Open Access. Powered by Scholars. Published by Universities.®

Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Chemistry

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 2551 - 2580 of 3581

Full-Text Articles in Chemistry

Electrocatalytic Performance Of Carbon Supported Au-Ir Catalyst As Cathodic Catalyst In Direct Formic Acid Fuel Cell, Wei Chen, Ya-Wen Tang, Tain-Hong Lu Aug 2008

Electrocatalytic Performance Of Carbon Supported Au-Ir Catalyst As Cathodic Catalyst In Direct Formic Acid Fuel Cell, Wei Chen, Ya-Wen Tang, Tain-Hong Lu

Journal of Electrochemistry

In this paper,it is reported for the first time that the electrocatalytic activities of the carbon supported Au(Au/C),carbon supported Ir(Ir/C) and the carbon supported Au-Ir(Au-Ir/C) catalysts prepared in the aqueous solution with tetrahydrofuran(THF) for the oxidation of formic acid and for the oxygen reduction were compared.It was found that all three catalysts showed no electrocatalytic activity for the oxidation of formic acid,but the electrocatalytic activity of the Au-Ir/C catalyst for oxygen reduction was much better than those of Au/C and Ir/C.Thus,the Au-Ir/C catalyst is suitable to be used as the cathodic catalyst in Direct formic acid fuel cell(DFAFC).


Preliminary Study Of Single Flow Zinc-Nickel Battery, Li Zhang, Jie Cheng, Yu-Sheng Yang, Yue-Hua Wen, Xin-Dong Wang, Zi-Li Xie Aug 2008

Preliminary Study Of Single Flow Zinc-Nickel Battery, Li Zhang, Jie Cheng, Yu-Sheng Yang, Yue-Hua Wen, Xin-Dong Wang, Zi-Li Xie

Journal of Electrochemistry

The micromorphology of zinc electrodeposited at different currents in the flowing electrolyte was studied.It has been shown that the structure of the zinc became compacted with the increase of the charge current density and no zinc dendrite was presenct.A cell with 2Ah capacity was assembled and the charge-discharge test was performed.The results showed that the average charge voltage was 1.84V and the average discharge voltage was 1.65V.The high efficiencies can be achieved with an average coulombic efficiency of 97% and energy efficiency of 86% over 1000 cycles.


Direct Electrochemistry Of Hemoglobin On The Electrode Modified With Ddab And Swcnt, Wen-Jing Hou, Lin Zhou, Xia-Qin Wu, Hong-Xia Zhang, Wen Xie, Liu Yang, Zhong-Qing Lu Aug 2008

Direct Electrochemistry Of Hemoglobin On The Electrode Modified With Ddab And Swcnt, Wen-Jing Hou, Lin Zhou, Xia-Qin Wu, Hong-Xia Zhang, Wen Xie, Liu Yang, Zhong-Qing Lu

Journal of Electrochemistry

Hemoglobin(Hb) was immobilized onto the surface of glassy carbon electrode with the single-wall carbon nanotubes and surfactant didodecyldimethylamonium bromide(DDAB) modified previously and its electrochemical behaviors have been investigated by cyclic voltammetry.A pair of well-defined redox peaks has been obtained.Cyclic voltammetry and electrochemical impedance spectroscopy(EIS) were also used to study on the effect of different concentration of SWCNT in DDAB.The result shows that the 1 mg/mL is the best choice.The dependence of E0' on solution pH with the slope of 39 mV/pH,indicated that redox of the Hb is a one electron reaction with two protons transfer.The results also showed …


The Effect Of Ru: Sn On Properties Of Ru-Ir-Sn Oxide Anode Coatings, Lei Ji, Jun-Tao Wang, Wen-Bin Liu, Li-Kun Xu, Gui-Lin Xue Aug 2008

The Effect Of Ru: Sn On Properties Of Ru-Ir-Sn Oxide Anode Coatings, Lei Ji, Jun-Tao Wang, Wen-Bin Liu, Li-Kun Xu, Gui-Lin Xue

