid with 10 wt% concentration is the most suitable solution for the porosity of the coating by using electrochemical method. The polarization curve of Ni-P alloy coating in 10% nitric acid can accurately reveal the porosity. With the decrease of the porosity of the coating, …

The Electrochemical Polymerization Of Erythrosin And The Fluorescence Spectra Of Polyerythrosin, Hong-Ping Zhu, Shao-Lin Mu

Journal of Electrochemistry

The solution used for the electrolysis consisted of 0.03 mol·dm^-3 erythrosin, 0.05 mol·dm^-3 sodium tetraborate and 0.5 mol·dm^-3 KCl with pH 8.50. Polyerythrosin film with red color has been electrochemically synthesized using repeated potential cycling between -0.20 and 1.10 V (vs.SCE). The film growth and the electrochemical property of polyerythrosin are affected by electrolytic conditions. Two main absorption peaks of polyerythrosin at 326 nm and 370 nm appear in the UV-visible spectrum, which are different from that of the monomer. Polyerythrosin in dimethyl sulfoxide or dimethylformamide has a strong fluorescence intensity and the fluorescence intensity of polyerythrosin …

Pulse Potential Modulated Electrochemical Gas Sensors, Zhong-Bai Zhou, Liang-Dong Feng, Wen-Jun Liu

Journal of Electrochemistry

The current popular electrochemical gas sensors are mostly stable with regard to their operating states. As a result, the further improvement of sensor charcateristics is restricted by such a "steady state". Based on the transient electrochemistry principle, a kind of all new transient electrochemical multi component gas sensors— "pulse potential modulated electrochemical gas sensors" was established by combining computer controlled fast modulated potential technique with microelectrode method.This novel approach provided a real time and dynamic sensor technique integrated with acquisition, treatment and display of signals for rapid simultaneous detecion of multicomponent gases, as illustrated by the case of monitoring of …

The Effect Of Anode Thickness In Sofcs With Anode Supported Ysz Film, Yi-Huang Zhang, Yi Jiang, Zi-Gui Lu, Yong-Lai Dong, Jing-Wang Yan

Journal of Electrochemistry

Solid oxide fuel cells with supported yttria stabilized zirconia electrolyte films on anode substrates of various thickness have been fabricated. The electrochemical performances of the SOFCs have been examined. The results showed that the cell performance was limited by the anodic overpotential, which is caused mainly by a concentration polarization when the anode substrate is thick. The anodic overpotential was reduced obviously as the thickness of anode substrate was decreased. As a result, the performance of the SOFC cell was improved. With a 0.5 mm anode substrate, a SOFC cell produced a power density about 0.19 W/cm² at 800 …

A New Method For The Preparation Of The Electrodes With Very Low Platinum Loading Used In Proton Exchange Membrane Fuel Cell, Zhi-Gang Shao, Bao-Lian Yi, Ming Han, Ya-Guang Qiao, Hao Liu, Jing-Rong Yu

Journal of Electrochemistry

Research and development on low platinum loading electrode is very important in reducing the cost of proton exchange membrane fuel cell(PEMFC) stack. This paper has put forward a new method to prepare the electrode of PEMFC. The pore forming substances were used in this methd. The low platinum loading electrodes (0.02 mg_Pt⋅cm^-2) have already been prepared with the method. Compared with the traditional method, the new method is simple, cheep, and easy to scale up. The superior composition of the electrodes is catalyst: pore forming substance: Nafion= 3:3:1. The performance of a single cell using this …

Oxidation Of [(Cyclic Triamine)(1,5-Cyclooctadiene)Iridium]+ Cations By Hydrogen Peroxide Forms Metallaoxetanes, Thomas C. Flood, Masanori Iimura, Jeremy M. Perotti, Arnold L. Rheingold, Thomas E. Concolino

Chemistry and Physics Faculty Articles

Iridaoxetane 3 formed by oxidation of 1 with aqueous H₂O₂ is isolated and characterized, providing a rare example of formation of a metallaoxetane by direct oxidation of a metal–alkene complex.

