Chemistry Commons^™

Electrocatalytic Oxidation Of Formaidehyde And Formic Acid On A Pt/SbAd Electrode, Hong Li, Lincai Jiang, Xiong Jiang

Journal of Electrochemistry

The electrocatalytic activity for the oxidation of formaldehyde and formic acid ona Sb-modified platinum (Pt/Sb_ad) was investigated. Results showed that the Pt/Sb_ad electrode was electrocatalytically more active than a Pt electrode in the anodic oxidation of formaldehyde and formicacid. In the case of formaldehyde, an oxidation peak appeared at a potential of ca. 0.7V. During the oxidation of formic acid, a 4-fold increase in the 1st peak current was observed. The Sb-modified platinum electrode was found to be most electrocatalytically active at a coverage of 0.75±0.05. The electrocatalytic activity of the Pt/Sb_ad electrode can be best …

Synthesis Of LiXCoo2 And Its Behaviour In Rechargeable Lithium Battery, Mingfeng Guo, Ruimin Yang, Zebo Zhang, Jincao Ye

Journal of Electrochemistry

The Variations of crystal lattice parameters of Li_xCoO₂ during charge anddischarge have been st ud ied by XRD and AAR spectroscopy. It was found that the Li_xCoO₂ crystalvolume expanded during charge and contracted during discharge. The crystal lattice structure was broken because of the formation of Co₃O₄ when deeply charge.The variation of lattice parameter C₀ value in cycling process was similar to that in charge process.The variation of 006 peak was the mostsensitive in every case. In case of preheating for 20 hours at 700℃ before operating high temperature, the …

Application Of Inhibitor To Improve The Anticorrosion Performance Of Electrophoretic Coating, Changshou Cai, Fangteng Su, Bihuan Liu, Guomou Wen, Jingdong Guo, Renxin Liu, Weidong Tian

Journal of Electrochemistry

To improve the anti-corrosion performance of electrocoating, organic andinorganic inhibitors are applied in an anodic electrophoretic-coating. The results show that the deposition of polymer with zinc phospate exhibits a high inbihition efficiency. The inhibition mechanism of the inhibitor in electrocoating has been studied.

The Electrode Process Of Y(Ⅲ) On Copper Electrode And Its Surface Metallizing, Chungen Zhou, Shuzhen Duan

Journal of Electrochemistry

The reduction of yttrium ion on copper electrode in NaCl-KCl-YCl₃ molten saltshas been investigated. The results indicate that the formation of intermetallic compounds is occuredbefore the metallic yttrium to be formed. The formation of intermetallic compounds is controlled bythe process of which yttrium atoms are diffusing into copper electrode. The kinetic characters todiffusion of yttrium atoms were also discussed.

A Investigation Of Hydrogen-Storage Alloy As Catalytic Electrode For Hydrogenation Of Nitrobenzene, Shigang Lu, Hanxi Yang, Changfa Wan

Journal of Electrochemistry

Since hydrogen-storage alloy ean not only absorb hydrogen atoms to form highlyreactive metal hydride as hydrogen source by electrolysis but also possesses a certain catalytic activityfor hydrogenation,it is thus feasible to utilize the allov as a novel electrode for electrolvtichydrogenation in organic electroreduction. This work employed misch metal AB₅ type alloy as acatalytic electrode and studied the electrochemical hydrogenation of nitrobenzene.

The hydrogen-storage electrode (MH) was a plastic bonded electrode sheet made from a paste of Mm(NiCoMnAl)₅ alloy powder and teflon emulsion. The electrolysis was performed at constantcurrent and controlled potential in a three electrode cell of H-type …

Spectroscopic Temperature Measurements For A Direct Current Arcjet Diamond Chemical Vapor Deposition Reactor, Scott W. Reeve, Wayne A. Weimer

Journal of the Arkansas Academy of Science

The diamond thin filmcommercial market isprojected to exceed one billion dollars by the year 2000. Potential applications of diamond thin films range from cutting tools to electronics tomedical devices. The explosion ofinterest in this fieldresults from the extreme properties diamond possesses: itis the hardest material known toman and yet, has a coefficient of friction similar to Teflon;its ability to conduct heat is five times that of copper; and diamond is completely inert. However, despite the tremendous economic incentive, there are still several technological barriers preventing diamond filmscale-up to commercial production. Included among these are a fundamental understanding of the gas …

A Diamond Thin Film Flow Sensor, Sacharia Albin, John C. Hagwood, John B. Cooper, David L. Gray, Scott D. Martinson, Michael A. Scott