Journal of Electrochemistry

The anode coatings of Ru-Ir-Sn oxide with different Ru/Sn ratios were prepared by sol-gel method.The influences of Ru/Sn ratio on properties of anode coatings were studied by scanning electron microscope(SEM),energy dispersive X-ray detector(EDX),X-ray diffraction(XRD).The potential of chlorine evolution,current efficiency,accelerated life,cyclic vohammetry and electrochemical impedance spectroscopy(EIS) tests were carried out.The results showed that there was an obvious effect of Ru/Sn ratio on the morphology of the coatings.The cyclic voltammogram,double layer capacitances and accelerated life of anode coatings had a tendency to fall down firstly then increased as the Ru% increased,the current effency and potential of chlorine evolution had a tendency to …


Hydrolysis Of Sodium Borohydride By Ru-Ni Foam Catalyst, Jie Cheng, Feng Ye, Tong-Tao Wang, Jing-Jing Li, Yong-Liang Wang, Xin-Dong Wang Aug 2008

Hydrolysis Of Sodium Borohydride By Ru-Ni Foam Catalyst, Jie Cheng, Feng Ye, Tong-Tao Wang, Jing-Jing Li, Yong-Liang Wang, Xin-Dong Wang

Journal of Electrochemistry

This paper presented a method of hydrogen generation from sodium borohydride solution for fuel cells.The Ru-Ni foam catalyst which was prepared by chemical plating showed strong activity and stability.The pretreatment of Ni foam before chemical plating was very important for the catalyst's strong activity and stability.This easy-to-prepared catalyst exhibited a good activity after being used several times.The effects of NaBH4 concentration,temperature and used times on the hydrogen generation rate were investigated.The results showed that the rate was remarkablely increased with the temperature rising and the rate increased more than ten times when the temperature of reaction rised from 15 …


Design And Fabrication Of The High Efficient Platinum-Nanoporous Gold Catalysts, Zhao-Na Liu, Jin-Tao Zhang, Fang Tian, Peng-Peng Liu, Hou-Yi Ma, Yi Ding Aug 2008

Design And Fabrication Of The High Efficient Platinum-Nanoporous Gold Catalysts, Zhao-Na Liu, Jin-Tao Zhang, Fang Tian, Peng-Peng Liu, Hou-Yi Ma, Yi Ding

Journal of Electrochemistry

The nanoporous gold(NPG) electrodes with uniform pore sizes and ligaments were prepared by using a simple dealloying method.The as-prepared NPG showed high catalytic activity towards the oxidation of formic acid and formaldehyde.After tiny amount of platinum was deposited onto the NPG substrate,not only the structure stability of NPG was greatly improved,but also the Pt-Au bimetallic catalysts displayed the better catalytic activity and the stronger poison resistance towards the electrooxidation of small organic molecules than the bulk platinum due to synergistic effect between Au and Pt compositions.


Study On Electrocatalytic Oxidation Of Salbutamol At Carbon Nanotubes Modified Electrode, Ying-Liang Wei, Lu-Ping Zhang, Chen Shao, Hui Feng, Xian-Li Li Aug 2008

Study On Electrocatalytic Oxidation Of Salbutamol At Carbon Nanotubes Modified Electrode, Ying-Liang Wei, Lu-Ping Zhang, Chen Shao, Hui Feng, Xian-Li Li

Journal of Electrochemistry

The multi-wall carbon nanotubes(MWNT) were dispersed successfully into water in the presence of dihexadecyl hydrogen phosphate(DHP) and a stable well-distributed suspension.A was formed sensor based on the multi-carbon nanotubes film coated glassy carbon electrode was developed.The electrochemical response of salbutamol was studied by square wave voltammetry.The oxidation peak potential of salbutamol at the modified electrode was observed at 0.604 V,which shifted about 40 mV negatively.The peak current increased 4.5 folds,in contrast to that at a bare electrode.Under optimal measurement conditions,there was a good linear relationship between the peak current(Ipa) and salbutamol concentration(C) in the range from 8.3 × 1 0 …


A Study Of Pd-Ir On Nickel Foam Cathode For Aluminum-Hydrogen Peroxide Semi-Fuel Cells, Ding-Wang Zhu, Dan-Dan Chen, Bi-Jin Li, Gui-Ling Wang, Dian-Xue Cao Aug 2008

