Chemistry Commons^™

Preface To The Special Issue On Lithium-Sulfur Batteries, Jia-Jia Chen, Ren-Jie Chen, Zhong Jin

Journal of Electrochemistry

No abstract provided.

Chatgpt As Metamorphosis Designer For The Future Of Artificial Intelligence (Ai): A Conceptual Investigation, Amarjit Kumar Singh (Library Assistant), Dr. Pankaj Mathur (Deputy Librarian)

Library Philosophy and Practice (e-journal)

Abstract

Purpose: The purpose of this research paper is to explore ChatGPT’s potential as an innovative designer tool for the future development of artificial intelligence. Specifically, this conceptual investigation aims to analyze ChatGPT’s capabilities as a tool for designing and developing near about human intelligent systems for futuristic used and developed in the field of Artificial Intelligence (AI). Also with the helps of this paper, researchers are analyzed the strengths and weaknesses of ChatGPT as a tool, and identify possible areas for improvement in its development and implementation. This investigation focused on the various features and functions of ChatGPT that …

Description Of Reaction And Vibrational Energetics Of Co2-Nh3interaction Using Quantum Computing Algorithms, Manh Tien Nguyen, Yueh-Lin Lee, Dominic Alfonso, Qing Shao, Yuhua Duan

Markey Cancer Center Faculty Publications

CO2 capture is critical to solving global warming. Amine-based solvents are extensively used to chemically absorb CO2. Thus, it is crucial to study the chemical absorption of CO2 by amine-based solvents to better understand and optimize CO2 capture processes. Here, we use quantum computing algorithms to quantify molecular vibrational energies and reaction pathways between CO2 and a simplified amine-based solvent model—NH3. Molecular vibrational properties are important to understanding kinetics of reactions. However, the molecule size correlates with the strength of anharmonicity effect on vibrational properties, which can be challenging to address using classical computing. Quantum computing can help enhance molecular …

Recent Advances In Anode Materials Of Solid Oxide Electrolysis Cells, Geng Zou, Wei-Cheng Feng, Yue-Feng Song, Guo-Xiong Wang

Journal of Electrochemistry

Solid oxide electrolysis cell (SOEC) as an electrochemical energy conversion device has attracted increasing attention due to its large current density, high Faradaic efficiency and energy efficiency. Oxygen evolution reaction at the anode, a four-electron transfer process, is an important half-reaction for SOEC, which contributes to the main polarization resistance and consumes most electric energy during the electrolysis process. Hence, designing anode materials with high activity and stability is crucial for the performance improvement and practical application of SOEC. Recently, some advances have been made in the development of high-performance anode. In the current review, the mechanisms for CO_{2 …}

Anodic Electrocatalysis Of Glycerol Oxidation For Hybrid Alkali/Acid Electrolytic Hydrogen Generation, Xin Feng, Bo-Wen Liu, Ke-Xin Guo, Lin-Feng Fan, Gen-Xiang Wang, Su-Qin Ci, Zhen-Hai Wen

Journal of Electrochemistry

Electrolytic hydrogen production is heavily restricted by high-energy consumption majorly due to the relatively high potential of anodic oxygen evolution reaction (OER). Development of OER-alternative reaction at the anode has been recently proposed as a promising pathway to address the associated issues. In this work, we report a hybrid acid/alkali dual-electrolyte electrolyzer by coupling acidic hydrogen evolution reaction (HER) using commercial Pt/C cathode with alkaline Electrocatalytic glycerol oxidation (GOR) which is implemented by developing a nickel foam (NF) supporting Co₃O₄ nanosheets anode that shows low overpotential and high selectivity toward GOR for formate production. The hybrid acid/alkali …

Highly Dispersed Pt Nanoparticles Root In Single-Atom Fe Sites In Ldhs Toward Efficient Methanol Oxidation, Qing-Cheng Meng, Lin-Bo Jin, Meng-Ze Ma, Xue-Qing Gao, Ai-Bing Chen, Dao-Jin Zhou, Xiao-Ming Sun

