Chemistry Commons^™

Unambiguous Evaluation Of The Relative Photolysis Rates Of Nitro Indolinyl Protecting Groups Critical For Brain Network Studies, Richard L. Comitz, Yannick P. Ouedraogo, Nasri Nesnas

Chemistry and Chemical Engineering Faculty Publications

Nitrated indolinyl photoprotecting groups are crucial tools extensively used in the study of neuronal signal transduction. Mononitrated photolabile protecting groups have been used effectively, however, recent advances in the introduction of a second nitro group have shown improvement in the photo efficiency of neurotransmitter (agonist) release, albeit, to varying extents, depending on the assessment methods employed. An unambiguous method is discussed based on Nuclear Magnetic Resonance (NMR), which is shown to be an effective technique in the relative overall rate comparison amongst varying nitrated protecting groups. Mononitrated and dinitrated photolabile protecting groups such as CDNIGlu and MNI-Glu are used as …

Electrochemical Monitoring Of Cell Wall-Regulated Transient Extracellular Oxidative Burst From Single Plant Cells, Jun-Tao Liu, Yan-Ling Liu, Zhi Cheng, Shi-Jing Chen, Wei-Hua Huang

Journal of Electrochemistry

Oxidative burst by rapid, transient generation of reactive oxygen species (ROS) is a fundamental process for plant disease defense and signal transduction. ROS can be protective or toxic depending on their concentrations, and critical balance between ROS production and scavenging is regulated by complex and perfect mechanisms in plant cells. However, the process of rapid and transient ROS burst from plant cells and their regulatory mechanisms are far from being completely understood, owing to the methodological obstacles in real-time monitoring such a fast process. In this work, we showed the application of microelectrode electrochemistry with high spatiotemporal resolution to monitor …

A Novel Nitrite Sensing Electrode Based On Au/Fe3O4/Chitosan Nanocomposite, Ying Dong, Yong Wang, Huan-Huan Xing, Jian-Ying Qu

Journal of Electrochemistry

A novel nitrite sensing electrode based on gold nanoparticles and iron oxides (Fe₃O₄) magnetic nanoparticles was fabricated with chitosan as the protective film on glassy carbon matrix. Experiment results showed that the sensing electrode exhibited good electrocatalytic activity toward oxidation of nitrite, and the oxidation peak current increased linearly with the concentration of nitrite varying from 5.0×10^-6 to 2.0×10^-3 mol·L^-1 (R=0.9996) with a detection limit of 7.1×10^-7 mol·L^-1 (S/N=3). The sensing electrode exhibited good sensitivity, selectivity and repeatability.

Electrochemiluminescence Assay Based On Bipolar Electrode For Bioanalysis, Mei-Sheng Wu, Jing-Juan Xu, Hong-Yuan Chen

Journal of Electrochemistry

Bipolar electrodes (BPEs) are electronic conductors which are usually embedded into microchannels. The potential difference at the BPE/solution interface is obtained by applying a voltage at the two ends of the microchannel. When it reaches a critical value, the redox reaction takes place at both poles of the BPE simultaneously. Compared with other detection methods, the electrochemiluminescence (ECL) platform based on BPE possesses the advantages of concentration enrichment, high sensitivity, low cost, portable sensor system, no need for a light source, which is quite suitable for bioanalysis. This paper reviews the ECL-BPE strategy for bioanalysis and proposes the future research …

An Enzymatic Ethanol/O2 Biofuel Cell Powered By Commercial Vodka Fuel, Yi-Ming Yan, Lan-Qun Mao

Journal of Electrochemistry

This study demonstrates the performance of a new type alcohol/O₂ biofuel cell assembled by using alcohol dehydrogenase (ADH) and bilirubin oxidase (BOD) as the biocatalysts of the bioanode and the biocathode for the bioelectrocatalytic oxidation of alcohol and reduction of oxygen, respectively. To construct the bioanode and the biocathode, single-walled carbon nanotubes (SWCNTs) were used. In the bioanode, SWCNTs were used as the supporting materials for both methylene green (MG) which was used as the electrocatalyst for the oxidation of NADH and ADH. The as-constructed MG/ADH/SWCNTs-based bioanode exhibits a good activity toward the bioelectrocatalytic oxidation of ethanol. In the …

Sensitive Detection Of Hydroxyl Radical Based On Silver-Enhanced Gold Nanoparticle Label, Yan Yang, Peng Yu, Xiao-Hua Zhang, Jin-Hua Chen