A Study Of Pd-Ir On Nickel Foam Cathode For Aluminum-Hydrogen Peroxide Semi-Fuel Cells, Ding-Wang Zhu, Dan-Dan Chen, Bi-Jin Li, Gui-Ling Wang, Dian-Xue Cao

Journal of Electrochemistry

The Pd-Ir/Ni electrodes were prepared by electrodeposition of Pd and Ir on the porous nickel foam surface.The structure,composition and state of the Pd-Ir catalyst were analyzed using SEM and XPS.The catalytic performance of Pd-Ir/Ni for H2O2 electroveduction at different concentrations of H2O2 were investigated.A limiting current density of 318 mA/cm2 was obtained with 0.4 mol/L H2O2.The aluminum-hydrogen peroxide semi-fuel cells using different aluminum alloys as anode and Pd-Ir/Ni as cathode were assembled and tested.It was found that the fuel cell with aluminum-manganese alloy anode demonstrated a maximum power density …


Electrocatalytic Oxidation Of Salicylic Acid At Novel Gold Nanoparticle-Modified Glassy Carbon Electrode, Yan-Ping Cui, Chang-Zhu Yang, Jian Huang, Wen-Hong Pu, Jing-Dong Zhang Aug 2008

Electrocatalytic Oxidation Of Salicylic Acid At Novel Gold Nanoparticle-Modified Glassy Carbon Electrode, Yan-Ping Cui, Chang-Zhu Yang, Jian Huang, Wen-Hong Pu, Jing-Dong Zhang

Journal of Electrochemistry

A gold nano-particles modified glassy carbon electrode(GNP/GCE) was prepared by the"seed-mediated gold nano-particles growth method".Field emission scanning electron microscopy,ultraviolet-visible(UV-vis) spectroscopy analysis and electroalaylsis were employed to study the morphology and electrochemical performances.The resulting electrode showed excellent electro-catalytic activity toward the oxidation of salicylic acid and the response sensitivity was 1.8 fold than that obtained on GCE.Good linear relationship was obtained between response current and salicylic acid concentration in the range of 5.0 × 10-7 ~8.0 × 10-5 mol/L,which could be used in the detection of trace salicylic acid.


Direct Electrochemistry Of Hemoglobin Immobilized On The Electrode Modified With Ionic Liquid And Kgm, Liu Yang, Xia-Qin Wu, Wen-Jing Hou, Lin-Fei Gu, Rong Wang, Xiao-Ming Guo, Zong-Rang Zhang Aug 2008

Direct Electrochemistry Of Hemoglobin Immobilized On The Electrode Modified With Ionic Liquid And Kgm, Liu Yang, Xia-Qin Wu, Wen-Jing Hou, Lin-Fei Gu, Rong Wang, Xiao-Ming Guo, Zong-Rang Zhang

Journal of Electrochemistry

Hemoglobin(Hb) has been immobilized on a glassy carbon electrode(GCE) surface with konjac glucomannan(KGM) and room temperature ionic liquid(RTIL).And which electrochemical behaviors have been investigated by cyclic voltammetry.The results shown that the entrapped Hemoglobin undergoes fast direct electron transfer reactions with formal potential of-0.38V(vs.SCE) and the E0' is linearly dependent on solution pH with a slope value of 51 mV/pH,due to the electron transfer of HbFe3+/HbFe2+ redox couple companied with a proton transfer.The electrocatalytic reduction of oxygen was also explored at the Hb-KGM/RTIL/Nafion/ GC electrode.