Journal of Electrochemistry

Active and durable electrocatalysts for methanol oxidation reaction are of critical importance to the commercial viability of direct methanol fuel cell, which has already attracted growing popularities. However, current methanol oxidation electrocatalysts fall far short of expectations and suffer from excessive use of noble metal, mediocre activity, and rapid decay. Here we report the Pt anchored on NiFe-LDHs surface hybrid for stable methanol oxidation in alkaline media. Based on the high intrinsic methanol oxidation activity of Pt nanoparticles, the substrates NiFe-LDHs further enhanced anti-poisoning ability and maintained unaffected stability after 200,000 s cycle test compared to commercial Pt/C catalyst. The …

Preface To Special Issue On Electrocatalysis And Electrosynthesis, Fang-Yi Cheng, Shuang-Yin Wang, Tian-Hua Zhou

Journal of Electrochemistry

No abstract provided.

Advances And Challenges On Cathode Catalysts For Lithium-Oxygen Batteries, Bo Wen, Zhuo Zhu, Fu-Jun Li

Journal of Electrochemistry

Aprotic lithium-oxygen batteries (LOBs) with high theoretical energy density have received considerable attention over the past years. However, the oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) at cathodes suffer from slow kinetics for large overvoltages in LOBs. Significant advances on catalysts have been achieved to accelerate cathode kinetics, but understanding on the formation/decomposition processes of Li₂O₂ is limited. Herein, this review highlights the fundamental understanding of the correlation between catalysts and formation/decomposition of Li₂O₂. Various types of cathode catalysts are discussed to reveal the mechanism of formation/decomposition of Li₂O₂, …

Coreflooding Evaluation Of Fiber-Assisted Recrosslinkable Preformed Particle Gel Using An Open Fracture Model, Shuda Zhao, Ali Al Brahim, Junchen Liu, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Recrosslinkable Preformed Particle Gels (RPPGs) Have Been Used to Treat the Problem of Void Space Conduits (VSC) and repair the "Short-Circuited" Waterflood in Alaska's West Sak Field. Field Results Showed a 23% Increase in Success Rates over Typical Preformed Particle Gel (PPG) Treatments. in This Paper, We Evaluated Whether Adding Fiber into RPPGs Can Increase the RPPG Plugging Efficiency and Thus Further Improve the Success Rate. We Designed Open Fracture Models to Represent vs.C and Investigated the Effect of Swelling Ratio (SR), Fracture Size, and Fiber Concentration on Gel Injection Pressure, Water Breakthrough Pressure, and Permeability Reduction. Results Show that …

Design And Applications Of Fmoc-Histidine And Aspartic Acid Tripeptides As Proton Conductive Materials, Shejla S. Pollozi

Dissertations, Theses, and Capstone Projects

The increasing demand for clean and sustainable energy has driven forward rapid improvements in polymer-electrolyte fuel cells and the use of ion-conducting polymers (ionomers) as proton exchange membranes and catalyst binders. While perfluorinated electrolytes have been commercially used as conductive membranes for nearly four decades, a new class of sustainable, conductive materials has emerged, inspired by the efficiency of charge transport processes in biological systems. These molecules, knows as peptide amphiphiles (PAs), have gained popularity as building blocks for the bottom-up fabrication of nanomaterials through supramolecular self-assembly. Supramolecular nanostructures, often in the form of hydrogels, are held together via non-covalent …

Polyethersulfone Thin-Film Nanocomposite Membrane Embedded With Amine-Functionalized Graphene Oxide For Desalination Applications, Ahmed Bahaeldin