Study Of Polyaromatic Hydrocarbons Emitted In The Fly Ash From Coal Combustion In A Fluidized Bed Combuster, Rebecca Heltsley

Masters Theses & Specialist Projects

Exposure to Polyaromatic Hydrocarbons (PAHs) has long been identified as an environmental concern because of their carcinogenic and mutagenic effects. The Environmental Protection Agency (EPA) has developed a list of 16 PAHs that are found on the Priority Pollutant List due to the extensive amount of data suggesting the hazards of these compounds. These toxic compounds are often emitted into the atmosphere by anthropogenic sources, such as combustors. Therefore, analysis of these compounds must be conducted during coal combustion. Two 1000-hour coal combustion burns were performed using the 0.1 MWth bench-scale fluidized bed combustor (FBC), which is found in the …

Development Of Bismaleimide/Cyanate Ester Based Aerospace Polymers For Possible Use In Nasa's Relaunchable Vehicles Program, Brian Sisk

Masters Theses & Specialist Projects

Since the beginning of the space age, the goal of materials development in the aerospace industry has been to replace metal alloys with much lighter polymer resins, while maintaining the strength over a wide temperature range characteristic of metals. Polymers such as polyimides and epoxies have been used to satisfy many needs, but strength, temperature resistance, and ease of processing are difficult to incorporate into a single polymer. Because of this gap, bismaleimides and cyanate esters, and possibly combinations of the two, are seen as having potential in applications where ease of processing characteristic of epoxies is desired, but for …

Design And Characterization Of A Synthetic Electron-Transfer Protein, Anna Y. Kornilova, James F. Wishart, Wenzhong Xiao, Robin C. Lasey, Anna Fedorova, Yeon-Kyun Shin, Michael Y. Ogawa

Chemistry Faculty Publications

A 30-residue polypeptide [H21(30-mer)] with the sequence Ac-K(IEALEGK)(2)(IEALEHK)-(IEALEGK)G-NH2 was synthesized. The circular dichroism (CD) spectrum of the peptide shows minima at 208 and 222 nm and theta(222)/theta(208) = 1.06, which indicates the formation of a self-assembled coiled-coil when dissolved in aqueous solution. The concentration dependence of the CD data can be fit to an expression that describes a two-state monomer-dimer equilibrium for the apopeptide (K-d = 1.5 +/- 0.4 mu M and theta(max) = -23 800 +/- 130 deg cm(2) dmol(-1)), showing that it has a maximum helicity of 69%. A [MTSL-C21(30-mer)] dimer was also prepared in which MTSL is …

Studies Of Sulfur Reduction Of Taurine And Taurine-Conjugated Bile Acids By Bile Acid 7Α-Dehydroxylating Bacteria, Jiang Qian

Masters Theses & Specialist Projects

Bile acids are C24 steroids that are derived in the liver from cholesterol and secreted into the intestinal lumen to aid in emulsification of dietary lipids and lipid-soluble vitamins. The indigenous intestinal microflora modify bile acids, producing up to 20 unique bile acid metabolites. The 7α-dehydroxylation of the bile acids is the most physiologically important bile acid biotransformation. All known intestinal bacteria capable of bile acid 7α-dehydroxylation are anaerobic, gram-positive rods of the genera Clostridium and Eubcicterium. Bile acid 7α-dehydroxylating bacteria often contain bile salt hydrolase, which hydrolyzes the peptide bond in taurine-conjugated bile acids to yield a free bile …

Reducing Mass Degeneracy In Sar By Ms By Stable Isotopic Labeling, Chris Bailey-Kellogg, John J. Kelley Iii, Cliff Stein, Bruce Randall Donald

Dartmouth Scholarship

Mass spectrometry (MS) promises to be an invaluable tool for functional genomics, by supporting low-cost, high-throughput experiments. However, large-scale MS faces the potential problem of mass degeneracy -- indistinguishable masses for multiple biopolymer fragments (e.g. from a limited proteolytic digest). This paper studies the tasks of planning and interpreting MS experiments that use selective isotopic labeling, thereby substantially reducing potential mass degeneracy. Our algorithms support an experimental-computational protocol called Structure-Activity Relation by Mass Spectrometry (SAR by MS), for elucidating the function of protein-DNA and protein-protein complexes. SAR by MS enzymatically cleaves a crosslinked complex and analyzes the resulting mass spectrum …

Photophysical Study Of Linked 1,4,7-Triazacyclonane Cr (Iii) Complexes, Weizhen Tu

Masters Theses

A series of mono and bimetallic Cr(III) complexes based on the 1,4,7- triazacyclonoane(TACN) were prepared. Complexes of the Cr(TACN)X₃ , and Cr₂(DTNE)X₆ demonstrated marked difference of photophysical properties on the nature of X. In cases where X is more easily oxidized, enhanced extinction coefficient in the ⁴A₂ ➔ ²T, absorption and larger quantum yield of emission at 77K were observed in the dimer complexes. Shorter lifetime and enhanced decay rate were also found in the dimer complexes suggests that there might exists weak coupling behavior between the two Cr(III) metal cents in the …

