Chemistry Commons^™

Preliminary Study On Morphology Controllability Of Electrochemically Prepared Polyaniline By Using Aniline Aimer, Yang Zuo, Kang Shi

Journal of Electrochemistry

Employing of aniline dimer (N-phenyl-p-phenylenediamine, NPD) as the starting monomer, polyaniline was electrochemically synthesized on the surface of glassy carbon electrode in acetonitrile-aqueous mixing solutions（20% by volume）containing 1 mol·L^-1 HClO₄. Experimental results demonstrated that the polymerization of NPD occurs at the potentials about 0.2 V lower than those of aniline monomer. Furthermore, the resulting polyaniline has higher morphology controllability than those synthesized by using aniline as the stating monomer. The uniform polyaniline nanoparticles (30 nm in diameter), ultralong nanowires (length > 5 μm, 50 nm in diameter) or large area nanosheets (4 μm in length, 2 μm in …

Electrochemical Oxidation Of Ammonium Nitrite In Absorption Solution Of Flue Gas, Yong-Hong Lu, Xiao-Bo Dong, Li-Sha Wang, Yan Liu, Chen-Jian Zhu, Hai-Bo Xu

Journal of Electrochemistry

In order to make full uses of ammonium nitrite in absorption solution from flue gas simultaneous desulfurization, denitrification and demercurization processes, here the electrochemical oxidation method was used to transform ammonium nitrite into ammonium nitrate. By using polarization curve, cyclic voltammogram and galvanostatic methods, suitable electrode materials were evaluated and chosen. The influence of electrolyte composition was discussed and the appropriate process parameters were obtained. Finally, the effect of electrochemical oxidation was confirmed by chemical analysis method. In 0.05 mol·L^-1 NaNO₂ + 0.05 mol·L^-1 (NH₄)₂SO₄ simulated absorption solution (5 L, pH = …

Preparation Of High Performance Porous Silicon Powders By Etching Al-Si Alloy In Acid Solution For Lithium Ion Battery, Shi-Ji Hao, Chun-Li Li, Kai Zhu, Ping Zhang, Zhi-Yu Jiang

Journal of Electrochemistry

Porous silicon powders prepared by etching Al-Si alloy using an acid solution was reported in the first time. The morphology and structure of as-obtained material were investigated using scanning electron microscopy (SEM) and X-ray diffraction (XRD) method. It was found that the spongy porous silicon powders presented well crystalline structure and consisted of nano-Si particles. The particle size of porous Si powders was about 20 μm, and the specific surface area was 102.7 m²·g^-1. The electrochemical properties of porous silicon powders were evaluated as an anode material for lithium ion batteries. The material proportion in the …

Pulse Electrodeposition Of Pd-Ni Alloy Nanoparticles For Electrocatalytic Oxidation Of Formic Acid, Fang-Zu Yang, Jun-Pei Yue, Zhong-Qun Tian, Shao-Min Zhou

Journal of Electrochemistry

The Pd-Ni alloy nanoparticles with nickel atomic contents of 12.0%, 16.4% and 22.6% were successfully electrodeposited from a Pd-Ni alloy electrolyte by square wave pulse plating. The alloy nanoparticles were in the spherical shape with a diameter of 50 ~ 80 nm. As the growth potential of the alloy was negatively shifted, the nickel content of the alloy was increased, and the size of the nanoparticles was almost the same, whereas the number, the degree of crosslinking and the real active area of the nanoparticles were increased. As the nickel content of the alloy nanoparticles increased, the peak current for …

Underpotential Deposition Of Germanium On Au(111) And Pt(111) Surfaces In Ionic Liquids, Xu-Fen Xie, Jia-Wei Yan, Jing-Hong Liang, Ji-Jun Li, Meng Zhang, Bing-Wei Mao