Theses and Dissertations

Thin-film nanocomposite (TFN) desalination membranes were prepared based on a polyethersulfone (PES) support, where the polyamide (PA) layer was embedded with amine-functionalized graphene oxide (GO). The effect of adding various concentrations of functionalized and un-functionalized GO on the desalination performance, hydrophilicity, and morphology of the membranes was additionally assessed throughout this work. Scanning electron microscopy (SEM) measurements were used to assess the morphology of the membranes in combination with Brunauer-Emmett-Teller (BET) analysis. Contact angle measurements were used to gauge the hydrophilicity of the synthesized membranes. The membrane with the best desalination performance contained 1x10^-3 wt/vol% of functionalized GO in …

Recent Advances In Exploring Highly Active & Durable Pgm-Free Oxygen Reduction Catalysts, Yuan Li, Miao-Ying Chen, Bang-An Lu, Jia-Nan Zhang

Journal of Electrochemistry

In order to reduce the considerable usage of expensive but scarce platinum at the cathode in proton exchange membrane fuel cells (PEMFCs), it is necessary to pursue alternatives to platinum. The most promising platinum group metal (PGM)-free catalysts for oxygen reduction reaction (ORR) are atomically dispersed, and nitrogen-coordinated metal site catalysts denoted as M-N-C (M = Fe, Co, or Mn, etc.). Over the last few decades, there have been great advances in these catalysts with high ORR activity and promising initial fuel cell performance approaching traditional Pt/C catalysts. However, the stability of these highly active Fe-N-C catalysts under practical fuel …

Research Progress In Cucurbit[N]Uril-Based Metal Nanomaterials For Electrocatalytic Applications, Zong-Nan Wei, Min-Na Cao, Rong Cao

Journal of Electrochemistry

Metal nanomaterials have exhibited excellent performance in electrocatalytic applications, but they still face the problems of poor stability and limited regulation strategies. It is an efficient strategy for greatly enhanced catalytic activity and stability by introducing a second component. In this review, we provide the sketch for the combination of metal nanomaterials and cucurbit[n]urils (CB[n]s) in electrocatalytic applications. CB[n]s are a series of macrocycles with rigid structure, high stability, and function groups for coordinating with metal sites, which make them promising to stabilize and modulate the metal nanomaterials for ideal performance. The discussion classifies the roles of CB[n]s, involving CB[n]s …

Electrochemical Oxidation Of Ethylene On Palladium Electrode, Wei-Xing Wu, Ying Wang

Journal of Electrochemistry

The electrochemical oxidation of C₂H₄ is attracting increasing attention due to its vast potential market. The current electrochemical methods rely on the use of redox mediators, which may produce corrosive intermediates, while direct oxidation is still limited by its low activity and selectivity. Herein, we conducted electrochemical studies to obtain mechanistic insights into the benchmark Pd catalyst. The generated Pd(II) could be the active site for C₂H₄ oxidation. By designing the pulse sequence, we found the ratio of strongly and weakly adsorbed C₂H₄ on Pd to be 0.3:1. The result we …

Preface To Special Issue: Electrocatalysis And Electrosynthesis, Fang-Yi Cheng, Shuang-Yin Wang, Tian-Hua Zhou

Journal of Electrochemistry

No abstract provided.

Supperlattice-Like Structure: Ordered Mass Transfer Endowing High Quality Output Of Fuel Cell, Jian Wang, Wen-Hui Xuan, Qian He, Jing-Xia Jiang, Yuan-Yuan Zhou, Yao Nie, Qiang Liao, Min-Hua Shao, Wei Ding, Zi-Dong Wei

Journal of Electrochemistry

The current or voltage fluctuation in fuel cell operation is harmful to the fuel cell system and power application equipment. Here, we report a technique to eliminate such a fluctuation by the aid of new type of catalysts, superlattice-like mesoporous PtCo catalysts. The current fluctuation in fuel cells catalyzed by two invented catalysts are fixed at as low as 25 mA·cm⁻² with a power of 0.75 W·cm⁻² or 120 mA·cm⁻² with a power of 1.01 W·cm⁻², and no noticeable current decay was detected over 100 h. By contrast, a …

