Chemistry Commons^™

Cvd Preparation And Application Of 3d Graphene In Electrochemical Energy Storage, Yong-Kang Xia, Ming-Yuan Gu, Hong-Guan Yang, Xin-Zhi Yu, Bing-An Lu

Journal of Electrochemistry

Three-dimensional (3D) graphene combinations with the excellent intrinsic properties of graphene and the 3D micro/nano porous structures provide a graphene foam with high specific surface area, excellent mechanical strength and fast electron and mass transports. The 3D graphene foam and its composite nanomaterials are widely used in the fields of nano-electronics, energy storage, chemical and biological sensing. The 3D graphene foam prepared by chemical vapor deposition (CVD) method is of high purity and crystallinity.  In this review, a brief overview in the CVD preparations of 3D graphene and properties of CVD prepared 3D graphene based nanomaterials in electrochemical energy storage …

Applications Of Advanced Imaging Technologies For Critical Issues Of All-Solid-State Lithium Battery Studies, Yi-Bo Zhao, Hui-Hui Liu, Song-Liang Chen, Shou-Hang Bo

Journal of Electrochemistry

All-solid-state lithium batteries have attracted much attention for their high energy density and good safety. To increase their efficiency and prolong their service life, it is necessary to achieve high ion conductivity at the electrode/electrolyte interface and in the electrolyte, as well as to eliminate dendrites growth in the battery. Based on the critical requirements outlined above, this paper discusses the applications of advanced imaging technologies in relevant studies. Recent progresses in investigations of all-solid-state lithium batteries by imaging techniques including electron microscopy, scanning probe microscopy, X-ray tomography, magnetic resonance imaging and optical microscopy are summarized.

Synthesis Of Flower-Like Vanadium Disulfide For Lithium Storage Application, Pan Li, Jian Liu, Wei-Yi Sun, Hai-Xia Li, Zhan-Liang Tao

Journal of Electrochemistry

In order to improve the electrochemical properties of vanadium disulfide (VS₂) as an electrode material in Li-ion battery, the flower-like VS₂ was prepared by a one-step hydrothermal method with the addition of polyethylene glycol 400. The phase and morphology of the product were characterized by using X-ray diffraction and field emission scanning electron microscopy. During the growth process, it was observed that the flower-like VS₂ was interspersed with several hexagonal vanadium disulfide nanosheets, which had a high specific surface area and excellent structural stability. The flower-like VS₂ was used for the cathode material test in …

Ni/Mn3O4/Nimn2O4 Double-Shelled Hollow Spheres Embedded Into Reduced Graphene Oxide As Advanced Anodes For Sodium-Ion Batteries, Chong Yan, Hua-Ri Kou, Bo Yan, Xiao-Jing Liu, De-Jun Li, Xi-Fei Li

Journal of Electrochemistry

Delicately building the unique nanocomposite with the combination of hollow structure and reduced graphene oxide (rGO) is highly desirable and still remains a great challenge in the field of energy conversion and storage. In this work, Ni/Mn₃O₄/NiMn₂O₄ double-shelled hollow spheres coated by rGO (denoted as R-NMN) have been successfully synthetized via one-step rapid solvothermal treatment followed by subsequent annealing for the first time. Served as anodes for sodium ion batteries (SIBs), the R-NMN composite containing 25wt% rGO exhibits a high discharge capacity of 187.8 mAh·g^-1 after 100 cycles at 50 mA·g^{-1 …}

Preface On Special Issue Of Next-Generation Secondary Batteries, Zhen Zhou, Quan-Feng Dong

Journal of Electrochemistry

No abstract provided.

Method Of Increasing Mass Transfer Rate Of Acid Gas Scrubbing Solvents, Joseph E. Remias, Cameron A. Lippert, Kunlei Liu

Center for Applied Energy Research Faculty Patents

A method of increasing the overall mass transfer rate of acid gas scrubbing solids is disclosed. Various catalyst compounds for that purpose are also disclosed.

Fundamental Limits Of Measuring Single-Molecule Rotational Mobility, Oumeng Zhang, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Various methods exist for measuring molecular orientation, thereby providing insight into biochemical activities at nanoscale. Since fluorescence intensity and not electric field is detected, these methods are limited to measuring even-order moments of molecular orientation. However, any measurement noise, for example photon shot noise, will result in nonzero measurements of any of these even-order moments, thereby causing rotationally-free molecules to appear to be partially constrained. Here, we build a model to quantify measurement errors in rotational mobility. Our theoretical framework enables scientists to choose the optimal single-molecule orientation measurement technique for any desired measurement accuracy and photon budget.

