Chemistry Commons^™

Fabrication Of SncuX/Cms Composite Materials For Lithium-Ion Batteries, Yu Liu, Jing-Ying Xie, Jun Yang, Ke Wang, Bao-Feng Wang

Journal of Electrochemistry

The composite material were prepared by sub-ctrochemical cycling tests showed that coulombic efficiency of the electrodes prepared by the composite materials was near 100 % after second cycle and the capacity dropped less than 5% after the 30th cycle, versus 390 mAh⋅g^-1 special capacity, improving 26% special capacity of pure CMS electrode. The electrochemical performance of the composite materials is depended strongly on the alloy content in the composite, the addhesive strength between alloy particles and CMS matrix, the distribution of particles on the surface of CMS and the particle size of alloy. The composite material can be applied …

Pure Iron Electrolyzed From Scrap Iron Chips And Its Corrosion Characteristics, Wei-Min Cao, Ren-He Yin, Hui-Ceng Yan, Zhi-Qiang Ye

Journal of Electrochemistry

The high purity electrolytic iron was made from scrap iron chips. Electrolytic conditions of pure iron were determined in chloride baths and the highest purity was 99.983% by chemical analysis. Pure iron had very compact texture and high mechanical strength by SEM figures of cross section. In deaerated 0.5 kmol·m^-3 H₂SO₄ and 0.5 kmol·m^-3 NaCl solutions, the corrosion rate of iron decreased with increasing purity.

Experimental Investigation Of Steel Corrosion In Lead Bismuth Eutectic (Lbe): Characterization, Species Identification, And Chemical Reactions, John Farley, Dale L. Perry, Allen L. Johnson

Transmutation Sciences Materials (TRP)

The goal of the present research is to achieve a basic understanding of corrosion of steels by Lead Bismuth Eutectic (LBE). Liquid LBE is under consideration in the transmuter as both a spallation target and as a blanket coolant. There have been previous studies of LBE, especially by the Russians, who have over 80 reactor-years experience with LBE coolant in their Alpha-class submarine reactors. The Russians found that the presence of small amounts (ppm) of oxygen in the LBE significantly reduced corrosion. However, a fundamental understanding and verification of its role in the corrosion of steels is still very incomplete. …

Development Of A Systems Engineering Model Of The Chemical Separations Process: Quarterly Progress Report 11/16/02- 2/15/03, Yitung Chen, Randy Clarksean, Darrell Pepper

Separations Campaign (TRP)

Two activities are proposed in this Phase I task: the development of a systems engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model is the start of an integrated approach to the analysis of the materials separations associated with the TRP Program. A second portion of the project is to streamline and improve an integral part of the overall systems model, which is the software package AMUSE. AMUSE analyzes the UREX process and other related solvent extraction processes and defines many of the process streams that are integral …

Corrosion Of Steel By Lead Bismuth Eutectic: Quarterly Report November- December 2002 January 2003, John Farley

Transmutation Sciences Materials (TRP)

We continue to get valuable data from sputter depth profiling of steel samples. We meet weekly to discuss progress. We took depth-profiling data on D9 steel that had been exposed to LBE. This the first time we have examined this type of steel. This is important because it will enable us to separate out two effects and determine their effect on corrosion: composition of the steel vs surface preparation.

We started to plan a small experiments using a crucible of heated LBE, with the research program to be conducted at UNLV, on basic aspects of corrosion in this system. The …

Calibration Of Ysz Sensors For The Measurement Of Oxygen Concentration In Liquid Pb-Bi Eutectic, Xiaolong Wu, Ramkumar Sivaraman, Ning Li, Wei Hang, T. W. Darling, Yingtao Jiang, Woosoon Yim, Bingmei Fu

Transmutation Sciences Materials (TRP)

Although liquid lead-bismuth eutectic (LBE) is a good candidate for coolant in the subcritical transmutation blanket, it is known to be corrosive to stainless steel, the material of the carrying tubes and containers. Such longterm corrosion problem can be prevented by producing and maintaining a protective oxide layer on the exposed surface of stainless steel. For this purpose, it is required to accurately control the concentration of oxygen dissolved in LBE. Currently, YSZ (Yttria Stabilized Zirconia) oxygen sensors, based on an existing automotive oxygen sensor, with molten bismuth saturated with oxygen as the reference, have been selected for oxygen-concentration measurement. …

Development Of A Systems Engineering Model Of The Chemical Separations Process, Lijian Sun, Haritha Royyuru, Yitung Chen, Randy Clarksean, Darrell Pepper, George Vandegrift, James Laidler

Separations Campaign (TRP)

Project Overview:

• Two Components

– Refine AMUSE Code

– Develop Systems Engineering Model

• Research Objectives

– Develop a framework and environment for a systems engineering analysis of the chemical separations system for the AAA program.