Journal of Electrochemistry

The underpotential deposition (UPD) of germanium (Ge) in BMIPF₆ ionic liquids on Au(111) and Pt(111) surfaces have been investigated by cyclic voltammetry (CV) and in-situ scannin tunneling microscopy (STM). The CV results show that there are two reduction peaks related to the electrodeposition of Ge. The first reduction peak appeared in the CV curve may cover the transformation of Ge⁴⁺ to Ge²⁺ and the UPD of Ge. The second reduction peak corresponds to the bulk deposition of Ge. In-situ STM study suggests that the two UPD layers of Ge are formed on Au(111) and Pt(111) surfaces. The …

Synthesis And Electrochemical Properties Of Lico1-XMgXMno4 And Lico1-XAlXMno4 (X= 0, 0.02, 0.05, 0.1) As Positive Materials For Lithium-Ion Batteries, Mei-Ling You, Qing-Song Tong, Xiu-Hua Li, Min Lin, Xing-Kang Huang, Yong Yang

Journal of Electrochemistry

The Al-doped and Mg-doped LiCoMnO₄ materials were synthesized through solid-state reaction. The effects of doping amounts of Mg and Al on the initial capacities, discharge plateaus, and cycle performances were investigated. The morphologies and structures of the as-prepared materials were studied by scanning electron microscopy and powder X-ray diffraction. The results indicate that the as-prepared samples were composed of uniform, well-crystallized particles. The pristine LiCoMnO₄ possessed an initial capacity of 87.0 mAh·g^-1, while LiCo_0.98Mg_0.02MnO₄ and LiCo_0.98Al_0.02MnO₄ delivered 91.3 and 93.6 mAh·g^-1, respectively. The proper …

Passivation Behavior Of Aluminum Alloy During Electrochemical Machining And Its Effects On The Machining Performance, Li-Min Jiang, Wen-Bo Deng, Jun-Long Ying

Journal of Electrochemistry

The passivation behavior of aluminum alloy during electrochemical machining was investigated and discussed. The effects of processing voltage, current density, space of electrodes and electrolyte composition on electrochemical machining performance were explored. The results indicate that the electrochemical machining aluminum alloy in the composite electrolyte system containing NaNO₃ and NaF existed passivation phenomenon. Passivation action decreaseed the current efficiency and made it varied greatly with the current density. Also the passivation shifted the interspace characteristic curve of electrode notably to a negative direction. There was not passivation phenomenon in the composite electrolyte system containing the same concentrations of NaCl …

Fabrication And Impedance Performance Of Gradient Lani0.6Fe0.4O3-δ-Gd0.2Ce0.8O2 Composite Cathodes For Intermediate Temperature Solid Oxide Fuel Cell, Yang Li, Bo Huang, Meng Yuan, Zhi-Qiu Zhang, Zong-Yao Liu, Xu-Chen Tang, Xin-Jian Zhu

Journal of Electrochemistry

A LNF-GDC composite cathode with a gradual change in the composition between ScSZ electrolyte and LNF cathode was fabricated to reduce the cathode polarization resistance (R_p). The gradual change in composition between ScSZ electrolyte and LNF cathode shows the decreases in the charge transfer resistance (R_ct) and gas phase diffusion resistance (R_d). The results revealed that the Rp value, measuring 0.452 Ω·cm² at 750 °C, was the lowest for LNF-GDC composite cathodes with three layers and gradient changes in composition between ScSZ and LNF (Cathode C),, whereas the Rp value of 70%LNF-30%GDC composite …

Surface Structure And Electrochemical Performance Of Zno Coated Lini1/3Co1/3Mn1/3O2, Chang-Wei Liu, Yu Wang, Yu-Zhong Guo, Lu-Lu Dan, Jian-Hua Wang

Journal of Electrochemistry

The surface of LiNi_1/3Co_1/3Mn_1/3O₂ particles were modified by ZnO. Surface structure and electrochemical properties of the coated materials were investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and electrochemical tests. The results show that a ZnO coating affects the surface composition of LiNi_1/3Co_1/3Mn_1/3O₂ particles. The surface contents of nickel and manganese increase with the amount of ZnO coating. ZnO can react with LiNi_1/3Co_1/3Mn_1/3O₂ and a complex oxide is formed during the heat-treatment at above 400 ^oC. The …