Substrate-Dependent Photoconductivity Dynamics In A High-Efficiency Hybrid Perovskite Alloy, Ali Moeed Tirmzi, Jeffrey A. Christians, Ryan P. Dwyer, David T. Moore, John A. Marohn

Faculty Publications

Films of (FA_0.79MA_0.16Cs_0.05)_0.97Pb(I_0.84Br_0.16)_2.97 were grown over TiO₂, SnO₂, indium tin oxide (ITO), and NiO. Film conductivity was interrogated by measuring the in-phase and out-of-phase forces acting between the film and a charged microcantilever. We followed the films’ conductivity versus time, frequency, light intensity, and temperature (233−312 K). Perovskite conductivity was high and light-independent over ITO and NiO. Over TiO₂ and SnO₂, the conductivity was low in the dark,increased with light intensity, and persisted for 10’s of seconds after the light …

An Experimental And Numerical Investigation Of Flow Accelerated Flibe Corrosion, David B. Weitzel

Nuclear Engineering ETDs

Renewed interest in molten salt reactor technology has brought to light the need for a better understanding of FLiBe corrosion. To this end a flowing FLiBe corrosion test loop was designed to test the flow effects of FLiBe corrosion. The loop consists of a pump, melt tank, and stainless-steel tubing assembly that heats the molten salt to high temperatures and circulates it over test specimens. The experiment has been constructed and has completed initial shakedown testing.

To support the flowing FLiBe experiment, a numerical corrosion model that couples FLiBe electrochemistry, solid metal diffusion, and mass transport was implemented. The model …

Facile Synthesis Of A Tailored-Designed Au/Pt Nanoanode For Enhanced Formic Acid, Methanol, And Ethylene Glycol Electrooxidation, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Ahmad M. Mohammad Prof

Chemical Engineering

The recent revolution in nanoscience and global energy demand have motivated research in liquid fuel cells (LFCs) due to their enhanced efficiency, moving flexibility, and reduced contamination. In line with this advancement, a glassy carbon (GC) electrode was modified with platinum (PtNPs) and gold (AuNPs) nanoparticles to fabricate a nanosized anode for formic acid, methanol, and ethylene glycol electrooxidation (abbreviated, respectively, to FAO, MO, and EGO), of the key anodic reactions of LFCs. The deposition sequence of the catalyst’s layers was important where the Au/Pt/GC electrode (in which PtNPs were directly deposited onto the GC surface followed by AuNPs—surface coverage …

Ua84 Sigma Chi, Wku Archives

WKU Archives Collection Inventories

Records created by and about the WKU chapter of Sigma Xi.

Anchoring Cu 1 Species Over Nanodiamond-Graphene For Semi-Hydrogenation Of Acetylene, Fei Huang, Yuchen Deng, Yunlei Chen, Xiangbin Cai, Mi Peng, Zhimin Jia, Jinglin Xie, Dequan Xiao, Xiaodong Wen, Ning Wang, Zheng Jiang, Hongyang Liu, Ding Ma

Chemistry and Chemical Engineering Faculty Publications

The design of cheap, non-toxic, and earth-abundant transition metal catalysts for selective hydrogenation of alkynes remains a challenge in both industry and academia. Here, we report a new atomically dispersed copper (Cu) catalyst supported on a defective nanodiamondgraphene (ND@G), which exhibits excellent catalytic performance for the selective conversion of acetylene to ethylene, i.e., with high conversion (95%), high selectivity (98%), and good stability (for more than 60 h). The unique structural feature of the Cu atoms anchored over graphene through Cu-C bonds ensures the effective activation of acetylene and easy desorption of ethylene, which is the key for the outstanding …

A Versatile Route To Fabricate Single Atom Catalysts With High Chemoselectivity, Xiaohui He, Qian He, Yuchen Deng, Mi Peng, Hongyu Chen, Ying Zhang, Siyu Yao, Mengtao Zhang, Dequan Xiao, Ding Ma, Binghui Ge, Hongbing Ji

Chemistry and Chemical Engineering Faculty Publications

Preparation of single atom catalysts (SACs) is of broad interest to materials scientists and chemists but remains a formidable challenge. Herein, we develop an efficient approach to synthesize SACs via a precursor-dilution strategy, in which metalloporphyrin (MTPP) with target metals are co-polymerized with diluents (tetraphenylporphyrin, TPP), followed by pyrolysis to N-doped porous carbon supported SACs (M₁/N-C). Twenty-four different SACs, including noble metals and non-noble metals, are successfully prepared. In addition, the synthesis of a series of catalysts with different surface atom densities, bi-metallic sites, and metal aggregation states are achieved. This approach shows remarkable adjustability and generality, providing …