Performance Of Magnetic Field Coupled With Electrochemical Process For Preparing Polyaluminum Chloride, Ke-Wu Pi, Wen-Qi Gong, Zheng-Qing Huang Aug 2008

Performance Of Magnetic Field Coupled With Electrochemical Process For Preparing Polyaluminum Chloride, Ke-Wu Pi, Wen-Qi Gong, Zheng-Qing Huang

Journal of Electrochemistry

Polyaluminum chloride(PAC) was prepared by electrochemical process coupled with magnetic field paralleling to the gravitation direction.The electrolyte of 0.1 M AlCl3 solution was used,with the iron plates as cathode and aluminum sheets as anode.PAC of 0.6 M total aluminum(AlT),83.2% Alb to AlT and basicity(Ba)=2.4 was synthesized when magnetic flux density was 0.4T,the distance of electrodes was 15 mm,the voltage of electrolysis cell was 2.4 V and current density was 300 A/m2.Under above experimental conditions,the voltage efficiency,energy efficiency and electrodes surface area to reduction cells of electrochemical reactor were 85.2%,81.5% and 140.1m2/m3,respectively.The polarization curves determined by constant-current method showed that the …


Applications Of Electroless Deposition Ni-Cu-P Coating On The Gas Condensing Exchanger, Li-Jun Yang, Gui-Chang Liu, Sui-Lin Wang, Zhi-Cong Shi Aug 2008

Applications Of Electroless Deposition Ni-Cu-P Coating On The Gas Condensing Exchanger, Li-Jun Yang, Gui-Chang Liu, Sui-Lin Wang, Zhi-Cong Shi

Journal of Electrochemistry

The effects of copper sulfate concentration in the plating solution on the composition,the structure and the anticorrosion properties of Ni-Cu-P deposited coating were studied by EPMA, XRD and polarization curves.The anticorrosion properties of Ni-Cu-P deposited coating was optimal as the copper sulfate concentration in the plating solution was 0.5 g·L-1. The electrochemical anticorrosion properties of Ni-Cu-P, Ni-P deposited coatings and copper plates were investigated in the gas condensate. The self-corrosion potential of Ni-Cu-P deposited coatings was low, the self-corrosion current density was small, and the electrochemical impedance was the highest. Therefore, the electroless Ni-Cu-P coatings can be used …


Preparation And Supercapacitive Properties Of Co(Oh)2/Nay Composite, Chi Ma, Ling-Bin Kong, Yong-Chun Luo, Long Kang Aug 2008

Preparation And Supercapacitive Properties Of Co(Oh)2/Nay Composite, Chi Ma, Ling-Bin Kong, Yong-Chun Luo, Long Kang

Journal of Electrochemistry

The Co(OH)2/NaY composite was prepared by chemical precipitation method and then tested as an active electrode material for an electrochemical supercapacitor.The results indicated that the composite displayed superior capacitive performance.The maximum specific capacitance of Co(OH)2 was 632.5 F/g.The structure and electrochemical properties of the composite were also discussed.


Study Of Triethyl Phosphate Self-Assembled Films On Iron For Corrosion Inhibition, Wen-Juan Guo, Shen-Hao Chen, Wei He, Xue-Hui Pang, Yuan-Yuan Feng Aug 2008

Study Of Triethyl Phosphate Self-Assembled Films On Iron For Corrosion Inhibition, Wen-Juan Guo, Shen-Hao Chen, Wei He, Xue-Hui Pang, Yuan-Yuan Feng

Journal of Electrochemistry

The self-assembled film of triethyl phosphate(TEP) formed on the iron surface was found to protect iron from corrosion in 0.5 mol·L-1 H2SO4 efficiently. The inhibition effects were investigated using the electrochemical impedance spectroscopy(EIS).EIS demonstrated that the charge-transfer resistance of the electrode covered with TEP film was greater than that of the naked iron electrodes and the inhibition efficiency of TEP film increased quickly in the initial period and then increased slowly. Quantum chemical calculations provide information about the process of adsorption of molecules on the metal surface at the molecular level.


Corrosion Inhibition Of Self-Assembled Films On Iron By Electrochemical Impedance Spectroscopy, Yuan-Yuan Feng, Shen-Hao Chen, Juan-Juan Zhou, Wen-Juan Guo Aug 2008

Corrosion Inhibition Of Self-Assembled Films On Iron By Electrochemical Impedance Spectroscopy, Yuan-Yuan Feng, Shen-Hao Chen, Juan-Juan Zhou, Wen-Juan Guo

Journal of Electrochemistry

The self-assembled films of tetradecylamine were formed on iron surface, and the inhibition ability of which for iron corrosion in 0.5 mol/L H2SO4 solutions was studied by electrochemical impedance spectroscopy technique. Results indicated that longer immersion time would result in stronger inhibition ability of the films. The maximal inhibition efficiency(IE) of the tetradecylamine films was 68.7%. When the tetradecylamine films were modified by dodecylthiol, the mixed films became denser and more stable, thus the inhibition ability increased remarkably. The η of the mixed films increased to 78.2%.