Lysine Crosslinked Polyacrylamide─A Novel Green Polymer Gel For Preferential Flow Control, Tao Song, Baojun Bai, Yugandhara Eriyagama, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Acrylamide-based polymer gels have been applied to control the preferential flow in the subsurface for decades. However, some commonly used crosslinkers, such as Cr (III) and phenol-formaldehyde, are highly toxic and are being phased out because of stringent environmental regulations. This work uses l-lysine as the green crosslinker to produce acrylamide-based polymer gels. This article systematically studied the effect of lysine and polymer concentration, salinity, pH, and temperature on gelation behavior and thermal stability. Besides, the gelation mechanism and crosslinking density were elucidated in this work. A high-permeability sandstone core was used to test the plugging efficiency of this novel …

Development Of Battery Materials To Function As Corrosion Protection On Car Body Plates, Tubagus Noor Rohmannudin, Sulistijono Sulistijono, Noval Adrinanda, Faridz Wira Dharma, Samuel Areliano

Journal of Materials Exploration and Findings

Most car bodies made for mass production are made from steel or aluminum. Both are strong metals, but steel is cheaper than aluminum and is more commonly used in lower-end cars for a broader consumer range. The weakness of steel compared to aluminum is that it is susceptible to corrosion under certain conditions, and thus it may deteriorate over time without proper care. To prevent corrosion, modern cars are coated with paint to prevent direct contact with the environment. As a second line of protection, a car battery can be connected to the body to create an impressed current cathodic …

Potential Of Biduri Fiber (Calotropis Gigantea) As Material For Oil Spill Absorbent, Anne Sukmawati, Wulan Septiani

Journal of Materials Exploration and Findings

Biduri fiber (Calotropis gigantea) is a natural hollow fiber with hydrophobic and oleophilic properties potentially used as oil spilled sorbent from seawater. This study aims to determine the absorption capacity and efficiency of the Biduri fiber and membrane to fuel oil. Measurement of oil absorption to seawater was carried out at various fiber weights (0.5-1.5 g), fiber composition (50-95%), contact time (10-90 minutes), temperature (30 and 50°C), and compared with commercial products. The results showed that the fiber weight variation of 0.5-1.5 g has an average absorption efficiency of 96.67%, and the highest absorption was obtained in a weight of …

Influence Of Synthesis Conditions On The Physicochemical And Electrocatalytic Properties Of Non-Stoichiometric Ba2sr2la2ti4o12 Perovskites, Ofeliya Kostadinova, Iliyan Popov, Simeon M. Stankov, Hristo Kolev, Tamara Petkov

Karbala International Journal of Modern Science

Present work studies the influence of the pretreatment milling media (deionized water (BLTOS-H) and isopropanol (BLTOS-i)) on the surface characteristics, structure, chemical composition and catalytic activity of non-stoichiometric Ba2Sr2La2Ti4O12 perovskites. The IR spectroscopy and XRD analyses shows a difference in the structure and phase composition of the two materials. X-ray photoelectron spectroscopy detects a Ba2+- and La3+-enriched and Sr2+-depleted surface. The BLTOS-i sample appears to exhibit higher specific surface area (SSA) and pore volume in comparison to BLTOS-H. The electrochemical tests showed that BLTOS-H sample have similar behavior to platinum at current densi-ties up to 10 mA cm-2, while BLTOS-i …

Architecture Of Heptagonal Metallo-Macrocycles Via Embedding Metal Nodes Into Its Rigid Backbone, A.M.Shashika D. Wijerathna, He Zhao, Qiangqiang Dong, Qixia Bai, Zhiyuan Jiang, Jie Yuan, Jun Wang, Mingzhao Chen, Markus Zirnheld, Rockwell T. Li, Yuan Zhang, Yiming Li, Pingshan Wang

College of Sciences Posters

Metal-organic macrocycles have received increasing attention not only due to their versatile applications such as molecular recognition, compounds encapsulation, anti-bacteria and others, but also for their important role in the study of structure-property relationship at nano scale. However, most of the constructions utilize benzene ring as the backbone, which restricts the ligand arm angle in the range of 60, 120 and 180 degrees. Thus, the topologies of most metallo-macrocycles are limited as triangles and hexagons, and explorations of using other backbones with large angles and the construction of metallo-macrocycles with more than six edges are very rare.