Study On Carbon Supported Pd Catalysts Modified By Phosphomolybdic Acid For H2O2 Electrocatalytic Reduction, Li-Mei Sun, Cheng Zhang, Ying-Rong Bao, Hong-Xia Li

Journal of Electrochemistry

The Pd/C catalyst was prepared with the chemical reduction method, and phosphomolybdic acid (PMA) was modified on the Pd/C catalyst using the dipping method. The compositions and structures of the Pd/C and Pd/C modified by phosphomolybdic acid (PMA-Pd/C) catalysts were characterized with X-ray diffraction and Fourier Transform infrared spectroscopy analyses. The electrocatalytic activity and stability of the catalysts for the reduction of hydrogen peroxide (H₂O₂) were studied using cyclic voltammetry and chronoamperometry. The results showed that the phosphomolybdic acid was tightly fixed on the surface of Pd/C catalyst through the chemical interaction. The eletrocatalytic activity of …

Preparation Of Pd/Tio2/C Catalyst And Its Electrocatalytic Performance In Basic Solution For Ethanol Oxidation, Qiao-Xia Li, Yi-Chao Yang, Ming-Shuang Liu, Hong-Min Mao, Qun-Jie Xu

Journal of Electrochemistry

Nanoparticles TiO₂ were prepared by hydrothermal method using precursor tetrabutyl titanate. The Pd/TiO₂/C catalyst was synthesized by liquid phase reducing method supported on nano TiO₂ and Vulcan carbon XC-72. The Pd/TiO₂/C catalyst was characterized by XRD, TEM, cyclic voltammetry, and chronopotentiometry. XRD confirmed the face-centered cubic structure of Pd particles, and TEM indicated that Pd particles (size 3 ~ 4 nm) dispersed uniformly on TiO₂ and carbon XC-72. The results from cyclic voltammogram and chronopotentiogram showed the higher ethanol oxidation activity and stability of Pd/TiO₂/C catalyst (20% Pd) as compared with …

Design And Development Of A Novel Glucose Biosensor Based On The Ferrocene-Functionalized Fe3O4 Nanoparticles/Carbon Nanotubes/Chitosan Nanocomposite Film Modified Electrode, Hua-Ping Peng, Dai-Jun Zha, Wei Chen, Ai-Lin Liu, Xin-Hua Lin

Journal of Electrochemistry

A novel platform for the fabrication of glucose biosensor was successfully constructed by entrapping glucose oxidase (GOD) in a ferrocene monocarboxylic acid-aminated Fe₃O₄ magnetic nanoparticles conjugate (FMC-AFNPs)/chitosan (CS)/multiwall carbon nanotubes (MWNTs) nanocomposite. The formation of FMC-AFNPs could effectively prevent the leakage of ferrocene and retain its electrochemical activity. This GOD/FMC-AFNPs/CS/MWNTs matrix provided a biocompatible microenvironment for retaining the native activity of the immobilized GOD. Moreover, the presence of MWNTs enhanced the charge-transport properties of the composite and facilitated electron transfer between the GOD and the electrode for the electrocatalysis of glucose. Under the optimal conditions the designed …

A New Nonenzymatic Glucose Sensor Based On The Cuo Nanoplatelets, Yan-Cai Li, Fu-Ying Huang, Shun-Xing Li, Jie Chen, Shu-Qing Feng, Fei Wang

Journal of Electrochemistry

The CuO nanoplatelets were synthesized by hydrothermal method. The structure and morphology of the CuO nanoplatelets were characterized by TEM and XRD. A new nonenzymatic glucose sensor was constructed by immobilizing the CuO nanoplatelets on glassy carbon electrode with Nafion. The electrochemical performance of the CuO/Nafion/GCE for the detection of glucose was investigated by cyclic voltammetry and current-time curve. The experiment results showed that the linear dependence of the sensor was 0.01 to 0.3 mmol·L^-1 for glucose with a sensitivity of 1783.58 μA·mmol^-1·L·cm^-2, and the detection limit of the sensor was 0.80 μmol·L^-1 (S/N …

Property Enhancements Of Dielectric Nanoparticles Via Surface Functionalization, Andrew Byro