Reaction Of Caffeic Acid With Amino Acids, Yonggang Wang

Masters Theses

The reaction of caffeic acid with tryptophan was studied as a model for the reaction of caffeic acid with amino acids in the aquatic environment. Although the autoxidation reaction of caffeic acid in aqueous solution with subsequent dimerization had been previously studied, it was examined as well for comparison purposes. The present studies demonstrate that oxidized caffeic acid would react with tryptophan. The reaction, like the dimerization reaction, was catalyzed by the presence of iron(III) ions at low pH ( <4) and by hydroxide ions at high pH (10). The reaction of caffeic acid with itself yielded six products, four of which were identified by mass spectroscopy as dimers, with the other two being trimers. The reaction of caffeic acid with tryptophan yielded three product peaks. Two of the product peaks had similar retention times to the dimers from the self-reaction of caffeic acid; the third was a new product resulting from the reaction of caffeic acid with the tryptophan.

A mechanism for the reaction of caffeic acid with tryptophan has been proposed. This mechanism was based on the analysis …

Cyclodextrin Inclusion Complexes Of Betamethasone-Related Steroids Studied Using Hplc, Keith Gerald Flood

Seton Hall University Dissertations and Theses (ETDs)

.

Observation Of Stratospheric Ozone Depletion Associated With Delta Ii Rocket Emissions, Martin N. Ross, Darin W. Toohey, W. T. Rawlins, E. C. Richard, K. K. Kelly, A. F. Tuck, M. H. Proffitt, Donald E. Hagen, Alfred R. Hopkins, Philip D. Whitefield, J. R. Benbrook, W. R. Sheldon

Physics Faculty Research & Creative Works

Ozone, chlorine monoxide, methane, and submicron particulate concentrations were measured in the stratospheric plume wake of a Delta II rocket powered by a combination of solid (NH₄ClO₄/Al) and liquid (LOX/kerosene) propulsion systems. We apply a simple kinetics model describing the main features of gas-phase chlorine reactions in solid propellant exhaust plumes to derive the abundance of total reactive chlorine in the plume and estimate the associated cumulative ozone loss. Measured ozone loss during two plume encounters (12 and 39 minutes after launch) exceeded the estimate by about a factor of about two. Insofar as only the …

Kinetic Studies On The Reaction Of Hydroxyl Radicals With Aromatic Compounds, Paul Chadwick

Masters

No abstract provided

High Efficiency Separation Of Microbial Aggregates Using Capillary Electrophoresis, J. M. Schneiderheinze, Daniel W. Armstrong, G. Schulte, David J. Westenberg

Chemistry Faculty Research & Creative Works

Recent advances in the technique of capillary electrophoresis have demonstrated fast, highly efficient separation of mixtures of intact microbes. This paper describes the application of this technique for the separation of microbial aggregates of Micrococcus luteus, Saccharomyces cerevisiae, or Alcaligenes faecalis. The aggregates of these microbes were resolved into several highly efficient peaks with analysis times under 10 min and efficiencies approaching 1 000 000 plates m-1 in some cases. A reproducible relationship was found between the electrophoretic mobility and the aggregation number or size of the cluster under a given set of experimental conditions. Often, cellular aggregation was reversible …

Reaction Of Tricarbonyl(Dienal)Iron Complexes With B-Allyldiisopinocampheylborane, Vadapalli Prahlad, Abdel-Aziz S. El-Ahl, William A. Donaldson

Chemistry Faculty Research and Publications

Addition of allyldiisopinocampheylborane to racemic (dienal)iron complexes, followed by oxidation, affords diastereomeric (1,4,6-trien-3-ol)iron complexes with moderate to low enantioselectivity. The high enantioselectivity typically observed for this allylborane reagent is attenuated by steric interaction between the Fe(CO)₃ group and the chiral isopinocampheyl groups. Further diminution of the enantioselectivity is observed for dienal complexes in which one rotomer predominates.

42nd Rocky Mountain Conference On Analytical Chemistry

Rocky Mountain Conference on Magnetic Resonance

Abstracts from the 42nd annual meeting of the Rocky Mountain Conference on Analytical Chemistry, co-sponsored by the Colorado Section of the American Chemical Society and the Rocky Mountain Section of the Society for Applied Spectroscopy. Held in Broomfield, Colorado, July 30 - August 3, 2000.