Rare-Earth-Activated Group Vi D0 Metal Oxides As Thermosensitive Phosphors, Samarage Sameera Perera

Wayne State University Dissertations

ABSTRACT

RARE-EARTH-ACTIVATED GROUP VI d0 METAL OXIDES AS

THERMOSENSITIVE PHOSPHORS

by

SAMARAGE SAMEERA PRASAD PERERA

AUGUST 2019

Advisor: Dr. Federico A. Rabuffetti

Major: Chemistry

Degree: Doctor of Philosophy

Thermosensitive phosphors are solid-state materials that demonstrate distinct dependence of luminescence emission on temperature. These materials enable optical temperature sensing in environments where conventional thermometry is not possible (e.g., gas turbines, combustion engines, surface temperature distributions). However, the design of thermosensitive phosphors that show adequate sensitivity and low thermal quenching in the intermediate temperature range (i.e., 500–1000 K) remains challenging. This challenge can be addressed by understanding how to rationally manipulate the …

A Promising Modification Of Pt Surfaces With Cnts For Decreasing Poisoning Impact In Direct Methanol Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Aya A. Khalifa Ms.

Chemical Engineering

Direct methanol fuel cells (DMFCs) are clean energy sources that have many applications due to the high energy density of methanol as a fuel. However, this type of fuel cells (FCs) has limitations that are preventing it from being commercialized. One such limitation is the adsorption of intermediates such as CO into the surface of the Platinum (Pt) catalyst during methanol oxidation (MO) which deactivates its active sites, where the reaction is taking place, and leads to poisoning of the electrode over the long term. In this study, multi-walled carbon nanotubes (MWCNTs) have been introduced to the Pt-modified glassy carbon …

Enhanced Electro-Oxidation Of Methanol At Pt-Au Nanocatalyst For Direct Methanol Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Ahmad M. Mohammad Prof

Chemical Engineering

In this investigation, a Pt-Au nanocatalyst prepared by the coelectrodeposition of Pt (PtNPs) and Au (AuNPs) nanoparticles is assembled onto a glassy carbon (GC) electrode for efficient methanol oxidation (MO). Several molar ratios between PtNPs and AuNPs have been used and the corresponding catalytic activity towards MO is tracked. The Pt1:Au1 catalyst showed the highest catalytic activity (5 times higher oxidation peak current (Ip) and a 126 mV negative shift in the onset potential (Eonset) toward MO). The catalyst’s morphology, composition and activity are investigated and the ehancement mechanism is recognized.

A Simple And Effective Way To Overcome Carbon Monoxide Poisoning Of Platinum Surfaces In Direct Formic Acid Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Sohair A. Darwish Ms

Chemical Engineering

A glassy carbon (GC) electrode modified with multi-walled carbon nanotubes (MWCNTs) and platinum nanoparticles (PtNPs), Pt/MWCNTs-GC, has been introduced for formic acid electro-oxidation (FAO). A similar loading of PtNPs has been conserved for a proper comparison between the Pt/MWCNTs-GC and the unmodified Pt/GC electrodes. The modification with MWCNTs could enhance the loading of PtNPs onto the GC electrode in a way that minimizes its agglomeration and increases its dispersion in the CNTs network. This not only increases the surface area exposed to the reaction but also interrupts the contiguity of the Pt active sites minimizing the adsorption of the poisoning …

Mass Spectrometry Analysis Of Contaminants Of Emerging Concern: Nanoparticles, Algal Toxins, And Cyanotoxins In Natural Waters And Their Potential Health Impacts, Ariel R. Donovan

Doctoral Dissertations

“The analysis of contaminants of emerging concern is critical to protecting environmental health. In the presented dissertation, two groups of contaminants of emerging concern were assessed using mass spectrometry methods: nanoparticles and algal and cyanotoxins.

Analysis of metal oxide nanoparticles in environmental matrices has been a challenging issue, as most traditional methods require complicated sample preparation methods or that can alter or destroy the nanoparticles in the system. Single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) methods were used to detect metal oxide nanoparticles in surface waters and their removal through drinking water treatment simulations while retaining all information regarding …

Development Of Functional Ionic Liquids For Separation And Recovery Of Rare Earth Elements, Mostafa Khodakarami