Dissertations, Theses, and Capstone Projects

This thesis describes the surface modification of barium strontium titanate nanoparticles for use in polymer/ceramic composite thin film capacitors with resultant improved dielectric and film-making properties. Phosphonic acid-type ligands proved to be most effective for surface conjugation to the surface of the barium strontium titanate nanoparticles. Amine-terminated ligands proved to be effective at removing surface adsorbed water before being almost entirely removed during the sample washing stage. Carboxylic acid terminated ligands proved to adhere less well to the nanoparticle than the phosphonic acid, but resulted in thin films with a higher dielectric constant, which was more stable in the measured …

Fabrication And Assembly Of Patchy Particles With Uniform Patches, Zhenping He

Dissertations, Theses, and Capstone Projects

Patchy colloidal particles have been widely studied as the self-assembly building blocks to illustrate their potential for forming complex structures. The parameters affecting the final assembly structures include (i) patch size, shape, and number per particle, (ii) their relative positions, and (iii) the surface properties of the patch material. Recent computational studies have highlighted the impact of patch shape on assembly structure; however, there are only a limited number of methods that can provide control over patch shape and size. In this thesis, a template is introduced to the Glancing Angle Vapor Deposition method (GLAD) to create surface anisotropy on …

Organic Pi-Stacking Semiconducting Material: Design, Synthesis And The Analysis Of Structure And Properties, Bin Wang

Dissertations, Theses, and Capstone Projects

Organic semiconducting materials have been under intensive investigation in the recent decades for potential applications in various electronic or optoelectronic devices such as light emitting diodes, photovoltaic cells and field effect transistors. Compared to inorganic counterparts, organic charge transport materials are attractive for their abilities of forming thin-films, large area manufacturing, compatibility with flexible substrate, light weight and potential low fabrication cost. The charge transport property of the organic active layer is one of the key factors to the electronic or optoelectronic performance of devices. Research projects presented in this thesis focused on improving charge carrier mobility of organic charge …

Large-Scale Solution Synthesis Of Narrow Graphene Nanoribbons, Timothy H. Vo, Mikhail Shekhirev, Donna A. Kunkel, Martha D. Morton, Eric Berglund, Lingmei Kong, Peter M. Wilson, Peter A. Dowben, Axel Enders, Alexander Sinitskii

Nebraska Center for Materials and Nanoscience: Faculty Publications

According to theoretical studies, narrow graphene nanoribbons with atomically precise armchair edges and widths of(1.1 eV), which makes them potentially promising for logic applications. Different top–down fabrication approaches typically yield ribbons with width >10nm and have limited control over their edge structure. Here we demonstrate a novel bottom–up approach that yields gram quantities of high-aspect-ratio graphene nanoribbons, which are only ~1 nm wide and have atomically smooth armchair edges. These ribbons are shown to have a large electronic bandgap of ~1.3 eV, which is significantly higher than any value reported so far in experimental studies of graphene nanoribbons prepared by …

Combining Monte Carlo Transport And Level Set Surface Evolution For Modeling Vapor Phase Deposition Of Thin Films Over Sub-Micron Features, John Lewis Smith

Graduate Theses - Chemical Engineering

A hybrid scheme is used to model the vapor phase deposition of thin films at the feature scale. The transport of the chemical species to the substrate surface is modeled with a Collisionless Direct Simulation Monte Carlo (DSMC) method. The Level Set Method is used to model the growth of the thin-film on the substrate. The convergence criteria for these methods were not found in literature.