Working Report On The Status Quo Of Nanomaterials Impact On Health And Environment, Harald Krug, Margarita Apostolova, Marite Arija Bake, Gordon Chambers, Horia Chiriac, Eva Herzog, Victoria Hand, Jürgen Höck, Peter Hoet, Nicoleta Lupu, Declan Mccormack, Maja Remskar, George Robillard, Jamila Smisterova, Jan Stetkiewicz, Speranta Tanasescu, Aris Tsatsakis, David Vaughn, Peter Wick, Jörg Wörle-Knirsch Jun 2008

Working Report On The Status Quo Of Nanomaterials Impact On Health And Environment, Harald Krug, Margarita Apostolova, Marite Arija Bake, Gordon Chambers, Horia Chiriac, Eva Herzog, Victoria Hand, Jürgen Höck, Peter Hoet, Nicoleta Lupu, Declan Mccormack, Maja Remskar, George Robillard, Jamila Smisterova, Jan Stetkiewicz, Speranta Tanasescu, Aris Tsatsakis, David Vaughn, Peter Wick, Jörg Wörle-Knirsch

Articles

Nanotechnology is regarded as one of the key technologies of the future and associated with high expectations by politics, science and economy. Artificially produced nanosized particles and nanoscale system components have new properties which are of importance for the development of new products and applications. Such new properties of materials and substances result from the special properties of surfaces and interfaces and in part, from the geometric shape of the material. In theory nanoparticles (NPs) can be produced from nearly any chemical; however, most NPs that are currently in use today have been made from transition metals, silicon, carbon (single-walled …


Synthesis And Electrochemical Characteristics Of Li[Li(0.167)Mn(0.583)Ni(0.25)]O2 Cathode Material, Ling-Yan Yu, Wei-Hua Qiu, Fang Lian, Jia-Yuan Huang, Xao-Li Kang, Wei Liu May 2008

Synthesis And Electrochemical Characteristics Of Li[Li(0.167)Mn(0.583)Ni(0.25)]O2 Cathode Material, Ling-Yan Yu, Wei-Hua Qiu, Fang Lian, Jia-Yuan Huang, Xao-Li Kang, Wei Liu

Journal of Electrochemistry

The cathode material of Li[Li0.167Mn0.583Ni0.25]O2 was synthesized by low-heat solid state reaction.The results of XRD and FESEM indicated that the powders of the material were well crystallized with the uniform diameters ranging from 60 nm to 100 nm and could be indexed as α-NaFeO2 structure(R3-m space). Galvanostatic charge-discharge tests showed that the electrode delivered the capacity of about 120 mAh/g with good cyclability when cycled in 2.5~4.4V at 0.5C. When the cut-off potential was set up to 4.6V, the cathode delivered much larger capacities with the maximum of 234 mAh/g. It was …


Performance Of Air Breathing Direct Methanol Fuel Cell Under Ambient Condition, Jian-Guo Liu, Jun Gu, Tao Yu, Zhi-Gang Zou, T.S Zhao May 2008

Performance Of Air Breathing Direct Methanol Fuel Cell Under Ambient Condition, Jian-Guo Liu, Jun Gu, Tao Yu, Zhi-Gang Zou, T.S Zhao

Journal of Electrochemistry

The performance of the passive DMFC was systematically investigated under an ambient condition by simulating a wide range of temperature and humidity in a high-quality environmentally controlled room.The results indicated that the performance of the passive DMFC was nearly independent of ambient humidity from 30% to 90% RH and water produced in the cathode was expelled mostly from the cell in a liquid state.Compared with the humidity,the ambient temperature has a significant effect on the performance of the passive DMFC.The power density of 30 mW·cm-2 were obtained at 40℃,while only 10 mW·cm-2 at 10 ℃.