In this study, …

Investigation Of Oleic Acid As A Dispersant For Hydroxyapatite Powders For Use In Ceramic Filled Photo-Curable Resins For Stereolithography, Brendan Kennedy, Eamonn De Barra, Stuart Hampshire, Maura Kelleher

Articles

Stereolithography allows production of porous hydroxyapatite scaffolds for bone regeneration but is limited by the challenging rheology of ceramic filled resins. Oleic acid, a natural fatty acid, was applied in concentrations of 0.0–0.3 wt% to improve the rheological properties of HAp resins for the fabrication of solid cylinders and scaffolds by digital light processing (DLP) printing in a wiperless system. Bonding by chemisorption was confirmed by FTIR analysis. The powders were then incorporated into a photo-curable resin of 1–6 hexanediol diacrylate at 18–30 vol%. The shear viscosity and sedimentation rates of photocurable resins containing HAp powder decreased with increasing concentration …

Comparative Static And Dynamic Analyses Of Solvents For Removal Of Asphaltene And Wax Deposits Above- And Below-Surface At An Iranian Carbonate Oil Field, Milad Norouzpour, Amin Azdarpour, Rafael M. Santos, Ali Esfandiarian, Moein Nabipour, Erfan Mohammadian, Abbas K. Manshad, Alireza Keshavarz

Research outputs 2022 to 2026

During production from oil wells, the deposition of asphaltene and wax at surface facilities and porous media is one of the major operational challenges. The crude oil production rate is significantly reduced due to asphaltene deposition inside the reservoir. In addition, the deposition of these solids inside the surface facilities is costly to oil companies. In this study, the efficiency of different solvents in dissolving asphaltene and wax was investigated through static and dynamic tests. The analysis of solid deposits from the surface choke of one of the Iranian carbonate oil fields showed that they consisted of 41.3 wt % …

Ongoing Fragmentation Of The Subducting Cocos Slab, Central America, Tu Xue, Diandian Peng, Kelly H. Liu, Jonathan Obrist-Farner, Marek Locmelis, Stephen S. Gao, Lijun Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Fundamental to plate tectonics is the subduction of cold and mechanically strong oceanic plates. While the subducted plates are conventionally regarded to be impermeable to mantle flow and separate the mantle wedge and the sub slab region, isolated openings have been proposed. by combining new shear wave splitting measurements with results from geodynamic modeling and recent seismic tomography and geochemical observations, we show that the upper ~200 km of the Cocos slab in northern Central America is intensively fractured. the slab there is strong enough to produce typical arc volcanoes and Benioff Zone earthquakes but allows mantle flow to traverse …

Erratum: New Estimates Of The Magnitude Of The Sea-Level Jump During The 8.2 Ka Event, (Geology (2022), 50(1), (86–90), (10.1130/G49296.1)), Jonathan Obrist-Farner, Mark Brenner, Jeffery R. Stone, Marta Wojewódka-Przybył, Thorsten Bauersachs, Andreas Eckert, Marek Locmelis, Jason H. Curtis, Susan R.H. Zimmerman, Alex Correa-Metrio, Lorenz Schwark, Edward Duarte, Antje Schwalb, Etienne Niewerth, Paula Gabriela Echeverría-Galindo, Liseth Pérez

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

No abstract provided.