Journal of Electrochemistry

A novel DNA-based electrochemical sensor has been successfully constructed for sensitive detection of hydroxyl radical (·OH) based on the silver-enhanced gold nanoparticle label. Thiolated DNA1 was firstly immobilized on the gold electrode through Au—S bonds. The ·OH generated from Fenton reaction could induce serious oxidative damage of the DNA1 layer on the electrode surface. Then DNA2-functionalized gold nanoparticles (DNA2-AuNPs) were linked on the electrode through the hybridization between DNA2 and undamaged DNA1. Based on the catalytic reduction of silver ion by AuNPs, a silver layer was formed on the surface of AuNPs. The quantitative assay of ·OH was carried out …

Electrochemical Detection Of L-Cysteine Based On Iron Phthalocyanine/Nitrogen-Doped Graphene Modified Electrodes, Jing-Jing Xiao, Hui-Ying Xu, Li Xu, Bao-Hong Liu

Journal of Electrochemistry

In this study, we report a facile method to develop FePc/N-G hybrid modified electrode for the detection of L-cysteine. The electrochemical sensor was characterized by cyclic voltammetry and amperometric response. The sensor exhibited a wider linear range with rapid response which has outperformed pure FePc/GCE, highlighting the important role of nitrogen doped graphene as substrate for improving the electrochemical response property.

Nanosized Fe2O3 On Three Dimensional Hierarchical Porous Graphene-Like Matrices As High-Performance Anode Material For Lithium Ion Batteries, Qin-Wei Zhang, Yun-Yong Li, Pei-Kang Shen

Journal of Electrochemistry

Ferric oxide (Fe₂O₃) as a promising anode material for lithium ion battery is due to its high theoretical capacity (1007 mAh·g^-1), earth abundance and low cost. The nanosized Fe₂O₃ on the three dimensional hierarchical porous graphene-like network (denoted as Fe₂O₃-3D HPG) has been synthesized by homogeneous precipitation and heat treatment. The 3D HPG can provide a highly conductive structure in conjunction to support well contacted Fe₂O₃ nanoparticles, and effectively enhance the mechanical strength of the matrices during volume changes, as well as improve the …

Preparation And Properties Of Titanium Based Metal Oxide Electrodes For Ammonia Nitrogen Wastewater Treatment, Xue Li, Meng Xue, Ling Huang, Jun-Tao Li, Shi-Gang Sun

Journal of Electrochemistry

In this paper, four types of titanium based metal oxides electrodes were prepared by thermal decomposition method: Ti/SnO₂+Sb₂O₃, Ti/SnO₂+Sb₂O₃/SnO₂+IrO₂, Ti/SnO₂+Sb₂O₃/SnO₂+RuO₂, Ti/SnO₂+Sb₂O₃/SnO₂+CeO₂. The XRD results show that CeO₂ in Ti/SnO₂+Sb₂O₃/SnO₂+CeO₂ displayed a good crystal structure, and there was no significant oxygen evolution reaction occurred after electrolytic oxidation. Compared with the other three electrodes, the Ce-doped …

Naio4 Oxidation Of Mussel Adhesive Protein Film And Its Corrosion Protection For Mg-1.0ca Alloy, Rui-Qing Hou, Ping-Li Jiang, Shi-Gang Dong, Chang-Jian Lin

Journal of Electrochemistry

The effect of oxidation of mussel adhesive protein (Mefp-1) film on the corrosive resistance for Mg-1.0Ca alloy was investigated by scanning electron microscopy (SEM), atom force microscopy (AFM), electron probe microanalysis (EPMA), Infrared reflection absorption spectroscopy (IRAS) and electrochemical methods. The results showed that the NaIO₄ induced oxidation of the pre-formed Mefp-1 film with porous morphology involved structural change of the DOPA group in the protein and resulted in a more uniform film with net-like morphology. The protein film without oxidation had an increasing resistance for the corrosion of Mg-1.0Ca alloy up to 7 days exposure. After oxidation, Epit …

Effects Of Etchants On Surface Morphologies And Electrochemical Performance Of Iro2-Mno2 Anodic Nano-Coatings, Qing-Guo Fan, Zhi-Guo Ye, Hui-Min Meng, Chun-Min Lu