Structure And Property Of Molecular Self-Assembled Membrane With Zirconium Ion, Tian-De Wang, Rong Wang, Xia-Qin Wu, Zhi-Gang Guo, Wei-Wei Ji May 2008

Structure And Property Of Molecular Self-Assembled Membrane With Zirconium Ion, Tian-De Wang, Rong Wang, Xia-Qin Wu, Zhi-Gang Guo, Wei-Wei Ji

Journal of Electrochemistry

According to the complex interaction between dodecyl phosphonate and stainless steel surface as well as the zirconium ion,the self-assembled monolayer and double-layer dodecyl phosphonate modified 304 type stainless steel electrode were prepared.The electrodes were characteristiced by static contact angles and electrochemical polarization methods.The results suggested that the double-layer modified stainless steel electrode had better corrosion inhibition effect than the monolayer modified electrode.


Electrodeposition Of Sol-Gel Imprinted Films Modified Electrode And Its Application For 3,4-Dihydroxybenzoic Acids Determination, Gui-Lin Wang, Rong Wang, Xia-Qin Wu, Zong-Rang Zhang May 2008

Electrodeposition Of Sol-Gel Imprinted Films Modified Electrode And Its Application For 3,4-Dihydroxybenzoic Acids Determination, Gui-Lin Wang, Rong Wang, Xia-Qin Wu, Zong-Rang Zhang

Journal of Electrochemistry

The sol-gel molecularly imprinted films modified glassy carbon electrode was prepared by electrodeposition of tetramethoxysilane(TMOS) and phenyltrimethoxysilane(PTMOS) with chronoamperometry in the presence of template molecules 3,4-dihydroxybenzoic acid(3,4-DHBA) followed by extraction with ethanol.The modified electrode could successfully avoid the polymerization of oxidized 3,4-DHBA and the interference of 2,4-DHBA.A linear concentration response curve was obtained from 1.0 × 10-5 mol·L-1 to 8.0×10-4 mol·L-1,with the detected concentration limit of 5.0 × 10-6 mol·L-1.


Electrochemical Performances Of Copper/Activated Carbon Composites, Lan-Ting Li, Qiang Xie, Wen Yan, Yan-Yan Wang, Wen-Wen Xing May 2008

Electrochemical Performances Of Copper/Activated Carbon Composites, Lan-Ting Li, Qiang Xie, Wen Yan, Yan-Yan Wang, Wen-Wen Xing

Journal of Electrochemistry

The development and improvement of electrode materials can result in the enhancement of the performances of electrochemical capacitor.In this paper various copper/activated carbon composites were prepared in the presence of different amounts(from 0% to 40%) of copper nitrate from bituminous coal.Then different electrodes were prepared from copper oxide,activated carbon and copper/activated carbon composites,respectively,and were characterized by cyclic voltammetry,alternative current(AC) impedance,charge-discharge at constant current and maintenance of the self-potential.The results showed that the proper amount of copper in copper/activated carbon composites positively influenced the electrochemical performances of electrodes,and the capacitance of copper/activated carbon composites was larger than that of the total …


Preparation Of Zn-Ni Alloy Whisker By Electrochemical Method, Zhen-Hai Liang, Xi-Hua Xia May 2008

Preparation Of Zn-Ni Alloy Whisker By Electrochemical Method, Zhen-Hai Liang, Xi-Hua Xia

Journal of Electrochemistry

The Zn-Ni alloy whiskers were prepared by electrochemical method and were characterized by XRD, SEM and EDS methods. The results showed that Ni5Zn21 and Ni3Zn22 whiskers were obtained with the length of 2~4 μm and the diameter of 250 nm, thereby the rations of length/diameter fell between 8 and 16. The electrochemical behavior was investigated by cyclic voltammetry method simultaneously. A new method was provided on whisker preparation based on this work.