The governing equations for the Level Set Method are, in general, non-linear partial differential equations. The coupling of the DSMC Method with the Level Set Method results in a set of non-Gaussian stochastic non-linear …

Degradation Of High Voltage Glass Fiber-Reinforced Polymer Matrix Composites By Aggressive Environmental Conditions, Tianyi Lu

Electronic Theses and Dissertations

Polymer matrix composites reinforced with either E glass or ECR glass fibers-reinforced are used in a variety of high voltage electrical applications because of their advantages like lower weight and cost. However, they can be damaged by aggressive in-service conditions such as high temperature, ultraviolet radiation, moisture, ozone and corrosive environments. Different degradation mechanisms can develop in high voltage PMCs under those extreme environments, which, in turn, can affect the long term structural durability of the composites. A set of PMCs reinforced with ECR-glass and E-glass fibers embedded in four different resins has been investigated in this study. In addition, …

Analysis Of A Chemical Model System Leading To Chiral Symmetry Breaking: Implications For The Evolution Of Homochirality, Brandy N. Morneau, Jaclyn M. Kubala, Carl Barratt, Pauline Schwartz

Chemistry and Chemical Engineering Faculty Publications

Explaining the evolution of a predominantly homochiral environment on the early Earth remains an outstanding challenge in chemistry. We explore here the mathematical features of a simple chemical model system that simulates chiral symmetry breaking and amplification towards homochirality. The model simulates the reaction of a prochiral molecule to yield enantiomers via interaction with an achiral surface. Kinetically, the reactions and rate constants are chosen so as to treat the two enantiomeric forms symmetrically. The system, however, incorporates a mechanism whereby a random event might trigger chiral symmetry breaking and the formation of a dominant enantiomer; the non-linear dynamics of …

Precursors And Processes For The Growth Of Metallic First Row Transition Metal Films By Atomic Layer Deposition, Lakmal Charidu Kalutarage

Wayne State University Dissertations

As a result of the continuous miniaturization of microelectronics devices, atomic layer deposition (ALD) has gained much attention in the recent years. ALD allows the deposition of ultra-thin conformal films with accurate thickness control due to the self-limiting growth mechanism. The microelectronics industry requires the growth of metallic first row transition metal films by ALD. Due to the positive electrochemical potentials, the ALD growth of noble metal thin films has been well developed in the past. By contrast, the ALD growth of first row transition metal films remains poorly documented. The reasons for this scarcity include the lack of suitable …

Design, Synthesis And Applications Of Fluorescent And Electrochemical Probes, Giri K. Vegesna

Dissertations, Master's Theses and Master's Reports - Open

“Seeing is believing” the proverb well suits for fluorescent imaging probes. Since we can selectively and sensitively visualize small biomolecules, organelles such as lysosomes, neutral molecules, metal ions, anions through cellular imaging, fluorescent probes can help shed light on the physiological and pathophysiological path ways. Since these biomolecules are produced in low concentrations in the biochemical pathways, general analytical techniques either fail to detect or are not sensitive enough to differentiate the relative concentrations. During my Ph.D. study, I exploited synthetic organic techniques to design and synthesize fluorescent probes with desirable properties such as high water solubility, high sensitivity and …

A Review Of The Hyporheic Zone, Stream Restoration, And Means To Enhance Denitrification, Leanne Merill, David J. Tonjes

Technology & Society Faculty Publications

The hyporheic zone is the subsurface area below and adjacent to a stream where groundwater mixes with stream water, through vertical, lateral, and longitudinal flows. The hyporheic zone connects the stream to uplands and other terrestrial environments. It is a zone of distinct faunal communities, high biological diversity and ecological complexity, and is the site of chemical processing and transformations of ground- and stream waters. The hyporheic zone is important to the overall ecosystem ecology of the stream, and it can influence stream water chemistry. Flows, reactions, and biota in the hyporheic zone are heterogeneous and patchy, making it difficult …

Design And Study Of The Efflux Function Of The Egfp Fused Mexab-Oprm Membrane Transporter In Pseudomonas Aeruginosa Using Spectroscopy, Feng Ding, Kerry J. Lee, Ardeschir Vahedi-Faridi, Hiroshi Yoneyama, Christopher J. Osgood, Xiao-Hong Nancy Xu

Biological Sciences Faculty Publications

Multidrug membrane transporters (efflux pumps) can selectively extrude a variety of structurally and functionally diverse substrates (e.g., chemotoxics, antibiotics), leading to multidrug resistance (MDR) and ineffective treatment of a wide variety of diseases. In this study, we have designed and constructed a fusion gene (egfp-mexB) of N-terminal mexB with C-terminal egfp, inserted it into a plasmid vector (pMMB67EH), and successfully expressed it in the Δ MexB (MexB deletion) strain of Pseudomonas aeruginosato create a new strain that expresses MexA-(EGFP-MexB)-OprM. We characterized the fusion gene using gel electrophoresis and DNA sequencing, and determined its expression in live …