– Establish a baseline systems engineering model from which modifications and improvements can be made.

– Refine the existing AMUSE program that gives a detailed examination of the UREX process, a critical component of the overall separation scheme.

How To Establish Successful Cooperative Student Learning Centers For Stem Courses, Ronald James Bieniek, Douglas R. Carroll, Cesar Mendoza, Oran Allan Pringle, Ekkehard Sinn, Kai-Tak Wan, Donald C. Wunsch

Physics Faculty Research & Creative Works

Students learn more if they are actively involved in the learning process, particularly in a cooperative manner. Several UMR faculty have operated course-based learning centers (LCs) as part of the campus-wide Learning Enhancement Across Disciplines (LEAD) Program of student learning assistance and enhancement. LCs are designed to assist large numbers of students in a cost- and time-efficient manner that promotes student engagement without requiring undue amounts of faculty time. Course instructors spend time in the open learning environment of the LC, in lieu of office hours, guiding students to master course material and skills in their evolution from novice to …

Deuterium Nmr Studies Of Bulk And Silica-Absorbed Polystyrene, Macduff O. Okuom, Jinhua Yang, Frank D. Blum

Chemistry Faculty Research & Creative Works

Thin polymer films are used in applications such as electronics, biomedical devices and coatings. As the trend to make the devices smaller continues, a film's influence on a material's overall properties becomes more prominent. Previous studies have shown that thin polymer films have characteristics slightly different from those of bulk polymers. Film behavior has been characterized by examining thermal expansion, diffusion, conformation, density and glass transitions. The dynamics of glassy polystyrene has been investigated using a wide variety of theoretical and experimental methods. Schaefer et al., using 13C NMR, reported that ~7% of phenyl rings in polystyrene undergo -flips. Using …

Ft-Ir Studies Of Stereo Regular Pmma On Silica: Drying Effects, Bing Zhang, Suntree Kulkeratiyut, Suriyaphongse Kulkeratiyut, Frank D. Blum

Chemistry Faculty Research & Creative Works

A great amount of work has been done on the configuration of surface adsorbed poly(methyl methacrylate) (PMMA), especially on surfaces to which they have a strong attraction. Some studies have been make on the relationships between configuration and tacticity, molecular weight, adsorbed amount, and density of surface hydroxyl groups. The effect of tacticity on the conformation of alumina-adsorbed PMMA in solution and dry spin-coated films were studied by Grohen et al. Their results showed that surface-adsorbed PMMA chains adopted a relatively flat configuration, but iso-PMMA (isotactic) adsorbed on aluminum, with a much larger fraction of the bound carbonyl groups, had …

Molecular Mass And Dynamics In Pma-D₃ In The Glass Transition Region, Burak Metin, Frank D. Blum

Chemistry Faculty Research & Creative Works

The segmental dynamics through the glass transition region, by which the glassy polymer becomes rubbery, are not well understood. Free volume, thermodynamic and kinetic theories have been used to describe the phenomenon behind the glass transition and some of those theories were tested with computer simulations. Different experimental techniques, such as NMR, thermo-mechanical analysis (TMA), differential scanning calorimetry (DSC), dilatometry and dynamic mechanical analysis (DMA) have all been also used to probe this important phenomena. Deuterium (2H) NMR has been a valuable tool for the investigation of the dynamics of macromolecules. Deuteration of macromolecules at specific locations on the chains …

Dynamics Of Bulk And Adsorbed Poly(Vinyl Acetate), Frank D. Blum, Robert D. O'Connor

Materials Science and Engineering Faculty Research & Creative Works

We have recently completed a series of experiments on methyl-labeled poly(vinyl acetate)-d3, (PVAc-d3)1 and poly(methyl acrylate)-d3 (PMA-d3).234 the systems have been studied as a function of the adsorbed amount, molecular weight, and presence of a protonated overlayer. Using deuterium line shape analysis, we have found that around the glass transition temperature, the adsorbed polymers show the presence of a motional gradient. Polymer segments near the silica-polymer interface have less mobility than the bulk polymer and those near the polymer-air interface are more mobile than those of the bulk polymer. A schematic representation of the motional gradient is shown in Figure …

Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Allen L. Johnson, Dale L. Perry

Transmutation Sciences Materials (TRP)