Carbon Nanotube Array Electrodes Based Supercapacitors With 3.5v Working Voltage, Hao Zhang, Gao-Ping Cao, Yu-Sheng Yang, Zhen-Nan Gu, Bin Xu, Wen-Feng Zhang May 2008

Carbon Nanotube Array Electrodes Based Supercapacitors With 3.5v Working Voltage, Hao Zhang, Gao-Ping Cao, Yu-Sheng Yang, Zhen-Nan Gu, Bin Xu, Wen-Feng Zhang

Journal of Electrochemistry

The carbon nanotube arrays(CNTA) were grown directly on the substrates of Ta and stainless steel by chemical vapor deposition.The button-like supercapacitors were fabricated based the CNTA electrodes.The electrochemical performance of CNTA based supercapacitors presentsed high working voltage(3.5 V),long cycle life,and good rate capability.The power and energy densities are were 928 kW·kg-1 and 19 Wh·kg-1,respectively(based on the mass of CNTA).


Direct Electrochemistry Of God On Glassy Carbon Electrode Modified With Mesoporous Carbon, Kun-Qi Wang, Lin Zhu, Wei Xing May 2008

Direct Electrochemistry Of God On Glassy Carbon Electrode Modified With Mesoporous Carbon, Kun-Qi Wang, Lin Zhu, Wei Xing

Journal of Electrochemistry

Glucose oxidase(GOD) is immobilized on glassy carbon electrode mesoporous carbon by simple method.Cyclic voltammetric results indicated that on GOD of the modified electrode a quasi-reversible redox reaction took place(GCE) surface modified at a formal potential of-0.4294 V in 0.1 mol/L phosphate buffer solution(PBS)(pH 7.1).The electrochemical reaction consisted of a two-electron transfer coupled with a two-proton transfer.The GOD can completely catalyze oxidation of glucose via electron transfer intermedia of ferrocene monocarboxylic acid(FMCA) in saturated solutions with N2.The bioactivity of GOD on the modified electrode with mesoporous carbon was obviously unattacked.


Electrochemical Performance Of C-Lifepo4 By Polyaniline Doping, Wei Wang, Li-Fang Jiao, Hua-Tang Yuan May 2008

Electrochemical Performance Of C-Lifepo4 By Polyaniline Doping, Wei Wang, Li-Fang Jiao, Hua-Tang Yuan

Journal of Electrochemistry

The olivine LiFePO4 cathode materials were synthesized using the solid state method in an inert atmosphere by doping polyaniline into the C-LiFePO4.It was found that the electrochemical performance of polyaniline-doped C-LiFePO4 slightly improved.At a low discharging rate(0.1C), the capability of(C-LiFePO4)0.9(PANI)0.1 reached 164 mAh·g-1.When the charge-discharge rate is increased to 0.5C and 1.0C,the showed capacities of 121.6 mAh·g-1 and 110.1 mAh·g-1 were obtained,respectively.


Electroless-Deposition Synthesis Of Highly Active Ptru/C And Ptrusn/C As Anode Catalysts For Defc, Jing Zhu, Yi Su, Hua Ma, Fang-Yi Cheng, Zhan-Liang Tao, Jing Liang, Jun Chen May 2008

Electroless-Deposition Synthesis Of Highly Active Ptru/C And Ptrusn/C As Anode Catalysts For Defc, Jing Zhu, Yi Su, Hua Ma, Fang-Yi Cheng, Zhan-Liang Tao, Jing Liang, Jun Chen

Journal of Electrochemistry

In this paper,the preparation,characterization,and ethanol electrocatalytic oxidation of Pt0.5Ru0.5/C and Pt0.5Ru0.15Sn0.35/C electrocatalysts were reported.The electroless-deposition with sensitization-activation pretreatment was applied to prepare Pt0.5Ru0.5/C and Pt0.5Ru0.15Sn0.35/C electrocatalysts. The XRD and TEM analyses showed that the as-prepared catalysts were composed of well-dispersed PtRu or PtRuSn nanoparticles with an average particle size of about 3 nm.The electrochemical measurements demonstrated that the as-prepared Pt0.5Ru0.5/C and Pt0.5Ru0.15Sn0.35/C catalysts exhibited much enhanced peak current density for …


Electrocatalytic Performance Of Pt/C And Pt/Wo3/C Catalysts For Methanol Oxidation, Yuan-Yuan Chu, Bing Wu, Ya-Wen Tang, Tian-Hong Lu, Ying Gao May 2008