Doctoral Dissertations

“This research focused on the design and synthesis of task-specific ionic liquids for enhanced extraction and separation of rare earth elements (REEs). Two novel ammonium-based functional ionic liquids (FILs) with oxygen donating groups: trioctyl(2-ethoxy-2-oxoethyl)ammonium dihexyl diglycolamate, [OcGBOEt][DHDGA], and tricaprylmethylammonium dihexyl diglycolamate, [A336][DHDGA] were synthesized and tested for the recovery and separation of selected REEs from aqueous solutions. Functionalities with different denticities were incorporated into both anionic and cationic parts of ionic liquids, which are solely composed of incinerable atoms including C, H, O, and N. The structural, physical, and chemical properties of the synthesized FILs were studied using nuclear magnetic …

Synthesis Of Cadmium Arsenide Semiconductor Nanoparticles, Superatomic Silver Clusters, And Silver Coordination Polymers, Sarthak Jashubhai Patel

Legacy Theses & Dissertations (2009 - 2024)

Nanomaterials have chemical, electronic, optical, and other properties distinct from their bulk counterparts. However, the atom-precise synthesis of these materials remains a challenge, leaving open many scientific questions regarding the size regime between nanoparticulate (quantum confined) and bulk character. In this work, efforts toward the synthesis of nanoparticulate and atom-precise metal and semimetal materials are described. The synthesis of II-V semiconductor Cd3As2 having a near-zero bandgap is discussed. Analysis by UV-Vis absorption spectroscopy and powder X-ray diffraction indicate the formation of material with unexpected crystallinity and absorption properties The interaction between the molecular source of As and the solvent was …

Synthesis And Adsorption Experiments With Metal-Organic Frameworks For High School And Undergraduate Laboratory Settings, Kate Holley

Legacy Theses & Dissertations (2009 - 2024)

Seven experiments are described and outlined here that introduce high school and undergraduate students to metal–organic frameworks (MOFs) and their applications. The experiments were designed to be completed with basic laboratory equipment and supplies and without the use of expensive characterization instruments, simulating typical high school chemistry laboratory conditions. Students synthesized two well-known MOFs, HKUST-1 and aluminum fumarate, using simple, safe, and rapid methods (fast enough to be performed within the time constrains of a typical high school class). Students then use their synthesized MOFs to explore their inherent sorption properties. In one set of experiments, the synthesized MOFs are …

Synthesis, Characterization And Antibacterial Properties Of Silver(I) N-(4-Pyridyl) Benzamide Complexes With Varying Conterions, Mauro J. Ruiz

Open Access Theses & Dissertations

Organic semiconductor materials composed of - stacking aromatic compounds have been under intense investigation for their potential uses in flexible electronics and other advanced technologies. Herein we report a new family of seven - stacking compounds of Silver(I) N-(4-pyridyl) Benzamide with varying counterions, namely [Ag(NPBA)2]X, where NPBA is N-(4-pyridyl) Benzamine, X = NO3- (1), ClO4- (2), CF3SO3- (3), PF6- (4), BF4- (5), CH3PhSO3- (6), and PhSO3- (7), which form extended - stacking networks in one-dimensional (1D), 2D and 3D directions in the crystalline solid-state via the phenyl moiety, with average inter-ring distances of 3.823 Å. Interestingly, the counterions that contain …

Removal Of Antimony And Bismuth From Copper Electrorefining Electrolyte By Two Proprietary Solvent Extraction Extractants, Andrew Artzer

Masters Theses

"Antimony and bismuth are two of the most problematic impurities in copper electrorefining (ER). Because of this, much research has been done investigating the ways to remove them. Processes that are currently being used industrially include anode additions, liberators, ion exchange (IX), and solvent extraction (SX). Of these, liberators and anode additions are the most common while SX is the least, mostly being used for arsenic removal. There are other methods that have been evaluated, but are not in commercial use. These include the use of various electrolyte additives, and adsorbents such as bentonite clay and heavy metal sulfates.

Two …

Uv-Curable Organic-Inorganic Hybrid Polyurethane Coating, Shiyin Yu

Master's Theses and Doctoral Dissertations

This thesis explored a series of organic-inorganic hybrid polyurethane oligomers with varying molecular weights and functional groups (acrylate and/or silane) that were cured with a single ultraviolet (UV) trigger but two photo-initiators. Upon UV irradiation, the free-radical initiator initiated a free-radical reaction for acrylate cross-linking, and the photo-latent base initiated a sol-gel reaction for condensation of the silanes. This study explored the cure extent of both reactions by FTIR for acrylates and silanes and a weight-loss method for silanes as a function of functional group concentration and time. The general film properties were also studied. The results showed that the …

Multidimensional Mass Spectrometry Of Chemonic™ Ccg-6 Nonionic Surfactant With Separation By Polarity And Shape, Charles Johnson