Synthesis, Densification, And Cation Inversion In High Entropy (Co,Cu,Mg,Ni,Zn)Al2o4 Spinel, Cole A. Corlett, Nina Obradovic, Jeremy Lee Watts, Eric W. Bohannan, William Fahrenholtz

Materials Science and Engineering Faculty Research & Creative Works

The synthesis, densification behavior, and crystallographic site occupancy were investigated for four different spinel-based ceramics, including a high-entropy spinel (Co_0.2Cu_0.2Mg_0.2Ni_0.2 Zn_0.2)Al₂O₄. Each composition was reacted to form a single phase, but analysis of X-ray diffraction patterns revealed differences in cation site occupancy with the high-entropy spinel being nearly fully normal. Densification behavior was investigated and showed that fully dense ceramics could be produced by hot pressing at temperatures as low as 1375°C for all compositions. Vickers' hardness values were at least 10 GPa for all compositions. The …

Methyl Isobutyrate Production Via Hydrogenation Of Methyl Methacrylate Derived From Pyrolysis Of Acrylic Plastic Waste, Ramzi Nasser Ahmed Saif

Chulalongkorn University Theses and Dissertations (Chula ETD)

According to zero waste and upcycling policy, this work aims to utilize waste polymethyl methacrylate (PMMA) to methyl isobutyrate (MIB) via hydrogenation over nickel (Ni) based catalysts supported on commercial zeolites: HY, H-Beta-27 (SiO2/Al2O3 = 27 by mole), H-Beta-40 (SiO2/Al2O3 = 40 by mole) and H-ZSM-5. The appropriate catalyst support was first screen by using MMA monomer as the substrate for hydrogenation. Under 30 bar initial H2 pressure (PH2) at 250 °C for 3 h, Ni/H-Beta-27 catalyst effectively promoted hydrogenation to achieve 85% MMA conversion with 56.2 wt% MIB yield because of its larger external surface area and pore size. …

Comprehensive Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For The Water Management Of Reservoir With Concentrated Divalent Ions, Tao Song, Mohamed Ahdaya, Zhanmiao Zhai, Thomas P. Schuman, Baojun Bai

Chemistry Faculty Research & Creative Works

As one of the most widely used technology to ameliorate the reservoir's heterogeneity, polymer gels have been applied for more than 60 years. However, how to plug fractured reservoirs with significant abnormal features, high temperature and high salinity, especially the divalent cations, is still a challenging target. This work systematically evaluated a novel salt-resistant re-crosslinkable preformed particle gel (SR-RPPG) designed for fractured reservoirs with excellent salt resistance (up to 5 % CaCl₂). We evaluated the swelling kinetics, thermal stability and plugging efficiency of this SR-RPPG. We assessed the swelling kinetic and re-crosslinking behavior of the SR-RPPG through the …

Exploration And Synthesis Of Half-Heusler And Disordered Ternary Intermetallic Single Crystals, Md Fahel Bin Noor

Graduate Theses/Dissertations

Due to their distinct physical and chemical characteristics, half-Heusler compounds are intermetallic materials that have undergone substantial research. The general formula for these compounds is XYZ, where X and Y are transition metals and Z is a p-block element. Thermoelectricity is among the half-Heusler compounds' most exciting potential uses, but additional possible applications include spintronics, magnetic refrigeration, and superconductivity, among others. Recently, half-Heuslers (and Heuslers) have emerged as candidates for catalysts for hydrogenation. The CoNbSn half-Heusler compound, as well as another unique intermetallic ternary compound, the disordered Mn_4-xCr_xAl₁₁, were successfully grown as single crystals …

Thermotrophy Exploratory Study, James Weifu Lee

Chemistry & Biochemistry Faculty Publications

The question of whether environmental heat energy could be utilized as a source of energy for biological metabolism is the center of this exploratory research. In 1979, this author postulated a hypothesis for the existence of thermotrophs that could isothermally utilize environmental heat energy as a source of their energy on Earth. According to this hypothesis, the thermotrophs could be the first primitive forms of life in the early Earth environment. The chemotrophs and phototrophs that we currently are all well familiar with might have been evolved somehow from the primitive thermotrophs. Furthermore, all the organisms currently regarded as the …