Electrocatalytic Performance Of Pt/C And Pt/Wo3/C Catalysts For Methanol Oxidation, Yuan-Yuan Chu, Bing Wu, Ya-Wen Tang, Tian-Hong Lu, Ying Gao

Journal of Electrochemistry

The catalysts of Carbon supported Pt(Pt/C) and carbon supported Pt/WO3(Pt/WO3/C) were prepared with liquid phase reduction method.It was found that the catalytic activity and stability of the Pt/WO3/C catalysts were increased with the addition of WO3.When the atomic ratio of Pt and W was 1∶1,the best electrocatalytic performance of the Pt/WO3/C catalyst for the methanol oxidation was obtained.This is attributed to the larger electrochemical surface area of Pt/WO3/C and the weeker adsorption of CO towards the catalyst.


Preparation And Electrochemical Capacitance Of Spherical-Like Polypyrrole Doped With Heparin Sodium, Hong-Yu Mi, Xiao-Gang Zhang, Su-Dong Yang, Xiang-Guo Ye May 2008

Preparation And Electrochemical Capacitance Of Spherical-Like Polypyrrole Doped With Heparin Sodium, Hong-Yu Mi, Xiao-Gang Zhang, Su-Dong Yang, Xiang-Guo Ye

Journal of Electrochemistry

Spherical-like polypyrrole with an average diameter of 100 nm as the electrode material for supercapacitor was prepared by a self-assembly process with heparin sodium salt as the dopant at-10 ℃.The morphology and electrochemical properties were characterized by transmission electron microscopy(TEM),cyclic voltammetry(CV),galvanostatic charge/discharge and electrochemical impedance spectroscopy(EIS) measurements.The results showed that the polypyrrole doped with heparin sodium salt exhibited good capacitive behavior.The specific capacitance of single electrode was up to 338 F/g at 3 mA/cm2.


Synthesis Of Agv3O8 As High-Capacity Of Cathode Materials For Lithium Secondary Batteries Via A Soft Chemistry Technique, Xiao-Yu Cao, Tao Li, Ling-Ling Xie, Xiang-Yang Yan, Chi-Wei Wang May 2008

Synthesis Of Agv3O8 As High-Capacity Of Cathode Materials For Lithium Secondary Batteries Via A Soft Chemistry Technique, Xiao-Yu Cao, Tao Li, Ling-Ling Xie, Xiang-Yang Yan, Chi-Wei Wang

Journal of Electrochemistry

The layered cathode material of AgV3O8 has been prepared for the lithium secondary batteries via the soft chemistry technique. The so-synthesized powders were characterized by XRD(powder X-ray diffraction), SEM(scanning electron microscope) and LPSA(laser particle size analysis). The electrochemical property was investigated by the galvanostatic discharge-charge technique. The results indicated that the particale sizes of AgV3O8 prepared were small in the distribution of narrow range, which leads to high discharge capacity. Among them, the material synthesized at 400 ℃ displayed the first discharge capacity of 760.5 mAh/g.


Passivation Behaviors Of Mo, W Electrodes In Mgcl2-Kcl-Nacl-Cacl2 Molten Salt For Electrolysis Of Magnesium, Ye Chen, Ke Ye May 2008

Passivation Behaviors Of Mo, W Electrodes In Mgcl2-Kcl-Nacl-Cacl2 Molten Salt For Electrolysis Of Magnesium, Ye Chen, Ke Ye

Journal of Electrochemistry

The discharge process and passivation behaviors of Mg(Ⅱ) on cathode(Mo, W) in MgCl2-KCl-NaCl-CaCl2 molten salt system had been investigated by means of cyclic voltammetry and chronoamperometry. The composition of molten salt was MgCl(10%) + CaCl(20%) + NaCl(60%) + KCl(10%)(by mass) and the temperature of electrolysis was 725 ℃. The deposition potential of Mo was 37 mV more negative than that of W, while the peak current was sharper than Mo according to the voltammograms at 0.05 V/s, indicating that the passivation on Mo cathode is easier than W. The formation of MgO impurities during the electrolysis could …