Journal of Electrochemistry

The IrO₂-MnO₂ anodic nano-coatings were prepared by the traditional thermal decomposition method on the different surfaces of Ti substrates pretreated by different etchants (HCl, H₂SO₄, C₂H₂O₄ and HF). Surface morphologies and electrochemical performance of the Ti based IrO₂-MnO₂ anodic coatings were investigated by field emission scanning electron microscopy (FESEM), cyclic voltammetry (CV) and polarization techniques. Analysis showed that the denser IrO₂ nano-particles with longer dimensions were obtained at the IrO₂-MnO₂ anodic coating surfaces on the Ti substrates etched by HF and …

Highly-Selective Chemiresistive Sensing And Analysis Of Vapors Using Functionalized Nanotubes, Deon Hines

Dissertations, Theses, and Capstone Projects

Specifically, the project involves the development of a diversified array of nanostructured gas-sensors comprised of selectively, novel surface-functionalized carbon nanotubes (for analyte selectivity by virtue of functionality). Harnessing carbon nanotubes with various electron withdrawing and donating groups help in determining their affinity toward certain prognostic gaseous markers thus increasing specificity of such created sensors. We have devised synthetic routes that have led to the facile production of covalently polyfunctionalized nanotubes in high yield. Seven carbon nanotube analogues were systematically considered and then chemically synthesized, from pristine single-walled nanotubes (SWNT's), for use as the main component of sensory units that was …

Label-Free Detection Of Cancer Cells With Polysilicon Sensor Chips And Biomolecule-Assisted Synthesis Of Shape-Controlled Nanoparticles, Menglu Shi

Dissertations, Theses, and Capstone Projects

Constant effort has been made for the detection of cancer cells. Recently, ovarian and kidney cancer cell lines have been shown to have higher cellular elasticity as compared to normal cells assessed by monitoring the degree of deformation under hyposmotic pressure. This method has been modified and applied to various cases. In cancer cells, the oncogenic mutant p53 (mtp53) protein is present at high levels and contributes to tumor growth and metastasis. Herein the influence of mtp53 on the mechanical property of breast cancer cells was assessed by monitoring the swelling ratio of cells with time using the impedance measurements. …

Synthesis And Characterization Of A Novel Polyacetal & Design And Preparation Of Superhydrophobic Photocatalytic Surfaces, Yuanyuan Zhao

Dissertations, Theses, and Capstone Projects

Polyacetal polymers are thermoplastic resins that play an important role in industry because of numerous industrial applications including automobile; household appliance; etc. The first part of this thesis (Chapter 2) is about the synthesis of a new acetal copolymer that exhibits superior thermal stability. The second part of this thesis (Chapter 3) is about the preparation and applications of TiO₂-based polymer nanocomposite films, where the reactive oxygen species (ROS) are generated on the solid surface. Catalytic nanocomposite films are an active area of research because of their potential uses for environmental remediation and chemical synthesis. Furthermore, to …

Biomolecule Mediating Synthesis Of Inorganic Nanoparticles And Their Applications, Zengyan Wei

Dissertations, Theses, and Capstone Projects

Project 1.

The conventional phage display technique focuses on screening peptide sequences that can bind on target substrates, however the selected peptides are not necessary to nucleate and mediate the growth of the target inorganic crystals, and in many cases they only show moderate affinity to the targets. Here we report a novel phage display approach that can directly screen peptides catalytically growing inorganic nanoparticles in aqueous solution at room temperature. In this study, the phage library is incubated with zinc precursor at room temperature. Among random peptide sequences displayed on phages, those phages that can grow zinc oxide (ZnO) …

2015 Oklahoma Research Day Full Program, Northeastern State University

Oklahoma Research Day Abstracts

This document contains all abstracts from the 2015 Oklahoma Research Day held at Northeastern State University.

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Multiple-Choice Testing Using Immediate Feedback-Assessment Technique (If At®) Forms: Second-Chance Guessing Vs. Second-Chance Learning?, Jeremy D. Merrel, Pier F. Cirillo, Pauline M. Schwartz, Jeffrey Webb

Chemistry and Chemical Engineering Faculty Publications

Multiple choice testing is a common but often ineffective method for evaluating learning. A newer approach, however, using Immediate Feedback Assessment Technique (IF AT®, Epstein Educational Enterprise, Inc.) forms, offers several advantages. In particular, a student learns immediately if his or her answer is correct and, in the case of an incorrect answer, has an opportunity to provide a second response and receive partial credit for a correct second attempt. For a multiple choice question with five possible answers, the IF AT® form covers spaces labeled A through E with a thin opaque film; when the film is scratched away, …

Exploring The Use Of Faded Worked Examples As A Problem Solving Approach For Underprepared Students, Tiffany Hesser, Jess L. Gregory

Chemistry and Chemical Engineering Faculty Publications

It is not uncommon for students to find themselves underprepared when entering a post secondary institution. In additional to lower levels of academic achievement, underprepared students may not be aware that they lack the skills needed to be successful and effectively acquire and process information. Because of this, students that enter post-secondary institutions underprepared often require more support in and out of the college classroom.