Electrical & Computer Engineering Faculty Publications

We present the results of theoretical modeling and experimental testing of a diamond thin film sensor for flow studies. It is shown that the high thermal conductivity of a diamond film can enhance the frequency response of the flow sensor. One-dimensional heat diffusion equation was solved using the finite difference method for determining the frequency response. Two different sensor structures were analyzed: a Ni film on a quartz substrate (Ni/Q) and an intermediate layer of diamond film between the Ni film and quartz substrate (Ni/D/Q). The theoretical model predicts a frequency response for the Ni/D/Q sensor higher than that of …

Diamond Thin Film Sensors For Hypersonic Flow Studies, Bhaskar Kumar Bulusu

Electrical & Computer Engineering Theses & Dissertations

Conventional metal film sensors can measure flow instabilities of the order of 60 kHz. The turbulence fluctuations in the hypersonic regime are of the order of 200- 400 kHz. To measure these fluctuations, sensors with an enhanced frequency response are required. Therefore, it is required to identify the parameters to enhance the frequency response. These include parameters such as the temperature sensitivity, the resistivity, the thermal conductivity, the diffusivity, specific heat capacity and the geometric size and shape of the film and the substrate. A selection of materials was then carried out to maximize the frequency response. Diamond was identified …

Initiation And Study Of Localized Corrosion By Scanning Electrochemical Microscopy, David O. Wipf

CAS Publications

This paper describes methods to study the initiation and formation of localized corrosion pits on stainless–steel and aluminum samples. These methods are based on the use of a scanned probe microscope, the scanning electrochemical microscope (SECM). The SECM is specifically designed for operation in electrolyte solution and so is uniquely suited for examination of corrosion processes. SECM imaging of a corrosion pit on stainless steel is presented. In addition, the initiation of single pits on aluminum and stainless steel by using the SECM tip to electrogenerate a local source of Cl^– is described.

The Corrosive Effects Of Salt Spray On Electrolytic Zinc Plated Mechanical Fasteners: The Case Of Clear Chromate And Yellow Dichromate Coatings On Medium Carbon Plated Bolts, Souleymane Boukari

Dissertations and Theses @ UNI

The purpose of this study was to evaluate the relationship between plating thickness and corrosion resistance of zinc coated medium carbon steel bolts under salt spray moisture conditions. Two types of zinc coatings were chosen for the study: the clear chromate zinc and the yellow dichromate zinc. One hundred and eighty 3/8-16 x 5 3/4 inch medium carbon steel bolts were selected for the test and divided into groups of 18. Two types of salt solution were used in the study: the low salt and the high salt. Bolts with various coatings tested with low salt concentration were composed of …

Orientational Phase Transition In Na_{X}C_{60} (1, T. Yildirim, J. E. Fischer, A. B. Harris, Peter W. Stephens, Dengfa Liu, Laurent Brard, Robert M. Strongin, Amos B. Smith Iii

Chemistry Faculty Publications and Presentations

X-ray diffraction and calorimetry data on cubic Na_xC₆₀(1<x60, e.g., T_m(x=1.3)=325 K. The ordered phases are the same as in pure C₆₀: simple cubic, space group Pa3¯, but the orientations in the disordered phase are more restricted. We explain how Na stabilizes the ordered phase to rather high T, while K and Rb do not, in terms of Coulomb interactions between C₆₀ molecules and and Na ions which we calculate from the local charge density of C₆₀.

S-H Stretching Frequencies In Ruthenium Mercaptan Complexes And The Crystal And Molecular Structures Of [Cpru(Pph3)2(S-C4h, Haengsoon Park, David Minick, Mark Draganjac, Joey W. Crump, A. W. Cordes, Elizabeth M. Holt

Journal of the Arkansas Academy of Science

No abstract provided.

Aspects Of Gold Recovery From An Indigenous Ore, Cormac Patrick Mcnamee

Masters

This project involved the investigation into the basic electrochemistry of the thiourea-formamidine disulphide redox couple and an estimation of the formal potential, Eo1 for the couple. By carrying out optimisation experiments on the leaching of gold from an ore sample from the Avoca mine in Co. Wicklow, the optimum leaching conditions were determined for maximum gold extraction. The effects of various organic and inorganic species on the adsorption of gold onto activated carbon and modified peat were investigated with the use of factorial designed experiments. The Langmuir Isotherm model was applied to estimate the capacity of the carbon for these …

Evolved Gas Analysis Using Coupled Tg-Cg & Tg-Ftir, Keith Bradfield

Masters Theses & Specialist Projects

Thermal analysis methods have ben used for many years for material characterization. In recent years, thermal methods have been coupled to other methods of chemical analysis to obtain more complete material characterization. This study looks at thermal decomposition of polymer samples as well as coal samples in atmospheres of nitrogen and air. The thermal analysis instrument used was coupled to a Gas Chromatograph (GC) and a Fourier Transform Infrared Spectrometer (FTIR) so that the gaseous products evolved during thermal decomposition could be analyzed. The results obtained show that the coupled techniques of TG -GC and TG-FTIR can show pyrolysis and …

Novel Chemical Preparative Route For Semiconducting Mose2 Thin Films, K. C. Mandal, O. Savadogo

Faculty Publications

No abstract provided.