Materials for transmuter systems must be able to tolerate high neutron fluxes, great temperatures, and chemical corrosion. For lead bismuth eutectic (LBE) systems, there is an additional challenge in that the corrosive behaviors of materials in LBE are not well understood. Most of the available information on LBE systems has come from the Russians, who have over 80 reactor-years experience with LBE coolant in their Alpha-class submarine reactors. The Russians found that the presence of small amounts of oxygen (on the order of parts per million) in the LBE significantly reduced corrosion. However, a fundamental understanding and verification of its …

Surface Studies Of Corrosion Of Stainless Steel By Lead Bismuth Eutectic, Daniel Koury, Brian D. Hosterman, John Farley, Dale L. Perry, D. Parsons, J. Manzerova, Allen L. Johnson

Transmutation Sciences Materials (TRP)

Why is Lead Bismuth Eutectic Important?

• Changing national security stances have led to reexamination of nuclear waste reprocessing

• Dangerous actinides can be separated and

• Transmuted into safer products, creating a waste form dangerous for only hundreds of years, in addition to the production (up to 1/3 of the original fission energy) of useful energy

• Non-moderating coolants or spallation targets for production of fast neutrons is required for transmutation

• Russian experience with LBE coolants in their nuclear submarine fleet makes LBE an attractive possible transmutation coolant technology

• Corrosion of steel by LBE is an important …

Environment-Induced Degradation And Crack-Growth Studies Of Candidate Target Materials, Ajit K. Roy, Brendan O'Toole, Zhiyong Wang, David W. Hatchett

Transmutation Sciences Materials (TRP)

The primary objective of this task is to evaluate the potential for the environmentally-assisted cracking of candidate target materials for applications in spallation-neutron-target systems, such as accelerator-driven system for the transmutation of waste. The materials selected for evaluation and characterization are martensitic stainless steels (SS) including Alloys HT- 9, EP 823 and Type 422 stainless steel.

More recently, this experimental program has been expanded to evaluate the effect of molten lead-bismuth eutectic (LBE) on the corrosion behavior of target materials in the presence of oxygen. Since the materials performance laboratory (MPL) at UNLV currently cannot accommodate this type of testing, …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The corrosion of structural materials is a major concern for the use of lead-bismuth eutectic (LBE) systems for nuclear applications such as in transmuter targets or fast reactors. Corrosion in liquid metal systems can occur through various processes, including, for example, dissolution, formation of inter-metallic compounds at the interface, and penetration of liquid metal along grain boundaries. Predicting the rate of these processes depends on numerous system operational factors: temperature, system geometry, thermal gradients, solid and liquid compositions, and velocity of the liquid metal, to name a few. Corrosion, along with mechanical and/or hydraulic factors, often contributes to component failure. …

Modeling Of Corrosion In Oxygen Controlled Lead Bismuth Eutectic Systems With The Coupling Of Chemical Kinetics And Hydrodynamics, Samir Moujaes, Yitung Chen, Kanthi Kiran Dasika, Chao Wu

Transmutation Sciences Materials (TRP)

Objectives:

• To simulate a 2-D model of the Materials Test Loop by approximating it to be a toroid with a pie cross section for the purpose of comparing the simulated results with the analytical results.
• The temperature and concentration profiles on the wall boundaries imposed are similar to the actual test model.
• Geometry effects have great influence on local corrosion rate.
• A 2-D benchmark problem and a sudden expansion case are studied which show good consistency to analytical solution.
• Results from 2-D sudden expansion problem are similar to experimental data obtained by other researchers.

Nuclear Criticality, Shielding, And Thermal Analyses Of Separations Processes For The Transmutation Fuel Cycle, William Culbreth, Denis Beller

Separations Campaign (TRP)

The first step in any transmutation strategy is the separation of radionuclides in used nuclear fuel. The current separation strategy supporting the Advanced Fuel Cycle Initiative (AFCI) program is based on the use of a solvent extraction separation process to separate the actinides, fission products, and uranium from used commercial nuclear fuel, and on the use of pyrochemical separation technologies to process used transmuter fuels. To separate the fission products and transuranic elements from the uranium in used fuel, the national program is developing a new solvent extraction process, the Uranium Extraction Plus, or UREX+, process, based on the traditional …

Investigation Of The Corrosion Of Steel By Lead-Bismuth Eutectic (Lbe) Using Scanning Electron Microscopy And X-Ray Photoelectron Spectroscopy, Daniel Koury