First-Principles Study Of The Electric Field Effect On The Water-Adsorbed Rutile Titanium Dioxide Surface, Abraham L. Hmiel

Legacy Theses & Dissertations (2009 - 2024)

TiO₂ is a semiconducting material that has been used extensively in many industrial applications, and recently has become a candidate for photocatalytic water splitting, fuel cell anode support materials, sensors, and other novel nanodevices. The interface of TiO2 with water, historically well-studied but still poorly understood, presents a ubiquitous environmental challenge towards the ultimate practical usefulness of these technologies. Ground-state density functional theory (DFT) calculations studying the characteristics of molecular adsorption on model surfaces have been studied for decades, showing constant improvement in the description of the energetics and electronic structure at interfaces. These simulations are invaluable in the …

Basic Mosfet Fabrication, Daniel A. Ivy

Natural Sciences Student Research Presentations

The MOSFET, or metal-oxide-semiconductor field-effect transistor, are the sole entities responsible for processing in microchips of everyday electronics, yet they have become extremely small. How can one manufacture such a small, powerful product? By using the simple process of pushing ions away with a nearby electric charge, a switch can be compressed down to unimaginable sizes.

Art Or Science?, Allison Marsh

Section 3: Imaging the Fast Moving

No abstract provided.

Quantification Of Factors Governing Drug Release Kinetics From Nanoparticles: A Combined Experimental And Mechanistic Modeling Approach, Kyle Daniel Fugit

Theses and Dissertations--Pharmacy

Advancements in nanoparticle drug delivery of anticancer agents require mathematical models capable of predicting in vivo formulation performance from in vitro characterization studies. Such models must identify and incorporate the physicochemical properties of the therapeutic agent and nanoparticle driving in vivo drug release. This work identifies these factors for two nanoparticle formulations of anticancer agents using an approach which develops mechanistic mathematical models in conjunction with experimental studies.

A non-sink ultrafiltration method was developed to monitor liposomal release kinetics of the anticancer agent topotecan. Mathematical modeling allowed simultaneous determination of drug permeability and interfacial binding to the bilayer from release …

Gold-Magnetite Nanoparticle-Biomolecule Conjugates: Synthesis, Properties And Toxicity Studies, Akshay Pariti

Masters Theses

"This thesis study focuses on synthesizing and characterizing gold-magnetite optically active magnetic nanoparticle and its conjugation with biomolecules for biomedical applications, especially magnetic fluid hyperthermia treatment for cancerous tissue. Gold nanoparticles have already displayed their potential in the biomedical field. They exhibit excellent optical properties and possess strong surface chemistry which renders them suitable for various biomolecule attachments. Studies have showed gold nanoparticles to be a perfect biocompatible vector. However, clinical trials for gold mediated drug delivery and treatment studied in rat models identified some problems. Of these problems, the low retention time in bloodstream and inability to maneuver externally …

Enhancing The Insulation Of Wide-Range Spectrum In The Pva/N Thin Film By Doping Zno Nanowires, Yu-Chen Lin, Ching-Hsiang Vhen, Liang-Yih Chen, Shih-Chieh Hsu, Shizhi Qian

Mechanical & Aerospace Engineering Faculty Publications

In this study, polyvinyl alcohol/nitrogen (PVA/N) hybrid thin films doped with sharp-sword ZnO nanowires with insulating effect and wide-range spectrum are demonstrated for the first time. PVA/N doped ZnO nanocomposites were developed by blending PVA and N-doped ZnO nanowires in water at room temperature. Measurements from the field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), Raman, and photoluminescence emission (PL) spectra of the products show that nitrogen is successfully doped into the ZnO wurtzite crystal lattice. In addition, the refractive index of PVA/N doped ZnO hybrid thin films can be controlled by varying the doped ZnO nanowires under different …