In computational based classes, such as math, engineering, chemistry or physics, this support often includes an introduction to effective problem solving strategies. This study introduced faded worked examples as a problem solving approach to students …

Analyzing Free-Base Nicotine Content In The Particulate Matter Of Mainstream Tobacco Smoke Using A Headpace Solid-Phase Microextraction Gc/Ms Method, Christopher S. Motti

Civil and Environmental Engineering Master's Project Reports

The acid/base chemistry of cigarette smoke allows nicotine, the primary drug in mainstream tobacco smoke, to exist in protonated and free-base forms. Evidence suggests that most of the nicotine present in mainstream tobacco smoke is in the particle phase. α_fb is the fraction of particle-phase nicotine in the free-base form. The magnitude and rate of nicotine deposition in the respiratory tract is dependent on α_fb because only the free-base form of nicotine can volatilize from the particle phase of an inhaled aerosol and, once gaseous, rapidly deposit. This study develops a headspace solid-phase microextraction technique coupled with gas …

On The Catalytic Activity Of Palladium Nanoparticles-Based Anodes Towards Formic Acid Electro-Oxidation: Effect Of Electrodeposition Potential, Islam M. Al-Akraa Dr., Ahmad M. Mohammad Prof, Mohamed S. El-Deab Prof, Bahgat E. El-Anadouli Prof

Chemical Engineering

In this investigation, the catalytic activity of palladium nanoparticles (PdNPs)-modified glassy carbon (GC) (simply noted as PdNPs/GC) electrodes towards the formic acid electro-oxidation (FAO) was investigated. The deposition of PdNPs on the GC substrate was carried out by a potentiostatic technique at different potentials and the corresponding influence on the particles size and crystal structure of PdNPs as well as the catalytic activity towards FAO was studied. Scanning electron microscopy (SEM) demonstrated the deposition of PdNPs in spherical shapes and the average particle size of PdNPs deposited at a potential of 0 V vs. Ag/AgCl/KCl(sat.) was the smallest (ca. 8 …

Advances In Direct Formic Acid Fuel Cells: Fabrication Of Efficient Ir/Pd Nanocatalysts For Formic Acid Electro-Oxidation, Islam M. Al-Akraa, Ahmad M. Mohammad, Mohamed S. El-Deab Prof, Bahgat E. El-Anadouli Prof

Chemical Engineering

No abstract provided.

Instrumentation And Development Of A Mass Spectrometry System For The Study Of Gas-Phase Biomolecular Ion Reactions, Ziqing Lin

Open Access Dissertations

Gas-phase reactions of biomolecular ions are highly relevant to the understanding of structures and functions of the biomolecules. Mass spectrometry is a powerful tool in investigating gas-phase ion chemistry. Various mass spectrometers have been developed to explore ion/molecule reactions, ion/ion reactions, ion/photon reactions, ion/radical reactions etc., both at atmospheric pressure and in vacuum. In-vacuum reactions have an advantage of involving pre-selecting the ions for the reactions using a mass analyzer. Over the decades, a variety of mass analyzers have been employed in the research of ion chemistry. Hybrid configurations, such as quadrupole ion trap with a time-of-flight and or a …

Structure-Activity Relationships For The Water-Gas Shift Reaction Over Supported Metal Catalysts, Kaiwalya D. Sabnis

Open Access Dissertations

The Water-Gas Shift (WGS) reaction (CO + H₂O → CO₂ + H₂) is an important chemical process for industrial hydrogen production. The overall goal of this project is to use kinetic experiments and in situ characterization techniques in tandem, in order to derive structure-activity relationships for various catalytic systems. These relationships facilitate the rational catalyst design by identification of catalyst descriptors. In order to establish such relationships, various studies were undertaken, such as (i) effect of transition admetals on the WGS catalysis by molybdenum carbide (ii) effect of residual oxygen content on the performance of …