Williams Honors College, Honors Research Projects

Chemonic™ CCG-6 surfactant is a water-soluble poly(ethylene glycol) (PEG) conjugated alkyl glyceride emollient. This surfactant exists as a complex mixture of a glycerol cores conjugated with poly(ethylene glycol) branches (PEGylation) that were partially esterified with caprylic (C8) and capric (C10) acids. These may be esterified on one, two, or all three arms of the glyceride. The architecture of the structures in this mixture was studied using multidimensional mass spectrometry (MS). Mass spectrometry was interfaced with ultra-performance liquid chromatography (UPLC) and ion mobility (IM) separation. The mixture was separated by reversed-phase LC, oligomers of the star-branched polymer were separated according to …

Novel Adsorbent For Industrial Wastewater Treatment Applications, Islam M. Al-Akraa, Ahmed Y. Zakaria Eng, Dalia A. Ali Eng, Hany A. Elazab Dr, Hoda A. Elsawy Dr

Chemical Engineering

In this study, the hydroxyapatite powder is investigated for both of methylene blue and thymol blue in aqueous solution. The physical and chemical properties of the adsorbent were evaluated systematically using the different techniques including Microsoft Excel programming, linear regression model and also the coefficient of determination. Batch adsorption experiments were conducted to determine the effect of contact time, solution pH, initial dye concentrations, and also the adsorbent dosage on adsorption. The adsorption kinetic parameters confirmed the better fitting of pseudo-second order kinetic model for both of methylene blue and thymol blue. The isotherm data of methylene blue and thymol …

Spatial Fingerprinting Of Biogenic And Anthropogenic Volatile Organic Compounds In An Arid Unsaturated Zone, Christopher T. Green, Wentai Luo, Christopher H. Conaway, Karl B. Haase, Ronald J. Baker

Chemistry Faculty Publications and Presentations

Subsurface volatile organic compounds (VOCs) can pose risks to human and environmental health and mediate biological processes. Volatile organic compounds have both anthropogenic and biogenic origins, but the relative importance of these sources has not been explored in subsurface environments. This study synthesized 17 yr of VOC data from the Amargosa Desert Research Site in Nevada with the goal of improving understanding of spatial and temporal variations that distinguish sources of VOCs from a landfill and from ambient sources including biogenic VOCs (bVOCs). Gas samples were collected from 1999 to 2016 from an array of shallow sample points (0.5- and …

Tools For Understanding Static Structure Factors And Their Application To Simulations Of Liquids, Travis Mackoy

Graduate Research Theses & Dissertations

Molecular dynamics (MD) simulations can be used to compute static structure factors (��(��)) and provide an interpretation of the underlying periodic atomic ordering. MD simulations complement experimentally measured ��(��) by allowing qualitative assignment of peaks to various ordering, such as cation-anion ordering in ionic liquids, via decomposition of ��(��) into partial ��(��). Here we present a method for classifying interatomic distances that allows for quantitative peak assignment and visualization of atoms that contribute most to each peak in calculated ��(��) for soft materials. The method is illustrated by investigating ��(��) for the ionic liquid 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl)imide (C4C1pyrrTFSI), which shows two …

The Effect Of Curing And Zirconium Content On The Wettability And Structure Of A Silicate Hybrid Sol-Gel Material, Emma Machugh, Maikki Cullen, Alicja Kaworek, Brendan Duffy, Mohamed Oubaha

Articles

Functional hybrid sol-gel coatings have been developed for numerous applications with a wide range of wettabilities. This study proposes to investigate the relationship between the structure and the wetting properties of a zirconium modified silicate hybrid sol-gel coating. The structures of the coatings were altered by varying the content of zirconium, and the curing process, while keeping the sol-gel preparation conditions identical. The structure of the materials was characterized by FTIR, 29Si NMR and SEM. The thermal properties and the wettability are identified by DSC and contact angle measurements, respectively. By corroborating the structural and wettability analyses, it is shown …

Oxidative Degradation Of Lignin And Investigation Of Utilization Of Lignin-Derived Materials As Building Blocks For Epoxy Resins, Zhen Fang

Theses and Dissertations--Chemistry

Lignin, the second most abundant biopolymer on earth, is potentially a replaceable source for bulky fuels and chemical feedstocks. There have been numerous reports on methods for the oxidative cleavage of β-O-4 linkages but relatively few reports of how those methods affect other linkages that are present in lignin. We investigated how the β-1 and β-5 linkages respond under oxidative conditions proposed for lignin deconstruction based on their effect on β-O-4 linkages. Mechanochemical treatment of lignin can greatly improve the yield of monomer products and we applied a mechanochemical approach, using powerful ring-and-puck milling to promote lignin degradation. Along with …