UNLV Theses, Dissertations, Professional Papers, and Capstones

Lead Bismuth Eutectic (LBE) has been proposed for use in programs for accelerator transmutation of waste. LBE is the leading candidate material as a spallation target and an option for the sub-critical blanket coolant. The corrosion of 316 and 316L stainless steels by LBE has been studied using UNLV's facilities for Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS). We have compared exposed and unexposed samples and studied the differences. Some amount of surface contamination is present on the samples and has been removed by ionbeam etching. The unexposed samples reveal typical stainless steel characteristics: a chromium oxide passivation …

Mechanistic Study Of Oxidation Of Hypophosphite On Pt Electrodes By Sniftirs, Tai-Xiang Jiang, Hui-Huang Wu

Journal of Electrochemistry

The oxidation of hypophosphite on a polycrystalline platinum electrode was studied by SNIFTIRS and cyclic voltammetry, the in-situ IR spectra were analyzed as a function of Pt electrode potentials in the solution of 0.5 mol/L H₂SO₄+0.1 mol/L NaH₂PO₂. It was found that the dissociative adsorption of hypophosphite ions occurs on Pt surface, and the oxidation product is H₃PO₄, rather than H₂PO₃^- which was considered to produce on Ni electrodes, thereby a new insight into mechanism of hypophosphite oxidation on Pt in acidic media was …

Preparation And Electrochemical Lithium Intercalation Performance Of Different Shaped Carbon Nanotube, Mao-Hui Chen, Zhen-Cai Huang, Guo-Tao Wu, Jin-Kua You, Zu-Geng Lin

Journal of Electrochemistry

In the present work, different shaped carbon nanotubes were produced by the general CVD and the template method at different temperature (600 ℃,700 ℃) with the reaction gas of acetylene. The morphology, structure and the electrochemical lithium intercalation performance were comparatively studied and characterized by TEM, HRTEM, SEM, XRD, Raman techniques and Charge/Discharge Test. It was found that the different preparation methods and temperatures all had an obvious effect on these properties of carbon nanotubes. In our samples, with the increase of preparation temperature, the degree of crystallinity decreased, and the reversible specific capacity increased respectively.

Nano-Sized Cobalt-Based Oxides As Negative Electrode For Lithium-Ion Batteries, Feng Huang, Zheng-Yong Yuan, Yun-Hong Zhou, Ju-Tang Sun

Journal of Electrochemistry

Nanosized cobalt-based oxide (Co₃O₄, CoB_1.36O_2.8 and CoB_0.5Al_0.1O_1.5) samples were prepared by rheological phase method and were tested as anodes in secondary lithium batteries. The cells were cycled between 0.01V and 3.00 V. The best electrochemical performance was obtained from the Co₃O₄ cell, which retained 95% of its initial capacity (931 mAh/g) after 30 cycles. The doping of B, Al reduced the reversible capacity during the first discharge/charge cycle, and the quantity of reversible capacity reduced with B, Al increasing. The modifying structures at difference …

Lithium Intercalation Performance Of P-Doped Phenolic Resin Pyrolysis Carbon, Bao-Hua Li, Kai-Xi Li, Yonggen Lv, Chun-Xiang Lv, Dong Wu, Li-Cheng Ling

Journal of Electrochemistry

Phosphorus-doped phenolic resin carbon was prepared by low temperature (700 ℃) pyrolysis of thermoplastic phenolic resin containing different amounts of phosphorus pentoxide after curing. X-ray diffraction pattern and the constang-current charge-discharge properties of phenolic resin carbon were studied. The results showed that the phenolic resin carbon microstructure became out of order with increasing of content phosphorus pentoxide, otherwise, the first discharge reversible capacities increased firstly and then decreased. The first discharge reversible capacity of phenolic resin carbon containing 9wt% phosphorus pentoxide was 528 mA·h·g^-1 which was higher than that of non-phosphorus doped phenolic resin carbon(230 mA·h·g^-1) did.

Electrochemical Preparation And Reaction Mechanism Of Nanocrystalline Nio, Jia-Shan Gu, Ai-Jie Han, Xing-Fu Zhou, Dao-Bao Chu, Chang-Jian Lin

Journal of Electrochemistry

Metallic nickel was electrochemically dissolved in absolute ethanol and acetylacetone mixed solutions and in the presence of Bu₄NBr (as an electron-conductive additive). The electrolyte solution containing the precursor was then directly hydrolyzed to obtain nanocrystalline NiO. The precursor was characterized by FTIR, HNMR, Raman spectra and the nano-powder was characterized by XRD and TEM. The results showed that the NiO powder after calcined at 450 ℃ had formed the cubic NaCl structure and the nanocrystalline NiO prepared by this method had narrow size distribution of 10～15 nm. Moreover, the product yield could be improved by controlling temperature below …