Initiated Chemical Vapor Deposition (Icvd) Polymer Thin Films : Structure-Property Effects On Thermal Degradation And Adhesion, Vijay Jain Bharamaiah Jeevendrakumar

Legacy Theses & Dissertations (2009 - 2024)

Opportunities and challenges for chemical vapor deposition (CVD) of polymer thin films stems from their applications in electronics, sensors, and adhesives with demands for control over film composition, conformity and stability. Initiated chemical vapor deposition (iCVD) is a subset of the CVD technique that conjoins bulk free-radical polymerization chemistry with gas-phase processing. The novelty of iCVD technique stems from the use of an initiator that can be activated at low energies (150 – 300 °C) to react with surface adsorbed monomer to form a polymer film. This reduces risk for potential unwarranted side-reactions.

Characterization Of Metallic And Semimetallic Oxide Nanoparticles In Industrial Wastewater And Associated Toxicity, Gary Roth

Legacy Theses & Dissertations (2009 - 2024)

Engineered nanomaterials (ENMs) play an increasing role in manufacturing and consumer products. Currently, there is no standard approach to studying ENM toxicity, and a growing body of literature suggests that ENMs may have toxicity differing from similar compounds in bulk or dissolved form. I examined ENMs used in the semiconductor manufacturing process called chemical-mechanical planarization (CMP) for their properties, removal in the wastewater treatment system (WWT), in-vitro toxicity, and location post-inhalation in-vivo. It was found that ENMs in CMP slurries have morphology determined by their elemental composition, but assessment of size and concentration can differ substantially between accepted techniques. Particles …

Two-Dimensional Chalcogenides : Material Synthesis And Nano-Device Applications, Robin Bay Jacobs-Gedrim

Legacy Theses & Dissertations (2009 - 2024)

Low-dimensional nanostructures exhibit distinct properties from their bulk counterparts. Here the synthesis of novel low-dimensional nanostructures is demonstrated using both top down and bottom up processes and their properties are investigated. Two-dimensional (2D) binary sesquichalcogenides are introduced as a viable material platform for phase change random access memory, photodetection, and the investigation of topological insulator surface states. An exponential relationship is observed between layer thickness and energy consumption during switching of 2D phase change devices, ultra-high responsivity in 2D photoresistors, and surface-rich conduction in 2D topological insulator nanoplates. Additionally, methods for the assessment of chemical purity, stoichiometry, and dimensions of …

Characterization Of Kendex® 0834 (Heavy Resins) & Kendex® 0897 (Light Resins), Victor Correa

Open Access Theses & Dissertations

Characterization of crude oil and some of its refined products has always been a challenge in the refining industry. This is mainly due to the high molecular complexity of crude oil. In this research, Heavy and Light Resins extracted from Penn Grade crude oil were analyzed with a wide variety of techniques, ranging from X-Ray Diffraction, Electron Microscopy, Fourier Transformed Infrared, C-13 Nuclear Magnetic Resonance, and chromatographic methods. An asphaltene extraction protocol was performed on both products. Only the Heavy Resin sample yielded a low amount of asphaltene. Results show that both Resins have a high degree of carbon branching, …

Inhalable Nanocomposites And Anticancer Agents For Cancer Therapy, Nathanael A. Stocke

Theses and Dissertations--Chemical and Materials Engineering

Cancer is designated as the leading cause of mortality worldwide and lung cancer is responsible for nearly 30% of all cancer related deaths. Over the last few decades mortality rates have only marginally increased and rates of recurrence remain high. These factors, among others, suggest the need for more innovative treatment modalities in lung cancer therapy. Targeted pulmonary delivery is well established for treating pulmonary diseases such as asthma and provides a promising platform for lung cancer therapy. Increasing local deposition of anticancer agents (ACAs) and reducing systemic exposure of these toxic moieties could lead to better therapeutic outcomes and …

Synthesis Of Different Sizes & Functions Nanoparticles, Jiaming Geng

Masters Theses

"Nanogels, whose size range from 1 to 100nm, have been interested in many research areas: cosmetics, pharmaceuticals, catalysts, photochemistry, and in optical switches or sensors. In Petroleum Engineering area, nanogels can be used as conformance control agent and emulsion stabilizer. And after grafting functional groups or hybrid, nanogels can be used as tracer for the visual modeling.

Though nanoparticles have been studied for more than 20 years, few of them are about nanogels. In the thesis, stirring rate, surfactant type and concentration were found have a large impact on the synthesis of nanogels. And cationic nanogels have salt and acid …