Rheology Of Aqueous Suspensions Of Polystyrene Latex Stabilized By Grafted Poly(Ethylene Oxide), Harry J. Ploehn, J. W. Goodwin

Faculty Publications

A water-soluble carbodiimide has been used to end-graft aminated poly (ethylene oxide)(PEO) chemically onto colloidal polystyrene particles. Two particle sizes (115 and 347 nm diameter) and two PEO molecular weights (112 000 and 615 000 g mol^–1) were combined to give suspensions with four different ratios of polymer layer thickness to particle radius. Electrophoresis demonstrated that the PEO was grafted, not just adsorbed. Dynamic light scattering showed that the adsorbed and grafted layers had similar structures and that non-ionic surfactant perturbed the PEO configurations. Steady shear and oscillatory rheometry indicated that long-ranged polymeric forces between particles governed the …

Design Of A Viscometer Using Magnetostriction Of Ferromagnetic Probes, Subhendra Nath Sarkar

Journal of the Arkansas Academy of Science

On-line measurement of viscosity of process liquids at process temperature is difficult though industrially very important. A viscometer is designed which can do this up to about 300 °C almost on-line within about 1-8% accuracy except for very viscous liquids like glucose. It uses a ferromagnetic probe designed to mechanically vibrate in the ultrasonic frequency range. An excitation coil sends repeated excitation current pulses to induce mechanical vibration in the probe tip. When placed in a process fluid, the vibration amplitude is damped due to the viscosity of the fluid, and the damped vibration is sensed by Faraday's principle by …

Choosing A Calcium Supplement For Sheep Fed Cereal Grains, R L. Peet, Michael Hare

Journal of the Department of Agriculture, Western Australia, Series 4

Sheep fed cereal grains as an energy source over summer usually need added calcium because cereal grains are generally low in calcium (for example, 0.03 per cent calcium compared to 0.26 per cent phosphorus), and there may not be a natural source such as clover, weeds, leafy stubble or edible bush in the paddock.

The safestt and most effective calcium supplement is finely ground limestone added to the feed, but some farmers have used other sources of calcium such as gypsum and superphosphate in this manner.

The Impact Of Solid State Science In Our Society, Juana Acrivos

Faculty Publications, Chemistry

No abstract provided.

Picosecond Laser Pulse Irradiation Of Crystalline Silicon, K. L. Merkle, H. Baumgart, R.H. Uebbing, F. Phillipp

Electrical & Computer Engineering Faculty Publications

Morphology changes introduced by picosecond laser pulses at λ = 532 nm and 355 nm in (111) and (100) silicon samples are studied by means of optical and high-voltage electron microscopy. Depending on energy fluence, orientation and wavelength, amorphous or highly defective regions may be created. From an analysis of damage thresholds and damage depth distributions it is concluded that melting and energy confinement precedes the formation of the structural changes.

The Use Of Thermal Analysis In The Identification And Characterization Of Fibers Of Forensic Interest, Ronald J. Coffey

All-Inclusive List of Electronic Theses and Dissertations

This study investigates the use of thermal analysis for the identification and characterization of fibers for forensic purposes. Fibers such as polyesters, polyacrylics, polypropylenes and nylon were investigated by Differential Thermal Analysis (D.T.A.) and Thermogravimetric Analysis (T.G.A.) to see if their resulting thermograms were characteristic of each fiber. Also, infrared analysis was performed on each fiber. In addition, such factors as heating rate and sample size along with fiber blends were studied as to their effect on thermograms. As a result of this study several important conclusions may be drawn. Although it was found that for the most part D.T.A. …

Luminescence In Slipped And Dislocation-Free Laser-Annealed Silicon, R.H. Uebbing, P. Wagner, H. Baumgart, H. J. Queisser

Electrical & Computer Engineering Faculty Publications

Photoluminescence of cw laser-annealed silicon shows a dramatic difference in electronic behavior of the reconstructed material depending upon either creation or suppression of dislocations. Beyond a critical exposure time slip appears, and the luminescence of these samples is dominated by dislocation-related defect levels.