Studies On The Inhibition Of Yki-05 Corrosion Inhibitor To 907a Steel In Different Immersed Environments, Hui Yu, Jian-Hua Wu, Hong-Ren Wang, Jian-Hua Qian, Guang-Zhang Chen

Journal of Electrochemistry

The inhibition of YKI-05 Corrosion inhibitor in different conditions was studied using potentiodynamic polarization technique. The resuled shown that (i) the inhibitor film layer was formed stably on the surface of 907A steel electrode when it was persistently immersed in static seawater and the inhibition efficiency reached 90% or so. The inhibition mechanism is negative catalytic effect. (ii) the inhibitior film layer was not stable when the electrode was periodically immersed in seawater and was destroyed more significantly with the increase of electrode exposing time. The film was only a covered layer on the surface of electrode and it retarded …

Steady State Simulation Of Ysz Intermediate-Temperature Fuel Cell, Zi-Jing Lin, Ye Gu, Xiao-Hua Zhang

Journal of Electrochemistry

With a coupled 2D electrochemical and thermal modeling software, the characteristics of the steady state operation of the intermediate-temperature fuel cell with thin yttria-stabilized zirconia(YSZ) electrolyte was analyzed. The parameters of I-V equation were obtained from fitting the experiment results and the choice of grid points was determined by balancing the accuracy requirement and computational efficiency. The temperature fields at different operation circumstances such as flow designs, material choices for interconnect, were examined. The dependences of the output power and cell efficiency on the operating voltage at different temperatures were studied. Based upon the analysis of the temperature profile, it …

Preparation And Performance Of Lifeo2 Coated Nickel Oxide Cathode For Molten Carbonate Fuel Cells, Chun-Ming Wang, Fei Li, Ke-Ao Hu

Journal of Electrochemistry

A novel cathode for molten carbonate fuel cells was prepared by coating LiFeO₂ over the surface of porous NiO cathode by a simple combustion process. The analytical results of X-ray diffraction (XRD), energy dispersive analysis of X-ray (EDAX), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) indicated that the LiFeO₂ coating on the surface of NiO particles consisted of nonometer-sized LiFeO₂ grains and sintered tightly with the NiO particles. The LiFeO₂ coating dramatically reduced the contacting area of NiO with the carbonate melts, thus the solubility of NiO in the carbonate melts was decreased. Meanwhile, …

Review Of Mathematical Model For Proton Exchange Membrane Fuel Cell, Shan-Hai Ge, Bao-Lian Yi, Hua-Min Zhang

Journal of Electrochemistry

In the review with 49 references, the mathematical models for proton exchange membrane fuel cell (PEMFC) were summarized. The mechanistic model and empirical model were introduced. Transfer in the membrane, catalyst layer, diffusion layer and flow field of PEMFC were described. The importance of water and heat management was analyzed. The dimension, complexity and solving methods of the PEMFC model were discussed. The importance and validity to develop a model with time dimension are put forward.

Detection And Analysis Of Sec1 Immunological Reaction By Afm And Electrochemical Method, Sa-Ying Dong, Hong-Ren Wang

Journal of Electrochemistry

The goals of this work were to demonstrate the ability of atomic force microscopy (AFM) to detect various immunological processes between antibodies and antigens.A sensor was designed by covalently linking the antibody of staphylococcal enterotoxin Cl (SEC1) on the self-assembled gold surface. This sensor permitted detection of antibody-antigen recognition events which were highly correlated with the topography under different conditions. The statistic data of AFM were analysed. As control experiments, nonspecific antigens and lower concentration SEC1 antigens were directly observed. In addition, an acidic solution was used to break the antigen-antibody pair and made the sensor reuse. Electrochemical evidence was …

Properties Of Domestic Natural Graphite Used For Li-Ion Batteries, Cui-Wei Du, Yu-Juan Zhao, Gang Zhang, Yin-Shun Wu, Qing-Guo Liu

Journal of Electrochemistry

The structure, physical characteristics and electrochemical properties of the natural graphite produced in Shandong province have been studied. The result of X-ray diffraction showed that the graphite consisted of hexagonal structure and rhombic structure (30% rhombic structure). It was fine crystal graphite. Used as a negative material of Lithium ion battery, the natural graphite showed excellent voltage and high energy capacity, but poor compatibility with electrolyte solution containing propylene carbonate (PC) for its own structure limitation.