Nitrogenous Fertilisers For Cereal Production, M G. Mason

Journal of the Department of Agriculture, Western Australia, Series 4

Among the many factors influencing crop response to nitrogen applications, the most important are the season, soil type, paddock history, time of application and source of nitrogen. Before deciding whether to use nitrogen on a cereal crop, which source to use and at what rate, the farmer needs some understanding of how these factors work.

Process Control Of Activated Sludge Treatment, Phase Ii, Richard I. Kermode, Robert W. J. Brett, Joseph D. Pault Jr.

KWRRI Research Reports

Material balances on substrate and microorganisms were derived in conjunction with various mixing configurations thought to accurately describe the activated sludge process. These models include the completely mixed with bypass, plug flow, and plug flow with bypass. Two sets of kinetic mechanisms for substrate utilization and bacterial growth were employed.

A feed forward controller was designed from linear approximations of the material balances derived in the completely mixed with bypass mixing model. Utilizing frequency response methods, the controller was found essentially identical to a completely mixed modeled controller developed in a prior investigation.

Through computer simulation the controller's effectiveness was …

On The Mechanism Of The Diels-Alder Reaction--Dimerization Of Trans-Phenylbutadiene, Michael Ward Mcnicholas

Dissertations and Theses

The Diels-Alder dimerization of trans-1-substituted butadienes is expected to yield a cyclohexene adduct with the substituents in the 3 and 4 positions cis to one another. This prediction is based on past observations of other Diels-Alder additions. The cis-isomer is the only one consistent with a two-stage mechanism proposed by Woodward and Katz.

In the case of trans-phenylbutadiene, the expected adduct is cis-3-phenyl 1-4-(trans-styry1) cyclohexene. Alder, Haydn and Vogt, however, reported that the corresponding trans-isomer is the dimerization product. There is reason to believe that the observation of the trans-isomer may have been the result of product isomerization during purification. …

Evidence For The Existence Of Two Stable Sites For Cobalt Impurity Atoms In Aluminum, Arun Venkatachar

Dissertations and Theses

Using Fe⁵⁷Mössbauer spectroscopy, two alternative sites occupied by cobalt (10^-4 at. % ) impurity atoms in aluminum have been isolated. The substitutional site A is the stable position after annealing the sample above 840 K, followed by a rapid quench. The impurity atoms in site A are characterized by a single line Mössbauer spectrum (indicative of a cubic environment), a room-temperature f = 0.502 (r. m. s. displ. 0.071 A) and an I. S. (reI. to Fe) = -0.421 mm/sec. For anneals below 770 K the cobalt atoms migrate to site B, which is characterized by a …

Investigation Of The Alpha-Sub-Gamma Phase In Alnico 6, Cortez Samuel

Dissertations and Theses

The purpose of this research project was to study the αᵧ phase in Alnico 6. Other phases were studies for comparison. Also the effect of an applied magnetic field on the formation of the αᵧ phase was investigated.

Three single crystals of Alnico 6 were heat treated for one hour--one at 1250°C, one at 1000°C, and one at 800°C--and water-quenched. The microstructure of each sample was observed with the optical microscope, and X-ray diffraction patterns were taken to determine the crystal structure of the phases present.

Several single crystal samples of Alnico 6 were heat treated at 1000°C and furnace-cooled. …

Sheep : Experimental Basis For Urea Feeding Recommendations, Department Of Agriculture, Western Australia

Journal of the Department of Agriculture, Western Australia, Series 4

Recent scientific reviews have concluded that in spite of the great number of experimental observations recorded throughout the world there is no evidence yet to prove that urea can be used profitably for sheep on low quality roughages in genuine grazing conditions.

An experiment is in progress at Merredin Research Station this season, especially designed to demonstrate a response to urea by sheep grazing wheat stubbles, if such a response is possible.

The Control Of Weeds In Cereals, Geoffrey A. Pearce

Journal of the Department of Agriculture, Western Australia, Series 4

PRACTICALLY all broadleaved weeds found in cereals can now be killed with herbicides and with most, the farmer has a choice of chemicals.

Two more new products are now available and these have several advantages over other herbicides.

Chemical Ploughing, Geoffrey A. Pearce

Journal of the Department of Agriculture, Western Australia, Series 4

PROGRESS in the field of chemical weed control has been spectacular in recent years. One field that is attracting interest is the idea of replacing cultivation with chemical sprays.